b1fcf55eea
This extends the existing wait-for-ccid routine so that it may be used with different types of CCID, addressing the following problems: 1) The queue-drain mechanism only works with rate-based CCIDs. If CCID-2 for example has a full TX queue and becomes network-limited just as the application wants to close, then waiting for CCID-2 to become unblocked could lead to an indefinite delay (i.e., application "hangs"). 2) Since each TX CCID in turn uses a feedback mechanism, there may be changes in its sending policy while the queue is being drained. This can lead to further delays during which the application will not be able to terminate. 3) The minimum wait time for CCID-3/4 can be expected to be the queue length times the current inter-packet delay. For example if tx_qlen=100 and a delay of 15 ms is used for each packet, then the application would have to wait for a minimum of 1.5 seconds before being allowed to exit. 4) There is no way for the user/application to control this behaviour. It would be good to use the timeout argument of dccp_close() as an upper bound. Then the maximum time that an application is willing to wait for its CCIDs to can be set via the SO_LINGER option. These problems are addressed by giving the CCID a grace period of up to the `timeout' value. The wait-for-ccid function is, as before, used when the application (a) has read all the data in its receive buffer and (b) if SO_LINGER was set with a non-zero linger time, or (c) the socket is either in the OPEN (active close) or in the PASSIVE_CLOSEREQ state (client application closes after receiving CloseReq). In addition, there is a catch-all case of __skb_queue_purge() after waiting for the CCID. This is necessary since the write queue may still have data when (a) the host has been passively-closed, (b) abnormal termination (unread data, zero linger time), (c) wait-for-ccid could not finish within the given time limit. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
683 lines
20 KiB
C
683 lines
20 KiB
C
/*
|
|
* net/dccp/output.c
|
|
*
|
|
* An implementation of the DCCP protocol
|
|
* Arnaldo Carvalho de Melo <acme@conectiva.com.br>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/dccp.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <net/inet_sock.h>
|
|
#include <net/sock.h>
|
|
|
|
#include "ackvec.h"
|
|
#include "ccid.h"
|
|
#include "dccp.h"
|
|
|
|
static inline void dccp_event_ack_sent(struct sock *sk)
|
|
{
|
|
inet_csk_clear_xmit_timer(sk, ICSK_TIME_DACK);
|
|
}
|
|
|
|
static void dccp_skb_entail(struct sock *sk, struct sk_buff *skb)
|
|
{
|
|
skb_set_owner_w(skb, sk);
|
|
WARN_ON(sk->sk_send_head);
|
|
sk->sk_send_head = skb;
|
|
}
|
|
|
|
/*
|
|
* All SKB's seen here are completely headerless. It is our
|
|
* job to build the DCCP header, and pass the packet down to
|
|
* IP so it can do the same plus pass the packet off to the
|
|
* device.
|
|
*/
|
|
static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
|
|
{
|
|
if (likely(skb != NULL)) {
|
|
const struct inet_sock *inet = inet_sk(sk);
|
|
const struct inet_connection_sock *icsk = inet_csk(sk);
|
|
struct dccp_sock *dp = dccp_sk(sk);
|
|
struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb);
|
|
struct dccp_hdr *dh;
|
|
/* XXX For now we're using only 48 bits sequence numbers */
|
|
const u32 dccp_header_size = sizeof(*dh) +
|
|
sizeof(struct dccp_hdr_ext) +
|
|
dccp_packet_hdr_len(dcb->dccpd_type);
|
|
int err, set_ack = 1;
|
|
u64 ackno = dp->dccps_gsr;
|
|
/*
|
|
* Increment GSS here already in case the option code needs it.
|
|
* Update GSS for real only if option processing below succeeds.
