d96be879ff
This patch adds a MX2/MX3 specific SDHC driver. The hardware is basically the same as in the MX1, but unlike the MX1 controller the MX2 controller just works as expected. Since the MX1 driver has more workarounds for bugs than anything else I had no success with supporting MX1 and MX2 in a sane way in one driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
880 lines
20 KiB
C
880 lines
20 KiB
C
/*
|
|
* linux/drivers/mmc/host/mxcmmc.c - Freescale i.MX MMCI driver
|
|
*
|
|
* This is a driver for the SDHC controller found in Freescale MX2/MX3
|
|
* SoCs. It is basically the same hardware as found on MX1 (imxmmc.c).
|
|
* Unlike the hardware found on MX1, this hardware just works and does
|
|
* not need all the quirks found in imxmmc.c, hence the seperate driver.
|
|
*
|
|
* Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
|
|
* Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
|
|
*
|
|
* derived from pxamci.c by Russell King
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <asm/dma.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/sizes.h>
|
|
#include <mach/mmc.h>
|
|
|
|
#ifdef CONFIG_ARCH_MX2
|
|
#include <mach/dma-mx1-mx2.h>
|
|
#define HAS_DMA
|
|
#endif
|
|
|
|
#define DRIVER_NAME "imx-mmc"
|
|
|
|
#define MMC_REG_STR_STP_CLK 0x00
|
|
#define MMC_REG_STATUS 0x04
|
|
#define MMC_REG_CLK_RATE 0x08
|
|
#define MMC_REG_CMD_DAT_CONT 0x0C
|
|
#define MMC_REG_RES_TO 0x10
|
|
#define MMC_REG_READ_TO 0x14
|
|
#define MMC_REG_BLK_LEN 0x18
|
|
#define MMC_REG_NOB 0x1C
|
|
#define MMC_REG_REV_NO 0x20
|
|
#define MMC_REG_INT_CNTR 0x24
|
|
#define MMC_REG_CMD 0x28
|
|
#define MMC_REG_ARG 0x2C
|
|
#define MMC_REG_RES_FIFO 0x34
|
|
#define MMC_REG_BUFFER_ACCESS 0x38
|
|
|
|
#define STR_STP_CLK_RESET (1 << 3)
|
|
#define STR_STP_CLK_START_CLK (1 << 1)
|
|
#define STR_STP_CLK_STOP_CLK (1 << 0)
|
|
|
|
#define STATUS_CARD_INSERTION (1 << 31)
|
|
#define STATUS_CARD_REMOVAL (1 << 30)
|
|
#define STATUS_YBUF_EMPTY (1 << 29)
|
|
#define STATUS_XBUF_EMPTY (1 << 28)
|
|
#define STATUS_YBUF_FULL (1 << 27)
|
|
#define STATUS_XBUF_FULL (1 << 26)
|
|
#define STATUS_BUF_UND_RUN (1 << 25)
|
|
#define STATUS_BUF_OVFL (1 << 24)
|
|
#define STATUS_SDIO_INT_ACTIVE (1 << 14)
|
|
#define STATUS_END_CMD_RESP (1 << 13)
|
|
#define STATUS_WRITE_OP_DONE (1 << 12)
|
|
#define STATUS_DATA_TRANS_DONE (1 << 11)
|
|
#define STATUS_READ_OP_DONE (1 << 11)
|
|
#define STATUS_WR_CRC_ERROR_CODE_MASK (3 << 10)
|
|
#define STATUS_CARD_BUS_CLK_RUN (1 << 8)
|
|
#define STATUS_BUF_READ_RDY (1 << 7)
|
|
#define STATUS_BUF_WRITE_RDY (1 << 6)
|
|
#define STATUS_RESP_CRC_ERR (1 << 5)
|
|
#define STATUS_CRC_READ_ERR (1 << 3)
|
|
#define STATUS_CRC_WRITE_ERR (1 << 2)
|
|
#define STATUS_TIME_OUT_RESP (1 << 1)
|
|
#define STATUS_TIME_OUT_READ (1 << 0)
|
|
#define STATUS_ERR_MASK 0x2f
|
|
|
|
#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1 << 12)
|
|
#define CMD_DAT_CONT_STOP_READWAIT (1 << 11)
|
|
#define CMD_DAT_CONT_START_READWAIT (1 << 10)
|
|
#define CMD_DAT_CONT_BUS_WIDTH_4 (2 << 8)
|
|
#define CMD_DAT_CONT_INIT (1 << 7)
|
|
#define CMD_DAT_CONT_WRITE (1 << 4)
|
|
#define CMD_DAT_CONT_DATA_ENABLE (1 << 3)
|
|
#define CMD_DAT_CONT_RESPONSE_48BIT_CRC (1 << 0)
|
|
#define CMD_DAT_CONT_RESPONSE_136BIT (2 << 0)
|
|
#define CMD_DAT_CONT_RESPONSE_48BIT (3 << 0)
