042451b921
commit 16da0eb5ab6ef2dd1d33431199126e63db9997cc upstream.
On S2MPS11 device, the buck7 and buck8 regulator voltages start at 750
mV, not 600 mV. Using wrong minimal value caused shifting of these
regulator values by 150 mV (e.g. buck7 usually configured to v1.35 V was
reported as 1.2 V).
On most of the boards these regulators are left in default state so this
was only affecting reported voltage. However if any driver wanted to
change them, then effectively it would set voltage 150 mV higher than
intended.
Cc: <stable@vger.kernel.org>
Fixes: cb74685ecb ("regulator: s2mps11: Add samsung s2mps11 regulator driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1233 lines
41 KiB
C
1233 lines
41 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Copyright (c) 2012-2014 Samsung Electronics Co., Ltd
|
|
// http://www.samsung.com
|
|
|
|
#include <linux/bug.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/mfd/samsung/core.h>
|
|
#include <linux/mfd/samsung/s2mps11.h>
|
|
#include <linux/mfd/samsung/s2mps13.h>
|
|
#include <linux/mfd/samsung/s2mps14.h>
|
|
#include <linux/mfd/samsung/s2mps15.h>
|
|
#include <linux/mfd/samsung/s2mpu02.h>
|
|
|
|
/* The highest number of possible regulators for supported devices. */
|
|
#define S2MPS_REGULATOR_MAX S2MPS13_REGULATOR_MAX
|
|
struct s2mps11_info {
|
|
int ramp_delay2;
|
|
int ramp_delay34;
|
|
int ramp_delay5;
|
|
int ramp_delay16;
|
|
int ramp_delay7810;
|
|
int ramp_delay9;
|
|
|
|
enum sec_device_type dev_type;
|
|
|
|
/*
|
|
* One bit for each S2MPS13/S2MPS14/S2MPU02 regulator whether
|
|
* the suspend mode was enabled.
|
|
*/
|
|
DECLARE_BITMAP(suspend_state, S2MPS_REGULATOR_MAX);
|
|
|
|
/*
|
|
* Array (size: number of regulators) with GPIO-s for external
|
|
* sleep control.
|
|
*/
|
|
int *ext_control_gpio;
|
|
};
|
|
|
|
static int get_ramp_delay(int ramp_delay)
|
|
{
|
|
unsigned char cnt = 0;
|
|
|
|
ramp_delay /= 6250;
|
|
|
|
while (true) {
|
|
ramp_delay = ramp_delay >> 1;
|
|
if (ramp_delay == 0)
|
|
break;
|
|
cnt++;
|
|
}
|
|
|
|
if (cnt > 3)
|
|
cnt = 3;
|
|
|
|
return cnt;
|
|
}
|
|
|
|
static int s2mps11_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
|
|
unsigned int old_selector,
|
|
unsigned int new_selector)
|
|
{
|
|
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
|
|
unsigned int ramp_delay = 0;
|
|
int old_volt, new_volt;
|
|
|
|
switch (rdev_get_id(rdev)) {
|
|
case S2MPS11_BUCK2:
|
|
ramp_delay = s2mps11->ramp_delay2;
|
|
break;
|
|
case S2MPS11_BUCK3:
|
|
case S2MPS11_BUCK4:
|
|
ramp_delay = s2mps11->ramp_delay34;
|
|
break;
|
|
case S2MPS11_BUCK5:
|
|
ramp_delay = s2mps11->ramp_delay5;
|
|
break;
|
|
case S2MPS11_BUCK6:
|
|
case S2MPS11_BUCK1:
|
|
ramp_delay = s2mps11->ramp_delay16;
|
|
break;
|
|
case S2MPS11_BUCK7:
|
|
case S2MPS11_BUCK8:
|
|
case S2MPS11_BUCK10:
|
|
ramp_delay = s2mps11->ramp_delay7810;
|
|
break;
|
|
case S2MPS11_BUCK9:
|
|
ramp_delay = s2mps11->ramp_delay9;
|
|
}
|
|
|
|
if (ramp_delay == 0)
|
|
ramp_delay = rdev->desc->ramp_delay;
|
|
|
|
old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
|
|
new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
|
|
|
|
return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
|
|
}
|
|
|
|
static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
|
{
|
|
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
|
|
unsigned int ramp_val, ramp_shift, ramp_reg = S2MPS11_REG_RAMP_BUCK;
|
|
unsigned int ramp_enable = 1, enable_shift = 0;
|
|
int ret;
|
|
|
|
switch (rdev_get_id(rdev)) {
|
|
case S2MPS11_BUCK1:
|
|
if (ramp_delay > s2mps11->ramp_delay16)
|
|
s2mps11->ramp_delay16 = ramp_delay;
|
|
else
|
|
ramp_delay = s2mps11->ramp_delay16;
|
|
|
|
ramp_shift = S2MPS11_BUCK16_RAMP_SHIFT;
|
|
break;
|
|
case S2MPS11_BUCK2:
|
|
enable_shift = S2MPS11_BUCK2_RAMP_EN_SHIFT;
|
|
if (!ramp_delay) {
|
|
ramp_enable = 0;
|
|
break;
|
|
}
|
|
|
|
s2mps11->ramp_delay2 = ramp_delay;
|
|
ramp_shift = S2MPS11_BUCK2_RAMP_SHIFT;
|
|
ramp_reg = S2MPS11_REG_RAMP;
|
|
break;
|
|
case S2MPS11_BUCK3:
|
|
enable_shift = S2MPS11_BUCK3_RAMP_EN_SHIFT;
|
|
if (!ramp_delay) {
|
|
ramp_enable = 0;
|
|
break;
|
|
}
|
|
|
|
if (ramp_delay > s2mps11->ramp_delay34)
|
|
s2mps11->ramp_delay34 = ramp_delay;
|
|
else
|
|
ramp_delay = s2mps11->ramp_delay34;
|
|
|
|
ramp_shift = S2MPS11_BUCK34_RAMP_SHIFT;
|
|
ramp_reg = S2MPS11_REG_RAMP;
|
|
break;
|
|
case S2MPS11_BUCK4:
|
|
enable_shift = S2MPS11_BUCK4_RAMP_EN_SHIFT;
|
|
if (!ramp_delay) {
|
|
ramp_enable = 0;
|
|
break;
|
|
}
|
|
|
|
if (ramp_delay > s2mps11->ramp_delay34)
|
|
s2mps11->ramp_delay34 = ramp_delay;
|
|
else
|
|
ramp_delay = s2mps11->ramp_delay34;
|
|
|
|
ramp_shift = S2MPS11_BUCK34_RAMP_SHIFT;
|
|
ramp_reg = S2MPS11_REG_RAMP;
|
|
break;
|
|
case S2MPS11_BUCK5:
|
|
s2mps11->ramp_delay5 = ramp_delay;
|
|
ramp_shift = S2MPS11_BUCK5_RAMP_SHIFT;
