1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
586 lines
15 KiB
C
586 lines
15 KiB
C
/*
|
|
* cycx_drv.c Cyclom 2X Support Module.
|
|
*
|
|
* This module is a library of common hardware specific
|
|
* functions used by the Cyclades Cyclom 2X sync card.
|
|
*
|
|
* Author: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
|
|
*
|
|
* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo
|
|
*
|
|
* Based on sdladrv.c by Gene Kozin <genek@compuserve.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
* ============================================================================
|
|
* 1999/11/11 acme set_current_state(TASK_INTERRUPTIBLE), code
|
|
* cleanup
|
|
* 1999/11/08 acme init_cyc2x deleted, doing nothing
|
|
* 1999/11/06 acme back to read[bw], write[bw] and memcpy_to and
|
|
* fromio to use dpmbase ioremaped
|
|
* 1999/10/26 acme use isa_read[bw], isa_write[bw] & isa_memcpy_to
|
|
* & fromio
|
|
* 1999/10/23 acme cleanup to only supports cyclom2x: all the other
|
|
* boards are no longer manufactured by cyclades,
|
|
* if someone wants to support them... be my guest!
|
|
* 1999/05/28 acme cycx_intack & cycx_intde gone for good
|
|
* 1999/05/18 acme lots of unlogged work, submitting to Linus...
|
|
* 1999/01/03 acme more judicious use of data types
|
|
* 1999/01/03 acme judicious use of data types :>
|
|
* cycx_inten trying to reset pending interrupts
|
|
* from cyclom 2x - I think this isn't the way to
|
|
* go, but for now...
|
|
* 1999/01/02 acme cycx_intack ok, I think there's nothing to do
|
|
* to ack an int in cycx_drv.c, only handle it in
|
|
* cyx_isr (or in the other protocols: cyp_isr,
|
|
* cyf_isr, when they get implemented.
|
|
* Dec 31, 1998 acme cycx_data_boot & cycx_code_boot fixed, crossing
|
|
* fingers to see x25_configure in cycx_x25.c
|
|
* work... :)
|
|
* Dec 26, 1998 acme load implementation fixed, seems to work! :)
|
|
* cycx_2x_dpmbase_options with all the possible
|
|
* DPM addresses (20).
|
|
* cycx_intr implemented (test this!)
|
|
* general code cleanup
|
|
* Dec 8, 1998 Ivan Passos Cyclom-2X firmware load implementation.
|
|
* Aug 8, 1998 acme Initial version.
|
|
*/
|
|
|
|
#include <linux/init.h> /* __init */
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h> /* printk(), and other useful stuff */
|
|
#include <linux/stddef.h> /* offsetof(), etc. */
|
|
#include <linux/errno.h> /* return codes */
|
|
#include <linux/sched.h> /* for jiffies, HZ, etc. */
|
|
#include <linux/cycx_drv.h> /* API definitions */
|
|
#include <linux/cycx_cfm.h> /* CYCX firmware module definitions */
|
|
#include <linux/delay.h> /* udelay */
|
|
#include <asm/io.h> /* read[wl], write[wl], ioremap, iounmap */
|
|
|
|
#define MOD_VERSION 0
|
|
#define MOD_RELEASE 6
|
|
|
|
MODULE_AUTHOR("Arnaldo Carvalho de Melo");
|
|
MODULE_DESCRIPTION("Cyclom 2x Sync Card Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* Hardware-specific functions */
|
|
static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len);
|
|
static void cycx_bootcfg(struct cycx_hw *hw);
|
|
|
|
static int reset_cyc2x(void __iomem *addr);
|
|
static int detect_cyc2x(void __iomem *addr);
|
|
|
|
/* Miscellaneous functions */
|
|
static void delay_cycx(int sec);
|
|
static int get_option_index(long *optlist, long optval);
|
|
static u16 checksum(u8 *buf, u32 len);
|
|
|
|
#define wait_cyc(addr) cycx_exec(addr + CMD_OFFSET)
|
|
|
|
/* Global Data */
|
|
|
|
/* private data */
|
|
static char modname[] = "cycx_drv";
|
|
static char fullname[] = "Cyclom 2X Support Module";
|
|
static char copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo "
|
|
"<acme@conectiva.com.br>";
|
|
|
|
/* Hardware configuration options.
|
|
* These are arrays of configuration options used by verification routines.
|
|
* The first element of each array is its size (i.e. number of options).