|
|
|
|
#define INT_SDIO_INT_WKP_EN (1 << 18)
|
|
#define INT_CARD_INSERTION_WKP_EN (1 << 17)
|
|
#define INT_CARD_REMOVAL_WKP_EN (1 << 16)
|
|
#define INT_CARD_INSERTION_EN (1 << 15)
|
|
#define INT_CARD_REMOVAL_EN (1 << 14)
|
|
#define INT_SDIO_IRQ_EN (1 << 13)
|
|
#define INT_DAT0_EN (1 << 12)
|
|
#define INT_BUF_READ_EN (1 << 4)
|
|
#define INT_BUF_WRITE_EN (1 << 3)
|
|
#define INT_END_CMD_RES_EN (1 << 2)
|
|
#define INT_WRITE_OP_DONE_EN (1 << 1)
|
|
#define INT_READ_OP_EN (1 << 0)
|
|
|
|
struct mxcmci_host {
|
|
struct mmc_host *mmc;
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
int irq;
|
|
int detect_irq;
|
|
int dma;
|
|
int do_dma;
|
|
unsigned int power_mode;
|
|
struct imxmmc_platform_data *pdata;
|
|
|
|
struct mmc_request *req;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
|
|
unsigned int dma_nents;
|
|
unsigned int datasize;
|
|
unsigned int dma_dir;
|
|
|
|
u16 rev_no;
|
|
unsigned int cmdat;
|
|
|
|
struct clk *clk;
|
|
|
|
int clock;
|
|
|
|
struct work_struct datawork;
|
|
};
|
|
|
|
static inline int mxcmci_use_dma(struct mxcmci_host *host)
|
|
{
|
|
return host->do_dma;
|
|
}
|
|
|
|
static void mxcmci_softreset(struct mxcmci_host *host)
|
|
{
|
|
int i;
|
|
|
|
/* reset sequence */
|
|
writew(STR_STP_CLK_RESET, host->base + MMC_REG_STR_STP_CLK);
|
|
writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK,
|
|
host->base + MMC_REG_STR_STP_CLK);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
|
|
|
|
writew(0xff, host->base + MMC_REG_RES_TO);
|
|
}
|
|
|
|
static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
|
|
{
|
|
unsigned int nob = data->blocks;
|
|
unsigned int blksz = data->blksz;
|
|
unsigned int datasize = nob * blksz;
|
|
#ifdef HAS_DMA
|
|
struct scatterlist *sg;
|
|
int i;
|
|
#endif
|
|
if (data->flags & MMC_DATA_STREAM)
|
|
nob = 0xffff;
|
|
|
|
host->data = data;
|
|
data->bytes_xfered = 0;
|
|
|
|
writew(nob, host->base + MMC_REG_NOB);
|
|
writew(blksz, host->base + MMC_REG_BLK_LEN);
|
|
host->datasize = datasize;
|
|
|
|
#ifdef HAS_DMA
|
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
|
if (sg->offset & 3 || sg->length & 3) {
|
|
host->do_dma = 0;
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
host->dma_dir = DMA_FROM_DEVICE;
|
|
host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
|
|
data->sg_len, host->dma_dir);
|
|
|
|
imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
|
|
host->res->start + MMC_REG_BUFFER_ACCESS,
|
|
DMA_MODE_READ);
|
|
} else {
|
|
host->dma_dir = DMA_TO_DEVICE;
|
|
host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
|
|
data->sg_len, host->dma_dir);
|
|
|
|
imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
|
|
host->res->start + MMC_REG_BUFFER_ACCESS,
|
|
DMA_MODE_WRITE);
|
|
}
|
|
|
|
wmb();
|
|
|
|
imx_dma_enable(host->dma);
|
|
#endif /* HAS_DMA */
|
|
}
|
|
|
|
static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
|
|
unsigned int cmdat)
|
|
{
|
|
WARN_ON(host->cmd != NULL);
|
|
host->cmd = cmd;
|
|
|
|
switch (mmc_resp_type(cmd)) {
|
|
case MMC_RSP_R1: /* short CRC, OPCODE */
|
|
case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */
|
|
cmdat |= CMD_DAT_CONT_RESPONSE_48BIT_CRC;
|
|
break;
|
|
case MMC_RSP_R2: /* long 136 bit + CRC */
|
|
cmdat |= CMD_DAT_CONT_RESPONSE_136BIT;
