c3f22d92a1
Add the wusb_phy_rate sysfs file to Wireless USB host controllers. This sets the maximum PHY rate that will be used for all connected devices. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
414 lines
14 KiB
C
414 lines
14 KiB
C
/*
|
|
* Wireless Host Controller (WHC) data structures.
|
|
*
|
|
* Copyright (C) 2007 Cambridge Silicon Radio Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License version
|
|
* 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA.
|
|
*/
|
|
#ifndef _WHCI_WHCI_HC_H
|
|
#define _WHCI_WHCI_HC_H
|
|
|
|
#include <linux/list.h>
|
|
|
|
/**
|
|
* WHCI_PAGE_SIZE - page size use by WHCI
|
|
*
|
|
* WHCI assumes that host system uses pages of 4096 octets.
|
|
*/
|
|
#define WHCI_PAGE_SIZE 4096
|
|
|
|
|
|
/**
|
|
* QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single
|
|
* qtd.
|
|
*
|
|
* This is 2^20 - 1.
|
|
*/
|
|
#define QTD_MAX_XFER_SIZE 1048575
|
|
|
|
|
|
/**
|
|
* struct whc_qtd - Queue Element Transfer Descriptors (qTD)
|
|
*
|
|
* This describes the data for a bulk, control or interrupt transfer.
|
|
*
|
|
* [WHCI] section 3.2.4
|
|
*/
|
|
struct whc_qtd {
|
|
__le32 status; /*< remaining transfer len and transfer status */
|
|
__le32 options;
|
|
__le64 page_list_ptr; /*< physical pointer to data buffer page list*/
|
|
__u8 setup[8]; /*< setup data for control transfers */
|
|
} __attribute__((packed));
|
|
|
|
#define QTD_STS_ACTIVE (1 << 31) /* enable execution of transaction */
|
|
#define QTD_STS_HALTED (1 << 30) /* transfer halted */
|
|
#define QTD_STS_DBE (1 << 29) /* data buffer error */
|
|
#define QTD_STS_BABBLE (1 << 28) /* babble detected */
|
|
#define QTD_STS_RCE (1 << 27) /* retry count exceeded */
|
|
#define QTD_STS_LAST_PKT (1 << 26) /* set Last Packet Flag in WUSB header */
|
|
#define QTD_STS_INACTIVE (1 << 25) /* queue set is marked inactive */
|
|
#define QTD_STS_IALT_VALID (1 << 23) /* iAlt field is valid */
|
|
#define QTD_STS_IALT(i) (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */
|
|
#define QTD_STS_LEN(l) ((l) << 0) /* transfer length */
|
|
#define QTD_STS_TO_LEN(s) ((s) & 0x000fffff)
|
|
|
|
#define QTD_OPT_IOC (1 << 1) /* page_list_ptr points to buffer directly */
|
|
#define QTD_OPT_SMALL (1 << 0) /* interrupt on complete */
|
|
|
|
/**
|
|
* struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD)
|
|
*
|
|
* This describes the data and other parameters for an isochronous
|
|
* transfer.
|
|
*
|
|
* [WHCI] section 3.2.5
|
|
*/
|
|
struct whc_itd {
|
|
__le16 presentation_time; /*< presentation time for OUT transfers */
|
|
__u8 num_segments; /*< number of data segments in segment list */
|
|
__u8 status; /*< command execution status */
|
|
__le32 options; /*< misc transfer options */
|
|
__le64 page_list_ptr; /*< physical pointer to data buffer page list */
|
|
__le64 seg_list_ptr; /*< physical pointer to segment list */
|
|
} __attribute__((packed));
|
|
|
|
#define ITD_STS_ACTIVE (1 << 7) /* enable execution of transaction */
|
|
#define ITD_STS_DBE (1 << 5) /* data buffer error */
|
|
#define ITD_STS_BABBLE (1 << 4) /* babble detected */
|
|
#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */
|
|
|
|
#define ITD_OPT_IOC (1 << 1) /* interrupt on complete */
|
|
#define ITD_OPT_SMALL (1 << 0) /* page_list_ptr points to buffer directly */
|
|
|
|
/**
|
|
* Page list entry.
