kernel-fxtec-pro1x/drivers/pci/pcie/portdrv_pci.c
Huang Ying c733b77475 PCI/PM: Do not suspend port if any subordinate device needs PME polling
Ulrich reported that his USB3 cardreader does not work reliably when
connected to the USB3 port.  It turns out that USB3 controller failed to
awaken when plugging in the USB3 cardreader.  Further experiments found
that the USB3 host controller can only be awakened via polling, not via PME
interrupt.  But if the PCIe port to which the USB3 host controller is
connected is suspended, we cannot poll the controller because its config
space is not accessible when the PCIe port is in a low power state.

To solve the issue, the PCIe port will not be suspended if any subordinate
device needs PME polling.

[bhelgaas: use bool consistently rather than mixing int/bool]
Reference: http://lkml.kernel.org/r/50841CCC.9030809@uli-eckhardt.de
Reported-by: Ulrich Eckhardt <usb@uli-eckhardt.de>
Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: stable@vger.kernel.org	# v3.6+
2012-12-26 10:39:23 -07:00

463 lines
11 KiB
C

/*
* File: portdrv_pci.c
* Purpose: PCI Express Port Bus Driver
*
* Copyright (C) 2004 Intel
* Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/init.h>
#include <linux/pcieport_if.h>
#include <linux/aer.h>
#include <linux/dmi.h>
#include <linux/pci-aspm.h>
#include "portdrv.h"
#include "aer/aerdrv.h"
/*
* Version Information
*/
#define DRIVER_VERSION "v1.0"
#define DRIVER_AUTHOR "tom.l.nguyen@intel.com"
#define DRIVER_DESC "PCIe Port Bus Driver"
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
/* If this switch is set, PCIe port native services should not be enabled. */
bool pcie_ports_disabled;
/*
* If this switch is set, ACPI _OSC will be used to determine whether or not to
* enable PCIe port native services.
*/
bool pcie_ports_auto = true;
static int __init pcie_port_setup(char *str)
{
if (!strncmp(str, "compat", 6)) {
pcie_ports_disabled = true;
} else if (!strncmp(str, "native", 6)) {
pcie_ports_disabled = false;
pcie_ports_auto = false;
} else if (!strncmp(str, "auto", 4)) {
pcie_ports_disabled = false;
pcie_ports_auto = true;
}
return 1;
}
__setup("pcie_ports=", pcie_port_setup);
/* global data */
/**
* pcie_clear_root_pme_status - Clear root port PME interrupt status.
* @dev: PCIe root port or event collector.
*/
void pcie_clear_root_pme_status(struct pci_dev *dev)
{
pcie_capability_set_dword(dev, PCI_EXP_RTSTA, PCI_EXP_RTSTA_PME);
}
static int pcie_portdrv_restore_config(struct pci_dev *dev)
{
int retval;
retval = pci_enable_device(dev);
if (retval)
return retval;
pci_set_master(dev);
return 0;
}
#ifdef CONFIG_PM
static int pcie_port_resume_noirq(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
/*
* Some BIOSes forget to clear Root PME Status bits after system wakeup
* which breaks ACPI-based runtime wakeup on PCI Express, so clear those
* bits now just in case (shouldn't hurt).
*/
if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
pcie_clear_root_pme_status(pdev);
return 0;
}
#ifdef CONFIG_PM_RUNTIME
struct d3cold_info {
bool no_d3cold;
unsigned int d3cold_delay;
};
static int pci_dev_d3cold_info(struct pci_dev *pdev, void *data)
{
struct d3cold_info *info = data;
info->d3cold_delay = max_t(unsigned int, pdev->d3cold_delay,
info->d3cold_delay);
if (pdev->no_d3cold)
info->no_d3cold = true;
return 0;
}
static int pcie_port_runtime_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct d3cold_info d3cold_info = {
.no_d3cold = false,
.d3cold_delay = PCI_PM_D3_WAIT,
};
/*
* If any subordinate device disable D3cold, we should not put
* the port into D3cold. The D3cold delay of port should be
* the max of that of all subordinate devices.
