2065e310cc
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
1349 lines
40 KiB
C
1349 lines
40 KiB
C
/*
|
|
|
|
Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
|
|
|
|
Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
|
|
|
|
This program is free software; you may redistribute and/or modify it under
|
|
the terms of the GNU General Public License Version 2 as published by the
|
|
Free Software Foundation.
|
|
|
|
This program is distributed in the hope that it will be useful, but
|
|
WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
|
|
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
for complete details.
|
|
|
|
The author respectfully requests that any modifications to this software be
|
|
sent directly to him for evaluation and testing.
|
|
|
|
Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose
|
|
advice has been invaluable, to David Gentzel, for writing the original Linux
|
|
BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site.
|
|
|
|
Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB
|
|
Manager available as freely redistributable source code.
|
|
|
|
*/
|
|
|
|
#ifndef _BUSLOGIC_H
|
|
#define _BUSLOGIC_H
|
|
|
|
|
|
#ifndef PACKED
|
|
#define PACKED __attribute__((packed))
|
|
#endif
|
|
|
|
/*
|
|
FlashPoint support is only available for the Intel x86 Architecture with
|
|
CONFIG_PCI set.
|
|
*/
|
|
|
|
#ifndef __i386__
|
|
#undef CONFIG_SCSI_OMIT_FLASHPOINT
|
|
#define CONFIG_SCSI_OMIT_FLASHPOINT
|
|
#endif
|
|
|
|
#ifndef CONFIG_PCI
|
|
#undef CONFIG_SCSI_OMIT_FLASHPOINT
|
|
#define CONFIG_SCSI_OMIT_FLASHPOINT
|
|
#define BusLogic_InitializeProbeInfoListISA BusLogic_InitializeProbeInfoList
|
|
#endif
|
|
|
|
|
|
/*
|
|
Define the maximum number of BusLogic Host Adapters supported by this driver.
|
|
*/
|
|
|
|
#define BusLogic_MaxHostAdapters 16
|
|
|
|
|
|
/*
|
|
Define the maximum number of Target Devices supported by this driver.
|
|
*/
|
|
|
|
#define BusLogic_MaxTargetDevices 16
|
|
|
|
|
|
/*
|
|
Define the maximum number of Scatter/Gather Segments used by this driver.
|
|
For optimal performance, it is important that this limit be at least as
|
|
large as the largest single request generated by the I/O Subsystem.
|
|
*/
|
|
|
|
#define BusLogic_ScatterGatherLimit 128
|
|
|
|
|
|
/*
|
|
Define the maximum, maximum automatic, minimum automatic, and default Queue
|
|
Depth to allow for Target Devices depending on whether or not they support
|
|
Tagged Queuing and whether or not ISA Bounce Buffers are required.
|
|
*/
|
|
|
|
#define BusLogic_MaxTaggedQueueDepth 64
|
|
#define BusLogic_MaxAutomaticTaggedQueueDepth 28
|
|
#define BusLogic_MinAutomaticTaggedQueueDepth 7
|
|
#define BusLogic_TaggedQueueDepthBB 3
|
|
#define BusLogic_UntaggedQueueDepth 3
|
|
#define BusLogic_UntaggedQueueDepthBB 2
|
|
|
|
|
|
/*
|
|
Define the default amount of time in seconds to wait between a Host Adapter
|
|
Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI commands.
|
|
Some SCSI devices get confused if they receive SCSI commands too soon after
|
|
a SCSI Bus Reset.
|
|
*/
|
|
|
|
#define BusLogic_DefaultBusSettleTime 2
|
|
|
|
|
|
/*
|
|
Define the maximum number of Mailboxes that should be used for MultiMaster
|
|
Host Adapters. This number is chosen to be larger than the maximum Host
|
|
Adapter Queue Depth and small enough so that the Host Adapter structure
|
|
does not cross an allocation block size boundary.
|
|
*/
|
|
|
|
#define BusLogic_MaxMailboxes 211
|
|
|
|
|
|
/*
|
|
Define the number of CCBs that should be allocated as a group to optimize
|
|
Kernel memory allocation.
|
|
*/
|
|
|
|
#define BusLogic_CCB_AllocationGroupSize 7
|
|
|
|
|
|
/*
|
|
Define the Host Adapter Line and Message Buffer Sizes.
|
|
*/
|
|
|
|
#define BusLogic_LineBufferSize 100
|
|
#define BusLogic_MessageBufferSize 9700
|
|
|
|
|
|
/*
|
|
Define the Driver Message Levels.
|
|
*/
|
|
|
|
enum BusLogic_MessageLevel {
|
|
BusLogic_AnnounceLevel = 0,
|
|
BusLogic_InfoLevel = 1,
|
|
BusLogic_NoticeLevel = 2,
|
|
BusLogic_WarningLevel = 3,
|
|
BusLogic_ErrorLevel = 4
|
|
};
|
|
|
|
static char *BusLogic_MessageLevelMap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING, KERN_ERR };
|
|
|
|
|
|
/*
|
|
Define Driver Message macros.
|
|
*/
|
|
|
|
#define BusLogic_Announce(Format, Arguments...) \
|
|
BusLogic_Message(BusLogic_AnnounceLevel, Format, ##Arguments)
|
|
|
|
#define BusLogic_Info(Format, Arguments...) \
|
|
BusLogic_Message(BusLogic_InfoLevel, Format, ##Arguments)
|
|
|
|
#define BusLogic_Notice(Format, Arguments...) \
|
|
BusLogic_Message(BusLogic_NoticeLevel, Format, ##Arguments)
|
|
|
|
#define BusLogic_Warning(Format, Arguments...) \
|
|
BusLogic_Message(BusLogic_WarningLevel, Format, ##Arguments)
|
|
|
|
#define BusLogic_Error(Format, Arguments...) \
|
|
BusLogic_Message(BusLogic_ErrorLevel, Format, ##Arguments)
|
|
|
|
|
|
/*
|
|
Define the types of BusLogic Host Adapters that are supported and the number
|
|
of I/O Addresses required by each type.
|
|
*/
|
|
|
|
enum BusLogic_HostAdapterType {
|
|
BusLogic_MultiMaster = 1,
|
|
BusLogic_FlashPoint = 2
|
|
} PACKED;
|
|
|
|
#define BusLogic_MultiMasterAddressCount 4
|
|
#define BusLogic_FlashPointAddressCount 256
|
|
|
|
static int BusLogic_HostAdapterAddressCount[3] = { 0, BusLogic_MultiMasterAddressCount, BusLogic_FlashPointAddressCount };
|
|
|
|
|
|
/*
|
|
Define macros for testing the Host Adapter Type.
|
|
*/
|
|
|
|
#ifndef CONFIG_SCSI_OMIT_FLASHPOINT
|
|
|
|
#define BusLogic_MultiMasterHostAdapterP(HostAdapter) \
|
|
(HostAdapter->HostAdapterType == BusLogic_MultiMaster)
|
|
|
|
#define BusLogic_FlashPointHostAdapterP(HostAdapter) \
|
|
(HostAdapter->HostAdapterType == BusLogic_FlashPoint)
|
|
|
|
#else
|
|
|
|
#define BusLogic_MultiMasterHostAdapterP(HostAdapter) \
|
|
(true)
|
|
|
|
#define BusLogic_FlashPointHostAdapterP(HostAdapter) \
|
|
(false)
|
|
|
|
#endif
|
|
|
|
|
|
/*
|
|
Define the possible Host Adapter Bus Types.
|
|
*/
|
|
|
|
enum BusLogic_HostAdapterBusType {
|
|
BusLogic_Unknown_Bus = 0,
|
|
BusLogic_ISA_Bus = 1,
|
|
BusLogic_EISA_Bus = 2,
|
|
BusLogic_PCI_Bus = 3,
|
|
BusLogic_VESA_Bus = 4,
|
|
BusLogic_MCA_Bus = 5
|
|
} PACKED;
|
|
|
|
static char *BusLogic_HostAdapterBusNames[] = { "Unknown", "ISA", "EISA", "PCI", "VESA", "MCA" };
|
|
|
|
static enum BusLogic_HostAdapterBusType BusLogic_HostAdapterBusTypes[] = {
|
|
BusLogic_VESA_Bus, /* BT-4xx */
|
|
BusLogic_ISA_Bus, /* BT-5xx */
|
|
BusLogic_MCA_Bus, /* BT-6xx */
|
|
BusLogic_EISA_Bus, /* BT-7xx */
|
|
BusLogic_Unknown_Bus, /* BT-8xx */
|
|
BusLogic_PCI_Bus /* BT-9xx */
|
|
};
|
|
|
|
/*
|
|
Define the possible Host Adapter BIOS Disk Geometry Translations.