|
|
break;
|
|
case S2MPS11_BUCK6:
|
|
enable_shift = S2MPS11_BUCK6_RAMP_EN_SHIFT;
|
|
if (!ramp_delay) {
|
|
ramp_enable = 0;
|
|
break;
|
|
}
|
|
|
|
if (ramp_delay > s2mps11->ramp_delay16)
|
|
s2mps11->ramp_delay16 = ramp_delay;
|
|
else
|
|
ramp_delay = s2mps11->ramp_delay16;
|
|
|
|
ramp_shift = S2MPS11_BUCK16_RAMP_SHIFT;
|
|
break;
|
|
case S2MPS11_BUCK7:
|
|
case S2MPS11_BUCK8:
|
|
case S2MPS11_BUCK10:
|
|
if (ramp_delay > s2mps11->ramp_delay7810)
|
|
s2mps11->ramp_delay7810 = ramp_delay;
|
|
else
|
|
ramp_delay = s2mps11->ramp_delay7810;
|
|
|
|
ramp_shift = S2MPS11_BUCK7810_RAMP_SHIFT;
|
|
break;
|
|
case S2MPS11_BUCK9:
|
|
s2mps11->ramp_delay9 = ramp_delay;
|
|
ramp_shift = S2MPS11_BUCK9_RAMP_SHIFT;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
if (!ramp_enable)
|
|
goto ramp_disable;
|
|
|
|
/* Ramp delay can be enabled/disabled only for buck[2346] */
|
|
if ((rdev_get_id(rdev) >= S2MPS11_BUCK2 &&
|
|
rdev_get_id(rdev) <= S2MPS11_BUCK4) ||
|
|
rdev_get_id(rdev) == S2MPS11_BUCK6) {
|
|
ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
|
|
1 << enable_shift, 1 << enable_shift);
|
|
if (ret) {
|
|
dev_err(&rdev->dev, "failed to enable ramp rate\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ramp_val = get_ramp_delay(ramp_delay);
|
|
|
|
return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
|
|
ramp_val << ramp_shift);
|
|
|
|
ramp_disable:
|
|
return regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
|
|
1 << enable_shift, 0);
|
|
}
|
|
|
|
static const struct regulator_ops s2mps11_ldo_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
};
|
|
|
|
static const struct regulator_ops s2mps11_buck_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = s2mps11_regulator_set_voltage_time_sel,
|
|
.set_ramp_delay = s2mps11_set_ramp_delay,
|
|
};
|
|
|
|
#define regulator_desc_s2mps11_ldo(num, step) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPS11_LDO##num, \
|
|
.ops = &s2mps11_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.ramp_delay = RAMP_DELAY_12_MVUS, \
|
|
.min_uV = MIN_800_MV, \
|
|
.uV_step = step, \
|
|
.n_voltages = S2MPS11_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPS11_REG_L1CTRL + num - 1, \
|
|
.vsel_mask = S2MPS11_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPS11_REG_L1CTRL + num - 1, \
|
|
.enable_mask = S2MPS11_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps11_buck1_4(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPS11_BUCK##num, \
|
|
.ops = &s2mps11_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = MIN_600_MV, \
|
|
.uV_step = STEP_6_25_MV, \
|
|
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
|
|
.ramp_delay = S2MPS11_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS11_REG_B1CTRL2 + (num - 1) * 2, \
|
|
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS11_REG_B1CTRL1 + (num - 1) * 2, \
|
|
.enable_mask = S2MPS11_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps11_buck5 { \
|
|
.name = "BUCK5", \
|
|
.id = S2MPS11_BUCK5, \
|
|
.ops = &s2mps11_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = MIN_600_MV, \
|
|
.uV_step = STEP_6_25_MV, \
|
|
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
|
|
.ramp_delay = S2MPS11_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS11_REG_B5CTRL2, \
|
|
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS11_REG_B5CTRL1, \
|
|
.enable_mask = S2MPS11_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps11_buck67810(num, min, step) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPS11_BUCK##num, \
|
|
.ops = &s2mps11_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = min, \
|
|
.uV_step = step, \
|
|
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
|
|
.ramp_delay = S2MPS11_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS11_REG_B6CTRL2 + (num - 6) * 2, \
|
|
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS11_REG_B6CTRL1 + (num - 6) * 2, \
|
|
.enable_mask = S2MPS11_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps11_buck9 { \
|
|
.name = "BUCK9", \
|
|
.id = S2MPS11_BUCK9, \
|
|
.ops = &s2mps11_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = MIN_3000_MV, \
|
|
.uV_step = STEP_25_MV, \
|
|
.n_voltages = S2MPS11_BUCK9_N_VOLTAGES, \
|
|
.ramp_delay = S2MPS11_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS11_REG_B9CTRL2, \
|
|
.vsel_mask = S2MPS11_BUCK9_VSEL_MASK, \
|
|
.enable_reg = S2MPS11_REG_B9CTRL1, \
|
|
.enable_mask = S2MPS11_ENABLE_MASK \
|
|
}
|
|
|
|
static const struct regulator_desc s2mps11_regulators[] = {
|
|
regulator_desc_s2mps11_ldo(1, STEP_25_MV),
|
|
regulator_desc_s2mps11_ldo(2, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(3, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(4, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(5, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(6, STEP_25_MV),
