Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/arm/kernel/entry-common.S
Kirill A. Shutemov 4fb2847437 ARM: 5727/1: Pass IFSR register to do_PrefetchAbort() 
Instruction fault status register, IFSR, was introduced on ARMv6 to
provide status information about the last insturction fault. It
needed for proper prefetch abort handling.

Now we have three prefetch abort model:

  * legacy - for CPUs before ARMv6. They doesn't provide neither
    IFSR nor IFAR. We simulate IFSR with section translation fault
    status for them to generalize code;
  * ARMv6 - provides IFSR, but not IFAR;
  * ARMv7 - provides both IFSR and IFAR.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-02 22:34:32 +01:00

477 lines
10 KiB
ArmAsm
Raw Blame History

/*
* linux/arch/arm/kernel/entry-common.S
*
* Copyright (C) 2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <asm/unistd.h>
#include <asm/ftrace.h>
#include <mach/entry-macro.S>
#include <asm/unwind.h>
#include "entry-header.S"
.align 5
/*
* This is the fast syscall return path. We do as little as
* possible here, and this includes saving r0 back into the SVC
* stack.
*/
ret_fast_syscall:
UNWIND(.fnstart )
UNWIND(.cantunwind )
disable_irq @ disable interrupts
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne fast_work_pending
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
restore_user_regs fast = 1, offset = S_OFF
UNWIND(.fnend )
/*
* Ok, we need to do extra processing, enter the slow path.
*/
fast_work_pending:
str r0, [sp, #S_R0+S_OFF]! @ returned r0
work_pending:
tst r1, #_TIF_NEED_RESCHED
bne work_resched
tst r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
beq no_work_pending
mov r0, sp @ 'regs'
mov r2, why @ 'syscall'
bl do_notify_resume
b ret_slow_syscall @ Check work again
work_resched:
bl schedule
/*
* "slow" syscall return path. "why" tells us if this was a real syscall.
*/
ENTRY(ret_to_user)
ret_slow_syscall:
disable_irq @ disable interrupts
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne work_pending
no_work_pending:
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
restore_user_regs fast = 0, offset = 0
ENDPROC(ret_to_user)
/*
* This is how we return from a fork.
*/
ENTRY(ret_from_fork)
bl schedule_tail
get_thread_info tsk
ldr r1, [tsk, #TI_FLAGS] @ check for syscall tracing
mov why, #1
tst r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
beq ret_slow_syscall
mov r1, sp
mov r0, #1 @ trace exit [IP = 1]
bl syscall_trace
b ret_slow_syscall
ENDPROC(ret_from_fork)
.equ NR_syscalls,0
#define CALL(x) .equ NR_syscalls,NR_syscalls+1
#include "calls.S"
#undef CALL
#define CALL(x) .long x
#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(mcount)
stmdb sp!, {r0-r3, lr}
mov r0, lr
sub r0, r0, #MCOUNT_INSN_SIZE
.globl mcount_call
mcount_call:
bl ftrace_stub
ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
ENTRY(ftrace_caller)
stmdb sp!, {r0-r3, lr}
ldr r1, [fp, #-4]
mov r0, lr
sub r0, r0, #MCOUNT_INSN_SIZE
.globl ftrace_call
ftrace_call:
bl ftrace_stub
ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
#else
ENTRY(__gnu_mcount_nc)
stmdb sp!, {r0-r3, lr}
ldr r0, =ftrace_trace_function
ldr r2, [r0]
adr r0, ftrace_stub
cmp r0, r2
bne gnu_trace
ldmia sp!, {r0-r3, ip, lr}
mov pc, ip
gnu_trace:
ldr r1, [sp, #20] @ lr of instrumented routine
mov r0, lr
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc
mov pc, r2
ldmia sp!, {r0-r3, ip, lr}
mov pc, ip
ENTRY(mcount)
stmdb sp!, {r0-r3, lr}
ldr r0, =ftrace_trace_function
ldr r2, [r0]
adr r0, ftrace_stub
cmp r0, r2
bne trace
ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
trace:
ldr r1, [fp, #-4] @ lr of instrumented routine
mov r0, lr
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc
mov pc, r2
ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
#endif /* CONFIG_DYNAMIC_FTRACE */
.globl ftrace_stub
ftrace_stub:
mov pc, lr
#endif /* CONFIG_FUNCTION_TRACER */
/*=============================================================================
* SWI handler
*-----------------------------------------------------------------------------
*/
/* If we're optimising for StrongARM the resulting code won't
run on an ARM7 and we can save a couple of instructions.