|
|
break;
|
|
case MMC_RSP_R3: /* short */
|
|
cmdat |= CMD_DAT_CONT_RESPONSE_48BIT;
|
|
break;
|
|
case MMC_RSP_NONE:
|
|
break;
|
|
default:
|
|
dev_err(mmc_dev(host->mmc), "unhandled response type 0x%x\n",
|
|
mmc_resp_type(cmd));
|
|
cmd->error = -EINVAL;
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (mxcmci_use_dma(host))
|
|
writel(INT_READ_OP_EN | INT_WRITE_OP_DONE_EN |
|
|
INT_END_CMD_RES_EN,
|
|
host->base + MMC_REG_INT_CNTR);
|
|
else
|
|
writel(INT_END_CMD_RES_EN, host->base + MMC_REG_INT_CNTR);
|
|
|
|
writew(cmd->opcode, host->base + MMC_REG_CMD);
|
|
writel(cmd->arg, host->base + MMC_REG_ARG);
|
|
writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxcmci_finish_request(struct mxcmci_host *host,
|
|
struct mmc_request *req)
|
|
{
|
|
writel(0, host->base + MMC_REG_INT_CNTR);
|
|
|
|
host->req = NULL;
|
|
host->cmd = NULL;
|
|
host->data = NULL;
|
|
|
|
mmc_request_done(host->mmc, req);
|
|
}
|
|
|
|
static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
int data_error;
|
|
|
|
#ifdef HAS_DMA
|
|
if (mxcmci_use_dma(host)) {
|
|
imx_dma_disable(host->dma);
|
|
dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents,
|
|
host->dma_dir);
|
|
}
|
|
#endif
|
|
|
|
if (stat & STATUS_ERR_MASK) {
|
|
dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",
|
|
stat);
|
|
if (stat & STATUS_CRC_READ_ERR) {
|
|
data->error = -EILSEQ;
|
|
} else if (stat & STATUS_CRC_WRITE_ERR) {
|
|
u32 err_code = (stat >> 9) & 0x3;
|
|
if (err_code == 2) /* No CRC response */
|
|
data->error = -ETIMEDOUT;
|
|
else
|
|
data->error = -EILSEQ;
|
|
} else if (stat & STATUS_TIME_OUT_READ) {
|
|
data->error = -ETIMEDOUT;
|
|
} else {
|
|
data->error = -EIO;
|
|
}
|
|
} else {
|
|
data->bytes_xfered = host->datasize;
|
|
}
|
|
|
|
data_error = data->error;
|
|
|
|
host->data = NULL;
|
|
|
|
return data_error;
|
|
}
|
|
|
|
static void mxcmci_read_response(struct mxcmci_host *host, unsigned int stat)
|
|
{
|
|
struct mmc_command *cmd = host->cmd;
|
|
int i;
|
|
u32 a, b, c;
|
|
|
|
if (!cmd)
|
|
return;
|
|
|
|
if (stat & STATUS_TIME_OUT_RESP) {
|
|
dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n");
|
|
cmd->error = -ETIMEDOUT;
|
|
} else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
|
|
dev_dbg(mmc_dev(host->mmc), "cmd crc error\n");
|
|
cmd->error = -EILSEQ;
|
|
}
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136) {
|
|
for (i = 0; i < 4; i++) {
|
|
a = readw(host->base + MMC_REG_RES_FIFO);
|
|
b = readw(host->base + MMC_REG_RES_FIFO);
|
|
cmd->resp[i] = a << 16 | b;
|
|
}
|
|
} else {
|
|
a = readw(host->base + MMC_REG_RES_FIFO);
|
|
b = readw(host->base + MMC_REG_RES_FIFO);
|
|
c = readw(host->base + MMC_REG_RES_FIFO);
|
|
cmd->resp[0] = a << 24 | b << 8 | c >> 8;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask)
|
|
{
|
|
u32 stat;
|
|
unsigned long timeout = jiffies + HZ;
|
|
|
|
do {
|
|
stat = readl(host->base + MMC_REG_STATUS);
|
|
if (stat & STATUS_ERR_MASK)
|
|
return stat;
|
|
if (time_after(jiffies, timeout))
|
|
return STATUS_TIME_OUT_READ;
|
|
if (stat & mask)
|
|
return 0;
|
|
cpu_relax();
|
|
} while (1);
|
|
}
|
|
|
|
static int mxcmci_pull(struct mxcmci_host *host, void *_buf, int bytes)
|
|
{
|
|
unsigned int stat;
|
|
u32 *buf = _buf;
|
|
|
|
while (bytes > 3) {