|
|
*/
|
|
static long cyc2x_dpmbase_options[] = {
|
|
20,
|
|
0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000, 0xB8000,
|
|
0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000, 0xD0000, 0xD4000,
|
|
0xD8000, 0xDC000, 0xE0000, 0xE4000, 0xE8000, 0xEC000
|
|
};
|
|
|
|
static long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 };
|
|
|
|
/* Kernel Loadable Module Entry Points */
|
|
/* Module 'insert' entry point.
|
|
* o print announcement
|
|
* o initialize static data
|
|
*
|
|
* Return: 0 Ok
|
|
* < 0 error.
|
|
* Context: process */
|
|
|
|
int __init cycx_drv_init(void)
|
|
{
|
|
printk(KERN_INFO "%s v%u.%u %s\n", fullname, MOD_VERSION, MOD_RELEASE,
|
|
copyright);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Module 'remove' entry point.
|
|
* o release all remaining system resources */
|
|
void cycx_drv_cleanup(void)
|
|
{
|
|
}
|
|
|
|
/* Kernel APIs */
|
|
/* Set up adapter.
|
|
* o detect adapter type
|
|
* o verify hardware configuration options
|
|
* o check for hardware conflicts
|
|
* o set up adapter shared memory
|
|
* o test adapter memory
|
|
* o load firmware
|
|
* Return: 0 ok.
|
|
* < 0 error */
|
|
EXPORT_SYMBOL(cycx_setup);
|
|
int cycx_setup(struct cycx_hw *hw, void *cfm, u32 len, unsigned long dpmbase)
|
|
{
|
|
int err;
|
|
|
|
/* Verify IRQ configuration options */
|
|
if (!get_option_index(cycx_2x_irq_options, hw->irq)) {
|
|
printk(KERN_ERR "%s: IRQ %d is invalid!\n", modname, hw->irq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Setup adapter dual-port memory window and test memory */
|
|
if (!dpmbase) {
|
|
printk(KERN_ERR "%s: you must specify the dpm address!\n",
|
|
modname);
|
|
return -EINVAL;
|
|
} else if (!get_option_index(cyc2x_dpmbase_options, dpmbase)) {
|
|
printk(KERN_ERR "%s: memory address 0x%lX is invalid!\n",
|
|
modname, dpmbase);
|
|
return -EINVAL;
|
|
}
|
|
|
|
hw->dpmbase = ioremap(dpmbase, CYCX_WINDOWSIZE);
|
|
hw->dpmsize = CYCX_WINDOWSIZE;
|
|
|
|
if (!detect_cyc2x(hw->dpmbase)) {
|
|
printk(KERN_ERR "%s: adapter Cyclom 2X not found at "
|
|
"address 0x%lX!\n", modname, dpmbase);
|
|
return -EINVAL;
|
|
}
|
|
|
|
printk(KERN_INFO "%s: found Cyclom 2X card at address 0x%lX.\n",
|
|
modname, dpmbase);
|
|
|
|
/* Load firmware. If loader fails then shut down adapter */
|
|
err = load_cyc2x(hw, cfm, len);
|
|
|
|
if (err)
|
|
cycx_down(hw); /* shutdown adapter */
|
|
|
|
return err;
|
|
}
|
|
|
|
EXPORT_SYMBOL(cycx_down);
|
|
int cycx_down(struct cycx_hw *hw)
|
|
{
|
|
iounmap(hw->dpmbase);
|
|
return 0;
|
|
}
|
|
|
|
/* Enable interrupt generation. */
|
|
EXPORT_SYMBOL(cycx_inten);
|
|
void cycx_inten(struct cycx_hw *hw)
|
|
{
|
|
writeb(0, hw->dpmbase);
|
|
}
|
|
|
|
/* Generate an interrupt to adapter's CPU. */
|
|
EXPORT_SYMBOL(cycx_intr);
|
|
void cycx_intr(struct cycx_hw *hw)
|
|
{
|
|
writew(0, hw->dpmbase + GEN_CYCX_INTR);
|
|
}
|
|
|
|
/* Execute Adapter Command.
|
|
* o Set exec flag.
|
|
* o Busy-wait until flag is reset. */
|
|
EXPORT_SYMBOL(cycx_exec);
|
|
int cycx_exec(void __iomem *addr)
|
|
{
|
|
u16 i = 0;
|
|
/* wait till addr content is zeroed */
|
|
|
|
while (readw(addr)) {
|
|
udelay(1000);
|
|
|
|
if (++i > 50)
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Read absolute adapter memory.
