6d39bedc47
There has been a longstanding problem with the Matrox G450 and perhaps other similar cards, with modes "above" 1280x1024-60 on ppc/ppc64 boxes running Linux. Higher resolutions and/or higher refresh rates resulted in a very noticably "jittery" display, and sometimes no display, depending on the physical monitor. This patch fixes that problem on the systems I have easy access to... I've tested with SLES9SP3 (2.6.5+ kernel) and 2.6.16-rc6 custom kernels on an IBM eServer p5 520 w/G450 (a.k.a GXT135P on IBM's ppc64 systems), and a colleague of mine (Ian Romanick) tested it successfully on an Apple ppc32 box (w/GXT135P). I also tested it on IA32 box I have with a GXT135P to verify that it didn't obviously break anything. In my testing, I covered single-card, single and dual-head setups using both HD15 and DVI-D signals, on both the IA32 and ppc64 boxes. While everything appeared fine on both boxes, I did encounter one problem: I can't get any signal on the DVI-D output on the ppc64 box. However, this is also the case without my patch. I just noticed that screen-blanking only occurs on the primary display as well. Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Signed-off-by: Ian Romanick <idr@us.ibm.com> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> |
||
---|---|---|
.. | ||
acorn | ||
acpi | ||
amba | ||
atm | ||
base | ||
block | ||
bluetooth | ||
cdrom | ||
char | ||
connector | ||
cpufreq | ||
crypto | ||
dio | ||
edac | ||
eisa | ||
fc4 | ||
firmware | ||
hwmon | ||
i2c | ||
ide | ||
ieee1394 | ||
infiniband | ||
input | ||
isdn | ||
leds | ||
macintosh | ||
mca | ||
md | ||
media | ||
message | ||
mfd | ||
misc | ||
mmc | ||
mtd | ||
net | ||
nubus | ||
oprofile | ||
parisc | ||
parport | ||
pci | ||
pcmcia | ||
pnp | ||
rapidio | ||
rtc | ||
s390 | ||
sbus | ||
scsi | ||
serial | ||
sh | ||
sn | ||
spi | ||
tc | ||
telephony | ||
usb | ||
video | ||
w1 | ||
zorro | ||
Kconfig | ||
Makefile |