|
|
*
|
|
* A TD's page list must contain sufficient page list entries for the
|
|
* total data length in the TD.
|
|
*
|
|
* [WHCI] section 3.2.4.3
|
|
*/
|
|
struct whc_page_list_entry {
|
|
__le64 buf_ptr; /*< physical pointer to buffer */
|
|
} __attribute__((packed));
|
|
|
|
/**
|
|
* struct whc_seg_list_entry - Segment list entry.
|
|
*
|
|
* Describes a portion of the data buffer described in the containing
|
|
* qTD's page list.
|
|
*
|
|
* seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr
|
|
* + qtd->seg_list_ptr[seg].offset;
|
|
*
|
|
* Segments can't cross page boundries.
|
|
*
|
|
* [WHCI] section 3.2.5.5
|
|
*/
|
|
struct whc_seg_list_entry {
|
|
__le16 len; /*< segment length */
|
|
__u8 idx; /*< index into page list */
|
|
__u8 status; /*< segment status */
|
|
__le16 offset; /*< 12 bit offset into page */
|
|
} __attribute__((packed));
|
|
|
|
/**
|
|
* struct whc_qhead - endpoint and status information for a qset.
|
|
*
|
|
* [WHCI] section 3.2.6
|
|
*/
|
|
struct whc_qhead {
|
|
__le64 link; /*< next qset in list */
|
|
__le32 info1;
|
|
__le32 info2;
|
|
__le32 info3;
|
|
__le16 status;
|
|
__le16 err_count; /*< transaction error count */
|
|
__le32 cur_window;
|
|
__le32 scratch[3]; /*< h/w scratch area */
|
|
union {
|
|
struct whc_qtd qtd;
|
|
struct whc_itd itd;
|
|
} overlay;
|
|
} __attribute__((packed));
|
|
|
|
#define QH_LINK_PTR_MASK (~0x03Full)
|
|
#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK)
|
|
#define QH_LINK_IQS (1 << 4) /* isochronous queue set */
|
|
#define QH_LINK_NTDS(n) (((n) - 1) << 1) /* number of TDs in queue set */
|
|
#define QH_LINK_T (1 << 0) /* last queue set in periodic schedule list */
|
|
|
|
#define QH_INFO1_EP(e) ((e) << 0) /* endpoint number */
|
|
#define QH_INFO1_DIR_IN (1 << 4) /* IN transfer */
|
|
#define QH_INFO1_DIR_OUT (0 << 4) /* OUT transfer */
|
|
#define QH_INFO1_TR_TYPE_CTRL (0x0 << 5) /* control transfer */
|
|
#define QH_INFO1_TR_TYPE_ISOC (0x1 << 5) /* isochronous transfer */
|
|
#define QH_INFO1_TR_TYPE_BULK (0x2 << 5) /* bulk transfer */
|
|
#define QH_INFO1_TR_TYPE_INT (0x3 << 5) /* interrupt */
|
|
#define QH_INFO1_TR_TYPE_LP_INT (0x7 << 5) /* low power interrupt */
|
|
#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8) /* index into device info buffer */
|
|
#define QH_INFO1_SET_INACTIVE (1 << 15) /* set inactive after transfer */
|
|
#define QH_INFO1_MAX_PKT_LEN(l) ((l) << 16) /* maximum packet length */
|
|
|
|
#define QH_INFO2_BURST(b) ((b) << 0) /* maximum burst length */
|
|
#define QH_INFO2_DBP(p) ((p) << 5) /* data burst policy (see [WUSB] table 5-7) */
|
|
#define QH_INFO2_MAX_COUNT(c) ((c) << 8) /* max isoc/int pkts per zone */
|
|
#define QH_INFO2_RQS (1 << 15) /* reactivate queue set */
|
|
#define QH_INFO2_MAX_RETRY(r) ((r) << 16) /* maximum transaction retries */
|
|
#define QH_INFO2_MAX_SEQ(s) ((s) << 20) /* maximum sequence number */
|
|
#define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */
|
|
#define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */
|
|
|
|
#define QH_INFO3_TX_RATE(r) ((r) << 24) /* PHY rate (see [ECMA-368] section 10.3.1.1) */
|
|
#define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */
|
|
|
|
#define QH_STATUS_FLOW_CTRL (1 << 15)
|
|
#define QH_STATUS_ICUR(i) ((i) << 5)
|
|
#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7)
|
|
#define QH_STATUS_SEQ_MASK 0x1f
|
|
|
|
/**
|
|
* usb_pipe_to_qh_type - USB core pipe type to QH transfer type
|
|
*
|
|
* Returns the QH type field for a USB core pipe type.