|
|
regulator_desc_s2mps11_ldo(7, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(8, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(9, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(10, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(11, STEP_25_MV),
|
|
regulator_desc_s2mps11_ldo(12, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(13, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(14, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(15, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(16, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(17, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(18, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(19, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(20, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(21, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(22, STEP_25_MV),
|
|
regulator_desc_s2mps11_ldo(23, STEP_25_MV),
|
|
regulator_desc_s2mps11_ldo(24, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(25, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(26, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(27, STEP_25_MV),
|
|
regulator_desc_s2mps11_ldo(28, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(29, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(30, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(31, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(32, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(33, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(34, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(35, STEP_25_MV),
|
|
regulator_desc_s2mps11_ldo(36, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(37, STEP_50_MV),
|
|
regulator_desc_s2mps11_ldo(38, STEP_50_MV),
|
|
regulator_desc_s2mps11_buck1_4(1),
|
|
regulator_desc_s2mps11_buck1_4(2),
|
|
regulator_desc_s2mps11_buck1_4(3),
|
|
regulator_desc_s2mps11_buck1_4(4),
|
|
regulator_desc_s2mps11_buck5,
|
|
regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV),
|
|
regulator_desc_s2mps11_buck67810(7, MIN_750_MV, STEP_12_5_MV),
|
|
regulator_desc_s2mps11_buck67810(8, MIN_750_MV, STEP_12_5_MV),
|
|
regulator_desc_s2mps11_buck9,
|
|
regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV),
|
|
};
|
|
|
|
static const struct regulator_ops s2mps14_reg_ops;
|
|
|
|
#define regulator_desc_s2mps13_ldo(num, min, step, min_sel) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPS13_LDO##num, \
|
|
.ops = &s2mps14_reg_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = min, \
|
|
.uV_step = step, \
|
|
.linear_min_sel = min_sel, \
|
|
.n_voltages = S2MPS14_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPS13_REG_L1CTRL + num - 1, \
|
|
.vsel_mask = S2MPS14_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPS13_REG_L1CTRL + num - 1, \
|
|
.enable_mask = S2MPS14_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps13_buck(num, min, step, min_sel) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPS13_BUCK##num, \
|
|
.ops = &s2mps14_reg_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = min, \
|
|
.uV_step = step, \
|
|
.linear_min_sel = min_sel, \
|
|
.n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
|
|
.ramp_delay = S2MPS13_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS13_REG_B1OUT + (num - 1) * 2, \
|
|
.vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS13_REG_B1CTRL + (num - 1) * 2, \
|
|
.enable_mask = S2MPS14_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps13_buck7(num, min, step, min_sel) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPS13_BUCK##num, \
|
|
.ops = &s2mps14_reg_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = min, \
|
|
.uV_step = step, \
|
|
.linear_min_sel = min_sel, \
|
|
.n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
|
|
.ramp_delay = S2MPS13_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS13_REG_B1OUT + (num) * 2 - 1, \
|
|
.vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS13_REG_B1CTRL + (num - 1) * 2, \
|
|
.enable_mask = S2MPS14_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps13_buck8_10(num, min, step, min_sel) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPS13_BUCK##num, \
|
|
.ops = &s2mps14_reg_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = min, \
|
|
.uV_step = step, \
|
|
.linear_min_sel = min_sel, \
|
|
.n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
|
|
.ramp_delay = S2MPS13_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS13_REG_B1OUT + (num) * 2 - 1, \
|
|
.vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS13_REG_B1CTRL + (num) * 2 - 1, \
|
|
.enable_mask = S2MPS14_ENABLE_MASK \
|
|
}
|
|
|
|
static const struct regulator_desc s2mps13_regulators[] = {
|
|
regulator_desc_s2mps13_ldo(1, MIN_800_MV, STEP_12_5_MV, 0x00),
|
|