|
|
stat = mxcmci_poll_status(host,
|
|
STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
|
|
if (stat)
|
|
return stat;
|
|
*buf++ = readl(host->base + MMC_REG_BUFFER_ACCESS);
|
|
bytes -= 4;
|
|
}
|
|
|
|
if (bytes) {
|
|
u8 *b = (u8 *)buf;
|
|
u32 tmp;
|
|
|
|
stat = mxcmci_poll_status(host,
|
|
STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
|
|
if (stat)
|
|
return stat;
|
|
tmp = readl(host->base + MMC_REG_BUFFER_ACCESS);
|
|
memcpy(b, &tmp, bytes);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxcmci_push(struct mxcmci_host *host, void *_buf, int bytes)
|
|
{
|
|
unsigned int stat;
|
|
u32 *buf = _buf;
|
|
|
|
while (bytes > 3) {
|
|
stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
|
|
if (stat)
|
|
return stat;
|
|
writel(*buf++, host->base + MMC_REG_BUFFER_ACCESS);
|
|
bytes -= 4;
|
|
}
|
|
|
|
if (bytes) {
|
|
u8 *b = (u8 *)buf;
|
|
u32 tmp;
|
|
|
|
stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
|
|
if (stat)
|
|
return stat;
|
|
|
|
memcpy(&tmp, b, bytes);
|
|
writel(tmp, host->base + MMC_REG_BUFFER_ACCESS);
|
|
}
|
|
|
|
stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
|
|
if (stat)
|
|
return stat;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxcmci_transfer_data(struct mxcmci_host *host)
|
|
{
|
|
struct mmc_data *data = host->req->data;
|
|
struct scatterlist *sg;
|
|
int stat, i;
|
|
|
|
host->datasize = 0;
|
|
|
|
host->data = data;
|
|
host->datasize = 0;
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
|
stat = mxcmci_pull(host, sg_virt(sg), sg->length);
|
|
if (stat)
|
|
return stat;
|
|
host->datasize += sg->length;
|
|
}
|
|
} else {
|
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
|
stat = mxcmci_push(host, sg_virt(sg), sg->length);
|
|
if (stat)
|
|
return stat;
|
|
host->datasize += sg->length;
|
|
}
|
|
stat = mxcmci_poll_status(host, STATUS_WRITE_OP_DONE);
|
|
if (stat)
|
|
return stat;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void mxcmci_datawork(struct work_struct *work)
|
|
{
|
|
struct mxcmci_host *host = container_of(work, struct mxcmci_host,
|
|
datawork);
|
|
int datastat = mxcmci_transfer_data(host);
|
|
mxcmci_finish_data(host, datastat);
|
|
|
|
if (host->req->stop) {
|
|
if (mxcmci_start_cmd(host, host->req->stop, 0)) {
|
|
mxcmci_finish_request(host, host->req);
|
|
return;
|
|
}
|
|
} else {
|
|
mxcmci_finish_request(host, host->req);
|
|
}
|
|
}
|
|
|
|
#ifdef HAS_DMA
|
|
static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
int data_error;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
data_error = mxcmci_finish_data(host, stat);
|
|
|
|
mxcmci_read_response(host, stat);
|
|
host->cmd = NULL;
|
|
|
|
if (host->req->stop) {
|
|
if (mxcmci_start_cmd(host, host->req->stop, 0)) {
|
|
mxcmci_finish_request(host, host->req);
|
|
return;
|
|
}
|
|
} else {
|
|
mxcmci_finish_request(host, host->req);
|
|
}
|
|
}
|
|
#endif /* HAS_DMA */
|
|
|
|
static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat)
|
|
{
|
|
mxcmci_read_response(host, stat);
|
|
host->cmd = NULL;
|
|
|
|
if (!host->data && host->req) {
|
|
mxcmci_finish_request(host, host->req);
|
|
return;
|
|
}
|
|
|
|
/* For the DMA case the DMA engine handles the data transfer
|
|
* automatically. For non DMA we have to to it ourselves.