--pb */
#ifdef CONFIG_CPU_ARM710
#define A710(code...) code
.Larm710bug:
ldmia sp, {r0 - lr}^ @ Get calling r0 - lr
mov r0, r0
add sp, sp, #S_FRAME_SIZE
subs pc, lr, #4
#else
#define A710(code...)
#endif
.align 5
ENTRY(vector_swi)
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Calling r0 - r12
ARM( add r8, sp, #S_PC )
ARM( stmdb r8, {sp, lr}^ ) @ Calling sp, lr
THUMB( mov r8, sp )
THUMB( store_user_sp_lr r8, r10, S_SP ) @ calling sp, lr
mrs r8, spsr @ called from non-FIQ mode, so ok.
str lr, [sp, #S_PC] @ Save calling PC
str r8, [sp, #S_PSR] @ Save CPSR
str r0, [sp, #S_OLD_R0] @ Save OLD_R0
zero_fp
/*
* Get the system call number.
*/
#if defined(CONFIG_OABI_COMPAT)
/*
* If we have CONFIG_OABI_COMPAT then we need to look at the swi
* value to determine if it is an EABI or an old ABI call.
*/
#ifdef CONFIG_ARM_THUMB
tst r8, #PSR_T_BIT
movne r10, #0 @ no thumb OABI emulation
ldreq r10, [lr, #-4] @ get SWI instruction
#else
ldr r10, [lr, #-4] @ get SWI instruction
A710( and ip, r10, #0x0f000000 @ check for SWI )
A710( teq ip, #0x0f000000 )
A710( bne .Larm710bug )
#endif
#ifdef CONFIG_CPU_ENDIAN_BE8
rev r10, r10 @ little endian instruction
#endif
#elif defined(CONFIG_AEABI)
/*
* Pure EABI user space always put syscall number into scno (r7).
*/
A710( ldr ip, [lr, #-4] @ get SWI instruction )
A710( and ip, ip, #0x0f000000 @ check for SWI )
A710( teq ip, #0x0f000000 )
A710( bne .Larm710bug )
#elif defined(CONFIG_ARM_THUMB)
/* Legacy ABI only, possibly thumb mode. */
tst r8, #PSR_T_BIT @ this is SPSR from save_user_regs
addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
ldreq scno, [lr, #-4]
#else
/* Legacy ABI only. */
ldr scno, [lr, #-4] @ get SWI instruction
A710( and ip, scno, #0x0f000000 @ check for SWI )
A710( teq ip, #0x0f000000 )
A710( bne .Larm710bug )
#endif
#ifdef CONFIG_ALIGNMENT_TRAP
ldr ip, __cr_alignment
ldr ip, [ip]
mcr p15, 0, ip, c1, c0 @ update control register
#endif
enable_irq
get_thread_info tsk
adr tbl, sys_call_table @ load syscall table pointer
ldr ip, [tsk, #TI_FLAGS] @ check for syscall tracing
#if defined(CONFIG_OABI_COMPAT)
/*
* If the swi argument is zero, this is an EABI call and we do nothing.
*
* If this is an old ABI call, get the syscall number into scno and
* get the old ABI syscall table address.
*/
bics r10, r10, #0xff000000
eorne scno, r10, #__NR_OABI_SYSCALL_BASE
ldrne tbl, =sys_oabi_call_table
#elif !defined(CONFIG_AEABI)
bic scno, scno, #0xff000000 @ mask off SWI op-code
eor scno, scno, #__NR_SYSCALL_BASE @ check OS number
#endif
stmdb sp!, {r4, r5} @ push fifth and sixth args
tst ip, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
bne __sys_trace
cmp scno, #NR_syscalls @ check upper syscall limit
adr lr, BSYM(ret_fast_syscall) @ return address
ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
add r1, sp, #S_OFF
2: mov why, #0 @ no longer a real syscall
cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
bcs arm_syscall
b sys_ni_syscall @ not private func
ENDPROC(vector_swi)
/*
* This is the really slow path. We're going to be doing
* context switches, and waiting for our parent to respond.
