a807a6cc29
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
539 lines
14 KiB
C
539 lines
14 KiB
C
/*
|
|
* tps62360.c -- TI tps62360
|
|
*
|
|
* Driver for processor core supply tps62360, tps62361B, tps62362 and tps62363.
|
|
*
|
|
* Copyright (c) 2012, NVIDIA Corporation.
|
|
*
|
|
* Author: Laxman Dewangan <ldewangan@nvidia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
|
|
* whether express or implied; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
|
|
* 02111-1307, USA
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/tps62360.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* Register definitions */
|
|
#define REG_VSET0 0
|
|
#define REG_VSET1 1
|
|
#define REG_VSET2 2
|
|
#define REG_VSET3 3
|
|
#define REG_CONTROL 4
|
|
#define REG_TEMP 5
|
|
#define REG_RAMPCTRL 6
|
|
#define REG_CHIPID 8
|
|
|
|
#define FORCE_PWM_ENABLE BIT(7)
|
|
|
|
enum chips {TPS62360, TPS62361, TPS62362, TPS62363};
|
|
|
|
#define TPS62360_BASE_VOLTAGE 770000
|
|
#define TPS62360_N_VOLTAGES 64
|
|
|
|
#define TPS62361_BASE_VOLTAGE 500000
|
|
#define TPS62361_N_VOLTAGES 128
|
|
|
|
/* tps 62360 chip information */
|
|
struct tps62360_chip {
|
|
struct device *dev;
|
|
struct regulator_desc desc;
|
|
struct regulator_dev *rdev;
|
|
struct regmap *regmap;
|
|
int vsel0_gpio;
|
|
int vsel1_gpio;
|
|
u8 voltage_reg_mask;
|
|
bool en_internal_pulldn;
|
|
bool en_discharge;
|
|
bool valid_gpios;
|
|
int lru_index[4];
|
|
int curr_vset_vsel[4];
|
|
int curr_vset_id;
|
|
};
|
|
|
|
/*
|
|
* find_voltage_set_register: Find new voltage configuration register
|
|
* (VSET) id.
|
|
* The finding of the new VSET register will be based on the LRU mechanism.
|
|
* Each VSET register will have different voltage configured . This
|
|
* Function will look if any of the VSET register have requested voltage set
|
|
* or not.
|
|
* - If it is already there then it will make that register as most
|
|
* recently used and return as found so that caller need not to set
|
|
* the VSET register but need to set the proper gpios to select this
|
|
* VSET register.
|
|
* - If requested voltage is not found then it will use the least
|
|
* recently mechanism to get new VSET register for new configuration
|
|
* and will return not_found so that caller need to set new VSET
|
|
* register and then gpios (both).
|
|
*/
|
|
static bool find_voltage_set_register(struct tps62360_chip *tps,
|
|
int req_vsel, int *vset_reg_id)
|
|
{
|
|
int i;
|
|
bool found = false;
|
|
int new_vset_reg = tps->lru_index[3];
|
|
int found_index = 3;
|
|
|
|
for (i = 0; i < 4; ++i) {
|
|
if (tps->curr_vset_vsel[tps->lru_index[i]] == req_vsel) {
|
|
new_vset_reg = tps->lru_index[i];
|
|
found_index = i;
|
|
found = true;
|
|
goto update_lru_index;
|
|
}
|
|
}
|
|
|
|
update_lru_index:
|
|
for (i = found_index; i > 0; i--)
|
|
tps->lru_index[i] = tps->lru_index[i - 1];
|
|
|
|
tps->lru_index[0] = new_vset_reg;
|
|
*vset_reg_id = new_vset_reg;
|
|
return found;
|
|
}
|
|
|
|
static int tps62360_dcdc_get_voltage_sel(struct regulator_dev *dev)
|
|
{
|
|
struct tps62360_chip *tps = rdev_get_drvdata(dev);
|
|
int vsel;
|
|
unsigned int data;
|
|
int ret;
|
|
|
|
ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev, "%s(): register %d read failed with err %d\n",
|
|
__func__, REG_VSET0 + tps->curr_vset_id, ret);
|
|
return ret;
|
|
}
|
|
vsel = (int)data & tps->voltage_reg_mask;
|
|
return vsel;
|
|
}
|
|
|
|
static int tps62360_dcdc_set_voltage_sel(struct regulator_dev *dev,
|
|
unsigned selector)
|
|
{
|
|
struct tps62360_chip *tps = rdev_get_drvdata(dev);
|
|
int ret;
|
|
bool found = false;
|
|
int new_vset_id = tps->curr_vset_id;
|
|
|
|
/*
|
|
* If gpios are available to select the VSET register then least
|
|
* recently used register for new configuration.