|
|
* Don't do it in interrupt context though.
|
|
*/
|
|
if (!mxcmci_use_dma(host) && host->data)
|
|
schedule_work(&host->datawork);
|
|
|
|
}
|
|
|
|
static irqreturn_t mxcmci_irq(int irq, void *devid)
|
|
{
|
|
struct mxcmci_host *host = devid;
|
|
u32 stat;
|
|
|
|
stat = readl(host->base + MMC_REG_STATUS);
|
|
writel(stat, host->base + MMC_REG_STATUS);
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat);
|
|
|
|
if (stat & STATUS_END_CMD_RESP)
|
|
mxcmci_cmd_done(host, stat);
|
|
#ifdef HAS_DMA
|
|
if (mxcmci_use_dma(host) &&
|
|
(stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))
|
|
mxcmci_data_done(host, stat);
|
|
#endif
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req)
|
|
{
|
|
struct mxcmci_host *host = mmc_priv(mmc);
|
|
unsigned int cmdat = host->cmdat;
|
|
|
|
WARN_ON(host->req != NULL);
|
|
|
|
host->req = req;
|
|
host->cmdat &= ~CMD_DAT_CONT_INIT;
|
|
#ifdef HAS_DMA
|
|
host->do_dma = 1;
|
|
#endif
|
|
if (req->data) {
|
|
mxcmci_setup_data(host, req->data);
|
|
|
|
cmdat |= CMD_DAT_CONT_DATA_ENABLE;
|
|
|
|
if (req->data->flags & MMC_DATA_WRITE)
|
|
cmdat |= CMD_DAT_CONT_WRITE;
|
|
}
|
|
|
|
if (mxcmci_start_cmd(host, req->cmd, cmdat))
|
|
mxcmci_finish_request(host, req);
|
|
}
|
|
|
|
static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
|
|
{
|
|
unsigned int divider;
|
|
int prescaler = 0;
|
|
unsigned int clk_in = clk_get_rate(host->clk);
|
|
|
|
while (prescaler <= 0x800) {
|
|
for (divider = 1; divider <= 0xF; divider++) {
|
|
int x;
|
|
|
|
x = (clk_in / (divider + 1));
|
|
|
|
if (prescaler)
|
|
x /= (prescaler * 2);
|
|
|
|
if (x <= clk_ios)
|
|
break;
|
|
}
|
|
if (divider < 0x10)
|
|
break;
|
|
|
|
if (prescaler == 0)
|
|
prescaler = 1;
|
|
else
|
|
prescaler <<= 1;
|
|
}
|
|
|
|
writew((prescaler << 4) | divider, host->base + MMC_REG_CLK_RATE);
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "scaler: %d divider: %d in: %d out: %d\n",
|
|
prescaler, divider, clk_in, clk_ios);
|
|
}
|
|
|
|
static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct mxcmci_host *host = mmc_priv(mmc);
|
|
#ifdef HAS_DMA
|
|
unsigned int blen;
|
|
/*
|
|
* use burstlen of 64 in 4 bit mode (--> reg value 0)
|
|
* use burstlen of 16 in 1 bit mode (--> reg value 16)
|
|
*/
|
|
if (ios->bus_width == MMC_BUS_WIDTH_4)
|
|
blen = 0;
|
|
else
|
|
blen = 16;
|
|
|
|
imx_dma_config_burstlen(host->dma, blen);
|
|
#endif
|
|
if (ios->bus_width == MMC_BUS_WIDTH_4)
|
|
host->cmdat |= CMD_DAT_CONT_BUS_WIDTH_4;
|
|
else
|
|
host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
|
|
|
|
if (host->power_mode != ios->power_mode) {
|
|
if (host->pdata && host->pdata->setpower)
|
|
host->pdata->setpower(mmc_dev(mmc), ios->vdd);
|
|
host->power_mode = ios->power_mode;
|
|
if (ios->power_mode == MMC_POWER_ON)
|
|
host->cmdat |= CMD_DAT_CONT_INIT;
|
|
}
|
|
|
|
if (ios->clock) {
|
|
mxcmci_set_clk_rate(host, ios->clock);
|
|
writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
|
|
} else {
|
|
writew(STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK);
