394cf0a1ca
Split the core header files into manageable pieces. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
214 lines
6.6 KiB
C
214 lines
6.6 KiB
C
/*
|
|
* Copyright (c) 2004 Sam Leffler, Errno Consulting
|
|
* Copyright (c) 2004 Video54 Technologies, Inc.
|
|
* Copyright (c) 2008 Atheros Communications Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#ifndef RC_H
|
|
#define RC_H
|
|
|
|
struct ath_softc;
|
|
|
|
#define ATH_RATE_MAX 30
|
|
#define RATE_TABLE_SIZE 64
|
|
#define MAX_TX_RATE_PHY 48
|
|
#define WLAN_CTRL_FRAME_SIZE (2+2+6+4)
|
|
|
|
/* VALID_ALL - valid for 20/40/Legacy,
|
|
* VALID - Legacy only,
|
|
* VALID_20 - HT 20 only,
|
|
* VALID_40 - HT 40 only */
|
|
|
|
#define INVALID 0x0
|
|
#define VALID 0x1
|
|
#define VALID_20 0x2
|
|
#define VALID_40 0x4
|
|
#define VALID_2040 (VALID_20|VALID_40)
|
|
#define VALID_ALL (VALID_2040|VALID)
|
|
|
|
enum {
|
|
WLAN_RC_PHY_OFDM,
|
|
WLAN_RC_PHY_CCK,
|
|
WLAN_RC_PHY_HT_20_SS,
|
|
WLAN_RC_PHY_HT_20_DS,
|
|
WLAN_RC_PHY_HT_40_SS,
|
|
WLAN_RC_PHY_HT_40_DS,
|
|
WLAN_RC_PHY_HT_20_SS_HGI,
|
|
WLAN_RC_PHY_HT_20_DS_HGI,
|
|
WLAN_RC_PHY_HT_40_SS_HGI,
|
|
WLAN_RC_PHY_HT_40_DS_HGI,
|
|
WLAN_RC_PHY_MAX
|
|
};
|
|
|
|
#define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \
|
|
|| (_phy == WLAN_RC_PHY_HT_40_DS) \
|
|
|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \
|
|
|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
|
|
#define WLAN_RC_PHY_40(_phy) ((_phy == WLAN_RC_PHY_HT_40_SS) \
|
|
|| (_phy == WLAN_RC_PHY_HT_40_DS) \
|
|
|| (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \
|
|
|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
|
|
#define WLAN_RC_PHY_SGI(_phy) ((_phy == WLAN_RC_PHY_HT_20_SS_HGI) \
|
|
|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \
|
|
|| (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \
|
|
|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
|
|
|
|
#define WLAN_RC_PHY_HT(_phy) (_phy >= WLAN_RC_PHY_HT_20_SS)
|
|
|
|
#define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ? \
|
|
(capflag & WLAN_RC_40_FLAG) ? VALID_40 : VALID_20 : VALID))
|
|
|
|
/* Return TRUE if flag supports HT20 && client supports HT20 or
|
|
* return TRUE if flag supports HT40 && client supports HT40.
|
|
* This is used becos some rates overlap between HT20/HT40.
|
|
*/
|
|
#define WLAN_RC_PHY_HT_VALID(flag, capflag) \
|
|
(((flag & VALID_20) && !(capflag & WLAN_RC_40_FLAG)) || \
|
|
((flag & VALID_40) && (capflag & WLAN_RC_40_FLAG)))
|
|
|
|
#define WLAN_RC_DS_FLAG (0x01)
|
|
#define WLAN_RC_40_FLAG (0x02)
|
|
#define WLAN_RC_SGI_FLAG (0x04)
|
|
#define WLAN_RC_HT_FLAG (0x08)
|
|
|
|
/**
|
|
* struct ath_rate_table - Rate Control table
|
|
* @valid: valid for use in rate control
|
|
* @valid_single_stream: valid for use in rate control for
|
|
* single stream operation
|
|
* @phy: CCK/OFDM
|
|
* @ratekbps: rate in Kbits per second
|
|
* @user_ratekbps: user rate in Kbits per second
|
|
* @ratecode: rate that goes into HW descriptors
|
|
* @short_preamble: Mask for enabling short preamble in ratecode for CCK
|
|
* @dot11rate: value that goes into supported
|
|
* rates info element of MLME
|
|
* @ctrl_rate: Index of next lower basic rate, used for duration computation
|
|
* @max_4ms_framelen: maximum frame length(bytes) for tx duration
|
|
* @probe_interval: interval for rate control to probe for other rates
|
|
* @rssi_reduce_interval: interval for rate control to reduce rssi