|
|
*/
|
|
|
|
enum BusLogic_BIOS_DiskGeometryTranslation {
|
|
BusLogic_BIOS_Disk_Not_Installed = 0,
|
|
BusLogic_BIOS_Disk_Installed_64x32 = 1,
|
|
BusLogic_BIOS_Disk_Installed_128x32 = 2,
|
|
BusLogic_BIOS_Disk_Installed_255x63 = 3
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define a 10^18 Statistics Byte Counter data type.
|
|
*/
|
|
|
|
struct BusLogic_ByteCounter {
|
|
unsigned int Units;
|
|
unsigned int Billions;
|
|
};
|
|
|
|
|
|
/*
|
|
Define the structure for I/O Address and Bus Probing Information.
|
|
*/
|
|
|
|
struct BusLogic_ProbeInfo {
|
|
enum BusLogic_HostAdapterType HostAdapterType;
|
|
enum BusLogic_HostAdapterBusType HostAdapterBusType;
|
|
unsigned long IO_Address;
|
|
unsigned long PCI_Address;
|
|
struct pci_dev *PCI_Device;
|
|
unsigned char Bus;
|
|
unsigned char Device;
|
|
unsigned char IRQ_Channel;
|
|
};
|
|
|
|
/*
|
|
Define the Probe Options.
|
|
*/
|
|
|
|
struct BusLogic_ProbeOptions {
|
|
bool NoProbe:1; /* Bit 0 */
|
|
bool NoProbeISA:1; /* Bit 1 */
|
|
bool NoProbePCI:1; /* Bit 2 */
|
|
bool NoSortPCI:1; /* Bit 3 */
|
|
bool MultiMasterFirst:1;/* Bit 4 */
|
|
bool FlashPointFirst:1; /* Bit 5 */
|
|
bool LimitedProbeISA:1; /* Bit 6 */
|
|
bool Probe330:1; /* Bit 7 */
|
|
bool Probe334:1; /* Bit 8 */
|
|
bool Probe230:1; /* Bit 9 */
|
|
bool Probe234:1; /* Bit 10 */
|
|
bool Probe130:1; /* Bit 11 */
|
|
bool Probe134:1; /* Bit 12 */
|
|
};
|
|
|
|
/*
|
|
Define the Global Options.
|
|
*/
|
|
|
|
struct BusLogic_GlobalOptions {
|
|
bool TraceProbe:1; /* Bit 0 */
|
|
bool TraceHardwareReset:1; /* Bit 1 */
|
|
bool TraceConfiguration:1; /* Bit 2 */
|
|
bool TraceErrors:1; /* Bit 3 */
|
|
};
|
|
|
|
/*
|
|
Define the Local Options.
|
|
*/
|
|
|
|
struct BusLogic_LocalOptions {
|
|
bool InhibitTargetInquiry:1; /* Bit 0 */
|
|
};
|
|
|
|
/*
|
|
Define the BusLogic SCSI Host Adapter I/O Register Offsets.
|
|
*/
|
|
|
|
#define BusLogic_ControlRegisterOffset 0 /* WO register */
|
|
#define BusLogic_StatusRegisterOffset 0 /* RO register */
|
|
#define BusLogic_CommandParameterRegisterOffset 1 /* WO register */
|
|
#define BusLogic_DataInRegisterOffset 1 /* RO register */
|
|
#define BusLogic_InterruptRegisterOffset 2 /* RO register */
|
|
#define BusLogic_GeometryRegisterOffset 3 /* RO register */
|
|
|
|
/*
|
|
Define the structure of the write-only Control Register.
|
|
*/
|
|
|
|
union BusLogic_ControlRegister {
|
|
unsigned char All;
|
|
struct {
|
|
unsigned char:4; /* Bits 0-3 */
|
|
bool SCSIBusReset:1; /* Bit 4 */
|
|
bool InterruptReset:1; /* Bit 5 */
|
|
bool SoftReset:1; /* Bit 6 */
|
|
bool HardReset:1; /* Bit 7 */
|
|
} cr;
|
|
};
|
|
|
|
/*
|
|
Define the structure of the read-only Status Register.
|
|
*/
|
|
|
|
union BusLogic_StatusRegister {
|
|
unsigned char All;
|
|
struct {
|
|
bool CommandInvalid:1; /* Bit 0 */
|
|
bool Reserved:1; /* Bit 1 */
|
|
bool DataInRegisterReady:1; /* Bit 2 */
|
|
bool CommandParameterRegisterBusy:1; /* Bit 3 */
|
|
bool HostAdapterReady:1; /* Bit 4 */
|
|
bool InitializationRequired:1; /* Bit 5 */
|
|
bool DiagnosticFailure:1; /* Bit 6 */
|
|
bool DiagnosticActive:1; /* Bit 7 */
|
|
} sr;
|
|
};
|
|
|
|
/*
|
|
Define the structure of the read-only Interrupt Register.
|
|
*/
|
|
|
|
union BusLogic_InterruptRegister {
|
|
unsigned char All;
|
|
struct {
|
|
bool IncomingMailboxLoaded:1; /* Bit 0 */
|
|
bool OutgoingMailboxAvailable:1;/* Bit 1 */
|
|
bool CommandComplete:1; /* Bit 2 */
|
|
bool ExternalBusReset:1; /* Bit 3 */
|
|
unsigned char Reserved:3; /* Bits 4-6 */
|
|
bool InterruptValid:1; /* Bit 7 */
|
|
} ir;
|
|
};
|
|
|
|
/*
|
|
Define the structure of the read-only Geometry Register.
|
|
*/
|
|
|
|
union BusLogic_GeometryRegister {
|
|
unsigned char All;
|
|
struct {
|
|
enum BusLogic_BIOS_DiskGeometryTranslation Drive0Geometry:2; /* Bits 0-1 */
|
|
enum BusLogic_BIOS_DiskGeometryTranslation Drive1Geometry:2; /* Bits 2-3 */
|
|
unsigned char:3; /* Bits 4-6 */
|
|
bool ExtendedTranslationEnabled:1; /* Bit 7 */
|
|
} gr;
|
|
};
|
|
|
|
/*
|
|
Define the BusLogic SCSI Host Adapter Command Register Operation Codes.
|
|
*/
|
|
|
|
enum BusLogic_OperationCode {
|
|
BusLogic_TestCommandCompleteInterrupt = 0x00,
|
|
BusLogic_InitializeMailbox = 0x01,
|
|
BusLogic_ExecuteMailboxCommand = 0x02,
|
|
BusLogic_ExecuteBIOSCommand = 0x03,
|
|
BusLogic_InquireBoardID = 0x04,
|
|
BusLogic_EnableOutgoingMailboxAvailableInt = 0x05,
|
|
BusLogic_SetSCSISelectionTimeout = 0x06,
|
|
BusLogic_SetPreemptTimeOnBus = 0x07,
|
|
BusLogic_SetTimeOffBus = 0x08,
|
|
BusLogic_SetBusTransferRate = 0x09,
|
|
BusLogic_InquireInstalledDevicesID0to7 = 0x0A,
|
|
BusLogic_InquireConfiguration = 0x0B,
|
|
BusLogic_EnableTargetMode = 0x0C,
|
|
BusLogic_InquireSetupInformation = 0x0D,
|
|
BusLogic_WriteAdapterLocalRAM = 0x1A,
|
|
BusLogic_ReadAdapterLocalRAM = 0x1B,
|
|
BusLogic_WriteBusMasterChipFIFO = 0x1C,
|
|
BusLogic_ReadBusMasterChipFIFO = 0x1D,
|
|
BusLogic_EchoCommandData = 0x1F,
|
|
BusLogic_HostAdapterDiagnostic = 0x20,
|
|
BusLogic_SetAdapterOptions = 0x21,
|
|
BusLogic_InquireInstalledDevicesID8to15 = 0x23,
|
|
BusLogic_InquireTargetDevices = 0x24,
|
|
BusLogic_DisableHostAdapterInterrupt = 0x25,
|
|
BusLogic_InitializeExtendedMailbox = 0x81,
|
|
BusLogic_ExecuteSCSICommand = 0x83,
|
|
BusLogic_InquireFirmwareVersion3rdDigit = 0x84,
|
|
BusLogic_InquireFirmwareVersionLetter = 0x85,
|
|
BusLogic_InquirePCIHostAdapterInformation = 0x86,
|
|
BusLogic_InquireHostAdapterModelNumber = 0x8B,
|
|
BusLogic_InquireSynchronousPeriod = 0x8C,
|
|
BusLogic_InquireExtendedSetupInformation = 0x8D,
|
|
BusLogic_EnableStrictRoundRobinMode = 0x8F,
|
|
BusLogic_StoreHostAdapterLocalRAM = 0x90,
|
|
BusLogic_FetchHostAdapterLocalRAM = 0x91,
|
|
BusLogic_StoreLocalDataInEEPROM = 0x92,
|
|
BusLogic_UploadAutoSCSICode = 0x94,
|
|
BusLogic_ModifyIOAddress = 0x95,
|
|
BusLogic_SetCCBFormat = 0x96,
|
|
BusLogic_WriteInquiryBuffer = 0x9A,
|
|
BusLogic_ReadInquiryBuffer = 0x9B,
|
|
BusLogic_FlashROMUploadDownload = 0xA7,
|
|
BusLogic_ReadSCAMData = 0xA8,
|
|
BusLogic_WriteSCAMData = 0xA9
|
|
};
|
|
|
|
/*
|
|
Define the Inquire Board ID reply structure.