|
|
*/
|
|
if (tps->valid_gpios)
|
|
found = find_voltage_set_register(tps, selector, &new_vset_id);
|
|
|
|
if (!found) {
|
|
ret = regmap_update_bits(tps->regmap, REG_VSET0 + new_vset_id,
|
|
tps->voltage_reg_mask, selector);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev,
|
|
"%s(): register %d update failed with err %d\n",
|
|
__func__, REG_VSET0 + new_vset_id, ret);
|
|
return ret;
|
|
}
|
|
tps->curr_vset_id = new_vset_id;
|
|
tps->curr_vset_vsel[new_vset_id] = selector;
|
|
}
|
|
|
|
/* Select proper VSET register vio gpios */
|
|
if (tps->valid_gpios) {
|
|
gpio_set_value_cansleep(tps->vsel0_gpio, new_vset_id & 0x1);
|
|
gpio_set_value_cansleep(tps->vsel1_gpio,
|
|
(new_vset_id >> 1) & 0x1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int tps62360_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
struct tps62360_chip *tps = rdev_get_drvdata(rdev);
|
|
int i;
|
|
int val;
|
|
int ret;
|
|
|
|
/* Enable force PWM mode in FAST mode only. */
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
val = FORCE_PWM_ENABLE;
|
|
break;
|
|
|
|
case REGULATOR_MODE_NORMAL:
|
|
val = 0;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!tps->valid_gpios) {
|
|
ret = regmap_update_bits(tps->regmap,
|
|
REG_VSET0 + tps->curr_vset_id, FORCE_PWM_ENABLE, val);
|
|
if (ret < 0)
|
|
dev_err(tps->dev,
|
|
"%s(): register %d update failed with err %d\n",
|
|
__func__, REG_VSET0 + tps->curr_vset_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* If gpios are valid then all register set need to be control */
|
|
for (i = 0; i < 4; ++i) {
|
|
ret = regmap_update_bits(tps->regmap,
|
|
REG_VSET0 + i, FORCE_PWM_ENABLE, val);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev,
|
|
"%s(): register %d update failed with err %d\n",
|
|
__func__, REG_VSET0 + i, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static unsigned int tps62360_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
struct tps62360_chip *tps = rdev_get_drvdata(rdev);
|
|
unsigned int data;
|
|
int ret;
|
|
|
|
ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev, "%s(): register %d read failed with err %d\n",
|
|
__func__, REG_VSET0 + tps->curr_vset_id, ret);
|
|
return ret;
|
|
}
|
|
return (data & FORCE_PWM_ENABLE) ?
|
|
REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static struct regulator_ops tps62360_dcdc_ops = {
|
|
.get_voltage_sel = tps62360_dcdc_get_voltage_sel,
|
|
.set_voltage_sel = tps62360_dcdc_set_voltage_sel,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_mode = tps62360_set_mode,
|
|
.get_mode = tps62360_get_mode,
|
|
};
|
|
|
|
static int tps62360_init_dcdc(struct tps62360_chip *tps,
|
|
struct tps62360_regulator_platform_data *pdata)
|
|
{
|
|
int ret;
|
|
unsigned int ramp_ctrl;
|
|
|
|
/* Initialize internal pull up/down control */
|
|
if (tps->en_internal_pulldn)
|
|
ret = regmap_write(tps->regmap, REG_CONTROL, 0xE0);
|
|
else
|
|
ret = regmap_write(tps->regmap, REG_CONTROL, 0x0);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev,
|
|
"%s(): register %d write failed with err %d\n",
|
|
__func__, REG_CONTROL, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Reset output discharge path to reduce power consumption */
|
|
ret = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), 0);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev,
|
|
"%s(): register %d update failed with err %d\n",
|
|
__func__, REG_RAMPCTRL, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Get ramp value from ramp control register */
|
|
ret = regmap_read(tps->regmap, REG_RAMPCTRL, &ramp_ctrl);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev,
|
|
"%s(): register %d read failed with err %d\n",
|
|
__func__, REG_RAMPCTRL, ret);
|
|
return ret;
|
|
}
|
|
ramp_ctrl = (ramp_ctrl >> 5) & 0x7;
|
|
|
|
/* ramp mV/us = 32/(2^ramp_ctrl) */
|
|
tps->desc.ramp_delay = DIV_ROUND_UP(32000, BIT(ramp_ctrl));
|
|
return ret;
|
|
}
|
|
|
|
static const struct regmap_config tps62360_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = REG_CHIPID,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static struct tps62360_regulator_platform_data *