|
|
*/
|
|
dcb->dccpd_seq = ADD48(dp->dccps_gss, 1);
|
|
|
|
switch (dcb->dccpd_type) {
|
|
case DCCP_PKT_DATA:
|
|
set_ack = 0;
|
|
/* fall through */
|
|
case DCCP_PKT_DATAACK:
|
|
case DCCP_PKT_RESET:
|
|
break;
|
|
|
|
case DCCP_PKT_REQUEST:
|
|
set_ack = 0;
|
|
/* Use ISS on the first (non-retransmitted) Request. */
|
|
if (icsk->icsk_retransmits == 0)
|
|
dcb->dccpd_seq = dp->dccps_iss;
|
|
/* fall through */
|
|
|
|
case DCCP_PKT_SYNC:
|
|
case DCCP_PKT_SYNCACK:
|
|
ackno = dcb->dccpd_ack_seq;
|
|
/* fall through */
|
|
default:
|
|
/*
|
|
* Set owner/destructor: some skbs are allocated via
|
|
* alloc_skb (e.g. when retransmission may happen).
|
|
* Only Data, DataAck, and Reset packets should come
|
|
* through here with skb->sk set.
|
|
*/
|
|
WARN_ON(skb->sk);
|
|
skb_set_owner_w(skb, sk);
|
|
break;
|
|
}
|
|
|
|
if (dccp_insert_options(sk, skb)) {
|
|
kfree_skb(skb);
|
|
return -EPROTO;
|
|
}
|
|
|
|
|
|
/* Build DCCP header and checksum it. */
|
|
dh = dccp_zeroed_hdr(skb, dccp_header_size);
|
|
dh->dccph_type = dcb->dccpd_type;
|
|
dh->dccph_sport = inet->inet_sport;
|
|
dh->dccph_dport = inet->inet_dport;
|
|
dh->dccph_doff = (dccp_header_size + dcb->dccpd_opt_len) / 4;
|
|
dh->dccph_ccval = dcb->dccpd_ccval;
|
|
dh->dccph_cscov = dp->dccps_pcslen;
|
|
/* XXX For now we're using only 48 bits sequence numbers */
|
|
dh->dccph_x = 1;
|
|
|
|
dccp_update_gss(sk, dcb->dccpd_seq);
|
|
dccp_hdr_set_seq(dh, dp->dccps_gss);
|
|
if (set_ack)
|
|
dccp_hdr_set_ack(dccp_hdr_ack_bits(skb), ackno);
|
|
|
|
switch (dcb->dccpd_type) {
|
|
case DCCP_PKT_REQUEST:
|
|
dccp_hdr_request(skb)->dccph_req_service =
|
|
dp->dccps_service;
|
|
/*
|
|
* Limit Ack window to ISS <= P.ackno <= GSS, so that
|
|
* only Responses to Requests we sent are considered.
|
|
*/
|
|
dp->dccps_awl = dp->dccps_iss;
|
|
break;
|
|
case DCCP_PKT_RESET:
|
|
dccp_hdr_reset(skb)->dccph_reset_code =
|
|
dcb->dccpd_reset_code;
|
|
break;
|
|
}
|
|
|
|
icsk->icsk_af_ops->send_check(sk, skb);
|
|
|
|
if (set_ack)
|
|
dccp_event_ack_sent(sk);
|
|
|
|
DCCP_INC_STATS(DCCP_MIB_OUTSEGS);
|
|
|
|
err = icsk->icsk_af_ops->queue_xmit(skb);
|
|
return net_xmit_eval(err);
|
|
}
|
|
return -ENOBUFS;
|
|
}
|
|
|
|
/**
|
|
* dccp_determine_ccmps - Find out about CCID-specfic packet-size limits
|
|
* We only consider the HC-sender CCID for setting the CCMPS (RFC 4340, 14.),
|
|
* since the RX CCID is restricted to feedback packets (Acks), which are small
|
|
* in comparison with the data traffic. A value of 0 means "no current CCMPS".
