kernel-fxtec-pro1x/arch/sh/boards/overdrive/fpga.c
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00

133 lines
3.3 KiB
C

/*
* Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* This file handles programming up the Altera Flex10K that interfaces to
* the Galileo, and does the PS/2 keyboard and mouse
*
*/
#include <linux/kernel.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <asm/overdriver/gt64111.h>
#include <asm/overdrive/overdrive.h>
#include <asm/overdrive/fpga.h>
#define FPGA_NotConfigHigh() (*FPGA_ControlReg) = (*FPGA_ControlReg) | ENABLE_FPGA_BIT
#define FPGA_NotConfigLow() (*FPGA_ControlReg) = (*FPGA_ControlReg) & RESET_FPGA_MASK
/* I need to find out what (if any) the real delay factor here is */
/* The delay is definately not critical */
#define long_delay() {int i;for(i=0;i<10000;i++);}
#define short_delay() {int i;for(i=0;i<100;i++);}
static void __init program_overdrive_fpga(const unsigned char *fpgacode,
int size)
{
int timeout = 0;
int i, j;
unsigned char b;
static volatile unsigned char *FPGA_ControlReg =
(volatile unsigned char *) (OVERDRIVE_CTRL);
static volatile unsigned char *FPGA_ProgramReg =
(volatile unsigned char *) (FPGA_DCLK_ADDRESS);
printk("FPGA: Commencing FPGA Programming\n");
/* The PCI reset but MUST be low when programming the FPGA !!! */
b = (*FPGA_ControlReg) & RESET_PCI_MASK;
(*FPGA_ControlReg) = b;
/* Prepare FPGA to program */
FPGA_NotConfigHigh();
long_delay();
FPGA_NotConfigLow();
short_delay();
while ((*FPGA_ProgramReg & FPGA_NOT_STATUS) != 0) {
printk("FPGA: Waiting for NotStatus to go Low ... \n");
}
FPGA_NotConfigHigh();
/* Wait for FPGA "ready to be programmed" signal */
printk("FPGA: Waiting for NotStatus to go high (FPGA ready)... \n");
for (timeout = 0;
(((*FPGA_ProgramReg & FPGA_NOT_STATUS) == 0)
&& (timeout < FPGA_TIMEOUT)); timeout++);
/* Check if timeout condition occured - i.e. an error */
if (timeout == FPGA_TIMEOUT) {
printk
("FPGA: Failed to program - Timeout waiting for notSTATUS to go high\n");
return;
}
printk("FPGA: Copying data to FPGA ... %d bytes\n", size);
/* Copy array to FPGA - bit at a time */
for (i = 0; i < size; i++) {
volatile unsigned w = 0;
for (j = 0; j < 8; j++) {
*FPGA_ProgramReg = (fpgacode[i] >> j) & 0x01;
short_delay();
}
if ((i & 0x3ff) == 0) {
printk(".");
}
}
/* Waiting for CONFDONE to go high - means the program is complete */
for (timeout = 0;
(((*FPGA_ProgramReg & FPGA_CONFDONE) == 0)
&& (timeout < FPGA_TIMEOUT)); timeout++) {
*FPGA_ProgramReg = 0x0;
long_delay();
}
if (timeout == FPGA_TIMEOUT) {
printk
("FPGA: Failed to program - Timeout waiting for CONFDONE to go high\n");
return;
} else { /* Clock another 10 times - gets the device into a working state */
for (i = 0; i < 10; i++) {
*FPGA_ProgramReg = 0x0;
short_delay();
}
}
printk("FPGA: Programming complete\n");
}
static const unsigned char __init fpgacode[] = {
#include "./overdrive.ttf" /* Code from maxplus2 compiler */
, 0, 0
};
int __init init_overdrive_fpga(void)
{
program_overdrive_fpga(fpgacode, sizeof(fpgacode));
return 0;
}