348e3fd194
This is a simplified and actually more comprehensive form of a bug fix from Mitch Williams <mitch.a.williams@intel.com>. When we mask or unmask a msi-x irqs the writes may be posted because we are writing to memory mapped region. This means the mask and unmask don't happen immediately but at some unspecified time in the future. Which is out of sync with how the mask/unmask logic work for ioapic irqs. The practical result is that we get very subtle and hard to track down irq migration bugs. This patch performs a read flush after writes to the MSI-X table for mask and unmask operations. Since the SMP affinity is set while the interrupt is masked, and since it's unmasked immediately after, no additional flushes are required in the various affinity setting routines. The testing by Mitch Williams on his especially problematic system should still be valid as I have only simplified the code, not changed the functionality. We currently have 7 drivers: cciss, mthca, cxgb3, forceth, s2io, pcie/portdrv_core, and qla2xxx in 2.6.21 that are affected by this problem when the hardware they driver is plugged into the right slot. Given the difficulty of reproducing this bug and tracing it down to anything that even remotely resembles a cause, even if people are being affected we aren't likely to see many meaningful bug reports, and the people who see this bug aren't likely to be able to reproduce this bug in a timely fashion. So it is best to get this problem fixed as soon as we can so people don't have problems. Then if people do have a kernel message stating "No irq for vector" we will know it is yet another novel cause that needs a complete new investigation. Cc: Greg KH <greg@kroah.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
746 lines
19 KiB
C
746 lines
19 KiB
C
/*
|
|
* File: msi.c
|
|
* Purpose: PCI Message Signaled Interrupt (MSI)
|
|
*
|
|
* Copyright (C) 2003-2004 Intel
|
|
* Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/msi.h>
|
|
|
|
#include <asm/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/smp.h>
|
|
|
|
#include "pci.h"
|
|
#include "msi.h"
|
|
|
|
static struct kmem_cache* msi_cachep;
|
|
|
|
static int pci_msi_enable = 1;
|
|
|
|
static int msi_cache_init(void)
|
|
{
|
|
msi_cachep = kmem_cache_create("msi_cache", sizeof(struct msi_desc),
|
|
0, SLAB_HWCACHE_ALIGN, NULL, NULL);
|
|
if (!msi_cachep)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void msi_set_enable(struct pci_dev *dev, int enable)
|
|
{
|
|
int pos;
|
|
u16 control;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
|
|
if (pos) {
|
|
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
|
|
control &= ~PCI_MSI_FLAGS_ENABLE;
|
|
if (enable)
|
|
control |= PCI_MSI_FLAGS_ENABLE;
|
|
pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
|
|
}
|
|
}
|
|
|
|
static void msix_set_enable(struct pci_dev *dev, int enable)
|
|
{
|
|
int pos;
|
|
u16 control;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
|
|
if (pos) {
|
|
pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
|
|
control &= ~PCI_MSIX_FLAGS_ENABLE;
|
|
if (enable)
|
|
control |= PCI_MSIX_FLAGS_ENABLE;
|
|
pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
|
|
}
|
|
}
|
|
|
|
static void msi_set_mask_bit(unsigned int irq, int flag)
|
|
{
|
|
struct msi_desc *entry;
|
|
|
|
entry = get_irq_msi(irq);
|
|
BUG_ON(!entry || !entry->dev);
|
|
switch (entry->msi_attrib.type) {
|
|
case PCI_CAP_ID_MSI:
|
|
if (entry->msi_attrib.maskbit) {
|
|
int pos;
|
|
u32 mask_bits;
|
|
|
|
pos = (long)entry->mask_base;
|
|
pci_read_config_dword(entry->dev, pos, &mask_bits);
|
|
mask_bits &= ~(1);
|
|
mask_bits |= flag;