|
|
}
|
|
|
|
host->clock = ios->clock;
|
|
}
|
|
|
|
static irqreturn_t mxcmci_detect_irq(int irq, void *data)
|
|
{
|
|
struct mmc_host *mmc = data;
|
|
|
|
dev_dbg(mmc_dev(mmc), "%s\n", __func__);
|
|
|
|
mmc_detect_change(mmc, msecs_to_jiffies(250));
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mxcmci_get_ro(struct mmc_host *mmc)
|
|
{
|
|
struct mxcmci_host *host = mmc_priv(mmc);
|
|
|
|
if (host->pdata && host->pdata->get_ro)
|
|
return !!host->pdata->get_ro(mmc_dev(mmc));
|
|
/*
|
|
* Board doesn't support read only detection; let the mmc core
|
|
* decide what to do.
|
|
*/
|
|
return -ENOSYS;
|
|
}
|
|
|
|
|
|
static const struct mmc_host_ops mxcmci_ops = {
|
|
.request = mxcmci_request,
|
|
.set_ios = mxcmci_set_ios,
|
|
.get_ro = mxcmci_get_ro,
|
|
};
|
|
|
|
static int mxcmci_probe(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc;
|
|
struct mxcmci_host *host = NULL;
|
|
struct resource *r;
|
|
int ret = 0, irq;
|
|
|
|
printk(KERN_INFO "i.MX SDHC driver\n");
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (!r || irq < 0)
|
|
return -EINVAL;
|
|
|
|
r = request_mem_region(r->start, resource_size(r), pdev->name);
|
|
if (!r)
|
|
return -EBUSY;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev);
|
|
if (!mmc) {
|
|
ret = -ENOMEM;
|
|
goto out_release_mem;
|
|
}
|
|
|
|
mmc->ops = &mxcmci_ops;
|
|
mmc->caps = MMC_CAP_4_BIT_DATA;
|
|
|
|
/* MMC core transfer sizes tunable parameters */
|
|
mmc->max_hw_segs = 64;
|
|
mmc->max_phys_segs = 64;
|
|
mmc->max_blk_size = 2048;
|
|
mmc->max_blk_count = 65535;
|
|
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
|
|
mmc->max_seg_size = mmc->max_seg_size;
|
|
|
|
host = mmc_priv(mmc);
|
|
host->base = ioremap(r->start, resource_size(r));
|
|
if (!host->base) {
|
|
ret = -ENOMEM;
|
|
goto out_free;
|
|
}
|
|
|
|
host->mmc = mmc;
|
|
host->pdata = pdev->dev.platform_data;
|
|
|
|
if (host->pdata && host->pdata->ocr_avail)
|
|
mmc->ocr_avail = host->pdata->ocr_avail;
|
|
else
|
|
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
host->res = r;
|
|
host->irq = irq;
|
|
|
|
host->clk = clk_get(&pdev->dev, "sdhc_clk");
|
|
if (IS_ERR(host->clk)) {
|
|
ret = PTR_ERR(host->clk);
|
|
goto out_iounmap;
|
|
}
|
|
clk_enable(host->clk);
|
|
|
|
mxcmci_softreset(host);
|
|
|
|
host->rev_no = readw(host->base + MMC_REG_REV_NO);
|
|
if (host->rev_no != 0x400) {
|
|
ret = -ENODEV;
|
|
dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n",
|
|
host->rev_no);
|
|
goto out_clk_put;
|
|
}
|
|
|
|
mmc->f_min = clk_get_rate(host->clk) >> 7;
|
|
mmc->f_max = clk_get_rate(host->clk) >> 1;
|
|
|
|
/* recommended in data sheet */
|
|
writew(0x2db4, host->base + MMC_REG_READ_TO);
|
|
|
|
writel(0, host->base + MMC_REG_INT_CNTR);
|
|
|
|
#ifdef HAS_DMA
|
|
host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW);
|
|
if (host->dma < 0) {
|
|
dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n");
|
|
ret = -EBUSY;
|
|
goto out_clk_put;
|
|
}
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