|
|
* @initial_ratemax: initial ratemax value
|
|
*/
|
|
struct ath_rate_table {
|
|
int rate_cnt;
|
|
struct {
|
|
int valid;
|
|
int valid_single_stream;
|
|
u8 phy;
|
|
u32 ratekbps;
|
|
u32 user_ratekbps;
|
|
u8 ratecode;
|
|
u8 short_preamble;
|
|
u8 dot11rate;
|
|
u8 ctrl_rate;
|
|
int8_t rssi_ack_validmin;
|
|
int8_t rssi_ack_deltamin;
|
|
u8 base_index;
|
|
u8 cw40index;
|
|
u8 sgi_index;
|
|
u8 ht_index;
|
|
u32 max_4ms_framelen;
|
|
u16 lpAckDuration;
|
|
u16 spAckDuration;
|
|
} info[RATE_TABLE_SIZE];
|
|
u32 probe_interval;
|
|
u32 rssi_reduce_interval;
|
|
u8 initial_ratemax;
|
|
};
|
|
|
|
struct ath_tx_ratectrl_state {
|
|
int8_t rssi_thres; /* required rssi for this rate (dB) */
|
|
u8 per; /* recent estimate of packet error rate (%) */
|
|
};
|
|
|
|
struct ath_rateset {
|
|
u8 rs_nrates;
|
|
u8 rs_rates[ATH_RATE_MAX];
|
|
};
|
|
|
|
/**
|
|
* struct ath_rate_priv - Rate Control priv data
|
|
* @state: RC state
|
|
* @rssi_last: last ACK rssi
|
|
* @rssi_last_lookup: last ACK rssi used for lookup
|
|
* @rssi_last_prev: previous last ACK rssi
|
|
* @rssi_last_prev2: 2nd previous last ACK rssi
|
|
* @rssi_sum_cnt: count of rssi_sum for averaging
|
|
* @rssi_sum_rate: rate that we are averaging
|
|
* @rssi_sum: running sum of rssi for averaging
|
|
* @probe_rate: rate we are probing at
|
|
* @rssi_time: msec timestamp for last ack rssi
|
|
* @rssi_down_time: msec timestamp for last down step
|
|
* @probe_time: msec timestamp for last probe
|
|
* @hw_maxretry_pktcnt: num of packets since we got HW max retry error
|
|
* @max_valid_rate: maximum number of valid rate
|
|
* @per_down_time: msec timestamp for last PER down step
|
|
* @valid_phy_ratecnt: valid rate count
|
|
* @rate_max_phy: phy index for the max rate
|
|
* @probe_interval: interval for ratectrl to probe for other rates
|
|
* @prev_data_rix: rate idx of last data frame
|
|
* @ht_cap: HT capabilities
|
|
* @single_stream: When TRUE, only single TX stream possible
|
|
* @neg_rates: Negotatied rates
|
|
* @neg_ht_rates: Negotiated HT rates
|
|
*/
|
|
struct ath_rate_priv {
|
|
int8_t rssi_last;
|
|
int8_t rssi_last_lookup;
|
|
int8_t rssi_last_prev;
|
|
int8_t rssi_last_prev2;
|
|
int32_t rssi_sum_cnt;
|
|
int32_t rssi_sum_rate;
|
|
int32_t rssi_sum;
|
|
u8 rate_table_size;
|
|
u8 probe_rate;
|
|
u8 hw_maxretry_pktcnt;
|
|
u8 max_valid_rate;
|
|
u8 valid_rate_index[RATE_TABLE_SIZE];
|
|
u8 ht_cap;
|
|
u8 single_stream;
|
|
u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX];
|
|
u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][RATE_TABLE_SIZE];
|
|
u8 rc_phy_mode;
|
|
u8 rate_max_phy;
|
|
u32 rssi_time;
|
|
u32 rssi_down_time;
|
|
u32 probe_time;
|
|
u32 per_down_time;
|
|
u32 probe_interval;
|
|
u32 prev_data_rix;
|
|
u32 tx_triglevel_max;
|
|
struct ath_tx_ratectrl_state state[RATE_TABLE_SIZE];
|
|
struct ath_rateset neg_rates;
|
|
struct ath_rateset neg_ht_rates;
|
|
struct ath_rate_softc *asc;
|
|
};
|
|
|
|
struct ath_tx_info_priv {
|
|
struct ath_tx_status tx;
|
|
int n_frames;
|
|
int n_bad_frames;
|
|
bool update_rc;
|
|
};
|
|
|
|
#define ATH_TX_INFO_PRIV(tx_info) \
|
|
((struct ath_tx_info_priv *)((tx_info)->rate_driver_data[0]))
|
|
|
|
void ath_rate_attach(struct ath_softc *sc);
|
|
u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate);
|
|
int ath_rate_control_register(void);
|
|
void ath_rate_control_unregister(void);
|
|
|
|
#endif /* RC_H */
|