|
|
*/
|
|
|
|
struct BusLogic_BoardID {
|
|
unsigned char BoardType; /* Byte 0 */
|
|
unsigned char CustomFeatures; /* Byte 1 */
|
|
unsigned char FirmwareVersion1stDigit; /* Byte 2 */
|
|
unsigned char FirmwareVersion2ndDigit; /* Byte 3 */
|
|
};
|
|
|
|
/*
|
|
Define the Inquire Configuration reply structure.
|
|
*/
|
|
|
|
struct BusLogic_Configuration {
|
|
unsigned char:5; /* Byte 0 Bits 0-4 */
|
|
bool DMA_Channel5:1; /* Byte 0 Bit 5 */
|
|
bool DMA_Channel6:1; /* Byte 0 Bit 6 */
|
|
bool DMA_Channel7:1; /* Byte 0 Bit 7 */
|
|
bool IRQ_Channel9:1; /* Byte 1 Bit 0 */
|
|
bool IRQ_Channel10:1; /* Byte 1 Bit 1 */
|
|
bool IRQ_Channel11:1; /* Byte 1 Bit 2 */
|
|
bool IRQ_Channel12:1; /* Byte 1 Bit 3 */
|
|
unsigned char:1; /* Byte 1 Bit 4 */
|
|
bool IRQ_Channel14:1; /* Byte 1 Bit 5 */
|
|
bool IRQ_Channel15:1; /* Byte 1 Bit 6 */
|
|
unsigned char:1; /* Byte 1 Bit 7 */
|
|
unsigned char HostAdapterID:4; /* Byte 2 Bits 0-3 */
|
|
unsigned char:4; /* Byte 2 Bits 4-7 */
|
|
};
|
|
|
|
/*
|
|
Define the Inquire Setup Information reply structure.
|
|
*/
|
|
|
|
struct BusLogic_SynchronousValue {
|
|
unsigned char Offset:4; /* Bits 0-3 */
|
|
unsigned char TransferPeriod:3; /* Bits 4-6 */
|
|
bool Synchronous:1; /* Bit 7 */
|
|
};
|
|
|
|
struct BusLogic_SetupInformation {
|
|
bool SynchronousInitiationEnabled:1; /* Byte 0 Bit 0 */
|
|
bool ParityCheckingEnabled:1; /* Byte 0 Bit 1 */
|
|
unsigned char:6; /* Byte 0 Bits 2-7 */
|
|
unsigned char BusTransferRate; /* Byte 1 */
|
|
unsigned char PreemptTimeOnBus; /* Byte 2 */
|
|
unsigned char TimeOffBus; /* Byte 3 */
|
|
unsigned char MailboxCount; /* Byte 4 */
|
|
unsigned char MailboxAddress[3]; /* Bytes 5-7 */
|
|
struct BusLogic_SynchronousValue SynchronousValuesID0to7[8]; /* Bytes 8-15 */
|
|
unsigned char DisconnectPermittedID0to7; /* Byte 16 */
|
|
unsigned char Signature; /* Byte 17 */
|
|
unsigned char CharacterD; /* Byte 18 */
|
|
unsigned char HostBusType; /* Byte 19 */
|
|
unsigned char WideTransfersPermittedID0to7; /* Byte 20 */
|
|
unsigned char WideTransfersActiveID0to7; /* Byte 21 */
|
|
struct BusLogic_SynchronousValue SynchronousValuesID8to15[8]; /* Bytes 22-29 */
|
|
unsigned char DisconnectPermittedID8to15; /* Byte 30 */
|
|
unsigned char:8; /* Byte 31 */
|
|
unsigned char WideTransfersPermittedID8to15; /* Byte 32 */
|
|
unsigned char WideTransfersActiveID8to15; /* Byte 33 */
|
|
};
|
|
|
|
/*
|
|
Define the Initialize Extended Mailbox request structure.
|
|
*/
|
|
|
|
struct BusLogic_ExtendedMailboxRequest {
|
|
unsigned char MailboxCount; /* Byte 0 */
|
|
u32 BaseMailboxAddress; /* Bytes 1-4 */
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define the Inquire PCI Host Adapter Information reply type. The ISA
|
|
Compatible I/O Port values are defined here and are also used with
|
|
the Modify I/O Address command.
|
|
*/
|
|
|
|
enum BusLogic_ISACompatibleIOPort {
|
|
BusLogic_IO_330 = 0,
|
|
BusLogic_IO_334 = 1,
|
|
BusLogic_IO_230 = 2,
|
|
BusLogic_IO_234 = 3,
|
|
BusLogic_IO_130 = 4,
|
|
BusLogic_IO_134 = 5,
|
|
BusLogic_IO_Disable = 6,
|
|
BusLogic_IO_Disable2 = 7
|
|
} PACKED;
|
|
|
|
struct BusLogic_PCIHostAdapterInformation {
|
|
enum BusLogic_ISACompatibleIOPort ISACompatibleIOPort; /* Byte 0 */
|
|
unsigned char PCIAssignedIRQChannel; /* Byte 1 */
|
|
bool LowByteTerminated:1; /* Byte 2 Bit 0 */
|
|
bool HighByteTerminated:1; /* Byte 2 Bit 1 */
|
|
unsigned char:2; /* Byte 2 Bits 2-3 */
|
|
bool JP1:1; /* Byte 2 Bit 4 */
|
|
bool JP2:1; /* Byte 2 Bit 5 */
|
|
bool JP3:1; /* Byte 2 Bit 6 */
|
|
bool GenericInfoValid:1;/* Byte 2 Bit 7 */
|
|
unsigned char:8; /* Byte 3 */
|
|
};
|
|
|
|
/*
|
|
Define the Inquire Extended Setup Information reply structure.
|
|
*/
|
|
|
|
struct BusLogic_ExtendedSetupInformation {
|
|
unsigned char BusType; /* Byte 0 */
|
|
unsigned char BIOS_Address; /* Byte 1 */
|
|
unsigned short ScatterGatherLimit; /* Bytes 2-3 */
|
|
unsigned char MailboxCount; /* Byte 4 */
|
|
u32 BaseMailboxAddress; /* Bytes 5-8 */
|
|
struct {
|
|
unsigned char:2; /* Byte 9 Bits 0-1 */
|
|
bool FastOnEISA:1; /* Byte 9 Bit 2 */
|
|
unsigned char:3; /* Byte 9 Bits 3-5 */
|
|
bool LevelSensitiveInterrupt:1; /* Byte 9 Bit 6 */
|
|
unsigned char:1; /* Byte 9 Bit 7 */
|
|
} Misc;
|
|
unsigned char FirmwareRevision[3]; /* Bytes 10-12 */
|
|
bool HostWideSCSI:1; /* Byte 13 Bit 0 */
|
|
bool HostDifferentialSCSI:1; /* Byte 13 Bit 1 */
|
|
bool HostSupportsSCAM:1; /* Byte 13 Bit 2 */
|
|
bool HostUltraSCSI:1; /* Byte 13 Bit 3 */
|
|
bool HostSmartTermination:1; /* Byte 13 Bit 4 */
|
|
unsigned char:3; /* Byte 13 Bits 5-7 */
|
|
} PACKED;
|
|
|
|
/*
|
|
Define the Enable Strict Round Robin Mode request type.