|
|
of_get_tps62360_platform_data(struct device *dev,
|
|
const struct regulator_desc *desc)
|
|
{
|
|
struct tps62360_regulator_platform_data *pdata;
|
|
struct device_node *np = dev->of_node;
|
|
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return NULL;
|
|
|
|
pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node,
|
|
desc);
|
|
if (!pdata->reg_init_data) {
|
|
dev_err(dev, "Not able to get OF regulator init data\n");
|
|
return NULL;
|
|
}
|
|
|
|
pdata->vsel0_gpio = of_get_named_gpio(np, "vsel0-gpio", 0);
|
|
pdata->vsel1_gpio = of_get_named_gpio(np, "vsel1-gpio", 0);
|
|
|
|
if (of_find_property(np, "ti,vsel0-state-high", NULL))
|
|
pdata->vsel0_def_state = 1;
|
|
|
|
if (of_find_property(np, "ti,vsel1-state-high", NULL))
|
|
pdata->vsel1_def_state = 1;
|
|
|
|
if (of_find_property(np, "ti,enable-pull-down", NULL))
|
|
pdata->en_internal_pulldn = true;
|
|
|
|
if (of_find_property(np, "ti,enable-vout-discharge", NULL))
|
|
pdata->en_discharge = true;
|
|
|
|
return pdata;
|
|
}
|
|
|
|
#if defined(CONFIG_OF)
|
|
static const struct of_device_id tps62360_of_match[] = {
|
|
{ .compatible = "ti,tps62360", .data = (void *)TPS62360},
|
|
{ .compatible = "ti,tps62361", .data = (void *)TPS62361},
|
|
{ .compatible = "ti,tps62362", .data = (void *)TPS62362},
|
|
{ .compatible = "ti,tps62363", .data = (void *)TPS62363},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tps62360_of_match);
|
|
#endif
|
|
|
|
static int tps62360_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct regulator_config config = { };
|
|
struct tps62360_regulator_platform_data *pdata;
|
|
struct regulator_dev *rdev;
|
|
struct tps62360_chip *tps;
|
|
int ret;
|
|
int i;
|
|
int chip_id;
|
|
|
|
pdata = dev_get_platdata(&client->dev);
|
|
|
|
tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
|
|
if (!tps)
|
|
return -ENOMEM;
|
|
|
|
tps->desc.name = client->name;
|
|
tps->desc.id = 0;
|
|
tps->desc.ops = &tps62360_dcdc_ops;
|
|
tps->desc.type = REGULATOR_VOLTAGE;
|
|
tps->desc.owner = THIS_MODULE;
|
|
tps->desc.uV_step = 10000;
|
|
|
|
if (client->dev.of_node) {
|
|
const struct of_device_id *match;
|
|
match = of_match_device(of_match_ptr(tps62360_of_match),
|
|
&client->dev);
|
|
if (!match) {
|
|
dev_err(&client->dev, "Error: No device match found\n");
|
|
return -ENODEV;
|
|
}
|
|
chip_id = (int)(long)match->data;
|
|
if (!pdata)
|
|
pdata = of_get_tps62360_platform_data(&client->dev,
|
|
&tps->desc);
|
|
} else if (id) {
|
|
chip_id = id->driver_data;
|
|
} else {
|
|
dev_err(&client->dev, "No device tree match or id table match found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!pdata) {
|
|
dev_err(&client->dev, "%s(): Platform data not found\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
tps->en_discharge = pdata->en_discharge;
|
|
tps->en_internal_pulldn = pdata->en_internal_pulldn;
|
|
tps->vsel0_gpio = pdata->vsel0_gpio;
|
|
tps->vsel1_gpio = pdata->vsel1_gpio;
|
|
tps->dev = &client->dev;
|
|
|
|
switch (chip_id) {
|
|
case TPS62360:
|
|
case TPS62362:
|
|
tps->desc.min_uV = TPS62360_BASE_VOLTAGE;
|
|
tps->voltage_reg_mask = 0x3F;
|
|
tps->desc.n_voltages = TPS62360_N_VOLTAGES;
|
|
break;
|
|
case TPS62361:
|
|
case TPS62363:
|
|
tps->desc.min_uV = TPS62361_BASE_VOLTAGE;
|
|
tps->voltage_reg_mask = 0x7F;
|
|
tps->desc.n_voltages = TPS62361_N_VOLTAGES;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config);
|
|
if (IS_ERR(tps->regmap)) {
|
|
ret = PTR_ERR(tps->regmap);
|
|
dev_err(&client->dev,
|
|
"%s(): regmap allocation failed with err %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
i2c_set_clientdata(client, tps);
|
|
|
|
tps->curr_vset_id = (pdata->vsel1_def_state & 1) * 2 +
|
|
(pdata->vsel0_def_state & 1);
|
|
tps->lru_index[0] = tps->curr_vset_id;
|
|
tps->valid_gpios = false;
|
|
|
|
if (gpio_is_valid(tps->vsel0_gpio) && gpio_is_valid(tps->vsel1_gpio)) {
|
|
int gpio_flags;
|
|
gpio_flags = (pdata->vsel0_def_state) ?
