kernel-fxtec-pro1x/drivers/usb/host/fsl-mph-dr-of.c
Anatolij Gustschin 230f7ede6c USB: add USB EHCI support for MPC5121 SoC
Extends FSL EHCI platform driver glue layer to support
MPC5121 USB controllers. MPC5121 Rev 2.0 silicon EHCI
registers are in big endian format. The appropriate flags
are set using the information in the platform data structure.
MPC83xx system interface registers are not available on
MPC512x, so the access to these registers is isolated in
MPC512x case. Furthermore the USB controller clocks
must be enabled before 512x register accesses which is
done by providing platform specific init callback.

The MPC512x internal USB PHY doesn't provide supply voltage.
For boards using different power switches allow specifying
DRVVBUS and PWR_FAULT signal polarity of the MPC5121 internal
PHY using "fsl,invert-drvvbus" and "fsl,invert-pwr-fault"
properties in the device tree USB nodes. Adds documentation
for this new device tree bindings.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:21:58 -07:00

308 lines
7.8 KiB
C

/*
* Setup platform devices needed by the Freescale multi-port host
* and/or dual-role USB controller modules based on the description
* in flat device tree.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
struct fsl_usb2_dev_data {
char *dr_mode; /* controller mode */
char *drivers[3]; /* drivers to instantiate for this mode */
enum fsl_usb2_operating_modes op_mode; /* operating mode */
};
struct fsl_usb2_dev_data dr_mode_data[] __devinitdata = {
{
.dr_mode = "host",
.drivers = { "fsl-ehci", NULL, NULL, },
.op_mode = FSL_USB2_DR_HOST,
},
{
.dr_mode = "otg",
.drivers = { "fsl-usb2-otg", "fsl-ehci", "fsl-usb2-udc", },
.op_mode = FSL_USB2_DR_OTG,
},
{
.dr_mode = "peripheral",
.drivers = { "fsl-usb2-udc", NULL, NULL, },
.op_mode = FSL_USB2_DR_DEVICE,
},
};
struct fsl_usb2_dev_data * __devinit get_dr_mode_data(struct device_node *np)
{
const unsigned char *prop;
int i;
prop = of_get_property(np, "dr_mode", NULL);
if (prop) {
for (i = 0; i < ARRAY_SIZE(dr_mode_data); i++) {
if (!strcmp(prop, dr_mode_data[i].dr_mode))
return &dr_mode_data[i];
}
}
pr_warn("%s: Invalid 'dr_mode' property, fallback to host mode\n",
np->full_name);
return &dr_mode_data[0]; /* mode not specified, use host */
}
static enum fsl_usb2_phy_modes __devinit determine_usb_phy(const char *phy_type)
{
if (!phy_type)
return FSL_USB2_PHY_NONE;
if (!strcasecmp(phy_type, "ulpi"))
return FSL_USB2_PHY_ULPI;
if (!strcasecmp(phy_type, "utmi"))
return FSL_USB2_PHY_UTMI;
if (!strcasecmp(phy_type, "utmi_wide"))
return FSL_USB2_PHY_UTMI_WIDE;
if (!strcasecmp(phy_type, "serial"))
return FSL_USB2_PHY_SERIAL;
return FSL_USB2_PHY_NONE;
}
struct platform_device * __devinit fsl_usb2_device_register(
struct platform_device *ofdev,
struct fsl_usb2_platform_data *pdata,
const char *name, int id)
{
struct platform_device *pdev;
const struct resource *res = ofdev->resource;
unsigned int num = ofdev->num_resources;
int retval;
pdev = platform_device_alloc(name, id);
if (!pdev) {
retval = -ENOMEM;
goto error;
}
pdev->dev.parent = &ofdev->dev;
pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask;
pdev->dev.dma_mask = &pdev->archdata.dma_mask;
*pdev->dev.dma_mask = *ofdev->dev.dma_mask;
retval = platform_device_add_data(pdev, pdata, sizeof(*pdata));
if (retval)
goto error;
if (num) {
retval = platform_device_add_resources(pdev, res, num);
if (retval)
goto error;
}
retval = platform_device_add(pdev);
if (retval)
goto error;
return pdev;
error:
platform_device_put(pdev);
return ERR_PTR(retval);
}
static const struct of_device_id fsl_usb2_mph_dr_of_match[];
static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
{
struct device_node *np = ofdev->dev.of_node;
struct platform_device *usb_dev;
struct fsl_usb2_platform_data data, *pdata;
struct fsl_usb2_dev_data *dev_data;
const struct of_device_id *match;
const unsigned char *prop;
static unsigned int idx;
int i;
if (!of_device_is_available(np))
return -ENODEV;
match = of_match_device(fsl_usb2_mph_dr_of_match, &ofdev->dev);
if (!match)
return -ENODEV;
pdata = &data;
if (match->data)
memcpy(pdata, match->data, sizeof(data));