|
|
*/
|
|
|
|
enum BusLogic_RoundRobinModeRequest {
|
|
BusLogic_AggressiveRoundRobinMode = 0,
|
|
BusLogic_StrictRoundRobinMode = 1
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define the Fetch Host Adapter Local RAM request type.
|
|
*/
|
|
|
|
#define BusLogic_BIOS_BaseOffset 0
|
|
#define BusLogic_AutoSCSI_BaseOffset 64
|
|
|
|
struct BusLogic_FetchHostAdapterLocalRAMRequest {
|
|
unsigned char ByteOffset; /* Byte 0 */
|
|
unsigned char ByteCount; /* Byte 1 */
|
|
};
|
|
|
|
/*
|
|
Define the Host Adapter Local RAM AutoSCSI structure.
|
|
*/
|
|
|
|
struct BusLogic_AutoSCSIData {
|
|
unsigned char InternalFactorySignature[2]; /* Bytes 0-1 */
|
|
unsigned char InformationByteCount; /* Byte 2 */
|
|
unsigned char HostAdapterType[6]; /* Bytes 3-8 */
|
|
unsigned char:8; /* Byte 9 */
|
|
bool FloppyEnabled:1; /* Byte 10 Bit 0 */
|
|
bool FloppySecondary:1; /* Byte 10 Bit 1 */
|
|
bool LevelSensitiveInterrupt:1; /* Byte 10 Bit 2 */
|
|
unsigned char:2; /* Byte 10 Bits 3-4 */
|
|
unsigned char SystemRAMAreaForBIOS:3; /* Byte 10 Bits 5-7 */
|
|
unsigned char DMA_Channel:7; /* Byte 11 Bits 0-6 */
|
|
bool DMA_AutoConfiguration:1; /* Byte 11 Bit 7 */
|
|
unsigned char IRQ_Channel:7; /* Byte 12 Bits 0-6 */
|
|
bool IRQ_AutoConfiguration:1; /* Byte 12 Bit 7 */
|
|
unsigned char DMA_TransferRate; /* Byte 13 */
|
|
unsigned char SCSI_ID; /* Byte 14 */
|
|
bool LowByteTerminated:1; /* Byte 15 Bit 0 */
|
|
bool ParityCheckingEnabled:1; /* Byte 15 Bit 1 */
|
|
bool HighByteTerminated:1; /* Byte 15 Bit 2 */
|
|
bool NoisyCablingEnvironment:1; /* Byte 15 Bit 3 */
|
|
bool FastSynchronousNegotiation:1; /* Byte 15 Bit 4 */
|
|
bool BusResetEnabled:1; /* Byte 15 Bit 5 */
|
|
bool:1; /* Byte 15 Bit 6 */
|
|
bool ActiveNegationEnabled:1; /* Byte 15 Bit 7 */
|
|
unsigned char BusOnDelay; /* Byte 16 */
|
|
unsigned char BusOffDelay; /* Byte 17 */
|
|
bool HostAdapterBIOSEnabled:1; /* Byte 18 Bit 0 */
|
|
bool BIOSRedirectionOfINT19Enabled:1; /* Byte 18 Bit 1 */
|
|
bool ExtendedTranslationEnabled:1; /* Byte 18 Bit 2 */
|
|
bool MapRemovableAsFixedEnabled:1; /* Byte 18 Bit 3 */
|
|
bool:1; /* Byte 18 Bit 4 */
|
|
bool BIOSSupportsMoreThan2DrivesEnabled:1; /* Byte 18 Bit 5 */
|
|
bool BIOSInterruptModeEnabled:1; /* Byte 18 Bit 6 */
|
|
bool FlopticalSupportEnabled:1; /* Byte 19 Bit 7 */
|
|
unsigned short DeviceEnabled; /* Bytes 19-20 */
|
|
unsigned short WidePermitted; /* Bytes 21-22 */
|
|
unsigned short FastPermitted; /* Bytes 23-24 */
|
|
unsigned short SynchronousPermitted; /* Bytes 25-26 */
|
|
unsigned short DisconnectPermitted; /* Bytes 27-28 */
|
|
unsigned short SendStartUnitCommand; /* Bytes 29-30 */
|
|
unsigned short IgnoreInBIOSScan; /* Bytes 31-32 */
|
|
unsigned char PCIInterruptPin:2; /* Byte 33 Bits 0-1 */
|
|
unsigned char HostAdapterIOPortAddress:2; /* Byte 33 Bits 2-3 */
|
|
bool StrictRoundRobinModeEnabled:1; /* Byte 33 Bit 4 */
|
|
bool VESABusSpeedGreaterThan33MHz:1; /* Byte 33 Bit 5 */
|
|
bool VESABurstWriteEnabled:1; /* Byte 33 Bit 6 */
|
|
bool VESABurstReadEnabled:1; /* Byte 33 Bit 7 */
|
|
unsigned short UltraPermitted; /* Bytes 34-35 */
|
|
unsigned int:32; /* Bytes 36-39 */
|
|
unsigned char:8; /* Byte 40 */
|
|
unsigned char AutoSCSIMaximumLUN; /* Byte 41 */
|
|
bool:1; /* Byte 42 Bit 0 */
|
|
bool SCAM_Dominant:1; /* Byte 42 Bit 1 */
|
|
bool SCAM_Enabled:1; /* Byte 42 Bit 2 */
|
|
bool SCAM_Level2:1; /* Byte 42 Bit 3 */
|
|
unsigned char:4; /* Byte 42 Bits 4-7 */
|
|
bool INT13ExtensionEnabled:1; /* Byte 43 Bit 0 */
|
|
bool:1; /* Byte 43 Bit 1 */
|
|
bool CDROMBootEnabled:1; /* Byte 43 Bit 2 */
|
|
unsigned char:5; /* Byte 43 Bits 3-7 */
|
|
unsigned char BootTargetID:4; /* Byte 44 Bits 0-3 */
|
|
unsigned char BootChannel:4; /* Byte 44 Bits 4-7 */
|
|
unsigned char ForceBusDeviceScanningOrder:1; /* Byte 45 Bit 0 */
|
|
unsigned char:7; /* Byte 45 Bits 1-7 */
|
|
unsigned short NonTaggedToAlternateLUNPermitted; /* Bytes 46-47 */
|
|
unsigned short RenegotiateSyncAfterCheckCondition; /* Bytes 48-49 */
|
|
unsigned char Reserved[10]; /* Bytes 50-59 */
|
|
unsigned char ManufacturingDiagnostic[2]; /* Bytes 60-61 */
|
|
unsigned short Checksum; /* Bytes 62-63 */
|
|
} PACKED;
|
|
|
|
/*
|
|
Define the Host Adapter Local RAM Auto SCSI Byte 45 structure.
|
|
*/
|
|
|
|
struct BusLogic_AutoSCSIByte45 {
|
|
unsigned char ForceBusDeviceScanningOrder:1; /* Bit 0 */
|
|
unsigned char:7; /* Bits 1-7 */
|
|
};
|
|
|
|
/*
|
|
Define the Host Adapter Local RAM BIOS Drive Map Byte structure.
|
|
*/
|
|
|
|
#define BusLogic_BIOS_DriveMapOffset 17
|
|
|
|
struct BusLogic_BIOSDriveMapByte {
|
|
unsigned char TargetIDBit3:1; /* Bit 0 */
|
|
unsigned char:2; /* Bits 1-2 */
|
|
enum BusLogic_BIOS_DiskGeometryTranslation DiskGeometry:2; /* Bits 3-4 */
|
|
unsigned char TargetID:3; /* Bits 5-7 */
|
|
};
|
|
|
|
/*
|
|
Define the Set CCB Format request type. Extended LUN Format CCBs are
|
|
necessary to support more than 8 Logical Units per Target Device.
