ced07371d9
cx18: Fix write retries for registers that always change - part 3. Fix the io for the rest of the registers that will often not read back the value just written. Modified register readback checks to make sure the intended effect was achieved without constantly rewriting the registers. The one outstanding register remaining is 0xc72014 CX18_AUDIO_ENABLE, whose behavior on writes I have yet to determine. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
149 lines
4.7 KiB
C
149 lines
4.7 KiB
C
/*
|
|
* cx18 ADEC firmware functions
|
|
*
|
|
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA.
|
|
*/
|
|
|
|
#include "cx18-driver.h"
|
|
#include "cx18-io.h"
|
|
#include <linux/firmware.h>
|
|
|
|
#define CX18_AUDIO_ENABLE 0xc72014
|
|
#define FWFILE "v4l-cx23418-dig.fw"
|
|
|
|
int cx18_av_loadfw(struct cx18 *cx)
|
|
{
|
|
const struct firmware *fw = NULL;
|
|
u32 size;
|
|
u32 v;
|
|
const u8 *ptr;
|
|
int i;
|
|
int retries1 = 0;
|
|
|
|
if (request_firmware(&fw, FWFILE, &cx->dev->dev) != 0) {
|
|
CX18_ERR("unable to open firmware %s\n", FWFILE);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The firmware load often has byte errors, so allow for several
|
|
retries, both at byte level and at the firmware load level. */
|
|
while (retries1 < 5) {
|
|
cx18_av_write4_expect(cx, CXADEC_CHIP_CTRL, 0x00010000,
|
|
0x00008430, 0xffffffff); /* cx25843 */
|
|
cx18_av_write_expect(cx, CXADEC_STD_DET_CTL, 0xf6, 0xf6, 0xff);
|
|
|
|
/* Reset the Mako core, Register is alias of CXADEC_CHIP_CTRL */
|
|
cx18_av_write4_expect(cx, 0x8100, 0x00010000,
|
|
0x00008430, 0xffffffff); /* cx25843 */
|
|
|
|
/* Put the 8051 in reset and enable firmware upload */
|
|
cx18_av_write4_noretry(cx, CXADEC_DL_CTL, 0x0F000000);
|
|
|
|
ptr = fw->data;
|
|
size = fw->size;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16);
|
|
u32 value = 0;
|
|
int retries2;
|
|
int unrec_err = 0;
|
|
|
|
for (retries2 = 0; retries2 < CX18_MAX_MMIO_RETRIES;
|
|
retries2++) {
|
|
cx18_av_write4_noretry(cx, CXADEC_DL_CTL,
|
|
dl_control);
|
|
udelay(10);
|
|
value = cx18_av_read4_noretry(cx,
|
|
CXADEC_DL_CTL);
|
|
if (value == dl_control)
|
|
break;
|
|
/* Check if we can correct the byte by changing
|
|
the address. We can only write the lower
|
|
address byte of the address. */
|
|
if ((value & 0x3F00) != (dl_control & 0x3F00)) {
|
|
unrec_err = 1;
|
|
break;
|
|
}
|
|
}
|
|
cx18_log_write_retries(cx, retries2,
|
|
cx->reg_mem + 0xc40000 + CXADEC_DL_CTL);
|
|
if (unrec_err || retries2 >= CX18_MAX_MMIO_RETRIES)
|
|
break;
|
|
}
|
|
if (i == size)
|
|
break;
|
|
retries1++;
|
|
}
|
|
if (retries1 >= 5) {
|
|
CX18_ERR("unable to load firmware %s\n", FWFILE);
|
|
release_firmware(fw);
|
|
return -EIO;
|
|
}
|
|
|
|
cx18_av_write4_expect(cx, CXADEC_DL_CTL,
|
|
0x13000000 | fw->size, 0x13000000, 0x13000000);
|
|
|
|
/* Output to the 416 */
|
|
cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x78000);
|
|
|
|
/* Audio input control 1 set to Sony mode */
|
|
/* Audio output input 2 is 0 for slave operation input */
|
|
/* 0xC4000914[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */
|
|
/* 0xC4000914[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge
|
|
after WS transition for first bit of audio word. */
|
|
cx18_av_write4(cx, CXADEC_I2S_IN_CTL, 0x000000A0);
|
|
|
|
/* Audio output control 1 is set to Sony mode */
|
|
/* Audio output control 2 is set to 1 for master mode */
|
|
/* 0xC4000918[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */
|
|
/* 0xC4000918[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge
|
|
after WS transition for first bit of audio word. */
|
|
/* 0xC4000918[8]: 0 = slave operation, 1 = master (SCK_OUT and WS_OUT
|
|
are generated) */
|
|
cx18_av_write4(cx, CXADEC_I2S_OUT_CTL, 0x000001A0);
|
|
|
|
/* set alt I2s master clock to /16 and enable alt divider i2s
|
|
passthrough */
|
|
cx18_av_write4(cx, CXADEC_PIN_CFG3, 0x5000B687);
|
|
|
|
cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, 0x000000F6, 0x000000F6,
|
|
0x3F00FFFF);
|
|
/* CxDevWrReg(CXADEC_STD_DET_CTL, 0x000000FF); */
|
|
|
|
/* Set bit 0 in register 0x9CC to signify that this is MiniMe. */
|
|
/* Register 0x09CC is defined by the Merlin firmware, and doesn't
|
|
have a name in the spec. */
|
|
cx18_av_write4(cx, 0x09CC, 1);
|
|
|
|
v = cx18_read_reg(cx, CX18_AUDIO_ENABLE);
|
|
/* If bit 11 is 1, clear bit 10 */
|
|
if (v & 0x800)
|
|
cx18_write_reg(cx, v & 0xFFFFFBFF, CX18_AUDIO_ENABLE);
|
|
|
|
/* Enable WW auto audio standard detection */
|
|
v = cx18_av_read4(cx, CXADEC_STD_DET_CTL);
|
|
v |= 0xFF; /* Auto by default */
|
|
v |= 0x400; /* Stereo by default */
|
|
v |= 0x14000000;
|
|
cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, v, v, 0x3F00FFFF);
|
|
|
|
release_firmware(fw);
|
|
|
|
CX18_INFO("loaded %s firmware (%d bytes)\n", FWFILE, size);
|
|
return 0;
|
|
}
|