Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/usb/host/fhci-tds.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

626 lines
16 KiB
C
Raw Blame History

/*
* Freescale QUICC Engine USB Host Controller Driver
*
* Copyright (c) Freescale Semicondutor, Inc. 2006.
* Shlomi Gridish <gridish@freescale.com>
* Jerry Huang <Chang-Ming.Huang@freescale.com>
* Copyright (c) Logic Product Development, Inc. 2007
* Peter Barada <peterb@logicpd.com>
* Copyright (c) MontaVista Software, Inc. 2008.
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/io.h>
#include <linux/usb.h>
#include "../core/hcd.h"
#include "fhci.h"
#define DUMMY_BD_BUFFER 0xdeadbeef
#define DUMMY2_BD_BUFFER 0xbaadf00d
/* Transaction Descriptors bits */
#define TD_R 0x8000 /* ready bit */
#define TD_W 0x2000 /* wrap bit */
#define TD_I 0x1000 /* interrupt on completion */
#define TD_L 0x0800 /* last */
#define TD_TC 0x0400 /* transmit CRC */
#define TD_CNF 0x0200 /* CNF - Must be always 1 */
#define TD_LSP 0x0100 /* Low-speed transaction */
#define TD_PID 0x00c0 /* packet id */
#define TD_RXER 0x0020 /* Rx error or not */
#define TD_NAK 0x0010 /* No ack. */
#define TD_STAL 0x0008 /* Stall recieved */
#define TD_TO 0x0004 /* time out */
#define TD_UN 0x0002 /* underrun */
#define TD_NO 0x0010 /* Rx Non Octet Aligned Packet */
#define TD_AB 0x0008 /* Frame Aborted */
#define TD_CR 0x0004 /* CRC Error */
#define TD_OV 0x0002 /* Overrun */
#define TD_BOV 0x0001 /* Buffer Overrun */
#define TD_ERRORS (TD_NAK | TD_STAL | TD_TO | TD_UN | \
TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV)
#define TD_PID_DATA0 0x0080 /* Data 0 toggle */
#define TD_PID_DATA1 0x00c0 /* Data 1 toggle */
#define TD_PID_TOGGLE 0x00c0 /* Data 0/1 toggle mask */
#define TD_TOK_SETUP 0x0000
#define TD_TOK_OUT 0x4000
#define TD_TOK_IN 0x8000
#define TD_ISO 0x1000
#define TD_ENDP 0x0780
#define TD_ADDR 0x007f
#define TD_ENDP_SHIFT 7
struct usb_td {
__be16 status;
__be16 length;
__be32 buf_ptr;
__be16 extra;
__be16 reserved;
};
static struct usb_td __iomem *next_bd(struct usb_td __iomem *base,
struct usb_td __iomem *td,
u16 status)
{
if (status & TD_W)
return base;
else
return ++td;
}
void fhci_push_dummy_bd(struct endpoint *ep)
{
if (ep->already_pushed_dummy_bd == false) {
u16 td_status = in_be16(&ep->empty_td->status);
out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER);
/* get the next TD in the ring */
ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
ep->already_pushed_dummy_bd = true;
}
}
/* destroy an USB endpoint */
void fhci_ep0_free(struct fhci_usb *usb)
{
struct endpoint *ep;
int size;
ep = usb->ep0;
if (ep) {
if (ep->td_base)
cpm_muram_free(cpm_muram_offset(ep->td_base));
if (kfifo_initialized(&ep->conf_frame_Q)) {
size = cq_howmany(&ep->conf_frame_Q);
for (; size; size--) {
struct packet *pkt = cq_get(&ep->conf_frame_Q);
kfree(pkt);
}
cq_delete(&ep->conf_frame_Q);
}
if (kfifo_initialized(&ep->empty_frame_Q)) {
size = cq_howmany(&ep->empty_frame_Q);
for (; size; size--) {
struct packet *pkt = cq_get(&ep->empty_frame_Q);
kfree(pkt);
}
cq_delete(&ep->empty_frame_Q);
}
if (kfifo_initialized(&ep->dummy_packets_Q)) {
size = cq_howmany(&ep->dummy_packets_Q);
for (; size; size--) {
u8 *buff = cq_get(&ep->dummy_packets_Q);
kfree(buff);
}
cq_delete(&ep->dummy_packets_Q);
}
kfree(ep);
usb->ep0 = NULL;
}
}
/*
* create the endpoint structure
*