regulator_desc_s2mps13_ldo(2, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(3, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(4, MIN_800_MV, STEP_12_5_MV, 0x00),
|
|
regulator_desc_s2mps13_ldo(5, MIN_800_MV, STEP_12_5_MV, 0x00),
|
|
regulator_desc_s2mps13_ldo(6, MIN_800_MV, STEP_12_5_MV, 0x00),
|
|
regulator_desc_s2mps13_ldo(7, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(8, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(9, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(10, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(11, MIN_800_MV, STEP_25_MV, 0x10),
|
|
regulator_desc_s2mps13_ldo(12, MIN_800_MV, STEP_25_MV, 0x10),
|
|
regulator_desc_s2mps13_ldo(13, MIN_800_MV, STEP_25_MV, 0x10),
|
|
regulator_desc_s2mps13_ldo(14, MIN_800_MV, STEP_12_5_MV, 0x00),
|
|
regulator_desc_s2mps13_ldo(15, MIN_800_MV, STEP_12_5_MV, 0x00),
|
|
regulator_desc_s2mps13_ldo(16, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(17, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(18, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(19, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(20, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(21, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(22, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(23, MIN_800_MV, STEP_12_5_MV, 0x00),
|
|
regulator_desc_s2mps13_ldo(24, MIN_800_MV, STEP_12_5_MV, 0x00),
|
|
regulator_desc_s2mps13_ldo(25, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(26, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(27, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(28, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(29, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(30, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(31, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(32, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(33, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(34, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(35, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(36, MIN_800_MV, STEP_12_5_MV, 0x00),
|
|
regulator_desc_s2mps13_ldo(37, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(38, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_ldo(39, MIN_1000_MV, STEP_25_MV, 0x08),
|
|
regulator_desc_s2mps13_ldo(40, MIN_1400_MV, STEP_50_MV, 0x0C),
|
|
regulator_desc_s2mps13_buck(1, MIN_500_MV, STEP_6_25_MV, 0x10),
|
|
regulator_desc_s2mps13_buck(2, MIN_500_MV, STEP_6_25_MV, 0x10),
|
|
regulator_desc_s2mps13_buck(3, MIN_500_MV, STEP_6_25_MV, 0x10),
|
|
regulator_desc_s2mps13_buck(4, MIN_500_MV, STEP_6_25_MV, 0x10),
|
|
regulator_desc_s2mps13_buck(5, MIN_500_MV, STEP_6_25_MV, 0x10),
|
|
regulator_desc_s2mps13_buck(6, MIN_500_MV, STEP_6_25_MV, 0x10),
|
|
regulator_desc_s2mps13_buck7(7, MIN_500_MV, STEP_6_25_MV, 0x10),
|
|
regulator_desc_s2mps13_buck8_10(8, MIN_1000_MV, STEP_12_5_MV, 0x20),
|
|
regulator_desc_s2mps13_buck8_10(9, MIN_1000_MV, STEP_12_5_MV, 0x20),
|
|
regulator_desc_s2mps13_buck8_10(10, MIN_500_MV, STEP_6_25_MV, 0x10),
|
|
};
|
|
|
|
static int s2mps14_regulator_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
|
|
unsigned int val;
|
|
|
|
switch (s2mps11->dev_type) {
|
|
case S2MPS13X:
|
|
case S2MPS14X:
|
|
if (test_bit(rdev_get_id(rdev), s2mps11->suspend_state))
|
|
val = S2MPS14_ENABLE_SUSPEND;
|
|
else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
|
|
val = S2MPS14_ENABLE_EXT_CONTROL;
|
|
else
|
|
val = rdev->desc->enable_mask;
|
|
break;
|
|
case S2MPU02:
|
|
if (test_bit(rdev_get_id(rdev), s2mps11->suspend_state))
|
|
val = S2MPU02_ENABLE_SUSPEND;
|
|
else
|
|
val = rdev->desc->enable_mask;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask, val);
|
|
}
|
|
|
|
static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
unsigned int val, state;
|
|
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
|
|
int rdev_id = rdev_get_id(rdev);
|
|
|
|
/* Below LDO should be always on or does not support suspend mode. */
|
|
switch (s2mps11->dev_type) {
|
|
case S2MPS13X:
|
|
case S2MPS14X:
|
|
switch (rdev_id) {
|
|
case S2MPS14_LDO3:
|
|
return 0;
|
|
default:
|
|
state = S2MPS14_ENABLE_SUSPEND;
|
|
break;
|
|
}
|
|
break;
|
|
case S2MPU02:
|
|
switch (rdev_id) {
|
|
case S2MPU02_LDO13:
|
|
case S2MPU02_LDO14:
|
|
case S2MPU02_LDO15:
|
|
case S2MPU02_LDO17:
|
|
case S2MPU02_BUCK7:
|
|
state = S2MPU02_DISABLE_SUSPEND;
|
|
break;
|
|
default:
|
|
state = S2MPU02_ENABLE_SUSPEND;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
set_bit(rdev_get_id(rdev), s2mps11->suspend_state);
|
|
/*
|
|
* Don't enable suspend mode if regulator is already disabled because
|
|
* this would effectively for a short time turn on the regulator after
|
|
* resuming.
|
|
* However we still want to toggle the suspend_state bit for regulator
|
|
* in case if it got enabled before suspending the system.