|
|
*/
|
|
static inline unsigned usb_pipe_to_qh_type(unsigned pipe)
|
|
{
|
|
static const unsigned type[] = {
|
|
[PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC,
|
|
[PIPE_INTERRUPT] = QH_INFO1_TR_TYPE_INT,
|
|
[PIPE_CONTROL] = QH_INFO1_TR_TYPE_CTRL,
|
|
[PIPE_BULK] = QH_INFO1_TR_TYPE_BULK,
|
|
};
|
|
return type[usb_pipetype(pipe)];
|
|
}
|
|
|
|
/**
|
|
* Maxiumum number of TDs in a qset.
|
|
*/
|
|
#define WHCI_QSET_TD_MAX 8
|
|
|
|
/**
|
|
* struct whc_qset - WUSB data transfers to a specific endpoint
|
|
* @qh: the QHead of this qset
|
|
* @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt
|
|
* transfers)
|
|
* @itd: up to 8 iTDs (for qsets for isochronous transfers)
|
|
* @qset_dma: DMA address for this qset
|
|
* @whc: WHCI HC this qset is for
|
|
* @ep: endpoint
|
|
* @stds: list of sTDs queued to this qset
|
|
* @ntds: number of qTDs queued (not necessarily the same as nTDs
|
|
* field in the QH)
|
|
* @td_start: index of the first qTD in the list
|
|
* @td_end: index of next free qTD in the list (provided
|
|
* ntds < WHCI_QSET_TD_MAX)
|
|
*
|
|
* Queue Sets (qsets) are added to the asynchronous schedule list
|
|
* (ASL) or the periodic zone list (PZL).
|
|
*
|
|
* qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate).
|
|
* Each TD may refer to at most 1 MiB of data. If a single transfer
|
|
* has > 8MiB of data, TDs can be reused as they are completed since
|
|
* the TD list is used as a circular buffer. Similarly, several
|
|
* (smaller) transfers may be queued in a qset.
|
|
*
|
|
* WHCI controllers may cache portions of the qsets in the ASL and
|
|
* PZL, requiring the WHCD to inform the WHC that the lists have been
|
|
* updated (fields changed or qsets inserted or removed). For safe
|
|
* insertion and removal of qsets from the lists the schedule must be
|
|
* stopped to avoid races in updating the QH link pointers.
|
|
*
|
|
* Since the HC is free to execute qsets in any order, all transfers
|
|
* to an endpoint should use the same qset to ensure transfers are
|
|
* executed in the order they're submitted.
|
|
*
|
|
* [WHCI] section 3.2.3
|
|
*/
|
|
struct whc_qset {
|
|
struct whc_qhead qh;
|
|
union {
|
|
struct whc_qtd qtd[WHCI_QSET_TD_MAX];
|
|
struct whc_itd itd[WHCI_QSET_TD_MAX];
|
|
};
|
|
|
|
/* private data for WHCD */
|
|
dma_addr_t qset_dma;
|
|
struct whc *whc;
|
|
struct usb_host_endpoint *ep;
|
|
struct list_head stds;
|
|
int ntds;
|
|
int td_start;
|
|
int td_end;
|
|
struct list_head list_node;
|
|
unsigned in_sw_list:1;
|
|
unsigned in_hw_list:1;
|
|
unsigned remove:1;
|
|
unsigned reset:1;
|
|
struct urb *pause_after_urb;
|
|
struct completion remove_complete;
|
|
uint16_t max_packet;
|
|
uint8_t max_burst;
|
|
uint8_t max_seq;
|
|
};
|
|
|
|
static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target)
|
|
{
|
|
if (target)
|
|
*ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target);
|
|
else
|
|
*ptr = QH_LINK_T;
|
|
}
|
|
|
|
/**
|
|
* struct di_buf_entry - Device Information (DI) buffer entry.