|
|
*/
|
|
|
|
enum BusLogic_SetCCBFormatRequest {
|
|
BusLogic_LegacyLUNFormatCCB = 0,
|
|
BusLogic_ExtendedLUNFormatCCB = 1
|
|
} PACKED;
|
|
|
|
/*
|
|
Define the Outgoing Mailbox Action Codes.
|
|
*/
|
|
|
|
enum BusLogic_ActionCode {
|
|
BusLogic_OutgoingMailboxFree = 0x00,
|
|
BusLogic_MailboxStartCommand = 0x01,
|
|
BusLogic_MailboxAbortCommand = 0x02
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define the Incoming Mailbox Completion Codes. The MultiMaster Firmware
|
|
only uses codes 0 - 4. The FlashPoint SCCB Manager has no mailboxes, so
|
|
completion codes are stored in the CCB; it only uses codes 1, 2, 4, and 5.
|
|
*/
|
|
|
|
enum BusLogic_CompletionCode {
|
|
BusLogic_IncomingMailboxFree = 0x00,
|
|
BusLogic_CommandCompletedWithoutError = 0x01,
|
|
BusLogic_CommandAbortedAtHostRequest = 0x02,
|
|
BusLogic_AbortedCommandNotFound = 0x03,
|
|
BusLogic_CommandCompletedWithError = 0x04,
|
|
BusLogic_InvalidCCB = 0x05
|
|
} PACKED;
|
|
|
|
/*
|
|
Define the Command Control Block (CCB) Opcodes.
|
|
*/
|
|
|
|
enum BusLogic_CCB_Opcode {
|
|
BusLogic_InitiatorCCB = 0x00,
|
|
BusLogic_TargetCCB = 0x01,
|
|
BusLogic_InitiatorCCB_ScatterGather = 0x02,
|
|
BusLogic_InitiatorCCB_ResidualDataLength = 0x03,
|
|
BusLogic_InitiatorCCB_ScatterGatherResidual = 0x04,
|
|
BusLogic_BusDeviceReset = 0x81
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define the CCB Data Direction Codes.
|
|
*/
|
|
|
|
enum BusLogic_DataDirection {
|
|
BusLogic_UncheckedDataTransfer = 0,
|
|
BusLogic_DataInLengthChecked = 1,
|
|
BusLogic_DataOutLengthChecked = 2,
|
|
BusLogic_NoDataTransfer = 3
|
|
};
|
|
|
|
|
|
/*
|
|
Define the Host Adapter Status Codes. The MultiMaster Firmware does not
|
|
return status code 0x0C; it uses 0x12 for both overruns and underruns.
|
|
*/
|
|
|
|
enum BusLogic_HostAdapterStatus {
|
|
BusLogic_CommandCompletedNormally = 0x00,
|
|
BusLogic_LinkedCommandCompleted = 0x0A,
|
|
BusLogic_LinkedCommandCompletedWithFlag = 0x0B,
|
|
BusLogic_DataUnderRun = 0x0C,
|
|
BusLogic_SCSISelectionTimeout = 0x11,
|
|
BusLogic_DataOverRun = 0x12,
|
|
BusLogic_UnexpectedBusFree = 0x13,
|
|
BusLogic_InvalidBusPhaseRequested = 0x14,
|
|
BusLogic_InvalidOutgoingMailboxActionCode = 0x15,
|
|
BusLogic_InvalidCommandOperationCode = 0x16,
|
|
BusLogic_LinkedCCBhasInvalidLUN = 0x17,
|
|
BusLogic_InvalidCommandParameter = 0x1A,
|
|
BusLogic_AutoRequestSenseFailed = 0x1B,
|
|
BusLogic_TaggedQueuingMessageRejected = 0x1C,
|
|
BusLogic_UnsupportedMessageReceived = 0x1D,
|
|
BusLogic_HostAdapterHardwareFailed = 0x20,
|
|
BusLogic_TargetFailedResponseToATN = 0x21,
|
|
BusLogic_HostAdapterAssertedRST = 0x22,
|
|
BusLogic_OtherDeviceAssertedRST = 0x23,
|
|
BusLogic_TargetDeviceReconnectedImproperly = 0x24,
|
|
BusLogic_HostAdapterAssertedBusDeviceReset = 0x25,
|
|
BusLogic_AbortQueueGenerated = 0x26,
|
|
BusLogic_HostAdapterSoftwareError = 0x27,
|
|
BusLogic_HostAdapterHardwareTimeoutError = 0x30,
|
|
BusLogic_SCSIParityErrorDetected = 0x34
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define the SCSI Target Device Status Codes.
|
|
*/
|
|
|
|
enum BusLogic_TargetDeviceStatus {
|
|
BusLogic_OperationGood = 0x00,
|
|
BusLogic_CheckCondition = 0x02,
|
|
BusLogic_DeviceBusy = 0x08
|
|
} PACKED;
|
|
|
|
/*
|
|
Define the Queue Tag Codes.
|
|
*/
|
|
|
|
enum BusLogic_QueueTag {
|
|
BusLogic_SimpleQueueTag = 0,
|
|
BusLogic_HeadOfQueueTag = 1,
|
|
BusLogic_OrderedQueueTag = 2,
|
|
BusLogic_ReservedQT = 3
|
|
};
|
|
|
|
/*
|
|
Define the SCSI Command Descriptor Block (CDB).
|
|
*/
|
|
|
|
#define BusLogic_CDB_MaxLength 12
|
|
|
|
typedef unsigned char SCSI_CDB_T[BusLogic_CDB_MaxLength];
|
|
|
|
|
|
/*
|
|
Define the Scatter/Gather Segment structure required by the MultiMaster
|
|
Firmware Interface and the FlashPoint SCCB Manager.
|
|
*/
|
|
|
|
struct BusLogic_ScatterGatherSegment {
|
|
u32 SegmentByteCount; /* Bytes 0-3 */
|
|
u32 SegmentDataPointer; /* Bytes 4-7 */
|
|
};
|
|
|
|
/*
|
|
Define the Driver CCB Status Codes.
|
|
*/
|
|
|
|
enum BusLogic_CCB_Status {
|
|
BusLogic_CCB_Free = 0,
|
|
BusLogic_CCB_Active = 1,
|
|
BusLogic_CCB_Completed = 2,
|
|
BusLogic_CCB_Reset = 3
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define the 32 Bit Mode Command Control Block (CCB) structure. The first 40
|
|
bytes are defined by and common to both the MultiMaster Firmware and the
|
|
FlashPoint SCCB Manager. The next 60 bytes are defined by the FlashPoint
|
|
SCCB Manager. The remaining components are defined by the Linux BusLogic
|
|
Driver. Extended LUN Format CCBs differ from Legacy LUN Format 32 Bit Mode
|
|
CCBs only in having the TagEnable and QueueTag fields moved from byte 17 to
|
|
byte 1, and the Logical Unit field in byte 17 expanded to 6 bits. In theory,
|
|
Extended LUN Format CCBs can support up to 64 Logical Units, but in practice
|
|
many devices will respond improperly to Logical Units between 32 and 63, and
|
|
the SCSI-2 specification defines Bit 5 as LUNTAR. Extended LUN Format CCBs
|
|
are used by recent versions of the MultiMaster Firmware, as well as by the
|
|
FlashPoint SCCB Manager; the FlashPoint SCCB Manager only supports 32 Logical
|
|
Units. Since 64 Logical Units are unlikely to be needed in practice, and
|
|
since they are problematic for the above reasons, and since limiting them to
|
|
5 bits simplifies the CCB structure definition, this driver only supports
|
|
32 Logical Units per Target Device.
|
|
*/
|
|
|
|
struct BusLogic_CCB {
|
|
/*
|
|
MultiMaster Firmware and FlashPoint SCCB Manager Common Portion.