|
|
*/
|
|
static u32 dccp_determine_ccmps(const struct dccp_sock *dp)
|
|
{
|
|
const struct ccid *tx_ccid = dp->dccps_hc_tx_ccid;
|
|
|
|
if (tx_ccid == NULL || tx_ccid->ccid_ops == NULL)
|
|
return 0;
|
|
return tx_ccid->ccid_ops->ccid_ccmps;
|
|
}
|
|
|
|
unsigned int dccp_sync_mss(struct sock *sk, u32 pmtu)
|
|
{
|
|
struct inet_connection_sock *icsk = inet_csk(sk);
|
|
struct dccp_sock *dp = dccp_sk(sk);
|
|
u32 ccmps = dccp_determine_ccmps(dp);
|
|
u32 cur_mps = ccmps ? min(pmtu, ccmps) : pmtu;
|
|
|
|
/* Account for header lengths and IPv4/v6 option overhead */
|
|
cur_mps -= (icsk->icsk_af_ops->net_header_len + icsk->icsk_ext_hdr_len +
|
|
sizeof(struct dccp_hdr) + sizeof(struct dccp_hdr_ext));
|
|
|
|
/*
|
|
* Leave enough headroom for common DCCP header options.
|
|
* This only considers options which may appear on DCCP-Data packets, as
|
|
* per table 3 in RFC 4340, 5.8. When running out of space for other
|
|
* options (eg. Ack Vector which can take up to 255 bytes), it is better
|
|
* to schedule a separate Ack. Thus we leave headroom for the following:
|
|
* - 1 byte for Slow Receiver (11.6)
|
|
* - 6 bytes for Timestamp (13.1)
|
|
* - 10 bytes for Timestamp Echo (13.3)
|
|
* - 8 bytes for NDP count (7.7, when activated)
|
|
* - 6 bytes for Data Checksum (9.3)
|
|
* - %DCCPAV_MIN_OPTLEN bytes for Ack Vector size (11.4, when enabled)
|
|
*/
|
|
cur_mps -= roundup(1 + 6 + 10 + dp->dccps_send_ndp_count * 8 + 6 +
|
|
(dp->dccps_hc_rx_ackvec ? DCCPAV_MIN_OPTLEN : 0), 4);
|
|
|
|
/* And store cached results */
|
|
icsk->icsk_pmtu_cookie = pmtu;
|
|
dp->dccps_mss_cache = cur_mps;
|
|
|
|
return cur_mps;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(dccp_sync_mss);
|
|
|
|
void dccp_write_space(struct sock *sk)
|
|
{
|
|
struct socket_wq *wq;
|
|
|
|
rcu_read_lock();
|
|
wq = rcu_dereference(sk->sk_wq);
|
|
if (wq_has_sleeper(wq))
|
|
wake_up_interruptible(&wq->wait);
|
|
/* Should agree with poll, otherwise some programs break */
|
|
if (sock_writeable(sk))
|
|
sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
|
|
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
/**
|
|
* dccp_wait_for_ccid - Await CCID send permission
|
|
* @sk: socket to wait for
|
|
* @delay: timeout in jiffies
|
|
* This is used by CCIDs which need to delay the send time in process context.
|
|
*/
|
|
static int dccp_wait_for_ccid(struct sock *sk, unsigned long delay)
|
|
{
|
|
DEFINE_WAIT(wait);
|
|
long remaining;
|
|
|
|
prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
|
|
sk->sk_write_pending++;
|
|
release_sock(sk);
|
|
|
|
remaining = schedule_timeout(delay);
|
|
|
|
lock_sock(sk);
|
|
sk->sk_write_pending--;
|
|
finish_wait(sk_sleep(sk), &wait);
|
|
|
|
if (signal_pending(current) || sk->sk_err)
|
|
return -1;
|
|
return remaining;
|
|
}
|
|
|
|
/**
|
|
* dccp_xmit_packet - Send data packet under control of CCID
|
|
* Transmits next-queued payload and informs CCID to account for the packet.
|
|
*/
|
|
static void dccp_xmit_packet(struct sock *sk)
|
|
{
|
|
int err, len;
|
|
struct dccp_sock *dp = dccp_sk(sk);
|
|
struct sk_buff *skb = skb_dequeue(&sk->sk_write_queue);
|
|
|
|
if (unlikely(skb == NULL))
|
|
return;
|
|
len = skb->len;
|
|
|
|
if (sk->sk_state == DCCP_PARTOPEN) {
|
|
const u32 cur_mps = dp->dccps_mss_cache - DCCP_FEATNEG_OVERHEAD;
|
|
/*
|
|
* See 8.1.5 - Handshake Completion.