|
|
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
|
|
ret = devm_gpio_request_one(&client->dev, tps->vsel0_gpio,
|
|
gpio_flags, "tps62360-vsel0");
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"%s(): Could not obtain vsel0 GPIO %d: %d\n",
|
|
__func__, tps->vsel0_gpio, ret);
|
|
return ret;
|
|
}
|
|
|
|
gpio_flags = (pdata->vsel1_def_state) ?
|
|
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
|
|
ret = devm_gpio_request_one(&client->dev, tps->vsel1_gpio,
|
|
gpio_flags, "tps62360-vsel1");
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"%s(): Could not obtain vsel1 GPIO %d: %d\n",
|
|
__func__, tps->vsel1_gpio, ret);
|
|
return ret;
|
|
}
|
|
tps->valid_gpios = true;
|
|
|
|
/*
|
|
* Initialize the lru index with vset_reg id
|
|
* The index 0 will be most recently used and
|
|
* set with the tps->curr_vset_id */
|
|
for (i = 0; i < 4; ++i)
|
|
tps->lru_index[i] = i;
|
|
tps->lru_index[0] = tps->curr_vset_id;
|
|
tps->lru_index[tps->curr_vset_id] = 0;
|
|
}
|
|
|
|
ret = tps62360_init_dcdc(tps, pdata);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev, "%s(): Init failed with err = %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
config.dev = &client->dev;
|
|
config.init_data = pdata->reg_init_data;
|
|
config.driver_data = tps;
|
|
config.of_node = client->dev.of_node;
|
|
|
|
/* Register the regulators */
|
|
rdev = devm_regulator_register(&client->dev, &tps->desc, &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(tps->dev,
|
|
"%s(): regulator register failed with err %s\n",
|
|
__func__, id->name);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
|
|
tps->rdev = rdev;
|
|
return 0;
|
|
}
|
|
|
|
static void tps62360_shutdown(struct i2c_client *client)
|
|
{
|
|
struct tps62360_chip *tps = i2c_get_clientdata(client);
|
|
int st;
|
|
|
|
if (!tps->en_discharge)
|
|
return;
|
|
|
|
/* Configure the output discharge path */
|
|
st = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), BIT(2));
|
|
if (st < 0)
|
|
dev_err(tps->dev,
|
|
"%s(): register %d update failed with err %d\n",
|
|
__func__, REG_RAMPCTRL, st);
|
|
}
|
|
|
|
static const struct i2c_device_id tps62360_id[] = {
|
|
{.name = "tps62360", .driver_data = TPS62360},
|
|
{.name = "tps62361", .driver_data = TPS62361},
|
|
{.name = "tps62362", .driver_data = TPS62362},
|
|
{.name = "tps62363", .driver_data = TPS62363},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, tps62360_id);
|
|
|
|
static struct i2c_driver tps62360_i2c_driver = {
|
|
.driver = {
|
|
.name = "tps62360",
|
|
.of_match_table = of_match_ptr(tps62360_of_match),
|
|
},
|
|
.probe = tps62360_probe,
|
|
.shutdown = tps62360_shutdown,
|
|
.id_table = tps62360_id,
|
|
};
|
|
|
|
static int __init tps62360_init(void)
|
|
{
|
|
return i2c_add_driver(&tps62360_i2c_driver);
|
|
}
|
|
subsys_initcall(tps62360_init);
|
|
|
|
static void __exit tps62360_cleanup(void)
|
|
{
|
|
i2c_del_driver(&tps62360_i2c_driver);
|
|
}
|
|
module_exit(tps62360_cleanup);
|
|
|
|
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
|
|
MODULE_DESCRIPTION("TPS6236x voltage regulator driver");
|
|
MODULE_LICENSE("GPL v2");
|