* arguments:
* usb A pointer to the data structure of the USB
* data_mem The data memory partition(BUS)
* ring_len TD ring length
*/
u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
u32 ring_len)
{
struct endpoint *ep;
struct usb_td __iomem *td;
unsigned long ep_offset;
char *err_for = "enpoint PRAM";
int ep_mem_size;
u32 i;
/* we need at least 3 TDs in the ring */
if (!(ring_len > 2)) {
fhci_err(usb->fhci, "illegal TD ring length parameters\n");
return -EINVAL;
}
ep = kzalloc(sizeof(*ep), GFP_KERNEL);
if (!ep)
return -ENOMEM;
ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram);
ep_offset = cpm_muram_alloc(ep_mem_size, 32);
if (IS_ERR_VALUE(ep_offset))
goto err;
ep->td_base = cpm_muram_addr(ep_offset);
/* zero all queue pointers */
if (cq_new(&ep->conf_frame_Q, ring_len + 2) ||
cq_new(&ep->empty_frame_Q, ring_len + 2) ||
cq_new(&ep->dummy_packets_Q, ring_len + 2)) {
err_for = "frame_queues";
goto err;
}
for (i = 0; i < (ring_len + 1); i++) {
struct packet *pkt;
u8 *buff;
pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
if (!pkt) {
err_for = "frame";
goto err;
}
buff = kmalloc(1028 * sizeof(*buff), GFP_KERNEL);
if (!buff) {
kfree(pkt);
err_for = "buffer";
goto err;
}
cq_put(&ep->empty_frame_Q, pkt);
cq_put(&ep->dummy_packets_Q, buff);
}
/* we put the endpoint parameter RAM right behind the TD ring */
ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len;
ep->conf_td = ep->td_base;
ep->empty_td = ep->td_base;
ep->already_pushed_dummy_bd = false;
/* initialize tds */
td = ep->td_base;
for (i = 0; i < ring_len; i++) {
out_be32(&td->buf_ptr, 0);
out_be16(&td->status, 0);
out_be16(&td->length, 0);
out_be16(&td->extra, 0);
td++;
}
td--;
out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
out_be16(&td->length, 0);
/* endpoint structure has been created */
usb->ep0 = ep;
return 0;
err:
fhci_ep0_free(usb);
kfree(ep);
fhci_err(usb->fhci, "no memory for the %s\n", err_for);
return -ENOMEM;
}
/*
* initialize the endpoint register according to the given parameters
*
* artuments:
* usb A pointer to the data strucutre of the USB
* ep A pointer to the endpoint structre
* data_mem The data memory partition(BUS)
*/
void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
enum fhci_mem_alloc data_mem)
{
u8 rt;
/* set the endpoint registers according to the endpoint */
out_be16(&usb->fhci->regs->usb_ep[0],
USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE);
out_be16(&usb->fhci->pram->ep_ptr[0],
cpm_muram_offset(ep->ep_pram_ptr));
rt = (BUS_MODE_BO_BE | BUS_MODE_GBL);
#ifdef MULTI_DATA_BUS
if (data_mem == MEM_SECONDARY)
rt |= BUS_MODE_DTB;
#endif
out_8(&ep->ep_pram_ptr->rx_func_code, rt);
out_8(&ep->ep_pram_ptr->tx_func_code, rt);
out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028);
out_be16(&ep->ep_pram_ptr->rx_base, 0);
out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base));
out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0);
out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base));
out_be32(&ep->ep_pram_ptr->tx_state, 0);
}
/*
* Collect the submitted frames and inform the application about them
* It is also prepearing the TDs for new frames. If the Tx interrupts
* are diabled, the application should call that routine to get
* confirmation about the submitted frames. Otherwise, the routine is
* called frome the interrupt service routine during the Tx interrupt.