|
|
*/
|
|
enum BusLogic_CCB_Opcode Opcode; /* Byte 0 */
|
|
unsigned char:3; /* Byte 1 Bits 0-2 */
|
|
enum BusLogic_DataDirection DataDirection:2; /* Byte 1 Bits 3-4 */
|
|
bool TagEnable:1; /* Byte 1 Bit 5 */
|
|
enum BusLogic_QueueTag QueueTag:2; /* Byte 1 Bits 6-7 */
|
|
unsigned char CDB_Length; /* Byte 2 */
|
|
unsigned char SenseDataLength; /* Byte 3 */
|
|
u32 DataLength; /* Bytes 4-7 */
|
|
u32 DataPointer; /* Bytes 8-11 */
|
|
unsigned char:8; /* Byte 12 */
|
|
unsigned char:8; /* Byte 13 */
|
|
enum BusLogic_HostAdapterStatus HostAdapterStatus; /* Byte 14 */
|
|
enum BusLogic_TargetDeviceStatus TargetDeviceStatus; /* Byte 15 */
|
|
unsigned char TargetID; /* Byte 16 */
|
|
unsigned char LogicalUnit:5; /* Byte 17 Bits 0-4 */
|
|
bool LegacyTagEnable:1; /* Byte 17 Bit 5 */
|
|
enum BusLogic_QueueTag LegacyQueueTag:2; /* Byte 17 Bits 6-7 */
|
|
SCSI_CDB_T CDB; /* Bytes 18-29 */
|
|
unsigned char:8; /* Byte 30 */
|
|
unsigned char:8; /* Byte 31 */
|
|
unsigned int:32; /* Bytes 32-35 */
|
|
u32 SenseDataPointer; /* Bytes 36-39 */
|
|
/*
|
|
FlashPoint SCCB Manager Defined Portion.
|
|
*/
|
|
void (*CallbackFunction) (struct BusLogic_CCB *); /* Bytes 40-43 */
|
|
u32 BaseAddress; /* Bytes 44-47 */
|
|
enum BusLogic_CompletionCode CompletionCode; /* Byte 48 */
|
|
#ifndef CONFIG_SCSI_OMIT_FLASHPOINT
|
|
unsigned char:8; /* Byte 49 */
|
|
unsigned short OS_Flags; /* Bytes 50-51 */
|
|
unsigned char Private[48]; /* Bytes 52-99 */
|
|
#endif
|
|
/*
|
|
BusLogic Linux Driver Defined Portion.
|
|
*/
|
|
dma_addr_t AllocationGroupHead;
|
|
unsigned int AllocationGroupSize;
|
|
u32 DMA_Handle;
|
|
enum BusLogic_CCB_Status Status;
|
|
unsigned long SerialNumber;
|
|
struct scsi_cmnd *Command;
|
|
struct BusLogic_HostAdapter *HostAdapter;
|
|
struct BusLogic_CCB *Next;
|
|
struct BusLogic_CCB *NextAll;
|
|
struct BusLogic_ScatterGatherSegment
|
|
ScatterGatherList[BusLogic_ScatterGatherLimit];
|
|
};
|
|
|
|
/*
|
|
Define the 32 Bit Mode Outgoing Mailbox structure.
|
|
*/
|
|
|
|
struct BusLogic_OutgoingMailbox {
|
|
u32 CCB; /* Bytes 0-3 */
|
|
unsigned int:24; /* Bytes 4-6 */
|
|
enum BusLogic_ActionCode ActionCode; /* Byte 7 */
|
|
};
|
|
|
|
/*
|
|
Define the 32 Bit Mode Incoming Mailbox structure.
|
|
*/
|
|
|
|
struct BusLogic_IncomingMailbox {
|
|
u32 CCB; /* Bytes 0-3 */
|
|
enum BusLogic_HostAdapterStatus HostAdapterStatus; /* Byte 4 */
|
|
enum BusLogic_TargetDeviceStatus TargetDeviceStatus; /* Byte 5 */
|
|
unsigned char:8; /* Byte 6 */
|
|
enum BusLogic_CompletionCode CompletionCode; /* Byte 7 */
|
|
};
|
|
|
|
|
|
/*
|
|
Define the BusLogic Driver Options structure.
|
|
*/
|
|
|
|
struct BusLogic_DriverOptions {
|
|
unsigned short TaggedQueuingPermitted;
|
|
unsigned short TaggedQueuingPermittedMask;
|
|
unsigned short BusSettleTime;
|
|
struct BusLogic_LocalOptions LocalOptions;
|
|
unsigned char CommonQueueDepth;
|
|
unsigned char QueueDepth[BusLogic_MaxTargetDevices];
|
|
};
|
|
|
|
/*
|
|
Define the Host Adapter Target Flags structure.
|
|
*/
|
|
|
|
struct BusLogic_TargetFlags {
|
|
bool TargetExists:1;
|
|
bool TaggedQueuingSupported:1;
|
|
bool WideTransfersSupported:1;
|
|
bool TaggedQueuingActive:1;
|
|
bool WideTransfersActive:1;
|
|
bool CommandSuccessfulFlag:1;
|
|
bool TargetInfoReported:1;
|
|
};
|
|
|
|
/*
|
|
Define the Host Adapter Target Statistics structure.
|
|
*/
|
|
|
|
#define BusLogic_SizeBuckets 10
|
|
|
|
typedef unsigned int BusLogic_CommandSizeBuckets_T[BusLogic_SizeBuckets];
|
|
|
|
struct BusLogic_TargetStatistics {
|
|
unsigned int CommandsAttempted;
|
|
unsigned int CommandsCompleted;
|
|
unsigned int ReadCommands;
|
|
unsigned int WriteCommands;
|
|
struct BusLogic_ByteCounter TotalBytesRead;
|
|
struct BusLogic_ByteCounter TotalBytesWritten;
|
|
BusLogic_CommandSizeBuckets_T ReadCommandSizeBuckets;
|
|
BusLogic_CommandSizeBuckets_T WriteCommandSizeBuckets;
|
|
unsigned short CommandAbortsRequested;
|
|
unsigned short CommandAbortsAttempted;
|
|
unsigned short CommandAbortsCompleted;
|
|
unsigned short BusDeviceResetsRequested;
|
|
unsigned short BusDeviceResetsAttempted;
|
|
unsigned short BusDeviceResetsCompleted;
|
|
unsigned short HostAdapterResetsRequested;
|
|
unsigned short HostAdapterResetsAttempted;
|
|
unsigned short HostAdapterResetsCompleted;
|
|
};
|
|
|
|
/*
|
|
Define the FlashPoint Card Handle data type.
|
|
*/
|
|
|
|
#define FlashPoint_BadCardHandle 0xFFFFFFFF
|
|
|
|
typedef unsigned int FlashPoint_CardHandle_T;
|
|
|
|
|
|
/*
|
|
Define the FlashPoint Information structure. This structure is defined
|
|
by the FlashPoint SCCB Manager.
|
|
*/
|
|
|
|
struct FlashPoint_Info {
|
|
u32 BaseAddress; /* Bytes 0-3 */
|
|
bool Present; /* Byte 4 */
|
|
unsigned char IRQ_Channel; /* Byte 5 */
|
|
unsigned char SCSI_ID; /* Byte 6 */
|
|
unsigned char SCSI_LUN; /* Byte 7 */
|
|
unsigned short FirmwareRevision; /* Bytes 8-9 */
|
|
unsigned short SynchronousPermitted; /* Bytes 10-11 */
|
|
unsigned short FastPermitted; /* Bytes 12-13 */
|
|
unsigned short UltraPermitted; /* Bytes 14-15 */
|
|
unsigned short DisconnectPermitted; /* Bytes 16-17 */
|
|
unsigned short WidePermitted; /* Bytes 18-19 */
|
|
bool ParityCheckingEnabled:1; /* Byte 20 Bit 0 */
|
|
bool HostWideSCSI:1; /* Byte 20 Bit 1 */
|
|
bool HostSoftReset:1; /* Byte 20 Bit 2 */
|
|
bool ExtendedTranslationEnabled:1; /* Byte 20 Bit 3 */
|
|
bool LowByteTerminated:1; /* Byte 20 Bit 4 */
|
|
bool HighByteTerminated:1; /* Byte 20 Bit 5 */
|
|
bool ReportDataUnderrun:1; /* Byte 20 Bit 6 */
|
|
bool SCAM_Enabled:1; /* Byte 20 Bit 7 */
|
|
bool SCAM_Level2:1; /* Byte 21 Bit 0 */
|
|
unsigned char:7; /* Byte 21 Bits 1-7 */
|
|
unsigned char Family; /* Byte 22 */
|
|
unsigned char BusType; /* Byte 23 */
|
|
unsigned char ModelNumber[3]; /* Bytes 24-26 */
|
|
unsigned char RelativeCardNumber; /* Byte 27 */
|
|
unsigned char Reserved[4]; /* Bytes 28-31 */
|
|
unsigned int OS_Reserved; /* Bytes 32-35 */
|
|
unsigned char TranslationInfo[4]; /* Bytes 36-39 */
|
|
unsigned int Reserved2[5]; /* Bytes 40-59 */
|
|
unsigned int SecondaryRange; /* Bytes 60-63 */
|
|
};
|
|
|
|
/*
|
|
Define the BusLogic Driver Host Adapter structure.
