2fbdc9bd42
If the sh_mobile_csi2 driver didn't attach to a client, normally, because the respective device connects to the SoC over the parallel CEU interface and doesn't use the CSI-2 controller, it also shouldn't call pm_runtime_put() on attempted disconnect. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
408 lines
10 KiB
C
408 lines
10 KiB
C
/*
|
|
* Driver for the SH-Mobile MIPI CSI-2 unit
|
|
*
|
|
* Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/videodev2.h>
|
|
|
|
#include <media/sh_mobile_ceu.h>
|
|
#include <media/sh_mobile_csi2.h>
|
|
#include <media/soc_camera.h>
|
|
#include <media/soc_mediabus.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/v4l2-dev.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-mediabus.h>
|
|
#include <media/v4l2-subdev.h>
|
|
|
|
#define SH_CSI2_TREF 0x00
|
|
#define SH_CSI2_SRST 0x04
|
|
#define SH_CSI2_PHYCNT 0x08
|
|
#define SH_CSI2_CHKSUM 0x0C
|
|
#define SH_CSI2_VCDT 0x10
|
|
|
|
struct sh_csi2 {
|
|
struct v4l2_subdev subdev;
|
|
struct list_head list;
|
|
unsigned int irq;
|
|
unsigned long mipi_flags;
|
|
void __iomem *base;
|
|
struct platform_device *pdev;
|
|
struct sh_csi2_client_config *client;
|
|
};
|
|
|
|
static int sh_csi2_try_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
|
|
struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
|
|
|
|
if (mf->width > 8188)
|
|
mf->width = 8188;
|
|
else if (mf->width & 1)
|
|
mf->width &= ~1;
|
|
|
|
switch (pdata->type) {
|
|
case SH_CSI2C:
|
|
switch (mf->code) {
|
|
case V4L2_MBUS_FMT_UYVY8_2X8: /* YUV422 */
|
|
case V4L2_MBUS_FMT_YUYV8_1_5X8: /* YUV420 */
|
|
case V4L2_MBUS_FMT_Y8_1X8: /* RAW8 */
|
|
case V4L2_MBUS_FMT_SBGGR8_1X8:
|
|
case V4L2_MBUS_FMT_SGRBG8_1X8:
|
|
break;
|
|
default:
|
|
/* All MIPI CSI-2 devices must support one of primary formats */
|
|
mf->code = V4L2_MBUS_FMT_YUYV8_2X8;
|
|
}
|
|
break;
|
|
case SH_CSI2I:
|
|
switch (mf->code) {
|
|
case V4L2_MBUS_FMT_Y8_1X8: /* RAW8 */
|
|
case V4L2_MBUS_FMT_SBGGR8_1X8:
|
|
case V4L2_MBUS_FMT_SGRBG8_1X8:
|
|
case V4L2_MBUS_FMT_SBGGR10_1X10: /* RAW10 */
|
|
case V4L2_MBUS_FMT_SBGGR12_1X12: /* RAW12 */
|
|
break;
|
|
default:
|
|
/* All MIPI CSI-2 devices must support one of primary formats */
|
|
mf->code = V4L2_MBUS_FMT_SBGGR8_1X8;
|
|
}
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* We have done our best in try_fmt to try and tell the sensor, which formats
|
|
* we support. If now the configuration is unsuitable for us we can only
|
|
* error out.