|
|
*
|
|
* For robustness we resend Confirm options until the client has
|
|
* entered OPEN. During the initial feature negotiation, the MPS
|
|
* is smaller than usual, reduced by the Change/Confirm options.
|
|
*/
|
|
if (!list_empty(&dp->dccps_featneg) && len > cur_mps) {
|
|
DCCP_WARN("Payload too large (%d) for featneg.\n", len);
|
|
dccp_send_ack(sk);
|
|
dccp_feat_list_purge(&dp->dccps_featneg);
|
|
}
|
|
|
|
inet_csk_schedule_ack(sk);
|
|
inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
|
|
inet_csk(sk)->icsk_rto,
|
|
DCCP_RTO_MAX);
|
|
DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_DATAACK;
|
|
} else if (dccp_ack_pending(sk)) {
|
|
DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_DATAACK;
|
|
} else {
|
|
DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_DATA;
|
|
}
|
|
|
|
err = dccp_transmit_skb(sk, skb);
|
|
if (err)
|
|
dccp_pr_debug("transmit_skb() returned err=%d\n", err);
|
|
/*
|
|
* Register this one as sent even if an error occurred. To the remote
|
|
* end a local packet drop is indistinguishable from network loss, i.e.
|
|
* any local drop will eventually be reported via receiver feedback.
|
|
*/
|
|
ccid_hc_tx_packet_sent(dp->dccps_hc_tx_ccid, sk, len);
|
|
}
|
|
|
|
/**
|
|
* dccp_flush_write_queue - Drain queue at end of connection
|
|
* Since dccp_sendmsg queues packets without waiting for them to be sent, it may
|
|
* happen that the TX queue is not empty at the end of a connection. We give the
|
|
* HC-sender CCID a grace period of up to @time_budget jiffies. If this function
|
|
* returns with a non-empty write queue, it will be purged later.
|
|
*/
|
|
void dccp_flush_write_queue(struct sock *sk, long *time_budget)
|
|
{
|
|
struct dccp_sock *dp = dccp_sk(sk);
|
|
struct sk_buff *skb;
|
|
long delay, rc;
|
|
|
|
while (*time_budget > 0 && (skb = skb_peek(&sk->sk_write_queue))) {
|
|
rc = ccid_hc_tx_send_packet(dp->dccps_hc_tx_ccid, sk, skb);
|
|
|
|
switch (ccid_packet_dequeue_eval(rc)) {
|
|
case CCID_PACKET_WILL_DEQUEUE_LATER:
|
|
/*
|
|
* If the CCID determines when to send, the next sending
|
|
* time is unknown or the CCID may not even send again
|
|
* (e.g. remote host crashes or lost Ack packets).