|
|
pci_write_config_dword(entry->dev, pos, mask_bits);
|
|
} else {
|
|
msi_set_enable(entry->dev, !flag);
|
|
}
|
|
break;
|
|
case PCI_CAP_ID_MSIX:
|
|
{
|
|
int offset = entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
|
|
PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET;
|
|
writel(flag, entry->mask_base + offset);
|
|
readl(entry->mask_base + offset);
|
|
break;
|
|
}
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
entry->msi_attrib.masked = !!flag;
|
|
}
|
|
|
|
void read_msi_msg(unsigned int irq, struct msi_msg *msg)
|
|
{
|
|
struct msi_desc *entry = get_irq_msi(irq);
|
|
switch(entry->msi_attrib.type) {
|
|
case PCI_CAP_ID_MSI:
|
|
{
|
|
struct pci_dev *dev = entry->dev;
|
|
int pos = entry->msi_attrib.pos;
|
|
u16 data;
|
|
|
|
pci_read_config_dword(dev, msi_lower_address_reg(pos),
|
|
&msg->address_lo);
|
|
if (entry->msi_attrib.is_64) {
|
|
pci_read_config_dword(dev, msi_upper_address_reg(pos),
|
|
&msg->address_hi);
|
|
pci_read_config_word(dev, msi_data_reg(pos, 1), &data);
|
|
} else {
|
|
msg->address_hi = 0;
|
|
pci_read_config_word(dev, msi_data_reg(pos, 1), &data);
|
|
}
|
|
msg->data = data;
|
|
break;
|
|
}
|
|
case PCI_CAP_ID_MSIX:
|
|
{
|
|
void __iomem *base;
|
|
base = entry->mask_base +
|
|
entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
|
|
|
|
msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
|
|
msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
|
|
msg->data = readl(base + PCI_MSIX_ENTRY_DATA_OFFSET);
|
|
break;
|
|
}
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
void write_msi_msg(unsigned int irq, struct msi_msg *msg)
|
|
{
|
|
struct msi_desc *entry = get_irq_msi(irq);
|
|
switch (entry->msi_attrib.type) {
|
|
case PCI_CAP_ID_MSI:
|
|
{
|
|
struct pci_dev *dev = entry->dev;
|
|
int pos = entry->msi_attrib.pos;
|
|
|
|
pci_write_config_dword(dev, msi_lower_address_reg(pos),
|
|
msg->address_lo);
|
|
if (entry->msi_attrib.is_64) {
|
|
pci_write_config_dword(dev, msi_upper_address_reg(pos),
|
|
msg->address_hi);
|
|
pci_write_config_word(dev, msi_data_reg(pos, 1),
|
|
msg->data);
|
|
} else {
|
|
pci_write_config_word(dev, msi_data_reg(pos, 0),
|
|
msg->data);
|
|
}
|
|
break;
|
|
}
|
|
case PCI_CAP_ID_MSIX:
|
|
{
|
|
void __iomem *base;
|
|
base = entry->mask_base +
|
|
entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
|
|
|
|
writel(msg->address_lo,
|
|
base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
|
|
writel(msg->address_hi,
|
|
base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
|
|
writel(msg->data, base + PCI_MSIX_ENTRY_DATA_OFFSET);
|
|
break;
|
|
}
|
|
default:
|
|
BUG();
|
|
}
|
|
entry->msg = *msg;
|
|
}
|
|
|
|
void mask_msi_irq(unsigned int irq)
|
|
{
|
|
msi_set_mask_bit(irq, 1);
|
|
}
|
|
|
|
void unmask_msi_irq(unsigned int irq)
|
|
{
|
|
msi_set_mask_bit(irq, 0);
|
|
}
|
|
|
|
static int msi_free_irq(struct pci_dev* dev, int irq);
|
|
|
|
static int msi_init(void)
|
|
{
|
|
static int status = -ENOMEM;
|
|
|
|
if (!status)
|
|
return status;
|
|
|
|
status = msi_cache_init();
|
|
if (status < 0) {
|
|
pci_msi_enable = 0;
|
|
printk(KERN_WARNING "PCI: MSI cache init failed\n");
|
|
return status;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static struct msi_desc* alloc_msi_entry(void)
|
|
{
|
|
struct msi_desc *entry;
|
|
|
|
entry = kmem_cache_zalloc(msi_cachep, GFP_KERNEL);
|
|
if (!entry)
|
|
return NULL;
|
|
|
|
entry->link.tail = entry->link.head = 0; /* single message */
|
|
entry->dev = NULL;
|
|
|
|
return entry;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static void __pci_restore_msi_state(struct pci_dev *dev)
|