|
|
if (!r) {
|
|
ret = -EINVAL;
|
|
goto out_free_dma;
|
|
}
|
|
|
|
ret = imx_dma_config_channel(host->dma,
|
|
IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO,
|
|
IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
|
|
r->start, 0);
|
|
if (ret) {
|
|
dev_err(mmc_dev(host->mmc), "failed to config DMA channel\n");
|
|
goto out_free_dma;
|
|
}
|
|
#endif
|
|
INIT_WORK(&host->datawork, mxcmci_datawork);
|
|
|
|
ret = request_irq(host->irq, mxcmci_irq, 0, DRIVER_NAME, host);
|
|
if (ret)
|
|
goto out_free_dma;
|
|
|
|
platform_set_drvdata(pdev, mmc);
|
|
|
|
if (host->pdata && host->pdata->init) {
|
|
ret = host->pdata->init(&pdev->dev, mxcmci_detect_irq,
|
|
host->mmc);
|
|
if (ret)
|
|
goto out_free_irq;
|
|
}
|
|
|
|
mmc_add_host(mmc);
|
|
|
|
return 0;
|
|
|
|
out_free_irq:
|
|
free_irq(host->irq, host);
|
|
out_free_dma:
|
|
#ifdef HAS_DMA
|
|
imx_dma_free(host->dma);
|
|
#endif
|
|
out_clk_put:
|
|
clk_disable(host->clk);
|
|
clk_put(host->clk);
|
|
out_iounmap:
|
|
iounmap(host->base);
|
|
out_free:
|
|
mmc_free_host(mmc);
|
|
out_release_mem:
|
|
release_mem_region(host->res->start, resource_size(host->res));
|
|
return ret;
|
|
}
|
|
|
|
static int mxcmci_remove(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
|
struct mxcmci_host *host = mmc_priv(mmc);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
mmc_remove_host(mmc);
|
|
|
|
if (host->pdata && host->pdata->exit)
|
|
host->pdata->exit(&pdev->dev, mmc);
|
|
|
|
free_irq(host->irq, host);
|
|
iounmap(host->base);
|
|
#ifdef HAS_DMA
|
|
imx_dma_free(host->dma);
|
|
#endif
|
|
clk_disable(host->clk);
|
|
clk_put(host->clk);
|
|
|
|
release_mem_region(host->res->start, resource_size(host->res));
|
|
release_resource(host->res);
|
|
|
|
mmc_free_host(mmc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int mxcmci_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
if (mmc)
|
|
ret = mmc_suspend_host(mmc, state);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxcmci_resume(struct platform_device *dev)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(dev);
|
|
struct mxcmci_host *host;
|
|
int ret = 0;
|
|
|
|
if (mmc) {
|
|
host = mmc_priv(mmc);
|
|
ret = mmc_resume_host(mmc);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#else
|
|
#define mxcmci_suspend NULL
|
|
#define mxcmci_resume NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct platform_driver mxcmci_driver = {
|
|
.probe = mxcmci_probe,
|
|
.remove = mxcmci_remove,
|
|
.suspend = mxcmci_suspend,
|
|
.resume = mxcmci_resume,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
}
|
|
};
|
|
|
|
static int __init mxcmci_init(void)
|
|
{
|
|
return platform_driver_register(&mxcmci_driver);
|
|
}
|
|
|
|
static void __exit mxcmci_exit(void)
|
|
{
|
|
platform_driver_unregister(&mxcmci_driver);
|
|
}
|
|
|
|
module_init(mxcmci_init);
|
|
module_exit(mxcmci_exit);
|
|
|
|
MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver");
|
|
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:imx-mmc");
|