*/
pci_walk_bus(pdev->subordinate, pci_dev_d3cold_info, &d3cold_info);
pdev->no_d3cold = d3cold_info.no_d3cold;
pdev->d3cold_delay = d3cold_info.d3cold_delay;
return 0;
}
static int pcie_port_runtime_resume(struct device *dev)
{
return 0;
}
static int pci_dev_pme_poll(struct pci_dev *pdev, void *data)
{
bool *pme_poll = data;
if (pdev->pme_poll)
*pme_poll = true;
return 0;
}
static int pcie_port_runtime_idle(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
bool pme_poll = false;
/*
* If any subordinate device needs pme poll, we should keep
* the port in D0, because we need port in D0 to poll it.
*/
pci_walk_bus(pdev->subordinate, pci_dev_pme_poll, &pme_poll);
/* Delay for a short while to prevent too frequent suspend/resume */
if (!pme_poll)
pm_schedule_suspend(dev, 10);
return -EBUSY;
}
#else
#define pcie_port_runtime_suspend NULL
#define pcie_port_runtime_resume NULL
#define pcie_port_runtime_idle NULL
#endif
static const struct dev_pm_ops pcie_portdrv_pm_ops = {
.suspend = pcie_port_device_suspend,
.resume = pcie_port_device_resume,
.freeze = pcie_port_device_suspend,
.thaw = pcie_port_device_resume,
.poweroff = pcie_port_device_suspend,
.restore = pcie_port_device_resume,
.resume_noirq = pcie_port_resume_noirq,
.runtime_suspend = pcie_port_runtime_suspend,
.runtime_resume = pcie_port_runtime_resume,
.runtime_idle = pcie_port_runtime_idle,
};
#define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
#else /* !PM */
#define PCIE_PORTDRV_PM_OPS NULL
#endif /* !PM */
/*
* PCIe port runtime suspend is broken for some chipsets, so use a
* black list to disable runtime PM for these chipsets.
*/
static const struct pci_device_id port_runtime_pm_black_list[] = {
{ /* end: all zeroes */ }
};
/*
* pcie_portdrv_probe - Probe PCI-Express port devices
* @dev: PCI-Express port device being probed
*
* If detected invokes the pcie_port_device_register() method for
* this port device.
*
*/
static int pcie_portdrv_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
int status;
if (!pci_is_pcie(dev) ||
((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
(pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) &&
(pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)))
return -ENODEV;
if (!dev->irq && dev->pin) {
dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; "
"check vendor BIOS\n", dev->vendor, dev->device);
}
status = pcie_port_device_register(dev);
if (status)
return status;
pci_save_state(dev);
/*
* D3cold may not work properly on some PCIe port, so disable
* it by default.
*/
dev->d3cold_allowed = false;
if (!pci_match_id(port_runtime_pm_black_list, dev))
pm_runtime_put_noidle(&dev->dev);
return 0;
}
static void pcie_portdrv_remove(struct pci_dev *dev)
{
if (!pci_match_id(port_runtime_pm_black_list, dev))
pm_runtime_get_noresume(&dev->dev);
pcie_port_device_remove(dev);
pci_disable_device(dev);
}
static int error_detected_iter(struct device *device, void *data)
{
struct pcie_device *pcie_device;
struct pcie_port_service_driver *driver;
struct aer_broadcast_data *result_data;
pci_ers_result_t status;
result_data = (struct aer_broadcast_data *) data;
if (device->bus == &pcie_port_bus_type && device->driver) {
driver = to_service_driver(device->driver);
if (!driver ||
!driver->err_handler ||
!driver->err_handler->error_detected)
return 0;
pcie_device = to_pcie_device(device);
/* Forward error detected message to service drivers */
status = driver->err_handler->error_detected(
pcie_device->port,
result_data->state);
result_data->result =
merge_result(result_data->result, status);
}
return 0;
}
static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev,
enum pci_channel_state error)
{
struct aer_broadcast_data data = {error, PCI_ERS_RESULT_CAN_RECOVER};
int ret;
/* can not fail */
ret = device_for_each_child(&dev->dev, &data, error_detected_iter);
return data.result;
}
static int mmio_enabled_iter(struct device *device, void *data)
{
struct pcie_device *pcie_device;
struct pcie_port_service_driver *driver;
pci_ers_result_t status, *result;
result = (pci_ers_result_t *) data;
