kernel-fxtec-pro1x/include/linux/if_link.h
Williams, Mitch A b280da8d54 if_link: Add SR-IOV configuration methods
Add SR-IOV VF management methods to IFLA_LINKINFO. This allows userspace to
use rtnetlink to configure VF network devices.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12 16:56:07 -08:00

229 lines
5.4 KiB
C

#ifndef _LINUX_IF_LINK_H
#define _LINUX_IF_LINK_H
#include <linux/types.h>
#include <linux/netlink.h>
/* The struct should be in sync with struct net_device_stats */
struct rtnl_link_stats {
__u32 rx_packets; /* total packets received */
__u32 tx_packets; /* total packets transmitted */
__u32 rx_bytes; /* total bytes received */
__u32 tx_bytes; /* total bytes transmitted */
__u32 rx_errors; /* bad packets received */
__u32 tx_errors; /* packet transmit problems */
__u32 rx_dropped; /* no space in linux buffers */
__u32 tx_dropped; /* no space available in linux */
__u32 multicast; /* multicast packets received */
__u32 collisions;
/* detailed rx_errors: */
__u32 rx_length_errors;
__u32 rx_over_errors; /* receiver ring buff overflow */
__u32 rx_crc_errors; /* recved pkt with crc error */
__u32 rx_frame_errors; /* recv'd frame alignment error */
__u32 rx_fifo_errors; /* recv'r fifo overrun */
__u32 rx_missed_errors; /* receiver missed packet */
/* detailed tx_errors */
__u32 tx_aborted_errors;
__u32 tx_carrier_errors;
__u32 tx_fifo_errors;
__u32 tx_heartbeat_errors;
__u32 tx_window_errors;
/* for cslip etc */
__u32 rx_compressed;
__u32 tx_compressed;
};
/* The struct should be in sync with struct ifmap */
struct rtnl_link_ifmap {
__u64 mem_start;
__u64 mem_end;
__u64 base_addr;
__u16 irq;
__u8 dma;
__u8 port;
};
enum {
IFLA_UNSPEC,
IFLA_ADDRESS,
IFLA_BROADCAST,
IFLA_IFNAME,
IFLA_MTU,
IFLA_LINK,
IFLA_QDISC,
IFLA_STATS,
IFLA_COST,
#define IFLA_COST IFLA_COST
IFLA_PRIORITY,
#define IFLA_PRIORITY IFLA_PRIORITY
IFLA_MASTER,
#define IFLA_MASTER IFLA_MASTER
IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */
#define IFLA_WIRELESS IFLA_WIRELESS
IFLA_PROTINFO, /* Protocol specific information for a link */
#define IFLA_PROTINFO IFLA_PROTINFO
IFLA_TXQLEN,
#define IFLA_TXQLEN IFLA_TXQLEN
IFLA_MAP,
#define IFLA_MAP IFLA_MAP
IFLA_WEIGHT,
#define IFLA_WEIGHT IFLA_WEIGHT
IFLA_OPERSTATE,
IFLA_LINKMODE,
IFLA_LINKINFO,
#define IFLA_LINKINFO IFLA_LINKINFO
IFLA_NET_NS_PID,
IFLA_IFALIAS,
IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */
IFLA_VF_MAC, /* Hardware queue specific attributes */
IFLA_VF_VLAN,
IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */
IFLA_VFINFO,
__IFLA_MAX
};
#define IFLA_MAX (__IFLA_MAX - 1)
/* backwards compatibility for userspace */
#ifndef __KERNEL__
#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
#endif
/* ifi_flags.
IFF_* flags.
The only change is:
IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
more not changeable by user. They describe link media
characteristics and set by device driver.
Comments:
- Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
- If neither of these three flags are set;
the interface is NBMA.
- IFF_MULTICAST does not mean anything special:
multicasts can be used on all not-NBMA links.
IFF_MULTICAST means that this media uses special encapsulation
for multicast frames. Apparently, all IFF_POINTOPOINT and
IFF_BROADCAST devices are able to use multicasts too.
*/
/* IFLA_LINK.
For usual devices it is equal ifi_index.
If it is a "virtual interface" (f.e. tunnel), ifi_link
can point to real physical interface (f.e. for bandwidth calculations),
or maybe 0, what means, that real media is unknown (usual
for IPIP tunnels, when route to endpoint is allowed to change)
*/
/* Subtype attributes for IFLA_PROTINFO */
enum {
IFLA_INET6_UNSPEC,
IFLA_INET6_FLAGS, /* link flags */
IFLA_INET6_CONF, /* sysctl parameters */
IFLA_INET6_STATS, /* statistics */
IFLA_INET6_MCAST, /* MC things. What of them? */
IFLA_INET6_CACHEINFO, /* time values and max reasm size */
IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */
__IFLA_INET6_MAX
};
#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1)
struct ifla_cacheinfo {
__u32 max_reasm_len;
__u32 tstamp; /* ipv6InterfaceTable updated timestamp */
__u32 reachable_time;
__u32 retrans_time;
};
enum {
IFLA_INFO_UNSPEC,
IFLA_INFO_KIND,
IFLA_INFO_DATA,
IFLA_INFO_XSTATS,
__IFLA_INFO_MAX,
};
#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1)
/* VLAN section */
enum {
IFLA_VLAN_UNSPEC,
IFLA_VLAN_ID,
IFLA_VLAN_FLAGS,
IFLA_VLAN_EGRESS_QOS,
IFLA_VLAN_INGRESS_QOS,
__IFLA_VLAN_MAX,
};
#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1)
struct ifla_vlan_flags {
__u32 flags;
__u32 mask;
};
enum {
IFLA_VLAN_QOS_UNSPEC,
IFLA_VLAN_QOS_MAPPING,
__IFLA_VLAN_QOS_MAX
};
#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1)
struct ifla_vlan_qos_mapping {
__u32 from;
__u32 to;
};
/* MACVLAN section */
enum {
IFLA_MACVLAN_UNSPEC,
IFLA_MACVLAN_MODE,
__IFLA_MACVLAN_MAX,
};
#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
enum macvlan_mode {
MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */
MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */
};
/* SR-IOV virtual function managment section */
struct ifla_vf_mac {
__u32 vf;
__u8 mac[32]; /* MAX_ADDR_LEN */
};
struct ifla_vf_vlan {
__u32 vf;
__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
__u32 qos;
};
struct ifla_vf_tx_rate {
__u32 vf;
__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
};
struct ifla_vf_info {
__u32 vf;
__u8 mac[32];
__u32 vlan;
__u32 qos;
__u32 tx_rate;
};
#endif /* _LINUX_IF_LINK_H */