else
memset(pdata, 0, sizeof(data));
dev_data = get_dr_mode_data(np);
if (of_device_is_compatible(np, "fsl-usb2-mph")) {
if (of_get_property(np, "port0", NULL))
pdata->port_enables |= FSL_USB2_PORT0_ENABLED;
if (of_get_property(np, "port1", NULL))
pdata->port_enables |= FSL_USB2_PORT1_ENABLED;
pdata->operating_mode = FSL_USB2_MPH_HOST;
} else {
if (of_get_property(np, "fsl,invert-drvvbus", NULL))
pdata->invert_drvvbus = 1;
if (of_get_property(np, "fsl,invert-pwr-fault", NULL))
pdata->invert_pwr_fault = 1;
/* setup mode selected in the device tree */
pdata->operating_mode = dev_data->op_mode;
}
prop = of_get_property(np, "phy_type", NULL);
pdata->phy_mode = determine_usb_phy(prop);
for (i = 0; i < ARRAY_SIZE(dev_data->drivers); i++) {
if (!dev_data->drivers[i])
continue;
usb_dev = fsl_usb2_device_register(ofdev, pdata,
dev_data->drivers[i], idx);
if (IS_ERR(usb_dev)) {
dev_err(&ofdev->dev, "Can't register usb device\n");
return PTR_ERR(usb_dev);
}
}
idx++;
return 0;
}
static int __devexit __unregister_subdev(struct device *dev, void *d)
{
platform_device_unregister(to_platform_device(dev));
return 0;
}
static int __devexit fsl_usb2_mph_dr_of_remove(struct platform_device *ofdev)
{
device_for_each_child(&ofdev->dev, NULL, __unregister_subdev);
return 0;
}
#ifdef CONFIG_PPC_MPC512x
#define USBGENCTRL 0x200 /* NOTE: big endian */
#define GC_WU_INT_CLR (1 << 5) /* Wakeup int clear */
#define GC_ULPI_SEL (1 << 4) /* ULPI i/f select (usb0 only)*/
#define GC_PPP (1 << 3) /* Inv. Port Power Polarity */
#define GC_PFP (1 << 2) /* Inv. Power Fault Polarity */
#define GC_WU_ULPI_EN (1 << 1) /* Wakeup on ULPI event */
#define GC_WU_IE (1 << 1) /* Wakeup interrupt enable */
#define ISIPHYCTRL 0x204 /* NOTE: big endian */
#define PHYCTRL_PHYE (1 << 4) /* On-chip UTMI PHY enable */
#define PHYCTRL_BSENH (1 << 3) /* Bit Stuff Enable High */
#define PHYCTRL_BSEN (1 << 2) /* Bit Stuff Enable */
#define PHYCTRL_LSFE (1 << 1) /* Line State Filter Enable */
#define PHYCTRL_PXE (1 << 0) /* PHY oscillator enable */
int fsl_usb2_mpc5121_init(struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
struct clk *clk;
char clk_name[10];
int base, clk_num;
base = pdev->resource->start & 0xf000;
if (base == 0x3000)
clk_num = 1;
else if (base == 0x4000)
clk_num = 2;
else
return -ENODEV;
snprintf(clk_name, sizeof(clk_name), "usb%d_clk", clk_num);
clk = clk_get(&pdev->dev, clk_name);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clk\n");
return PTR_ERR(clk);
}
clk_enable(clk);
pdata->clk = clk;
if (pdata->phy_mode == FSL_USB2_PHY_UTMI_WIDE) {
u32 reg = 0;
if (pdata->invert_drvvbus)
reg |= GC_PPP;
if (pdata->invert_pwr_fault)
reg |= GC_PFP;
out_be32(pdata->regs + ISIPHYCTRL, PHYCTRL_PHYE | PHYCTRL_PXE);
out_be32(pdata->regs + USBGENCTRL, reg);
}
return 0;
}
static void fsl_usb2_mpc5121_exit(struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
pdata->regs = NULL;
if (pdata->clk) {
clk_disable(pdata->clk);
clk_put(pdata->clk);
}
}
struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
.big_endian_desc = 1,
.big_endian_mmio = 1,
.es = 1,
.le_setup_buf = 1,
.init = fsl_usb2_mpc5121_init,
.exit = fsl_usb2_mpc5121_exit,
};
#endif /* CONFIG_PPC_MPC512x */
static const struct of_device_id fsl_usb2_mph_dr_of_match[] = {
{ .compatible = "fsl-usb2-mph", },
{ .compatible = "fsl-usb2-dr", },
#ifdef CONFIG_PPC_MPC512x
{ .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, },
#endif
{},
};
static struct platform_driver fsl_usb2_mph_dr_driver = {
.driver = {
.name = "fsl-usb2-mph-dr",
.owner = THIS_MODULE,
.of_match_table = fsl_usb2_mph_dr_of_match,
},
.probe = fsl_usb2_mph_dr_of_probe,
.remove = __devexit_p(fsl_usb2_mph_dr_of_remove),
};
static int __init fsl_usb2_mph_dr_init(void)
{
return platform_driver_register(&fsl_usb2_mph_dr_driver);
}
module_init(fsl_usb2_mph_dr_init);
static void __exit fsl_usb2_mph_dr_exit(void)
{
platform_driver_unregister(&fsl_usb2_mph_dr_driver);
}
module_exit(fsl_usb2_mph_dr_exit);
MODULE_DESCRIPTION("FSL MPH DR OF devices driver");
MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
MODULE_LICENSE("GPL");