|
|
*/
|
|
static int sh_csi2_s_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
|
|
u32 tmp = (priv->client->channel & 3) << 8;
|
|
|
|
dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code);
|
|
if (mf->width > 8188 || mf->width & 1)
|
|
return -EINVAL;
|
|
|
|
switch (mf->code) {
|
|
case V4L2_MBUS_FMT_UYVY8_2X8:
|
|
tmp |= 0x1e; /* YUV422 8 bit */
|
|
break;
|
|
case V4L2_MBUS_FMT_YUYV8_1_5X8:
|
|
tmp |= 0x18; /* YUV420 8 bit */
|
|
break;
|
|
case V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE:
|
|
tmp |= 0x21; /* RGB555 */
|
|
break;
|
|
case V4L2_MBUS_FMT_RGB565_2X8_BE:
|
|
tmp |= 0x22; /* RGB565 */
|
|
break;
|
|
case V4L2_MBUS_FMT_Y8_1X8:
|
|
case V4L2_MBUS_FMT_SBGGR8_1X8:
|
|
case V4L2_MBUS_FMT_SGRBG8_1X8:
|
|
tmp |= 0x2a; /* RAW8 */
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
iowrite32(tmp, priv->base + SH_CSI2_VCDT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_csi2_g_mbus_config(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_config *cfg)
|
|
{
|
|
cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING |
|
|
V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
|
|
V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH;
|
|
cfg->type = V4L2_MBUS_PARALLEL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_csi2_s_mbus_config(struct v4l2_subdev *sd,
|
|
const struct v4l2_mbus_config *cfg)
|
|
{
|
|
struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
|
|
struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id;
|
|
struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd);
|
|
struct v4l2_mbus_config client_cfg = {.type = V4L2_MBUS_CSI2,
|
|
.flags = priv->mipi_flags};
|
|
|
|
return v4l2_subdev_call(client_sd, video, s_mbus_config, &client_cfg);
|
|
}
|
|
|
|
static struct v4l2_subdev_video_ops sh_csi2_subdev_video_ops = {
|
|
.s_mbus_fmt = sh_csi2_s_fmt,
|
|
.try_mbus_fmt = sh_csi2_try_fmt,
|
|
.g_mbus_config = sh_csi2_g_mbus_config,
|
|
.s_mbus_config = sh_csi2_s_mbus_config,
|
|
};
|
|
|
|
static void sh_csi2_hwinit(struct sh_csi2 *priv)
|
|
{
|
|
struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
|
|
__u32 tmp = 0x10; /* Enable MIPI CSI clock lane */
|
|
|
|
/* Reflect registers immediately */
|
|
iowrite32(0x00000001, priv->base + SH_CSI2_TREF);
|
|
/* reset CSI2 harware */
|
|
iowrite32(0x00000001, priv->base + SH_CSI2_SRST);
|
|
udelay(5);
|
|
iowrite32(0x00000000, priv->base + SH_CSI2_SRST);
|
|
|
|
switch (pdata->type) {
|
|
case SH_CSI2C:
|
|
if (priv->client->lanes == 1)
|
|
tmp |= 1;
|
|
else
|
|
/* Default - both lanes */
|
|
tmp |= 3;
|
|
break;
|
|
case SH_CSI2I:
|
|
if (!priv->client->lanes || priv->client->lanes > 4)
|
|
/* Default - all 4 lanes */
|
|
tmp |= 0xf;
|
|
else
|
|
tmp |= (1 << priv->client->lanes) - 1;
|
|
}
|
|
|
|
if (priv->client->phy == SH_CSI2_PHY_MAIN)
|
|
tmp |= 0x8000;
|
|
|
|
iowrite32(tmp, priv->base + SH_CSI2_PHYCNT);
|
|
|
|
tmp = 0;
|
|
if (pdata->flags & SH_CSI2_ECC)
|
|
tmp |= 2;
|
|
if (pdata->flags & SH_CSI2_CRC)
|
|
tmp |= 1;
|
|
iowrite32(tmp, priv->base + SH_CSI2_CHKSUM);
|
|
}
|
|
|
|
static int sh_csi2_client_connect(struct sh_csi2 *priv)
|
|
{
|
|
struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
|
|
struct soc_camera_device *icd = (struct soc_camera_device *)priv->subdev.grp_id;
|
|
struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd);
|
|
struct device *dev = v4l2_get_subdevdata(&priv->subdev);
|
|
struct v4l2_mbus_config cfg;
|
|
unsigned long common_flags, csi2_flags;
|
|
int i, ret;
|
|
|
|
if (priv->client)
|
|
return -EBUSY;
|
|
|
|
for (i = 0; i < pdata->num_clients; i++)
|
|
if (&pdata->clients[i].pdev->dev == icd->pdev)
|
|
break;
|
|
|
|
dev_dbg(dev, "%s(%p): found #%d\n", __func__, dev, i);
|
|
|
|
if (i == pdata->num_clients)
|
|
return -ENODEV;
|
|
|
|
/* Check if we can support this camera */
|
|
csi2_flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK | V4L2_MBUS_CSI2_1_LANE;
|
|
|
|
switch (pdata->type) {
|
|
case SH_CSI2C:
|
|
if (pdata->clients[i].lanes != 1)
|
|
csi2_flags |= V4L2_MBUS_CSI2_2_LANE;
|
|
break;
|
|
case SH_CSI2I:
|
|
switch (pdata->clients[i].lanes) {
|
|
default:
|
|
csi2_flags |= V4L2_MBUS_CSI2_4_LANE;
|
|
case 3:
|
|
csi2_flags |= V4L2_MBUS_CSI2_3_LANE;
|
|
case 2:
|
|
csi2_flags |= V4L2_MBUS_CSI2_2_LANE;