|
|
*/
|
|
if (!(val & rdev->desc->enable_mask))
|
|
return 0;
|
|
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask, state);
|
|
}
|
|
|
|
static const struct regulator_ops s2mps14_reg_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = s2mps14_regulator_enable,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_suspend_disable = s2mps14_regulator_set_suspend_disable,
|
|
};
|
|
|
|
#define regulator_desc_s2mps14_ldo(num, min, step) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPS14_LDO##num, \
|
|
.ops = &s2mps14_reg_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = min, \
|
|
.uV_step = step, \
|
|
.n_voltages = S2MPS14_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \
|
|
.vsel_mask = S2MPS14_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPS14_REG_L1CTRL + num - 1, \
|
|
.enable_mask = S2MPS14_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps14_buck(num, min, step, min_sel) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPS14_BUCK##num, \
|
|
.ops = &s2mps14_reg_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = min, \
|
|
.uV_step = step, \
|
|
.n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
|
|
.linear_min_sel = min_sel, \
|
|
.ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS14_REG_B1CTRL2 + (num - 1) * 2, \
|
|
.vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS14_REG_B1CTRL1 + (num - 1) * 2, \
|
|
.enable_mask = S2MPS14_ENABLE_MASK \
|
|
}
|
|
|
|
static const struct regulator_desc s2mps14_regulators[] = {
|
|
regulator_desc_s2mps14_ldo(1, MIN_800_MV, STEP_12_5_MV),
|
|
regulator_desc_s2mps14_ldo(2, MIN_800_MV, STEP_12_5_MV),
|
|
regulator_desc_s2mps14_ldo(3, MIN_800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(4, MIN_800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(5, MIN_800_MV, STEP_12_5_MV),
|
|
regulator_desc_s2mps14_ldo(6, MIN_800_MV, STEP_12_5_MV),
|
|
regulator_desc_s2mps14_ldo(7, MIN_800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(8, MIN_1800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(9, MIN_800_MV, STEP_12_5_MV),
|
|
regulator_desc_s2mps14_ldo(10, MIN_800_MV, STEP_12_5_MV),
|
|
regulator_desc_s2mps14_ldo(11, MIN_800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(12, MIN_1800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(13, MIN_1800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(14, MIN_1800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(15, MIN_1800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(16, MIN_1800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(17, MIN_1800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(18, MIN_1800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(19, MIN_800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(20, MIN_800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(21, MIN_800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(22, MIN_800_MV, STEP_12_5_MV),
|
|
regulator_desc_s2mps14_ldo(23, MIN_800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(24, MIN_1800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_ldo(25, MIN_1800_MV, STEP_25_MV),
|
|
regulator_desc_s2mps14_buck(1, MIN_600_MV, STEP_6_25_MV,
|
|
S2MPS14_BUCK1235_START_SEL),
|
|
regulator_desc_s2mps14_buck(2, MIN_600_MV, STEP_6_25_MV,
|
|
S2MPS14_BUCK1235_START_SEL),
|
|
regulator_desc_s2mps14_buck(3, MIN_600_MV, STEP_6_25_MV,
|
|
S2MPS14_BUCK1235_START_SEL),
|
|
regulator_desc_s2mps14_buck(4, MIN_1400_MV, STEP_12_5_MV,
|
|
S2MPS14_BUCK4_START_SEL),
|
|
regulator_desc_s2mps14_buck(5, MIN_600_MV, STEP_6_25_MV,
|
|
S2MPS14_BUCK1235_START_SEL),
|
|
};
|
|
|
|
static const struct regulator_ops s2mps15_reg_ldo_ops = {
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
};
|
|
|
|
static const struct regulator_ops s2mps15_reg_buck_ops = {
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
};
|
|
|
|
#define regulator_desc_s2mps15_ldo(num, range) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPS15_LDO##num, \
|
|
.ops = &s2mps15_reg_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.linear_ranges = range, \
|
|
.n_linear_ranges = ARRAY_SIZE(range), \
|
|
.n_voltages = S2MPS15_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPS15_REG_L1CTRL + num - 1, \
|
|
.vsel_mask = S2MPS15_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPS15_REG_L1CTRL + num - 1, \
|
|
.enable_mask = S2MPS15_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps15_buck(num, range) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPS15_BUCK##num, \
|
|
.ops = &s2mps15_reg_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.linear_ranges = range, \
|
|
.n_linear_ranges = ARRAY_SIZE(range), \
|
|
.ramp_delay = 12500, \
|
|
.n_voltages = S2MPS15_BUCK_N_VOLTAGES, \
|
|
.vsel_reg = S2MPS15_REG_B1CTRL2 + ((num - 1) * 2), \
|
|
.vsel_mask = S2MPS15_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS15_REG_B1CTRL1 + ((num - 1) * 2), \
|
|
.enable_mask = S2MPS15_ENABLE_MASK \
|
|
}
|
|
|
|
/* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */
|
|
static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = {
|
|
REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000),
|
|
};
|
|
|
|
/* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */
|
|
static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = {
|
|
REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000),
|
|
};
|
|
|
|
/* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */
|
|
static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
|
|
REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500),
|
|
};
|
|
|
|
/* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
|
|
static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
|
|
REGULATOR_LINEAR_RANGE(700000, 0x10, 0x20, 25000),
|
|
};
|
|
|
|
/* voltage range for s2mps15 LDO 1 */
|
|
static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
|
|
REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500),
|
|
};
|
|
|
|
/* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
|
|
static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
|
|
REGULATOR_LINEAR_RANGE(500000, 0x20, 0xc0, 6250),
|
|
};
|
|
|
|
/* voltage range for s2mps15 BUCK 8, 9 and 10 */
|
|
static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
|
|
REGULATOR_LINEAR_RANGE(1000000, 0x20, 0x78, 12500),
|
|
};
|
|
|
|
static const struct regulator_desc s2mps15_regulators[] = {
|
|
regulator_desc_s2mps15_ldo(1, s2mps15_ldo_voltage_ranges5),
|
|
regulator_desc_s2mps15_ldo(2, s2mps15_ldo_voltage_ranges2),
|
|
regulator_desc_s2mps15_ldo(3, s2mps15_ldo_voltage_ranges1),
|
|
regulator_desc_s2mps15_ldo(4, s2mps15_ldo_voltage_ranges3),
|
|
regulator_desc_s2mps15_ldo(5, s2mps15_ldo_voltage_ranges1),
|
|
regulator_desc_s2mps15_ldo(6, s2mps15_ldo_voltage_ranges2),
|
|
regulator_desc_s2mps15_ldo(7, s2mps15_ldo_voltage_ranges4),
|
|
regulator_desc_s2mps15_ldo(8, s2mps15_ldo_voltage_ranges4),
|
|
regulator_desc_s2mps15_ldo(9, s2mps15_ldo_voltage_ranges4),
|
|
regulator_desc_s2mps15_ldo(10, s2mps15_ldo_voltage_ranges4),
|
|
regulator_desc_s2mps15_ldo(11, s2mps15_ldo_voltage_ranges3),
|
|
regulator_desc_s2mps15_ldo(12, s2mps15_ldo_voltage_ranges3),
|
|
regulator_desc_s2mps15_ldo(13, s2mps15_ldo_voltage_ranges3),
|
|
regulator_desc_s2mps15_ldo(14, s2mps15_ldo_voltage_ranges2),
|
|
regulator_desc_s2mps15_ldo(15, s2mps15_ldo_voltage_ranges1),
|
|
regulator_desc_s2mps15_ldo(16, s2mps15_ldo_voltage_ranges1),
|
|
regulator_desc_s2mps15_ldo(17, s2mps15_ldo_voltage_ranges2),
|
|
regulator_desc_s2mps15_ldo(18, s2mps15_ldo_voltage_ranges1),
|
|
regulator_desc_s2mps15_ldo(19, s2mps15_ldo_voltage_ranges2),
|
|
regulator_desc_s2mps15_ldo(20, s2mps15_ldo_voltage_ranges1),
|
|
regulator_desc_s2mps15_ldo(21, s2mps15_ldo_voltage_ranges2),
|
|
regulator_desc_s2mps15_ldo(22, s2mps15_ldo_voltage_ranges3),
|
|
regulator_desc_s2mps15_ldo(23, s2mps15_ldo_voltage_ranges1),
|
|
regulator_desc_s2mps15_ldo(24, s2mps15_ldo_voltage_ranges2),
|
|
regulator_desc_s2mps15_ldo(25, s2mps15_ldo_voltage_ranges2),
|
|
regulator_desc_s2mps15_ldo(26, s2mps15_ldo_voltage_ranges3),
|
|
regulator_desc_s2mps15_ldo(27, s2mps15_ldo_voltage_ranges1),
|
|
regulator_desc_s2mps15_buck(1, s2mps15_buck_voltage_ranges1),
|
|
regulator_desc_s2mps15_buck(2, s2mps15_buck_voltage_ranges1),
|
|
regulator_desc_s2mps15_buck(3, s2mps15_buck_voltage_ranges1),
|
|
regulator_desc_s2mps15_buck(4, s2mps15_buck_voltage_ranges1),
|
|
regulator_desc_s2mps15_buck(5, s2mps15_buck_voltage_ranges1),
|
|
regulator_desc_s2mps15_buck(6, s2mps15_buck_voltage_ranges1),
|
|
regulator_desc_s2mps15_buck(7, s2mps15_buck_voltage_ranges1),
|
|
regulator_desc_s2mps15_buck(8, s2mps15_buck_voltage_ranges2),
|
|
regulator_desc_s2mps15_buck(9, s2mps15_buck_voltage_ranges2),
|
|
regulator_desc_s2mps15_buck(10, s2mps15_buck_voltage_ranges2),
|
|
};
|
|
|
|
static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
|
|
struct regulator_dev *rdev)
|
|
{
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask, S2MPS14_ENABLE_EXT_CONTROL);
|
|
}
|
|
|
|
static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
|
|
struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
|
|
{
|
|
int *gpio = s2mps11->ext_control_gpio;
|
|
unsigned int i;
|
|
unsigned int valid_regulators[3] = { S2MPS14_LDO10, S2MPS14_LDO11,
|
|
S2MPS14_LDO12 };
|
|
|
|
for (i = 0; i < ARRAY_SIZE(valid_regulators); i++) {
|
|
unsigned int reg = valid_regulators[i];
|
|
|
|
if (!rdata[reg].init_data || !rdata[reg].of_node)
|
|
continue;
|
|
|
|
gpio[reg] = of_get_named_gpio(rdata[reg].of_node,
|
|
"samsung,ext-control-gpios", 0);
|
|
if (gpio_is_valid(gpio[reg]))
|
|
dev_dbg(&pdev->dev, "Using GPIO %d for ext-control over %d/%s\n",
|
|
gpio[reg], reg, rdata[reg].name);
|
|
}
|
|
}
|
|
|
|
static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
|
|
struct of_regulator_match *rdata, struct s2mps11_info *s2mps11,
|
|
unsigned int rdev_num)
|
|
{
|
|
struct device_node *reg_np;
|
|
|
|
reg_np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
|
|
if (!reg_np) {
|
|
dev_err(&pdev->dev, "could not find regulators sub-node\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
of_regulator_match(&pdev->dev, reg_np, rdata, rdev_num);
|
|
if (s2mps11->dev_type == S2MPS14X)
|
|
s2mps14_pmic_dt_parse_ext_control_gpio(pdev, rdata, s2mps11);
|
|
|
|
of_node_put(reg_np);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s2mpu02_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
|
{
|
|
unsigned int ramp_val, ramp_shift, ramp_reg;
|
|
|
|
switch (rdev_get_id(rdev)) {
|
|
case S2MPU02_BUCK1:
|
|
ramp_shift = S2MPU02_BUCK1_RAMP_SHIFT;
|
|
break;
|
|
case S2MPU02_BUCK2:
|
|
ramp_shift = S2MPU02_BUCK2_RAMP_SHIFT;
|
|
break;
|
|
case S2MPU02_BUCK3:
|
|
ramp_shift = S2MPU02_BUCK3_RAMP_SHIFT;
|
|
break;
|
|
case S2MPU02_BUCK4:
|
|