|
|
*/
|
|
|
|
struct BusLogic_HostAdapter {
|
|
struct Scsi_Host *SCSI_Host;
|
|
struct pci_dev *PCI_Device;
|
|
enum BusLogic_HostAdapterType HostAdapterType;
|
|
enum BusLogic_HostAdapterBusType HostAdapterBusType;
|
|
unsigned long IO_Address;
|
|
unsigned long PCI_Address;
|
|
unsigned short AddressCount;
|
|
unsigned char HostNumber;
|
|
unsigned char ModelName[9];
|
|
unsigned char FirmwareVersion[6];
|
|
unsigned char FullModelName[18];
|
|
unsigned char Bus;
|
|
unsigned char Device;
|
|
unsigned char IRQ_Channel;
|
|
unsigned char DMA_Channel;
|
|
unsigned char SCSI_ID;
|
|
bool IRQ_ChannelAcquired:1;
|
|
bool DMA_ChannelAcquired:1;
|
|
bool ExtendedTranslationEnabled:1;
|
|
bool ParityCheckingEnabled:1;
|
|
bool BusResetEnabled:1;
|
|
bool LevelSensitiveInterrupt:1;
|
|
bool HostWideSCSI:1;
|
|
bool HostDifferentialSCSI:1;
|
|
bool HostSupportsSCAM:1;
|
|
bool HostUltraSCSI:1;
|
|
bool ExtendedLUNSupport:1;
|
|
bool TerminationInfoValid:1;
|
|
bool LowByteTerminated:1;
|
|
bool HighByteTerminated:1;
|
|
bool BounceBuffersRequired:1;
|
|
bool StrictRoundRobinModeSupport:1;
|
|
bool SCAM_Enabled:1;
|
|
bool SCAM_Level2:1;
|
|
bool HostAdapterInitialized:1;
|
|
bool HostAdapterExternalReset:1;
|
|
bool HostAdapterInternalError:1;
|
|
bool ProcessCompletedCCBsActive;
|
|
volatile bool HostAdapterCommandCompleted;
|
|
unsigned short HostAdapterScatterGatherLimit;
|
|
unsigned short DriverScatterGatherLimit;
|
|
unsigned short MaxTargetDevices;
|
|
unsigned short MaxLogicalUnits;
|
|
unsigned short MailboxCount;
|
|
unsigned short InitialCCBs;
|
|
unsigned short IncrementalCCBs;
|
|
unsigned short AllocatedCCBs;
|
|
unsigned short DriverQueueDepth;
|
|
unsigned short HostAdapterQueueDepth;
|
|
unsigned short UntaggedQueueDepth;
|
|
unsigned short CommonQueueDepth;
|
|
unsigned short BusSettleTime;
|
|
unsigned short SynchronousPermitted;
|
|
unsigned short FastPermitted;
|
|
unsigned short UltraPermitted;
|
|
unsigned short WidePermitted;
|
|
unsigned short DisconnectPermitted;
|
|
unsigned short TaggedQueuingPermitted;
|
|
unsigned short ExternalHostAdapterResets;
|
|
unsigned short HostAdapterInternalErrors;
|
|
unsigned short TargetDeviceCount;
|
|
unsigned short MessageBufferLength;
|
|
u32 BIOS_Address;
|
|
struct BusLogic_DriverOptions *DriverOptions;
|
|
struct FlashPoint_Info FlashPointInfo;
|
|
FlashPoint_CardHandle_T CardHandle;
|
|
struct list_head host_list;
|
|
struct BusLogic_CCB *All_CCBs;
|
|
struct BusLogic_CCB *Free_CCBs;
|
|
struct BusLogic_CCB *FirstCompletedCCB;
|
|
struct BusLogic_CCB *LastCompletedCCB;
|
|
struct BusLogic_CCB *BusDeviceResetPendingCCB[BusLogic_MaxTargetDevices];
|
|
struct BusLogic_TargetFlags TargetFlags[BusLogic_MaxTargetDevices];
|
|
unsigned char QueueDepth[BusLogic_MaxTargetDevices];
|
|
unsigned char SynchronousPeriod[BusLogic_MaxTargetDevices];
|
|
unsigned char SynchronousOffset[BusLogic_MaxTargetDevices];
|
|
unsigned char ActiveCommands[BusLogic_MaxTargetDevices];
|
|
unsigned int CommandsSinceReset[BusLogic_MaxTargetDevices];
|
|
unsigned long LastSequencePoint[BusLogic_MaxTargetDevices];
|
|
unsigned long LastResetAttempted[BusLogic_MaxTargetDevices];
|
|
unsigned long LastResetCompleted[BusLogic_MaxTargetDevices];
|
|
struct BusLogic_OutgoingMailbox *FirstOutgoingMailbox;
|
|
struct BusLogic_OutgoingMailbox *LastOutgoingMailbox;
|
|
struct BusLogic_OutgoingMailbox *NextOutgoingMailbox;
|
|
struct BusLogic_IncomingMailbox *FirstIncomingMailbox;
|
|
struct BusLogic_IncomingMailbox *LastIncomingMailbox;
|
|
struct BusLogic_IncomingMailbox *NextIncomingMailbox;
|
|
struct BusLogic_TargetStatistics TargetStatistics[BusLogic_MaxTargetDevices];
|
|
unsigned char *MailboxSpace;
|
|
dma_addr_t MailboxSpaceHandle;
|
|
unsigned int MailboxSize;
|
|
unsigned long CCB_Offset;
|
|
char MessageBuffer[BusLogic_MessageBufferSize];
|
|
};
|
|
|
|
/*
|
|
Define a structure for the BIOS Disk Parameters.
|
|
*/
|
|
|
|
struct BIOS_DiskParameters {
|
|
int Heads;
|
|
int Sectors;
|
|
int Cylinders;
|
|
};
|
|
|
|
/*
|
|
Define a structure for the SCSI Inquiry command results.
|
|
*/
|
|
|
|
struct SCSI_Inquiry {
|
|
unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */
|
|
unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */
|
|
unsigned char DeviceTypeModifier:7; /* Byte 1 Bits 0-6 */
|
|
bool RMB:1; /* Byte 1 Bit 7 */
|
|
unsigned char ANSI_ApprovedVersion:3; /* Byte 2 Bits 0-2 */
|
|
unsigned char ECMA_Version:3; /* Byte 2 Bits 3-5 */
|
|
unsigned char ISO_Version:2; /* Byte 2 Bits 6-7 */
|
|
unsigned char ResponseDataFormat:4; /* Byte 3 Bits 0-3 */
|
|
unsigned char:2; /* Byte 3 Bits 4-5 */
|
|
bool TrmIOP:1; /* Byte 3 Bit 6 */
|
|
bool AENC:1; /* Byte 3 Bit 7 */
|
|
unsigned char AdditionalLength; /* Byte 4 */
|
|
unsigned char:8; /* Byte 5 */
|
|
unsigned char:8; /* Byte 6 */
|
|
bool SftRe:1; /* Byte 7 Bit 0 */
|
|
bool CmdQue:1; /* Byte 7 Bit 1 */
|
|
bool:1; /* Byte 7 Bit 2 */
|
|
bool Linked:1; /* Byte 7 Bit 3 */
|
|
bool Sync:1; /* Byte 7 Bit 4 */
|
|
bool WBus16:1; /* Byte 7 Bit 5 */
|
|
bool WBus32:1; /* Byte 7 Bit 6 */
|
|
bool RelAdr:1; /* Byte 7 Bit 7 */
|
|
unsigned char VendorIdentification[8]; /* Bytes 8-15 */
|
|
unsigned char ProductIdentification[16]; /* Bytes 16-31 */
|
|
unsigned char ProductRevisionLevel[4]; /* Bytes 32-35 */
|
|
};
|
|
|
|
|
|
/*
|
|
Define functions to provide an abstraction for reading and writing the
|
|
Host Adapter I/O Registers.