|
|
*
|
|
* There's one of these per connected device.
|
|
*/
|
|
struct di_buf_entry {
|
|
__le32 availability_info[8]; /*< MAS availability information, one MAS per bit */
|
|
__le32 addr_sec_info; /*< addressing and security info */
|
|
__le32 reserved[7];
|
|
} __attribute__((packed));
|
|
|
|
#define WHC_DI_SECURE (1 << 31)
|
|
#define WHC_DI_DISABLE (1 << 30)
|
|
#define WHC_DI_KEY_IDX(k) ((k) << 8)
|
|
#define WHC_DI_KEY_IDX_MASK 0x0000ff00
|
|
#define WHC_DI_DEV_ADDR(a) ((a) << 0)
|
|
#define WHC_DI_DEV_ADDR_MASK 0x000000ff
|
|
|
|
/**
|
|
* struct dn_buf_entry - Device Notification (DN) buffer entry.
|
|
*
|
|
* [WHCI] section 3.2.8
|
|
*/
|
|
struct dn_buf_entry {
|
|
__u8 msg_size; /*< number of octets of valid DN data */
|
|
__u8 reserved1;
|
|
__u8 src_addr; /*< source address */
|
|
__u8 status; /*< buffer entry status */
|
|
__le32 tkid; /*< TKID for source device, valid if secure bit is set */
|
|
__u8 dn_data[56]; /*< up to 56 octets of DN data */
|
|
} __attribute__((packed));
|
|
|
|
#define WHC_DN_STATUS_VALID (1 << 7) /* buffer entry is valid */
|
|
#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */
|
|
|
|
#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry))
|
|
|
|
/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of
|
|
data. [WHCI] section 2.4.7. */
|
|
#define WHC_GEN_CMD_DATA_LEN 256
|
|
|
|
/*
|
|
* HC registers.
|
|
*
|
|
* [WHCI] section 2.4
|
|
*/
|
|
|
|
#define WHCIVERSION 0x00
|
|
|
|
#define WHCSPARAMS 0x04
|
|
# define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff)
|
|
# define WHCSPARAMS_TO_N_KEYS(p) (((p) >> 8) & 0xff)
|
|
# define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f)
|
|
|
|
#define WUSBCMD 0x08
|
|
# define WUSBCMD_BCID(b) ((b) << 16)
|
|
# define WUSBCMD_BCID_MASK (0xff << 16)
|
|
# define WUSBCMD_ASYNC_QSET_RM (1 << 12)
|
|
# define WUSBCMD_PERIODIC_QSET_RM (1 << 11)
|
|
# define WUSBCMD_WUSBSI(s) ((s) << 8)
|
|
# define WUSBCMD_WUSBSI_MASK (0x7 << 8)
|
|
# define WUSBCMD_ASYNC_SYNCED_DB (1 << 7)
|
|
# define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6)
|
|
# define WUSBCMD_ASYNC_UPDATED (1 << 5)
|
|
# define WUSBCMD_PERIODIC_UPDATED (1 << 4)
|
|
# define WUSBCMD_ASYNC_EN (1 << 3)
|
|
# define WUSBCMD_PERIODIC_EN (1 << 2)
|
|
# define WUSBCMD_WHCRESET (1 << 1)
|
|
# define WUSBCMD_RUN (1 << 0)
|
|
|
|
#define WUSBSTS 0x0c
|
|
# define WUSBSTS_ASYNC_SCHED (1 << 15)
|