* In that case the application is informed by calling the application
* specific 'fhci_transaction_confirm' routine
*/
static void fhci_td_transaction_confirm(struct fhci_usb *usb)
{
struct endpoint *ep = usb->ep0;
struct packet *pkt;
struct usb_td __iomem *td;
u16 extra_data;
u16 td_status;
u16 td_length;
u32 buf;
/*
* collect transmitted BDs from the chip. The routine clears all BDs
* with R bit = 0 and the pointer to data buffer is not NULL, that is
* BDs which point to the transmitted data buffer
*/
while (1) {
td = ep->conf_td;
td_status = in_be16(&td->status);
td_length = in_be16(&td->length);
buf = in_be32(&td->buf_ptr);
extra_data = in_be16(&td->extra);
/* check if the TD is empty */
if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf)))
break;
/* check if it is a dummy buffer */
else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W))
break;
/* mark TD as empty */
clrbits16(&td->status, ~TD_W);
out_be16(&td->length, 0);
out_be32(&td->buf_ptr, 0);
out_be16(&td->extra, 0);
/* advance the TD pointer */
ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status);
/* check if it is a dummy buffer(type2) */
if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W))
continue;
pkt = cq_get(&ep->conf_frame_Q);
if (!pkt)
fhci_err(usb->fhci, "no frame to confirm\n");
if (td_status & TD_ERRORS) {
if (td_status & TD_RXER) {
if (td_status & TD_CR)
pkt->status = USB_TD_RX_ER_CRC;
else if (td_status & TD_AB)
pkt->status = USB_TD_RX_ER_BITSTUFF;
else if (td_status & TD_OV)
pkt->status = USB_TD_RX_ER_OVERUN;
else if (td_status & TD_BOV)
pkt->status = USB_TD_RX_DATA_OVERUN;
else if (td_status & TD_NO)
pkt->status = USB_TD_RX_ER_NONOCT;
else
fhci_err(usb->fhci, "illegal error "
"occured\n");
} else if (td_status & TD_NAK)
pkt->status = USB_TD_TX_ER_NAK;
else if (td_status & TD_TO)
pkt->status = USB_TD_TX_ER_TIMEOUT;
else if (td_status & TD_UN)
pkt->status = USB_TD_TX_ER_UNDERUN;
else if (td_status & TD_STAL)
pkt->status = USB_TD_TX_ER_STALL;
else
fhci_err(usb->fhci, "illegal error occured\n");
} else if ((extra_data & TD_TOK_IN) &&
pkt->len > td_length - CRC_SIZE) {
pkt->status = USB_TD_RX_DATA_UNDERUN;
}
if (extra_data & TD_TOK_IN)
pkt->len = td_length - CRC_SIZE;
else if (pkt->info & PKT_ZLP)
pkt->len = 0;
else
pkt->len = td_length;
fhci_transaction_confirm(usb, pkt);
}
}
/*
* Submitting a data frame to a specified endpoint of a USB device
* The frame is put in the driver's transmit queue for this endpoint
*
* Arguments:
* usb A pointer to the USB structure
* pkt A pointer to the user frame structure
* trans_type Transaction tyep - IN,OUT or SETUP
* dest_addr Device address - 0~127
* dest_ep Endpoint number of the device - 0~16
* trans_mode Pipe type - ISO,Interrupt,bulk or control
* dest_speed USB speed - Low speed or FULL speed
* data_toggle Data sequence toggle - 0 or 1
*/
u32 fhci_host_transaction(struct fhci_usb *usb,
struct packet *pkt,
enum fhci_ta_type trans_type,
u8 dest_addr,
u8 dest_ep,
enum fhci_tf_mode trans_mode,
enum fhci_speed dest_speed, u8 data_toggle)
{
struct endpoint *ep = usb->ep0;
struct usb_td __iomem *td;
u16 extra_data;
u16 td_status;
fhci_usb_disable_interrupt(usb);
/* start from the next BD that should be filled */
td = ep->empty_td;
td_status = in_be16(&td->status);
if (td_status & TD_R && in_be16(&td->length)) {
/* if the TD is not free */
fhci_usb_enable_interrupt(usb);
return -1;
}
/* get the next TD in the ring */
ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
fhci_usb_enable_interrupt(usb);
pkt->priv_data = td;
out_be32(&td->buf_ptr, virt_to_phys(pkt->data));
/* sets up transaction parameters - addr,endp,dir,and type */
extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr;
switch (trans_type) {
case FHCI_TA_IN:
extra_data |= TD_TOK_IN;
break;
case FHCI_TA_OUT:
extra_data |= TD_TOK_OUT;
break;
case FHCI_TA_SETUP:
extra_data |= TD_TOK_SETUP;
break;
}
if (trans_mode == FHCI_TF_ISO)
extra_data |= TD_ISO;
out_be16(&td->extra, extra_data);
/* sets up the buffer descriptor */
td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF);
if (!(pkt->info & PKT_NO_CRC))
td_status |= TD_TC;
switch (trans_type) {
case FHCI_TA_IN:
if (data_toggle)
pkt->info |= PKT_PID_DATA1;
else
pkt->info |= PKT_PID_DATA0;
break;
default:
if (data_toggle) {
td_status |= TD_PID_DATA1;
pkt->info |= PKT_PID_DATA1;
} else {
td_status |= TD_PID_DATA0;
pkt->info |= PKT_PID_DATA0;
}
break;
}
if ((dest_speed == FHCI_LOW_SPEED) &&
(usb->port_status == FHCI_PORT_FULL))
td_status |= TD_LSP;
out_be16(&td->status, td_status);
/* set up buffer length */