|
|
*/
|
|
|
|
static inline void BusLogic_SCSIBusReset(struct BusLogic_HostAdapter *HostAdapter)
|
|
{
|
|
union BusLogic_ControlRegister ControlRegister;
|
|
ControlRegister.All = 0;
|
|
ControlRegister.cr.SCSIBusReset = true;
|
|
outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
|
|
}
|
|
|
|
static inline void BusLogic_InterruptReset(struct BusLogic_HostAdapter *HostAdapter)
|
|
{
|
|
union BusLogic_ControlRegister ControlRegister;
|
|
ControlRegister.All = 0;
|
|
ControlRegister.cr.InterruptReset = true;
|
|
outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
|
|
}
|
|
|
|
static inline void BusLogic_SoftReset(struct BusLogic_HostAdapter *HostAdapter)
|
|
{
|
|
union BusLogic_ControlRegister ControlRegister;
|
|
ControlRegister.All = 0;
|
|
ControlRegister.cr.SoftReset = true;
|
|
outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
|
|
}
|
|
|
|
static inline void BusLogic_HardReset(struct BusLogic_HostAdapter *HostAdapter)
|
|
{
|
|
union BusLogic_ControlRegister ControlRegister;
|
|
ControlRegister.All = 0;
|
|
ControlRegister.cr.HardReset = true;
|
|
outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
|
|
}
|
|
|
|
static inline unsigned char BusLogic_ReadStatusRegister(struct BusLogic_HostAdapter *HostAdapter)
|
|
{
|
|
return inb(HostAdapter->IO_Address + BusLogic_StatusRegisterOffset);
|
|
}
|
|
|
|
static inline void BusLogic_WriteCommandParameterRegister(struct BusLogic_HostAdapter
|
|
*HostAdapter, unsigned char Value)
|
|
{
|
|
outb(Value, HostAdapter->IO_Address + BusLogic_CommandParameterRegisterOffset);
|
|
}
|
|
|
|
static inline unsigned char BusLogic_ReadDataInRegister(struct BusLogic_HostAdapter *HostAdapter)
|
|
{
|
|
return inb(HostAdapter->IO_Address + BusLogic_DataInRegisterOffset);
|
|
}
|
|
|
|
static inline unsigned char BusLogic_ReadInterruptRegister(struct BusLogic_HostAdapter *HostAdapter)
|
|
{
|
|
return inb(HostAdapter->IO_Address + BusLogic_InterruptRegisterOffset);
|
|
}
|
|
|
|
static inline unsigned char BusLogic_ReadGeometryRegister(struct BusLogic_HostAdapter *HostAdapter)
|
|
{
|
|
return inb(HostAdapter->IO_Address + BusLogic_GeometryRegisterOffset);
|
|
}
|
|
|
|
/*
|
|
BusLogic_StartMailboxCommand issues an Execute Mailbox Command, which
|
|
notifies the Host Adapter that an entry has been made in an Outgoing
|
|
Mailbox.
|
|
*/
|
|
|
|
static inline void BusLogic_StartMailboxCommand(struct BusLogic_HostAdapter *HostAdapter)
|
|
{
|
|
BusLogic_WriteCommandParameterRegister(HostAdapter, BusLogic_ExecuteMailboxCommand);
|
|
}
|
|
|
|
/*
|
|
BusLogic_Delay waits for Seconds to elapse.
|
|
*/
|
|
|
|
static inline void BusLogic_Delay(int Seconds)
|
|
{
|
|
mdelay(1000 * Seconds);
|
|
}
|
|
|
|
/*
|
|
Virtual_to_Bus and Bus_to_Virtual map between Kernel Virtual Addresses
|
|
and PCI/VLB/EISA/ISA Bus Addresses.
|
|
*/
|
|
|
|
static inline u32 Virtual_to_Bus(void *VirtualAddress)
|
|
{
|
|
return (u32) virt_to_bus(VirtualAddress);
|
|
}
|
|
|
|
static inline void *Bus_to_Virtual(u32 BusAddress)
|
|
{
|
|
return (void *) bus_to_virt(BusAddress);
|
|
}
|
|
|
|
/*
|
|
Virtual_to_32Bit_Virtual maps between Kernel Virtual Addresses and
|
|
32 bit Kernel Virtual Addresses. This avoids compilation warnings
|
|
on 64 bit architectures.
|
|
*/
|
|
|
|
static inline u32 Virtual_to_32Bit_Virtual(void *VirtualAddress)
|
|
{
|
|
return (u32) (unsigned long) VirtualAddress;
|
|
}
|
|
|
|
/*
|
|
BusLogic_IncrementErrorCounter increments Error Counter by 1, stopping at
|
|
65535 rather than wrapping around to 0.
|
|
*/
|
|
|
|
static inline void BusLogic_IncrementErrorCounter(unsigned short *ErrorCounter)
|
|
{
|
|
if (*ErrorCounter < 65535)
|
|
(*ErrorCounter)++;
|
|
}
|
|
|
|
/*
|
|
BusLogic_IncrementByteCounter increments Byte Counter by Amount.
|
|
*/
|
|
|
|
static inline void BusLogic_IncrementByteCounter(struct BusLogic_ByteCounter
|
|
*ByteCounter, unsigned int Amount)
|
|
{
|
|
ByteCounter->Units += Amount;
|
|
if (ByteCounter->Units > 999999999) {
|
|
ByteCounter->Units -= 1000000000;
|
|
ByteCounter->Billions++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
BusLogic_IncrementSizeBucket increments the Bucket for Amount.
|
|
*/
|
|
|
|
static inline void BusLogic_IncrementSizeBucket(BusLogic_CommandSizeBuckets_T CommandSizeBuckets, unsigned int Amount)
|
|
{
|
|
int Index = 0;
|
|
if (Amount < 8 * 1024) {
|
|
if (Amount < 2 * 1024)
|
|
Index = (Amount < 1 * 1024 ? 0 : 1);
|
|
else
|
|
Index = (Amount < 4 * 1024 ? 2 : 3);
|
|
} else if (Amount < 128 * 1024) {
|
|
if (Amount < 32 * 1024)
|
|
Index = (Amount < 16 * 1024 ? 4 : 5);
|
|
else
|
|
Index = (Amount < 64 * 1024 ? 6 : 7);
|
|
} else
|
|
Index = (Amount < 256 * 1024 ? 8 : 9);
|
|
CommandSizeBuckets[Index]++;
|
|
}
|
|
|
|
/*
|
|
Define the version number of the FlashPoint Firmware (SCCB Manager).
|
|
*/
|
|
|
|
#define FlashPoint_FirmwareVersion "5.02"
|
|
|
|
/*
|
|
Define the possible return values from FlashPoint_HandleInterrupt.
|
|
*/
|
|
|
|
#define FlashPoint_NormalInterrupt 0x00
|
|
#define FlashPoint_InternalError 0xFE
|
|
#define FlashPoint_ExternalBusReset 0xFF
|
|
|
|
/*
|
|
Define prototypes for the forward referenced BusLogic Driver
|
|
Internal Functions.
|
|
*/
|
|
|
|
static const char *BusLogic_DriverInfo(struct Scsi_Host *);
|
|
static int BusLogic_QueueCommand(struct scsi_cmnd *, void (*CompletionRoutine) (struct scsi_cmnd *));
|
|
static int BusLogic_BIOSDiskParameters(struct scsi_device *, struct block_device *, sector_t, int *);
|
|
static int BusLogic_ProcDirectoryInfo(struct Scsi_Host *, char *, char **, off_t, int, int);
|
|
static int BusLogic_SlaveConfigure(struct scsi_device *);
|
|
static void BusLogic_QueueCompletedCCB(struct BusLogic_CCB *);
|
|
static irqreturn_t BusLogic_InterruptHandler(int, void *);
|
|
static int BusLogic_ResetHostAdapter(struct BusLogic_HostAdapter *, bool HardReset);
|
|
static void BusLogic_Message(enum BusLogic_MessageLevel, char *, struct BusLogic_HostAdapter *, ...);
|
|
static int __init BusLogic_Setup(char *);
|
|
|
|
#endif /* _BUSLOGIC_H */
|