f19768ce0e
Implement an ARM delay timer to be used for udelay() on orion legacy platforms. This allows us to skip the delay loop calibration at boot. It also means that udelay() will be unaffected by CPU frequency changes when cpufreq is enabled on these platforms. Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
242 lines
5.5 KiB
C
242 lines
5.5 KiB
C
/*
|
|
* arch/arm/plat-orion/time.c
|
|
*
|
|
* Marvell Orion SoC timer handling.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*
|
|
* Timer 0 is used as free-running clocksource, while timer 1 is
|
|
* used as clock_event_device.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/sched_clock.h>
|
|
#include <plat/time.h>
|
|
#include <asm/delay.h>
|
|
|
|
/*
|
|
* MBus bridge block registers.
|
|
*/
|
|
#define BRIDGE_CAUSE_OFF 0x0110
|
|
#define BRIDGE_MASK_OFF 0x0114
|
|
#define BRIDGE_INT_TIMER0 0x0002
|
|
#define BRIDGE_INT_TIMER1 0x0004
|
|
|
|
|
|
/*
|
|
* Timer block registers.
|
|
*/
|
|
#define TIMER_CTRL_OFF 0x0000
|
|
#define TIMER0_EN 0x0001
|
|
#define TIMER0_RELOAD_EN 0x0002
|
|
#define TIMER1_EN 0x0004
|
|
#define TIMER1_RELOAD_EN 0x0008
|
|
#define TIMER0_RELOAD_OFF 0x0010
|
|
#define TIMER0_VAL_OFF 0x0014
|
|
#define TIMER1_RELOAD_OFF 0x0018
|
|
#define TIMER1_VAL_OFF 0x001c
|
|
|
|
|
|
/*
|
|
* SoC-specific data.
|
|
*/
|
|
static void __iomem *bridge_base;
|
|
static u32 bridge_timer1_clr_mask;
|
|
static void __iomem *timer_base;
|
|
|
|
|
|
/*
|
|
* Number of timer ticks per jiffy.
|
|
*/
|
|
static u32 ticks_per_jiffy;
|
|
|
|
|
|
/*
|
|
* Orion's sched_clock implementation. It has a resolution of
|
|
* at least 7.5ns (133MHz TCLK).
|
|
*/
|
|
|
|
static u64 notrace orion_read_sched_clock(void)
|
|
{
|
|
return ~readl(timer_base + TIMER0_VAL_OFF);
|
|
}
|
|
|
|
/*
|
|
* Clockevent handling.
|
|
*/
|
|
static int
|
|
orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
|
|
{
|
|
unsigned long flags;
|
|
u32 u;
|
|
|
|
if (delta == 0)
|
|
return -ETIME;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/*
|
|
* Clear and enable clockevent timer interrupt.
|
|
*/
|
|
writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
|
|
|
|
u = readl(bridge_base + BRIDGE_MASK_OFF);
|
|
u |= BRIDGE_INT_TIMER1;
|
|
writel(u, bridge_base + BRIDGE_MASK_OFF);
|
|
|
|
/*
|
|
* Setup new clockevent timer value.
|
|
*/
|
|
writel(delta, timer_base + TIMER1_VAL_OFF);
|
|
|
|
/*
|
|
* Enable the timer.
|
|
*/
|
|
u = readl(timer_base + TIMER_CTRL_OFF);
|
|
u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN;
|
|
writel(u, timer_base + TIMER_CTRL_OFF);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orion_clkevt_shutdown(struct clock_event_device *evt)
|
|
{
|
|
unsigned long flags;
|
|
u32 u;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* Disable timer */
|
|
u = readl(timer_base + TIMER_CTRL_OFF);
|
|
writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
|
|
|
|
/* Disable timer interrupt */
|
|
u = readl(bridge_base + BRIDGE_MASK_OFF);
|
|
writel(u & ~BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
|
|
|
|
/* ACK pending timer interrupt */
|
|
writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orion_clkevt_set_periodic(struct clock_event_device *evt)
|
|
{
|
|
unsigned long flags;
|
|
u32 u;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* Setup timer to fire at 1/HZ intervals */
|
|
writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
|
|
writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
|
|
|
|
/* Enable timer interrupt */
|
|
u = readl(bridge_base + BRIDGE_MASK_OFF);
|
|
writel(u | BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
|
|
|
|
/* Enable timer */
|
|
u = readl(timer_base + TIMER_CTRL_OFF);
|
|
writel(u | TIMER1_EN | TIMER1_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct clock_event_device orion_clkevt = {
|
|
.name = "orion_tick",
|
|
.features = CLOCK_EVT_FEAT_ONESHOT |
|
|
CLOCK_EVT_FEAT_PERIODIC,
|
|
.rating = 300,
|
|
.set_next_event = orion_clkevt_next_event,
|
|
.set_state_shutdown = orion_clkevt_shutdown,
|
|
.set_state_periodic = orion_clkevt_set_periodic,
|
|
.set_state_oneshot = orion_clkevt_shutdown,
|
|
.tick_resume = orion_clkevt_shutdown,
|
|
};
|
|
|
|
static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
/*
|
|
* ACK timer interrupt and call event handler.
|
|
*/
|
|
writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
|
|
orion_clkevt.event_handler(&orion_clkevt);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction orion_timer_irq = {
|
|
.name = "orion_tick",
|
|
.flags = IRQF_TIMER,
|
|
.handler = orion_timer_interrupt
|
|
};
|
|
|
|
void __init
|
|
orion_time_set_base(void __iomem *_timer_base)
|
|
{
|
|
timer_base = _timer_base;
|
|
}
|
|
|
|
static unsigned long orion_delay_timer_read(void)
|
|
{
|
|
return ~readl(timer_base + TIMER0_VAL_OFF);
|
|
}
|
|
|
|
static struct delay_timer orion_delay_timer = {
|
|
.read_current_timer = orion_delay_timer_read,
|
|
};
|
|
|
|
void __init
|
|
orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
|
|
unsigned int irq, unsigned int tclk)
|
|
{
|
|
u32 u;
|
|
|
|
/*
|
|
* Set SoC-specific data.
|
|
*/
|
|
bridge_base = _bridge_base;
|
|
bridge_timer1_clr_mask = _bridge_timer1_clr_mask;
|
|
|
|
ticks_per_jiffy = (tclk + HZ/2) / HZ;
|
|
|
|
orion_delay_timer.freq = tclk;
|
|
register_current_timer_delay(&orion_delay_timer);
|
|
|
|
/*
|
|
* Set scale and timer for sched_clock.
|
|
*/
|
|
sched_clock_register(orion_read_sched_clock, 32, tclk);
|
|
|
|
/*
|
|
* Setup free-running clocksource timer (interrupts
|
|
* disabled).
|
|
*/
|
|
writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
|
|
writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
|
|
u = readl(bridge_base + BRIDGE_MASK_OFF);
|
|
writel(u & ~BRIDGE_INT_TIMER0, bridge_base + BRIDGE_MASK_OFF);
|
|
u = readl(timer_base + TIMER_CTRL_OFF);
|
|
writel(u | TIMER0_EN | TIMER0_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
|
|
clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, "orion_clocksource",
|
|
tclk, 300, 32, clocksource_mmio_readl_down);
|
|
|
|
/*
|
|
* Setup clockevent timer (interrupt-driven).
|
|
*/
|
|
setup_irq(irq, &orion_timer_irq);
|
|
orion_clkevt.cpumask = cpumask_of(0);
|
|
clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe);
|
|
}
|