|
# define WUSBSTS_PERIODIC_SCHED (1 << 14)
|
|
# define WUSBSTS_DNTS_SCHED (1 << 13)
|
|
# define WUSBSTS_HCHALTED (1 << 12)
|
|
# define WUSBSTS_GEN_CMD_DONE (1 << 9)
|
|
# define WUSBSTS_CHAN_TIME_ROLLOVER (1 << 8)
|
|
# define WUSBSTS_DNTS_OVERFLOW (1 << 7)
|
|
# define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6)
|
|
# define WUSBSTS_HOST_ERR (1 << 5)
|
|
# define WUSBSTS_ASYNC_SCHED_SYNCED (1 << 4)
|
|
# define WUSBSTS_PERIODIC_SCHED_SYNCED (1 << 3)
|
|
# define WUSBSTS_DNTS_INT (1 << 2)
|
|
# define WUSBSTS_ERR_INT (1 << 1)
|
|
# define WUSBSTS_INT (1 << 0)
|
|
# define WUSBSTS_INT_MASK 0x3ff
|
|
|
|
#define WUSBINTR 0x10
|
|
# define WUSBINTR_GEN_CMD_DONE (1 << 9)
|
|
# define WUSBINTR_CHAN_TIME_ROLLOVER (1 << 8)
|
|
# define WUSBINTR_DNTS_OVERFLOW (1 << 7)
|
|
# define WUSBINTR_BPST_ADJUSTMENT_CHANGED (1 << 6)
|
|
# define WUSBINTR_HOST_ERR (1 << 5)
|
|
# define WUSBINTR_ASYNC_SCHED_SYNCED (1 << 4)
|
|
# define WUSBINTR_PERIODIC_SCHED_SYNCED (1 << 3)
|
|
# define WUSBINTR_DNTS_INT (1 << 2)
|
|
# define WUSBINTR_ERR_INT (1 << 1)
|
|
# define WUSBINTR_INT (1 << 0)
|
|
# define WUSBINTR_ALL 0x3ff
|
|
|
|
#define WUSBGENCMDSTS 0x14
|
|
# define WUSBGENCMDSTS_ACTIVE (1 << 31)
|
|
# define WUSBGENCMDSTS_ERROR (1 << 24)
|
|
# define WUSBGENCMDSTS_IOC (1 << 23)
|
|
# define WUSBGENCMDSTS_MMCIE_ADD 0x01
|
|
# define WUSBGENCMDSTS_MMCIE_RM 0x02
|
|
# define WUSBGENCMDSTS_SET_MAS 0x03
|
|
# define WUSBGENCMDSTS_CHAN_STOP 0x04
|
|
# define WUSBGENCMDSTS_RWP_EN 0x05
|
|
|
|
#define WUSBGENCMDPARAMS 0x18
|
|
#define WUSBGENADDR 0x20
|
|
#define WUSBASYNCLISTADDR 0x28
|
|
#define WUSBDNTSBUFADDR 0x30
|
|
#define WUSBDEVICEINFOADDR 0x38
|
|
|
|
#define WUSBSETSECKEYCMD 0x40
|
|
# define WUSBSETSECKEYCMD_SET (1 << 31)
|
|
# define WUSBSETSECKEYCMD_ERASE (1 << 30)
|
|
# define WUSBSETSECKEYCMD_GTK (1 << 8)
|
|
# define WUSBSETSECKEYCMD_IDX(i) ((i) << 0)
|
|
|
|
#define WUSBTKID 0x44
|
|
#define WUSBSECKEY 0x48
|
|
#define WUSBPERIODICLISTBASE 0x58
|
|
#define WUSBMASINDEX 0x60
|
|
|
|
#define WUSBDNTSCTRL 0x64
|
|
# define WUSBDNTSCTRL_ACTIVE (1 << 31)
|
|
# define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8)
|
|
# define WUSBDNTSCTRL_SLOTS(s) ((s) << 0)
|
|
|
|
#define WUSBTIME 0x68
|
|
# define WUSBTIME_CHANNEL_TIME_MASK 0x00ffffff
|
|
|
|
#define WUSBBPST 0x6c
|
|
#define WUSBDIBUPDATED 0x70
|
|
|
|
#endif /* #ifndef _WHCI_WHCI_HC_H */
|