*/
__sys_trace:
mov r2, scno
add r1, sp, #S_OFF
mov r0, #0 @ trace entry [IP = 0]
bl syscall_trace
adr lr, BSYM(__sys_trace_return) @ return address
mov scno, r0 @ syscall number (possibly new)
add r1, sp, #S_R0 + S_OFF @ pointer to regs
cmp scno, #NR_syscalls @ check upper syscall limit
ldmccia r1, {r0 - r3} @ have to reload r0 - r3
ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
b 2b
__sys_trace_return:
str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
mov r2, scno
mov r1, sp
mov r0, #1 @ trace exit [IP = 1]
bl syscall_trace
b ret_slow_syscall
.align 5
#ifdef CONFIG_ALIGNMENT_TRAP
.type __cr_alignment, #object
__cr_alignment:
.word cr_alignment
#endif
.ltorg
/*
* This is the syscall table declaration for native ABI syscalls.
* With EABI a couple syscalls are obsolete and defined as sys_ni_syscall.
*/
#define ABI(native, compat) native
#ifdef CONFIG_AEABI
#define OBSOLETE(syscall) sys_ni_syscall
#else
#define OBSOLETE(syscall) syscall
#endif
.type sys_call_table, #object
ENTRY(sys_call_table)
#include "calls.S"
#undef ABI
#undef OBSOLETE
/*============================================================================
* Special system call wrappers
*/
@ r0 = syscall number
@ r8 = syscall table
sys_syscall:
bic scno, r0, #__NR_OABI_SYSCALL_BASE
cmp scno, #__NR_syscall - __NR_SYSCALL_BASE
cmpne scno, #NR_syscalls @ check range
stmloia sp, {r5, r6} @ shuffle args
movlo r0, r1
movlo r1, r2
movlo r2, r3
movlo r3, r4
ldrlo pc, [tbl, scno, lsl #2]
b sys_ni_syscall
ENDPROC(sys_syscall)
sys_fork_wrapper:
add r0, sp, #S_OFF
b sys_fork
ENDPROC(sys_fork_wrapper)
sys_vfork_wrapper:
add r0, sp, #S_OFF
b sys_vfork
ENDPROC(sys_vfork_wrapper)
sys_execve_wrapper:
add r3, sp, #S_OFF
b sys_execve
ENDPROC(sys_execve_wrapper)
sys_clone_wrapper:
add ip, sp, #S_OFF
str ip, [sp, #4]
b sys_clone
ENDPROC(sys_clone_wrapper)
sys_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_sigreturn
ENDPROC(sys_sigreturn_wrapper)
sys_rt_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_rt_sigreturn
ENDPROC(sys_rt_sigreturn_wrapper)
sys_sigaltstack_wrapper:
ldr r2, [sp, #S_OFF + S_SP]
b do_sigaltstack
ENDPROC(sys_sigaltstack_wrapper)
sys_statfs64_wrapper:
teq r1, #88
moveq r1, #84
b sys_statfs64
ENDPROC(sys_statfs64_wrapper)
sys_fstatfs64_wrapper:
teq r1, #88
moveq r1, #84
b sys_fstatfs64
ENDPROC(sys_fstatfs64_wrapper)
/*
* Note: off_4k (r5) is always units of 4K. If we can't do the requested
* offset, we return EINVAL.
*/
sys_mmap2:
#if PAGE_SHIFT > 12
tst r5, #PGOFF_MASK
moveq r5, r5, lsr #PAGE_SHIFT - 12
streq r5, [sp, #4]
beq do_mmap2
mov r0, #-EINVAL
mov pc, lr
#else
str r5, [sp, #4]
b do_mmap2
#endif
ENDPROC(sys_mmap2)
#ifdef CONFIG_OABI_COMPAT
/*
* These are syscalls with argument register differences
*/
sys_oabi_pread64:
stmia sp, {r3, r4}
b sys_pread64
ENDPROC(sys_oabi_pread64)
sys_oabi_pwrite64:
stmia sp, {r3, r4}
b sys_pwrite64
ENDPROC(sys_oabi_pwrite64)
sys_oabi_truncate64:
mov r3, r2
mov r2, r1
b sys_truncate64
ENDPROC(sys_oabi_truncate64)
sys_oabi_ftruncate64:
mov r3, r2
mov r2, r1
b sys_ftruncate64
ENDPROC(sys_oabi_ftruncate64)
sys_oabi_readahead:
str r3, [sp]
mov r3, r2
mov r2, r1
b sys_readahead
ENDPROC(sys_oabi_readahead)
/*
* Let's declare a second syscall table for old ABI binaries
* using the compatibility syscall entries.
*/
#define ABI(native, compat) compat
#define OBSOLETE(syscall) syscall
.type sys_oabi_call_table, #object
ENTRY(sys_oabi_call_table)
#include "calls.S"
#undef ABI
#undef OBSOLETE
#endif
Reference in a new issue View git blame Copy permalink