|
|
*/
|
|
DCCP_WARN("CCID did not manage to send all packets\n");
|
|
return;
|
|
case CCID_PACKET_DELAY:
|
|
delay = msecs_to_jiffies(rc);
|
|
if (delay > *time_budget)
|
|
return;
|
|
rc = dccp_wait_for_ccid(sk, delay);
|
|
if (rc < 0)
|
|
return;
|
|
*time_budget -= (delay - rc);
|
|
/* check again if we can send now */
|
|
break;
|
|
case CCID_PACKET_SEND_AT_ONCE:
|
|
dccp_xmit_packet(sk);
|
|
break;
|
|
case CCID_PACKET_ERR:
|
|
skb_dequeue(&sk->sk_write_queue);
|
|
kfree_skb(skb);
|
|
dccp_pr_debug("packet discarded due to err=%ld\n", rc);
|
|
}
|
|
}
|
|
}
|
|
|
|
void dccp_write_xmit(struct sock *sk)
|
|
{
|
|
struct dccp_sock *dp = dccp_sk(sk);
|
|
struct sk_buff *skb;
|
|
|
|
while ((skb = skb_peek(&sk->sk_write_queue))) {
|
|
int rc = ccid_hc_tx_send_packet(dp->dccps_hc_tx_ccid, sk, skb);
|
|
|
|
switch (ccid_packet_dequeue_eval(rc)) {
|
|
case CCID_PACKET_WILL_DEQUEUE_LATER:
|
|
return;
|
|
case CCID_PACKET_DELAY:
|
|
sk_reset_timer(sk, &dp->dccps_xmit_timer,
|
|
jiffies + msecs_to_jiffies(rc));
|
|
return;
|
|
case CCID_PACKET_SEND_AT_ONCE:
|
|
dccp_xmit_packet(sk);
|
|
break;
|
|
case CCID_PACKET_ERR:
|
|
skb_dequeue(&sk->sk_write_queue);
|
|
kfree_skb(skb);
|
|
dccp_pr_debug("packet discarded due to err=%d\n", rc);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* dccp_retransmit_skb - Retransmit Request, Close, or CloseReq packets
|
|
* There are only four retransmittable packet types in DCCP:
|
|
* - Request in client-REQUEST state (sec. 8.1.1),
|
|
* - CloseReq in server-CLOSEREQ state (sec. 8.3),
|
|
* - Close in node-CLOSING state (sec. 8.3),
|
|
* - Acks in client-PARTOPEN state (sec. 8.1.5, handled by dccp_delack_timer()).
|
|
* This function expects sk->sk_send_head to contain the original skb.
|
|
*/
|
|
int dccp_retransmit_skb(struct sock *sk)
|
|
{
|
|
WARN_ON(sk->sk_send_head == NULL);
|
|
|
|
if (inet_csk(sk)->icsk_af_ops->rebuild_header(sk) != 0)
|
|
return -EHOSTUNREACH; /* Routing failure or similar. */
|
|
|
|
/* this count is used to distinguish original and retransmitted skb */
|
|
inet_csk(sk)->icsk_retransmits++;
|
|
|
|
return dccp_transmit_skb(sk, skb_clone(sk->sk_send_head, GFP_ATOMIC));
|
|
}
|
|
|
|
struct sk_buff *dccp_make_response(struct sock *sk, struct dst_entry *dst,
|
|
struct request_sock *req)
|
|
{
|
|
struct dccp_hdr *dh;
|
|
struct dccp_request_sock *dreq;
|
|
const u32 dccp_header_size = sizeof(struct dccp_hdr) +
|
|
sizeof(struct dccp_hdr_ext) +
|
|
sizeof(struct dccp_hdr_response);
|
|
struct sk_buff *skb = sock_wmalloc(sk, sk->sk_prot->max_header, 1,
|
|
GFP_ATOMIC);
|
|
if (skb == NULL)
|
|
return NULL;
|
|
|
|
/* Reserve space for headers. */
|
|
skb_reserve(skb, sk->sk_prot->max_header);
|
|
|
|
skb_dst_set(skb, dst_clone(dst));
|
|
|
|
dreq = dccp_rsk(req);
|
|
if (inet_rsk(req)->acked) /* increase ISS upon retransmission */
|
|
dccp_inc_seqno(&dreq->dreq_iss);
|
|
DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_RESPONSE;
|
|
DCCP_SKB_CB(skb)->dccpd_seq = dreq->dreq_iss;
|
|
|
|