ramp_shift = S2MPU02_BUCK4_RAMP_SHIFT;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
ramp_reg = S2MPU02_REG_RAMP1;
|
|
ramp_val = get_ramp_delay(ramp_delay);
|
|
|
|
return regmap_update_bits(rdev->regmap, ramp_reg,
|
|
S2MPU02_BUCK1234_RAMP_MASK << ramp_shift,
|
|
ramp_val << ramp_shift);
|
|
}
|
|
|
|
static const struct regulator_ops s2mpu02_ldo_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = s2mps14_regulator_enable,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_suspend_disable = s2mps14_regulator_set_suspend_disable,
|
|
};
|
|
|
|
static const struct regulator_ops s2mpu02_buck_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = s2mps14_regulator_enable,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_suspend_disable = s2mps14_regulator_set_suspend_disable,
|
|
.set_ramp_delay = s2mpu02_set_ramp_delay,
|
|
};
|
|
|
|
#define regulator_desc_s2mpu02_ldo1(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPU02_LDO##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_LDO_MIN_900MV, \
|
|
.uV_step = S2MPU02_LDO_STEP_12_5MV, \
|
|
.linear_min_sel = S2MPU02_LDO_GROUP1_START_SEL, \
|
|
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPU02_REG_L1CTRL, \
|
|
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_L1CTRL, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_ldo2(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPU02_LDO##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_LDO_MIN_1050MV, \
|
|
.uV_step = S2MPU02_LDO_STEP_25MV, \
|
|
.linear_min_sel = S2MPU02_LDO_GROUP2_START_SEL, \
|
|
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPU02_REG_L2CTRL1, \
|
|
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_L2CTRL1, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_ldo3(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPU02_LDO##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_LDO_MIN_900MV, \
|
|
.uV_step = S2MPU02_LDO_STEP_12_5MV, \
|
|
.linear_min_sel = S2MPU02_LDO_GROUP1_START_SEL, \
|
|
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
|
|
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_ldo4(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPU02_LDO##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_LDO_MIN_1050MV, \
|
|
.uV_step = S2MPU02_LDO_STEP_25MV, \
|
|
.linear_min_sel = S2MPU02_LDO_GROUP2_START_SEL, \
|
|
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
|
|
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_ldo5(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPU02_LDO##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_LDO_MIN_1600MV, \
|
|
.uV_step = S2MPU02_LDO_STEP_50MV, \
|
|
.linear_min_sel = S2MPU02_LDO_GROUP3_START_SEL, \
|
|
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
|
|
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mpu02_buck1234(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPU02_BUCK##num, \
|
|
.ops = &s2mpu02_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_BUCK1234_MIN_600MV, \
|
|
.uV_step = S2MPU02_BUCK1234_STEP_6_25MV, \
|
|
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
|
|
.linear_min_sel = S2MPU02_BUCK1234_START_SEL, \
|
|
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPU02_REG_B1CTRL2 + (num - 1) * 2, \
|
|
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_B1CTRL1 + (num - 1) * 2, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_buck5(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPU02_BUCK##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_BUCK5_MIN_1081_25MV, \
|
|
.uV_step = S2MPU02_BUCK5_STEP_6_25MV, \
|
|
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
|
|
.linear_min_sel = S2MPU02_BUCK5_START_SEL, \
|
|
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPU02_REG_B5CTRL2, \
|
|
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_B5CTRL1, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_buck6(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPU02_BUCK##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_BUCK6_MIN_1700MV, \
|
|
.uV_step = S2MPU02_BUCK6_STEP_2_50MV, \
|
|
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
|
|
.linear_min_sel = S2MPU02_BUCK6_START_SEL, \
|
|
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPU02_REG_B6CTRL2, \
|
|
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_B6CTRL1, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_buck7(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPU02_BUCK##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_BUCK7_MIN_900MV, \
|
|
.uV_step = S2MPU02_BUCK7_STEP_6_25MV, \
|
|
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
|
|
.linear_min_sel = S2MPU02_BUCK7_START_SEL, \
|
|
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPU02_REG_B7CTRL2, \
|
|
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_B7CTRL1, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
|
|
static const struct regulator_desc s2mpu02_regulators[] = {
|
|
regulator_desc_s2mpu02_ldo1(1),
|
|
regulator_desc_s2mpu02_ldo2(2),
|
|
regulator_desc_s2mpu02_ldo4(3),
|
|
regulator_desc_s2mpu02_ldo5(4),
|
|
regulator_desc_s2mpu02_ldo4(5),
|
|
regulator_desc_s2mpu02_ldo3(6),
|
|
regulator_desc_s2mpu02_ldo3(7),
|
|
regulator_desc_s2mpu02_ldo4(8),
|
|
regulator_desc_s2mpu02_ldo5(9),
|
|
regulator_desc_s2mpu02_ldo3(10),
|
|
regulator_desc_s2mpu02_ldo4(11),
|
|
regulator_desc_s2mpu02_ldo5(12),
|
|
regulator_desc_s2mpu02_ldo5(13),
|
|
regulator_desc_s2mpu02_ldo5(14),
|