|
|
* Transfer data from adapter's memory to data buffer. */
|
|
EXPORT_SYMBOL(cycx_peek);
|
|
int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len)
|
|
{
|
|
if (len == 1)
|
|
*(u8*)buf = readb(hw->dpmbase + addr);
|
|
else
|
|
memcpy_fromio(buf, hw->dpmbase + addr, len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Write Absolute Adapter Memory.
|
|
* Transfer data from data buffer to adapter's memory. */
|
|
EXPORT_SYMBOL(cycx_poke);
|
|
int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len)
|
|
{
|
|
if (len == 1)
|
|
writeb(*(u8*)buf, hw->dpmbase + addr);
|
|
else
|
|
memcpy_toio(hw->dpmbase + addr, buf, len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Hardware-Specific Functions */
|
|
|
|
/* Load Aux Routines */
|
|
/* Reset board hardware.
|
|
return 1 if memory exists at addr and 0 if not. */
|
|
static int memory_exists(void __iomem *addr)
|
|
{
|
|
int tries = 0;
|
|
|
|
for (; tries < 3 ; tries++) {
|
|
writew(TEST_PATTERN, addr + 0x10);
|
|
|
|
if (readw(addr + 0x10) == TEST_PATTERN)
|
|
if (readw(addr + 0x10) == TEST_PATTERN)
|
|
return 1;
|
|
|
|
delay_cycx(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Load reset code. */
|
|
static void reset_load(void __iomem *addr, u8 *buffer, u32 cnt)
|
|
{
|
|
void __iomem *pt_code = addr + RESET_OFFSET;
|
|
u16 i; /*, j; */
|
|
|
|
for (i = 0 ; i < cnt ; i++) {
|
|
/* for (j = 0 ; j < 50 ; j++); Delay - FIXME busy waiting... */
|
|
writeb(*buffer++, pt_code++);
|
|
}
|
|
}
|
|
|
|
/* Load buffer using boot interface.
|
|
* o copy data from buffer to Cyclom-X memory
|
|
* o wait for reset code to copy it to right portion of memory */
|
|
static int buffer_load(void __iomem *addr, u8 *buffer, u32 cnt)
|
|
{
|
|
memcpy_toio(addr + DATA_OFFSET, buffer, cnt);
|
|
writew(GEN_BOOT_DAT, addr + CMD_OFFSET);
|
|
|
|
return wait_cyc(addr);
|
|
}
|
|
|
|
/* Set up entry point and kick start Cyclom-X CPU. */
|
|
static void cycx_start(void __iomem *addr)
|
|
{
|
|
/* put in 0x30 offset the jump instruction to the code entry point */
|
|
writeb(0xea, addr + 0x30);
|
|
writeb(0x00, addr + 0x31);
|
|
writeb(0xc4, addr + 0x32);
|
|
writeb(0x00, addr + 0x33);
|
|
writeb(0x00, addr + 0x34);
|
|
|
|
/* cmd to start executing code */
|
|
writew(GEN_START, addr + CMD_OFFSET);
|
|
}
|
|
|
|
/* Load and boot reset code. */
|
|
static void cycx_reset_boot(void __iomem *addr, u8 *code, u32 len)
|
|
{
|
|
void __iomem *pt_start = addr + START_OFFSET;
|
|
|
|
writeb(0xea, pt_start++); /* jmp to f000:3f00 */
|
|
writeb(0x00, pt_start++);
|
|
writeb(0xfc, pt_start++);
|
|
writeb(0x00, pt_start++);
|
|
writeb(0xf0, pt_start);
|
|
reset_load(addr, code, len);
|
|
|
|
/* 80186 was in hold, go */
|
|
writeb(0, addr + START_CPU);
|
|
delay_cycx(1);
|
|
}
|
|
|
|
/* Load data.bin file through boot (reset) interface. */
|
|
static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len)
|
|
{
|
|
void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
|
|
u32 i;
|
|
|
|
/* boot buffer lenght */
|
|
writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
|
|
writew(GEN_DEFPAR, pt_boot_cmd);
|
|
|
|
if (wait_cyc(addr) < 0)
|
|
return -1;
|
|
|
|
writew(0, pt_boot_cmd + sizeof(u16));
|
|
writew(0x4000, pt_boot_cmd + 2 * sizeof(u16));
|
|
writew(GEN_SET_SEG, pt_boot_cmd);
|
|
|
|
if (wait_cyc(addr) < 0)
|
|
return -1;
|
|
|
|
for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
|
|
if (buffer_load(addr, code + i,
|
|
min_t(u32, CFM_LOAD_BUFSZ, (len - i))) < 0) {
|
|
printk(KERN_ERR "%s: Error !!\n", modname);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Load code.bin file through boot (reset) interface. */
|
|
static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len)
|
|
{
|
|
void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
|
|
u32 i;
|
|
|
|
/* boot buffer lenght */
|
|
writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
|
|
writew(GEN_DEFPAR, pt_boot_cmd);
|
|
|
|
if (wait_cyc(addr) < 0)
|
|
return -1;
|
|
|
|
writew(0x0000, pt_boot_cmd + sizeof(u16));
|
|
writew(0xc400, pt_boot_cmd + 2 * sizeof(u16));
|
|
writew(GEN_SET_SEG, pt_boot_cmd);
|
|
|
|
if (wait_cyc(addr) < 0)
|
|
return -1;
|
|
|
|
for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
|
|
if (buffer_load(addr, code + i,
|
|
min_t(u32, CFM_LOAD_BUFSZ, (len - i)))) {
|
|
printk(KERN_ERR "%s: Error !!\n", modname);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Load adapter from the memory image of the CYCX firmware module.