/* Resolve feature dependencies resulting from choice of CCID */
|
|
if (dccp_feat_server_ccid_dependencies(dreq))
|
|
goto response_failed;
|
|
|
|
if (dccp_insert_options_rsk(dreq, skb))
|
|
goto response_failed;
|
|
|
|
/* Build and checksum header */
|
|
dh = dccp_zeroed_hdr(skb, dccp_header_size);
|
|
|
|
dh->dccph_sport = inet_rsk(req)->loc_port;
|
|
dh->dccph_dport = inet_rsk(req)->rmt_port;
|
|
dh->dccph_doff = (dccp_header_size +
|
|
DCCP_SKB_CB(skb)->dccpd_opt_len) / 4;
|
|
dh->dccph_type = DCCP_PKT_RESPONSE;
|
|
dh->dccph_x = 1;
|
|
dccp_hdr_set_seq(dh, dreq->dreq_iss);
|
|
dccp_hdr_set_ack(dccp_hdr_ack_bits(skb), dreq->dreq_isr);
|
|
dccp_hdr_response(skb)->dccph_resp_service = dreq->dreq_service;
|
|
|
|
dccp_csum_outgoing(skb);
|
|
|
|
/* We use `acked' to remember that a Response was already sent. */
|
|
inet_rsk(req)->acked = 1;
|
|
DCCP_INC_STATS(DCCP_MIB_OUTSEGS);
|
|
return skb;
|
|
response_failed:
|
|
kfree_skb(skb);
|
|
return NULL;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(dccp_make_response);
|
|
|
|
/* answer offending packet in @rcv_skb with Reset from control socket @ctl */
|
|
struct sk_buff *dccp_ctl_make_reset(struct sock *sk, struct sk_buff *rcv_skb)
|
|
{
|
|
struct dccp_hdr *rxdh = dccp_hdr(rcv_skb), *dh;
|
|
struct dccp_skb_cb *dcb = DCCP_SKB_CB(rcv_skb);
|
|
const u32 dccp_hdr_reset_len = sizeof(struct dccp_hdr) +
|
|
sizeof(struct dccp_hdr_ext) +
|
|
sizeof(struct dccp_hdr_reset);
|
|
struct dccp_hdr_reset *dhr;
|
|
struct sk_buff *skb;
|
|
|
|
skb = alloc_skb(sk->sk_prot->max_header, GFP_ATOMIC);
|
|
if (skb == NULL)
|
|
return NULL;
|
|
|
|
skb_reserve(skb, sk->sk_prot->max_header);
|
|
|
|
/* Swap the send and the receive. */
|
|
dh = dccp_zeroed_hdr(skb, dccp_hdr_reset_len);
|
|
dh->dccph_type = DCCP_PKT_RESET;
|
|
dh->dccph_sport = rxdh->dccph_dport;
|
|
dh->dccph_dport = rxdh->dccph_sport;
|
|
dh->dccph_doff = dccp_hdr_reset_len / 4;
|
|
dh->dccph_x = 1;
|
|
|
|
dhr = dccp_hdr_reset(skb);
|
|
dhr->dccph_reset_code = dcb->dccpd_reset_code;
|
|
|
|
switch (dcb->dccpd_reset_code) {
|
|
case DCCP_RESET_CODE_PACKET_ERROR:
|
|
dhr->dccph_reset_data[0] = rxdh->dccph_type;
|
|
break;
|
|
case DCCP_RESET_CODE_OPTION_ERROR: /* fall through */
|
|
case DCCP_RESET_CODE_MANDATORY_ERROR:
|
|
memcpy(dhr->dccph_reset_data, dcb->dccpd_reset_data, 3);
|
|
break;
|
|
}
|
|
/*
|
|
* From RFC 4340, 8.3.1:
|
|
* If P.ackno exists, set R.seqno := P.ackno + 1.
|
|
* Else set R.seqno := 0.
|
|
*/
|
|
if (dcb->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ)
|
|
dccp_hdr_set_seq(dh, ADD48(dcb->dccpd_ack_seq, 1));
|
|
dccp_hdr_set_ack(dccp_hdr_ack_bits(skb), dcb->dccpd_seq);
|
|
|
|
dccp_csum_outgoing(skb);
|
|
return skb;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(dccp_ctl_make_reset);
|
|
|
|
/* send Reset on established socket, to close or abort the connection */
|
|
int dccp_send_reset(struct sock *sk, enum dccp_reset_codes code)
|
|
{
|
|
struct sk_buff *skb;
|
|
/*
|
|
* FIXME: what if rebuild_header fails?
|
|
* Should we be doing a rebuild_header here?