|
regulator_desc_s2mpu02_ldo5(15),
|
|
regulator_desc_s2mpu02_ldo5(16),
|
|
regulator_desc_s2mpu02_ldo4(17),
|
|
regulator_desc_s2mpu02_ldo5(18),
|
|
regulator_desc_s2mpu02_ldo3(19),
|
|
regulator_desc_s2mpu02_ldo4(20),
|
|
regulator_desc_s2mpu02_ldo5(21),
|
|
regulator_desc_s2mpu02_ldo5(22),
|
|
regulator_desc_s2mpu02_ldo5(23),
|
|
regulator_desc_s2mpu02_ldo4(24),
|
|
regulator_desc_s2mpu02_ldo5(25),
|
|
regulator_desc_s2mpu02_ldo4(26),
|
|
regulator_desc_s2mpu02_ldo5(27),
|
|
regulator_desc_s2mpu02_ldo5(28),
|
|
regulator_desc_s2mpu02_buck1234(1),
|
|
regulator_desc_s2mpu02_buck1234(2),
|
|
regulator_desc_s2mpu02_buck1234(3),
|
|
regulator_desc_s2mpu02_buck1234(4),
|
|
regulator_desc_s2mpu02_buck5(5),
|
|
regulator_desc_s2mpu02_buck6(6),
|
|
regulator_desc_s2mpu02_buck7(7),
|
|
};
|
|
|
|
static int s2mps11_pmic_probe(struct platform_device *pdev)
|
|
{
|
|
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
|
struct sec_platform_data *pdata = NULL;
|
|
struct of_regulator_match *rdata = NULL;
|
|
struct regulator_config config = { };
|
|
struct s2mps11_info *s2mps11;
|
|
unsigned int rdev_num = 0;
|
|
int i, ret = 0;
|
|
const struct regulator_desc *regulators;
|
|
|
|
s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info),
|
|
GFP_KERNEL);
|
|
if (!s2mps11)
|
|
return -ENOMEM;
|
|
|
|
s2mps11->dev_type = platform_get_device_id(pdev)->driver_data;
|
|
switch (s2mps11->dev_type) {
|
|
case S2MPS11X:
|
|
rdev_num = ARRAY_SIZE(s2mps11_regulators);
|
|
regulators = s2mps11_regulators;
|
|
BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mps11_regulators));
|
|
break;
|
|
case S2MPS13X:
|
|
rdev_num = ARRAY_SIZE(s2mps13_regulators);
|
|
regulators = s2mps13_regulators;
|
|
BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mps13_regulators));
|
|
break;
|
|
case S2MPS14X:
|
|
rdev_num = ARRAY_SIZE(s2mps14_regulators);
|
|
regulators = s2mps14_regulators;
|
|
BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mps14_regulators));
|
|
break;
|
|
case S2MPS15X:
|
|
rdev_num = ARRAY_SIZE(s2mps15_regulators);
|
|
regulators = s2mps15_regulators;
|
|
BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mps15_regulators));
|
|
break;
|
|
case S2MPU02:
|
|
rdev_num = ARRAY_SIZE(s2mpu02_regulators);
|
|
regulators = s2mpu02_regulators;
|
|
BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mpu02_regulators));
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "Invalid device type: %u\n",
|
|
s2mps11->dev_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
s2mps11->ext_control_gpio = devm_kmalloc_array(&pdev->dev,
|
|
rdev_num, sizeof(*s2mps11->ext_control_gpio),
|
|
GFP_KERNEL);
|
|
if (!s2mps11->ext_control_gpio)
|
|
return -ENOMEM;
|
|
/*
|
|
* 0 is a valid GPIO so initialize all GPIO-s to negative value
|
|
* to indicate that external control won't be used for this regulator.
|
|
*/
|
|
for (i = 0; i < rdev_num; i++)
|
|
s2mps11->ext_control_gpio[i] = -EINVAL;
|
|
|
|
if (!iodev->dev->of_node) {
|
|
if (iodev->pdata) {
|
|
pdata = iodev->pdata;
|
|
goto common_reg;
|
|
} else {
|
|
dev_err(pdev->dev.parent,
|
|
"Platform data or DT node not supplied\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
rdata = kcalloc(rdev_num, sizeof(*rdata), GFP_KERNEL);
|
|
if (!rdata)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < rdev_num; i++)
|
|
rdata[i].name = regulators[i].name;
|
|
|
|
ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11, rdev_num);
|
|
if (ret)
|
|
goto out;
|
|
|
|
common_reg:
|
|
platform_set_drvdata(pdev, s2mps11);
|
|
|
|
config.dev = &pdev->dev;
|
|
config.regmap = iodev->regmap_pmic;
|
|
config.driver_data = s2mps11;
|
|
config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
|
|
config.ena_gpio_initialized = true;
|
|
for (i = 0; i < rdev_num; i++) {
|
|
struct regulator_dev *regulator;
|
|
|
|
if (pdata) {
|
|
config.init_data = pdata->regulators[i].initdata;
|
|
config.of_node = pdata->regulators[i].reg_node;
|
|
} else {
|
|
config.init_data = rdata[i].init_data;
|
|
config.of_node = rdata[i].of_node;
|
|
}
|
|
config.ena_gpio = s2mps11->ext_control_gpio[i];
|
|
|
|
regulator = devm_regulator_register(&pdev->dev,
|
|
®ulators[i], &config);
|
|
if (IS_ERR(regulator)) {
|
|
ret = PTR_ERR(regulator);
|
|
dev_err(&pdev->dev, "regulator init failed for %d\n",
|
|
i);
|
|
goto out;
|
|
}
|
|
|
|
if (gpio_is_valid(s2mps11->ext_control_gpio[i])) {
|
|
ret = s2mps14_pmic_enable_ext_control(s2mps11,
|
|
regulator);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev,
|
|
"failed to enable GPIO control over %s: %d\n",
|
|
regulator->desc->name, ret);
|
|
goto out;
|
|
}
|
|
}
|
|
}
|
|
|
|
out:
|
|
kfree(rdata);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct platform_device_id s2mps11_pmic_id[] = {
|
|
{ "s2mps11-regulator", S2MPS11X},
|
|
{ "s2mps13-regulator", S2MPS13X},
|
|
{ "s2mps14-regulator", S2MPS14X},
|
|
{ "s2mps15-regulator", S2MPS15X},
|
|
{ "s2mpu02-regulator", S2MPU02},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id);
|
|
|
|
static struct platform_driver s2mps11_pmic_driver = {
|
|
.driver = {
|
|
.name = "s2mps11-pmic",
|
|
},
|
|
.probe = s2mps11_pmic_probe,
|
|
.id_table = s2mps11_pmic_id,
|
|
};
|
|
|
|
module_platform_driver(s2mps11_pmic_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
|
|
MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPS15/S2MPU02 Regulator Driver");
|
|
MODULE_LICENSE("GPL");
|