|
|
}
|
|
}
|
|
|
|
cfg.type = V4L2_MBUS_CSI2;
|
|
ret = v4l2_subdev_call(client_sd, video, g_mbus_config, &cfg);
|
|
if (ret == -ENOIOCTLCMD)
|
|
common_flags = csi2_flags;
|
|
else if (!ret)
|
|
common_flags = soc_mbus_config_compatible(&cfg,
|
|
csi2_flags);
|
|
else
|
|
common_flags = 0;
|
|
|
|
if (!common_flags)
|
|
return -EINVAL;
|
|
|
|
/* All good: camera MIPI configuration supported */
|
|
priv->mipi_flags = common_flags;
|
|
priv->client = pdata->clients + i;
|
|
|
|
pm_runtime_get_sync(dev);
|
|
|
|
sh_csi2_hwinit(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sh_csi2_client_disconnect(struct sh_csi2 *priv)
|
|
{
|
|
if (!priv->client)
|
|
return;
|
|
|
|
priv->client = NULL;
|
|
|
|
pm_runtime_put(v4l2_get_subdevdata(&priv->subdev));
|
|
}
|
|
|
|
static int sh_csi2_s_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
|
|
|
|
if (on)
|
|
return sh_csi2_client_connect(priv);
|
|
|
|
sh_csi2_client_disconnect(priv);
|
|
return 0;
|
|
}
|
|
|
|
static struct v4l2_subdev_core_ops sh_csi2_subdev_core_ops = {
|
|
.s_power = sh_csi2_s_power,
|
|
};
|
|
|
|
static struct v4l2_subdev_ops sh_csi2_subdev_ops = {
|
|
.core = &sh_csi2_subdev_core_ops,
|
|
.video = &sh_csi2_subdev_video_ops,
|
|
};
|
|
|
|
static __devinit int sh_csi2_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
unsigned int irq;
|
|
int ret;
|
|
struct sh_csi2 *priv;
|
|
/* Platform data specify the PHY, lanes, ECC, CRC */
|
|
struct sh_csi2_pdata *pdata = pdev->dev.platform_data;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
/* Interrupt unused so far */
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
if (!res || (int)irq <= 0 || !pdata) {
|
|
dev_err(&pdev->dev, "Not enough CSI2 platform resources.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* TODO: Add support for CSI2I. Careful: different register layout! */
|
|
if (pdata->type != SH_CSI2C) {
|
|
dev_err(&pdev->dev, "Only CSI2C supported ATM.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv = kzalloc(sizeof(struct sh_csi2), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->irq = irq;
|
|
|
|
if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
|
|
dev_err(&pdev->dev, "CSI2 register region already claimed\n");
|
|
ret = -EBUSY;
|
|
goto ereqreg;
|
|
}
|
|
|
|
priv->base = ioremap(res->start, resource_size(res));
|
|
if (!priv->base) {
|
|
ret = -ENXIO;
|
|
dev_err(&pdev->dev, "Unable to ioremap CSI2 registers.\n");
|
|
goto eremap;
|
|
}
|
|
|
|
priv->pdev = pdev;
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
v4l2_subdev_init(&priv->subdev, &sh_csi2_subdev_ops);
|
|
v4l2_set_subdevdata(&priv->subdev, &pdev->dev);
|
|
|
|
snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s.mipi-csi",
|
|
dev_name(pdata->v4l2_dev->dev));
|
|
ret = v4l2_device_register_subdev(pdata->v4l2_dev, &priv->subdev);
|
|
dev_dbg(&pdev->dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret);
|
|
if (ret < 0)
|
|
goto esdreg;
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
dev_dbg(&pdev->dev, "CSI2 probed.\n");
|
|
|
|
return 0;
|
|
|
|
esdreg:
|
|
iounmap(priv->base);
|
|
eremap:
|
|
release_mem_region(res->start, resource_size(res));
|
|
ereqreg:
|
|
kfree(priv);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static __devexit int sh_csi2_remove(struct platform_device *pdev)
|
|
{
|
|
struct sh_csi2 *priv = platform_get_drvdata(pdev);
|
|
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
v4l2_device_unregister_subdev(&priv->subdev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
iounmap(priv->base);
|
|
release_mem_region(res->start, resource_size(res));
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver __refdata sh_csi2_pdrv = {
|
|
.remove = __devexit_p(sh_csi2_remove),
|
|
.probe = sh_csi2_probe,
|
|
.driver = {
|
|
.name = "sh-mobile-csi2",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init sh_csi2_init(void)
|
|
{
|
|
return platform_driver_register(&sh_csi2_pdrv);
|
|
}
|
|
|
|
static void __exit sh_csi2_exit(void)
|
|
{
|
|
platform_driver_unregister(&sh_csi2_pdrv);
|
|
}
|
|
|
|
module_init(sh_csi2_init);
|
|
module_exit(sh_csi2_exit);
|
|
|
|
MODULE_DESCRIPTION("SH-Mobile MIPI CSI-2 driver");
|
|
MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:sh-mobile-csi2");
|