|
|
* o verify firmware integrity and compatibility
|
|
* o start adapter up */
|
|
static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len)
|
|
{
|
|
int i, j;
|
|
struct cycx_fw_header *img_hdr;
|
|
u8 *reset_image,
|
|
*data_image,
|
|
*code_image;
|
|
void __iomem *pt_cycld = hw->dpmbase + 0x400;
|
|
u16 cksum;
|
|
|
|
/* Announce */
|
|
printk(KERN_INFO "%s: firmware signature=\"%s\"\n", modname,
|
|
cfm->signature);
|
|
|
|
/* Verify firmware signature */
|
|
if (strcmp(cfm->signature, CFM_SIGNATURE)) {
|
|
printk(KERN_ERR "%s:load_cyc2x: not Cyclom-2X firmware!\n",
|
|
modname);
|
|
return -EINVAL;
|
|
}
|
|
|
|
printk(KERN_INFO "%s: firmware version=%u\n", modname, cfm->version);
|
|
|
|
/* Verify firmware module format version */
|
|
if (cfm->version != CFM_VERSION) {
|
|
printk(KERN_ERR "%s:%s: firmware format %u rejected! "
|
|
"Expecting %u.\n",
|
|
modname, __FUNCTION__, cfm->version, CFM_VERSION);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Verify firmware module length and checksum */
|
|
cksum = checksum((u8*)&cfm->info, sizeof(struct cycx_fw_info) +
|
|
cfm->info.codesize);
|
|
/*
|
|
FIXME cfm->info.codesize is off by 2
|
|
if (((len - sizeof(struct cycx_firmware) - 1) != cfm->info.codesize) ||
|
|
*/
|
|
if (cksum != cfm->checksum) {
|
|
printk(KERN_ERR "%s:%s: firmware corrupted!\n",
|
|
modname, __FUNCTION__);
|
|
printk(KERN_ERR " cdsize = 0x%x (expected 0x%lx)\n",
|
|
len - (int)sizeof(struct cycx_firmware) - 1,
|
|
cfm->info.codesize);
|
|
printk(KERN_ERR " chksum = 0x%x (expected 0x%x)\n",
|
|
cksum, cfm->checksum);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* If everything is ok, set reset, data and code pointers */
|
|
img_hdr = (struct cycx_fw_header *)&cfm->image;
|
|
#ifdef FIRMWARE_DEBUG
|
|
printk(KERN_INFO "%s:%s: image sizes\n", __FUNCTION__, modname);
|
|
printk(KERN_INFO " reset=%lu\n", img_hdr->reset_size);
|
|
printk(KERN_INFO " data=%lu\n", img_hdr->data_size);
|
|
printk(KERN_INFO " code=%lu\n", img_hdr->code_size);
|
|
#endif
|
|
reset_image = ((u8 *)img_hdr) + sizeof(struct cycx_fw_header);
|
|
data_image = reset_image + img_hdr->reset_size;
|
|
code_image = data_image + img_hdr->data_size;
|
|
|
|
/*---- Start load ----*/
|
|
/* Announce */
|
|
printk(KERN_INFO "%s: loading firmware %s (ID=%u)...\n", modname,
|
|
cfm->descr[0] ? cfm->descr : "unknown firmware",
|
|
cfm->info.codeid);
|
|
|
|
for (i = 0 ; i < 5 ; i++) {
|
|
/* Reset Cyclom hardware */
|
|
if (!reset_cyc2x(hw->dpmbase)) {
|
|
printk(KERN_ERR "%s: dpm problem or board not found\n",
|
|
modname);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Load reset.bin */
|
|
cycx_reset_boot(hw->dpmbase, reset_image, img_hdr->reset_size);
|
|
/* reset is waiting for boot */
|
|
writew(GEN_POWER_ON, pt_cycld);
|
|
delay_cycx(1);
|
|
|
|
for (j = 0 ; j < 3 ; j++)
|
|
if (!readw(pt_cycld))
|
|
goto reset_loaded;
|
|
else
|
|
delay_cycx(1);
|
|
}
|
|
|
|
printk(KERN_ERR "%s: reset not started.\n", modname);