|
|
*/
|
|
int err = inet_csk(sk)->icsk_af_ops->rebuild_header(sk);
|
|
|
|
if (err != 0)
|
|
return err;
|
|
|
|
skb = sock_wmalloc(sk, sk->sk_prot->max_header, 1, GFP_ATOMIC);
|
|
if (skb == NULL)
|
|
return -ENOBUFS;
|
|
|
|
/* Reserve space for headers and prepare control bits. */
|
|
skb_reserve(skb, sk->sk_prot->max_header);
|
|
DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_RESET;
|
|
DCCP_SKB_CB(skb)->dccpd_reset_code = code;
|
|
|
|
return dccp_transmit_skb(sk, skb);
|
|
}
|
|
|
|
/*
|
|
* Do all connect socket setups that can be done AF independent.
|
|
*/
|
|
int dccp_connect(struct sock *sk)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct dccp_sock *dp = dccp_sk(sk);
|
|
struct dst_entry *dst = __sk_dst_get(sk);
|
|
struct inet_connection_sock *icsk = inet_csk(sk);
|
|
|
|
sk->sk_err = 0;
|
|
sock_reset_flag(sk, SOCK_DONE);
|
|
|
|
dccp_sync_mss(sk, dst_mtu(dst));
|
|
|
|
/* do not connect if feature negotiation setup fails */
|
|
if (dccp_feat_finalise_settings(dccp_sk(sk)))
|
|
return -EPROTO;
|
|
|
|
/* Initialise GAR as per 8.5; AWL/AWH are set in dccp_transmit_skb() */
|
|
dp->dccps_gar = dp->dccps_iss;
|
|
|
|
skb = alloc_skb(sk->sk_prot->max_header, sk->sk_allocation);
|
|
if (unlikely(skb == NULL))
|
|
return -ENOBUFS;
|
|
|
|
/* Reserve space for headers. */
|
|
skb_reserve(skb, sk->sk_prot->max_header);
|
|
|
|
DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_REQUEST;
|
|
|
|
dccp_skb_entail(sk, skb);
|
|
dccp_transmit_skb(sk, skb_clone(skb, GFP_KERNEL));
|
|
DCCP_INC_STATS(DCCP_MIB_ACTIVEOPENS);
|
|
|
|
/* Timer for repeating the REQUEST until an answer. */
|
|
icsk->icsk_retransmits = 0;
|
|
inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
|
|
icsk->icsk_rto, DCCP_RTO_MAX);
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(dccp_connect);
|
|
|
|
void dccp_send_ack(struct sock *sk)
|
|
{
|
|
/* If we have been reset, we may not send again. */
|
|
if (sk->sk_state != DCCP_CLOSED) {
|
|
struct sk_buff *skb = alloc_skb(sk->sk_prot->max_header,
|
|
GFP_ATOMIC);
|
|
|
|
if (skb == NULL) {
|
|
inet_csk_schedule_ack(sk);
|
|
inet_csk(sk)->icsk_ack.ato = TCP_ATO_MIN;
|
|
inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
|
|
TCP_DELACK_MAX,
|
|
DCCP_RTO_MAX);
|
|
return;
|
|
}
|
|
|
|
/* Reserve space for headers */
|
|
skb_reserve(skb, sk->sk_prot->max_header);
|
|
DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_ACK;
|
|
dccp_transmit_skb(sk, skb);
|
|
}
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(dccp_send_ack);
|
|
|
|
#if 0
|
|
/* FIXME: Is this still necessary (11.3) - currently nowhere used by DCCP. */
|
|
void dccp_send_delayed_ack(struct sock *sk)
|
|
{
|
|
struct inet_connection_sock *icsk = inet_csk(sk);
|
|
/*
|
|
* FIXME: tune this timer. elapsed time fixes the skew, so no problem
|
|
* with using 2s, and active senders also piggyback the ACK into a
|
|
* DATAACK packet, so this is really for quiescent senders.
|
|
*/
|
|
unsigned long timeout = jiffies + 2 * HZ;
|
|
|
|
/* Use new timeout only if there wasn't a older one earlier. */
|
|
if (icsk->icsk_ack.pending & ICSK_ACK_TIMER) {
|
|
/* If delack timer was blocked or is about to expire,
|
|
* send ACK now.