if (device->bus == &pcie_port_bus_type && device->driver) {
driver = to_service_driver(device->driver);
if (driver &&
driver->err_handler &&
driver->err_handler->mmio_enabled) {
pcie_device = to_pcie_device(device);
/* Forward error message to service drivers */
status = driver->err_handler->mmio_enabled(
pcie_device->port);
*result = merge_result(*result, status);
}
}
return 0;
}
static pci_ers_result_t pcie_portdrv_mmio_enabled(struct pci_dev *dev)
{
pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
int retval;
/* get true return value from &status */
retval = device_for_each_child(&dev->dev, &status, mmio_enabled_iter);
return status;
}
static int slot_reset_iter(struct device *device, void *data)
{
struct pcie_device *pcie_device;
struct pcie_port_service_driver *driver;
pci_ers_result_t status, *result;
result = (pci_ers_result_t *) data;
if (device->bus == &pcie_port_bus_type && device->driver) {
driver = to_service_driver(device->driver);
if (driver &&
driver->err_handler &&
driver->err_handler->slot_reset) {
pcie_device = to_pcie_device(device);
/* Forward error message to service drivers */
status = driver->err_handler->slot_reset(
pcie_device->port);
*result = merge_result(*result, status);
}
}
return 0;
}
static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
{
pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
int retval;
/* If fatal, restore cfg space for possible link reset at upstream */
if (dev->error_state == pci_channel_io_frozen) {
dev->state_saved = true;
pci_restore_state(dev);
pcie_portdrv_restore_config(dev);
pci_enable_pcie_error_reporting(dev);
}
/* get true return value from &status */
retval = device_for_each_child(&dev->dev, &status, slot_reset_iter);
return status;
}
static int resume_iter(struct device *device, void *data)
{
struct pcie_device *pcie_device;
struct pcie_port_service_driver *driver;
if (device->bus == &pcie_port_bus_type && device->driver) {
driver = to_service_driver(device->driver);
if (driver &&
driver->err_handler &&
driver->err_handler->resume) {
pcie_device = to_pcie_device(device);
/* Forward error message to service drivers */
driver->err_handler->resume(pcie_device->port);
}
}
return 0;
}
static void pcie_portdrv_err_resume(struct pci_dev *dev)
{
int retval;
/* nothing to do with error value, if it ever happens */
retval = device_for_each_child(&dev->dev, NULL, resume_iter);
}
/*
* LINUX Device Driver Model
*/
static const struct pci_device_id port_pci_ids[] = { {
/* handle any PCI-Express port */
PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_PCI << 8) | 0x00), ~0),
}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, port_pci_ids);
static const struct pci_error_handlers pcie_portdrv_err_handler = {
.error_detected = pcie_portdrv_error_detected,
.mmio_enabled = pcie_portdrv_mmio_enabled,
.slot_reset = pcie_portdrv_slot_reset,
.resume = pcie_portdrv_err_resume,
};
static struct pci_driver pcie_portdriver = {
.name = "pcieport",
.id_table = &port_pci_ids[0],
.probe = pcie_portdrv_probe,
.remove = pcie_portdrv_remove,
.err_handler = &pcie_portdrv_err_handler,
.driver.pm = PCIE_PORTDRV_PM_OPS,
};
static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
{
pr_notice("%s detected: will not use MSI for PCIe PME signaling\n",
d->ident);
pcie_pme_disable_msi();
return 0;
}
static struct dmi_system_id __initdata pcie_portdrv_dmi_table[] = {
/*
* Boxes that should not use MSI for PCIe PME signaling.
*/
{
.callback = dmi_pcie_pme_disable_msi,
.ident = "MSI Wind U-100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR,
"MICRO-STAR INTERNATIONAL CO., LTD"),
DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
},
},
{}
};
static int __init pcie_portdrv_init(void)
{
int retval;
if (pcie_ports_disabled)
return pci_register_driver(&pcie_portdriver);
dmi_check_system(pcie_portdrv_dmi_table);
retval = pcie_port_bus_register();
if (retval) {
printk(KERN_WARNING "PCIE: bus_register error: %d\n", retval);
goto out;
}
retval = pci_register_driver(&pcie_portdriver);
if (retval)
pcie_port_bus_unregister();
out:
return retval;
}
module_init(pcie_portdrv_init);