|
|
return -EINVAL;
|
|
|
|
reset_loaded:
|
|
/* Load data.bin */
|
|
if (cycx_data_boot(hw->dpmbase, data_image, img_hdr->data_size)) {
|
|
printk(KERN_ERR "%s: cannot load data file.\n", modname);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Load code.bin */
|
|
if (cycx_code_boot(hw->dpmbase, code_image, img_hdr->code_size)) {
|
|
printk(KERN_ERR "%s: cannot load code file.\n", modname);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Prepare boot-time configuration data */
|
|
cycx_bootcfg(hw);
|
|
|
|
/* kick-off CPU */
|
|
cycx_start(hw->dpmbase);
|
|
|
|
/* Arthur Ganzert's tip: wait a while after the firmware loading...
|
|
seg abr 26 17:17:12 EST 1999 - acme */
|
|
delay_cycx(7);
|
|
printk(KERN_INFO "%s: firmware loaded!\n", modname);
|
|
|
|
/* enable interrupts */
|
|
cycx_inten(hw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Prepare boot-time firmware configuration data.
|
|
* o initialize configuration data area
|
|
From async.doc - V_3.4.0 - 07/18/1994
|
|
- As of now, only static buffers are available to the user.
|
|
So, the bit VD_RXDIRC must be set in 'valid'. That means that user
|
|
wants to use the static transmission and reception buffers. */
|
|
static void cycx_bootcfg(struct cycx_hw *hw)
|
|
{
|
|
/* use fixed buffers */
|
|
writeb(FIXED_BUFFERS, hw->dpmbase + CONF_OFFSET);
|
|
}
|
|
|
|
/* Detect Cyclom 2x adapter.
|
|
* Following tests are used to detect Cyclom 2x adapter:
|
|
* to be completed based on the tests done below
|
|
* Return 1 if detected o.k. or 0 if failed.
|
|
* Note: This test is destructive! Adapter will be left in shutdown
|
|
* state after the test. */
|
|
static int detect_cyc2x(void __iomem *addr)
|
|
{
|
|
reset_cyc2x(addr);
|
|
|
|
return memory_exists(addr);
|
|
}
|
|
|
|
/* Miscellaneous */
|
|
/* Get option's index into the options list.
|
|
* Return option's index (1 .. N) or zero if option is invalid. */
|
|
static int get_option_index(long *optlist, long optval)
|
|
{
|
|
int i = 1;
|
|
|
|
for (; i <= optlist[0]; ++i)
|
|
if (optlist[i] == optval)
|
|
return i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Reset adapter's CPU. */
|
|
static int reset_cyc2x(void __iomem *addr)
|
|
{
|
|
writeb(0, addr + RST_ENABLE);
|
|
delay_cycx(2);
|
|
writeb(0, addr + RST_DISABLE);
|
|
delay_cycx(2);
|
|
|
|
return memory_exists(addr);
|
|
}
|
|
|
|
/* Delay */
|
|
static void delay_cycx(int sec)
|
|
{
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
schedule_timeout(sec * HZ);
|
|
}
|
|
|
|
/* Calculate 16-bit CRC using CCITT polynomial. */
|
|
static u16 checksum(u8 *buf, u32 len)
|
|
{
|
|
u16 crc = 0;
|
|
u16 mask, flag;
|
|
|
|
for (; len; --len, ++buf)
|
|
for (mask = 0x80; mask; mask >>= 1) {
|
|
flag = (crc & 0x8000);
|
|
crc <<= 1;
|
|
crc |= ((*buf & mask) ? 1 : 0);
|
|
|
|
if (flag)
|
|
crc ^= 0x1021;
|
|
}
|
|
|
|
return crc;
|
|
}
|
|
|
|
module_init(cycx_drv_init);
|
|
module_exit(cycx_drv_cleanup);
|
|
|
|
/* End */
|