|
|
*
|
|
* FIXME: check the "about to expire" part
|
|
*/
|
|
if (icsk->icsk_ack.blocked) {
|
|
dccp_send_ack(sk);
|
|
return;
|
|
}
|
|
|
|
if (!time_before(timeout, icsk->icsk_ack.timeout))
|
|
timeout = icsk->icsk_ack.timeout;
|
|
}
|
|
icsk->icsk_ack.pending |= ICSK_ACK_SCHED | ICSK_ACK_TIMER;
|
|
icsk->icsk_ack.timeout = timeout;
|
|
sk_reset_timer(sk, &icsk->icsk_delack_timer, timeout);
|
|
}
|
|
#endif
|
|
|
|
void dccp_send_sync(struct sock *sk, const u64 ackno,
|
|
const enum dccp_pkt_type pkt_type)
|
|
{
|
|
/*
|
|
* We are not putting this on the write queue, so
|
|
* dccp_transmit_skb() will set the ownership to this
|
|
* sock.
|
|
*/
|
|
struct sk_buff *skb = alloc_skb(sk->sk_prot->max_header, GFP_ATOMIC);
|
|
|
|
if (skb == NULL) {
|
|
/* FIXME: how to make sure the sync is sent? */
|
|
DCCP_CRIT("could not send %s", dccp_packet_name(pkt_type));
|
|
return;
|
|
}
|
|
|
|
/* Reserve space for headers and prepare control bits. */
|
|
skb_reserve(skb, sk->sk_prot->max_header);
|
|
DCCP_SKB_CB(skb)->dccpd_type = pkt_type;
|
|
DCCP_SKB_CB(skb)->dccpd_ack_seq = ackno;
|
|
|
|
dccp_transmit_skb(sk, skb);
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(dccp_send_sync);
|
|
|
|
/*
|
|
* Send a DCCP_PKT_CLOSE/CLOSEREQ. The caller locks the socket for us. This
|
|
* cannot be allowed to fail queueing a DCCP_PKT_CLOSE/CLOSEREQ frame under
|
|
* any circumstances.
|
|
*/
|
|
void dccp_send_close(struct sock *sk, const int active)
|
|
{
|
|
struct dccp_sock *dp = dccp_sk(sk);
|
|
struct sk_buff *skb;
|
|
const gfp_t prio = active ? GFP_KERNEL : GFP_ATOMIC;
|
|
|
|
skb = alloc_skb(sk->sk_prot->max_header, prio);
|
|
if (skb == NULL)
|
|
return;
|
|
|
|
/* Reserve space for headers and prepare control bits. */
|
|
skb_reserve(skb, sk->sk_prot->max_header);
|
|
if (dp->dccps_role == DCCP_ROLE_SERVER && !dp->dccps_server_timewait)
|
|
DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_CLOSEREQ;
|
|
else
|
|
DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_CLOSE;
|
|
|
|
if (active) {
|
|
dccp_skb_entail(sk, skb);
|
|
dccp_transmit_skb(sk, skb_clone(skb, prio));
|
|
/*
|
|
* Retransmission timer for active-close: RFC 4340, 8.3 requires
|
|
* to retransmit the Close/CloseReq until the CLOSING/CLOSEREQ
|
|
* state can be left. The initial timeout is 2 RTTs.
|
|
* Since RTT measurement is done by the CCIDs, there is no easy
|
|
* way to get an RTT sample. The fallback RTT from RFC 4340, 3.4
|
|
* is too low (200ms); we use a high value to avoid unnecessary
|
|
* retransmissions when the link RTT is > 0.2 seconds.
|
|
* FIXME: Let main module sample RTTs and use that instead.
|
|
*/
|
|
inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
|
|
DCCP_TIMEOUT_INIT, DCCP_RTO_MAX);
|
|
} else
|
|
dccp_transmit_skb(sk, skb);
|
|
}
|