if (trans_type == FHCI_TA_IN)
out_be16(&td->length, pkt->len + CRC_SIZE);
else
out_be16(&td->length, pkt->len);
/* put the frame to the confirmation queue */
cq_put(&ep->conf_frame_Q, pkt);
if (cq_howmany(&ep->conf_frame_Q) == 1)
out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
return 0;
}
/* Reset the Tx BD ring */
void fhci_flush_bds(struct fhci_usb *usb)
{
u16 extra_data;
u16 td_status;
u32 buf;
struct usb_td __iomem *td;
struct endpoint *ep = usb->ep0;
td = ep->td_base;
while (1) {
td_status = in_be16(&td->status);
buf = in_be32(&td->buf_ptr);
extra_data = in_be16(&td->extra);
/* if the TD is not empty - we'll confirm it as Timeout */
if (td_status & TD_R)
out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
/* if this TD is dummy - let's skip this TD */
else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER)
out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER);
/* if this is the last TD - break */
if (td_status & TD_W)
break;
td++;
}
fhci_td_transaction_confirm(usb);
td = ep->td_base;
do {
out_be16(&td->status, 0);
out_be16(&td->length, 0);
out_be32(&td->buf_ptr, 0);
out_be16(&td->extra, 0);
td++;
} while (!(in_be16(&td->status) & TD_W));
out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
out_be16(&td->length, 0);
out_be32(&td->buf_ptr, 0);
out_be16(&td->extra, 0);
out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
in_be16(&ep->ep_pram_ptr->tx_base));
out_be32(&ep->ep_pram_ptr->tx_state, 0);
out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
ep->empty_td = ep->td_base;
ep->conf_td = ep->td_base;
}
/*
* Flush all transmitted packets from TDs in the actual frame.
* This routine is called when something wrong with the controller and
* we want to get rid of the actual frame and start again next frame
*/
void fhci_flush_actual_frame(struct fhci_usb *usb)
{
u8 mode;
u16 tb_ptr;
u16 extra_data;
u16 td_status;
u32 buf_ptr;
struct usb_td __iomem *td;
struct endpoint *ep = usb->ep0;
/* disable the USB controller */
mode = in_8(&usb->fhci->regs->usb_mod);
out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN);
tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
td = cpm_muram_addr(tb_ptr);
td_status = in_be16(&td->status);
buf_ptr = in_be32(&td->buf_ptr);
extra_data = in_be16(&td->extra);
do {
if (td_status & TD_R) {
out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
} else {
out_be32(&td->buf_ptr, 0);
ep->already_pushed_dummy_bd = false;
break;
}
/* advance the TD pointer */
td = next_bd(ep->td_base, td, td_status);
td_status = in_be16(&td->status);
buf_ptr = in_be32(&td->buf_ptr);
extra_data = in_be16(&td->extra);
} while ((td_status & TD_R) || buf_ptr);
fhci_td_transaction_confirm(usb);
out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
in_be16(&ep->ep_pram_ptr->tx_base));
out_be32(&ep->ep_pram_ptr->tx_state, 0);
out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
ep->empty_td = ep->td_base;
ep->conf_td = ep->td_base;
usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
/* reset the event register */
out_be16(&usb->fhci->regs->usb_event, 0xffff);
/* enable the USB controller */
out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
}
/* handles Tx confirm and Tx error interrupt */
void fhci_tx_conf_interrupt(struct fhci_usb *usb)
{
fhci_td_transaction_confirm(usb);
/*
* Schedule another transaction to this frame only if we have
* already confirmed all transaction in the frame.
*/
if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) ||
(usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) &&
(list_empty(&usb->actual_frame->tds_list)))
fhci_schedule_transactions(usb);
}
void fhci_host_transmit_actual_frame(struct fhci_usb *usb)
{
u16 tb_ptr;
u16 td_status;
struct usb_td __iomem *td;
struct endpoint *ep = usb->ep0;
tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
td = cpm_muram_addr(tb_ptr);
if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) {
struct usb_td __iomem *old_td = td;
ep->already_pushed_dummy_bd = false;
td_status = in_be16(&td->status);
/* gets the next TD in the ring */
td = next_bd(ep->td_base, td, td_status);
tb_ptr = cpm_muram_offset(td);
out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr);
/* start transmit only if we have something in the TDs */
if (in_be16(&td->status) & TD_R)
out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) {
out_be32(&old_td->buf_ptr, 0);
ep->conf_td = next_bd(ep->td_base, ep->conf_td,
td_status);
} else {
out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER);
}
}
}
Reference in a new issue View git blame Copy permalink