|
{
|
|
int pos;
|
|
u16 control;
|
|
struct msi_desc *entry;
|
|
|
|
if (!dev->msi_enabled)
|
|
return;
|
|
|
|
entry = get_irq_msi(dev->irq);
|
|
pos = entry->msi_attrib.pos;
|
|
|
|
pci_intx(dev, 0); /* disable intx */
|
|
msi_set_enable(dev, 0);
|
|
write_msi_msg(dev->irq, &entry->msg);
|
|
if (entry->msi_attrib.maskbit)
|
|
msi_set_mask_bit(dev->irq, entry->msi_attrib.masked);
|
|
|
|
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
|
|
control &= ~(PCI_MSI_FLAGS_QSIZE | PCI_MSI_FLAGS_ENABLE);
|
|
if (entry->msi_attrib.maskbit || !entry->msi_attrib.masked)
|
|
control |= PCI_MSI_FLAGS_ENABLE;
|
|
pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
|
|
}
|
|
|
|
static void __pci_restore_msix_state(struct pci_dev *dev)
|
|
{
|
|
int pos;
|
|
int irq, head, tail = 0;
|
|
struct msi_desc *entry;
|
|
u16 control;
|
|
|
|
if (!dev->msix_enabled)
|
|
return;
|
|
|
|
/* route the table */
|
|
pci_intx(dev, 0); /* disable intx */
|
|
msix_set_enable(dev, 0);
|
|
irq = head = dev->first_msi_irq;
|
|
entry = get_irq_msi(irq);
|
|
pos = entry->msi_attrib.pos;
|
|
while (head != tail) {
|
|
entry = get_irq_msi(irq);
|
|
write_msi_msg(irq, &entry->msg);
|
|
msi_set_mask_bit(irq, entry->msi_attrib.masked);
|
|
|
|
tail = entry->link.tail;
|
|
irq = tail;
|
|
}
|
|
|
|
pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
|
|
control &= ~PCI_MSIX_FLAGS_MASKALL;
|
|
control |= PCI_MSIX_FLAGS_ENABLE;
|
|
pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
|
|
}
|
|
|
|
void pci_restore_msi_state(struct pci_dev *dev)
|
|
{
|
|
__pci_restore_msi_state(dev);
|
|
__pci_restore_msix_state(dev);
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
/**
|
|
* msi_capability_init - configure device's MSI capability structure
|
|
* @dev: pointer to the pci_dev data structure of MSI device function
|
|
*
|
|
* Setup the MSI capability structure of device function with a single
|
|
* MSI irq, regardless of device function is capable of handling
|
|
* multiple messages. A return of zero indicates the successful setup
|
|
* of an entry zero with the new MSI irq or non-zero for otherwise.
|
|
**/
|
|
static int msi_capability_init(struct pci_dev *dev)
|
|
{
|
|
struct msi_desc *entry;
|
|
int pos, irq;
|
|
u16 control;
|
|
|
|
msi_set_enable(dev, 0); /* Ensure msi is disabled as I set it up */
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
|
|
pci_read_config_word(dev, msi_control_reg(pos), &control);
|
|
/* MSI Entry Initialization */
|
|
entry = alloc_msi_entry();
|
|
if (!entry)
|
|
return -ENOMEM;
|
|
|
|
entry->msi_attrib.type = PCI_CAP_ID_MSI;
|
|
entry->msi_attrib.is_64 = is_64bit_address(control);
|
|
entry->msi_attrib.entry_nr = 0;
|
|
entry->msi_attrib.maskbit = is_mask_bit_support(control);
|
|
entry->msi_attrib.masked = 1;
|
|
entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */
|
|
entry->msi_attrib.pos = pos;
|
|
if (is_mask_bit_support(control)) {
|
|
entry->mask_base = (void __iomem *)(long)msi_mask_bits_reg(pos,
|
|
is_64bit_address(control));
|
|
}
|
|
entry->dev = dev;
|
|
if (entry->msi_attrib.maskbit) {
|
|
unsigned int maskbits, temp;
|
|
/* All MSIs are unmasked by default, Mask them all */
|
|
pci_read_config_dword(dev,
|
|
msi_mask_bits_reg(pos, is_64bit_address(control)),
|
|
&maskbits);
|
|
temp = (1 << multi_msi_capable(control));
|
|
temp = ((temp - 1) & ~temp);
|
|
maskbits |= temp;
|
|
pci_write_config_dword(dev,
|
|
msi_mask_bits_reg(pos, is_64bit_address(control)),
|
|
maskbits);
|
|
}
|
|
/* Configure MSI capability structure */
|
|
irq = arch_setup_msi_irq(dev, entry);
|
|
if (irq < 0) {
|
|
kmem_cache_free(msi_cachep, entry);
|
|
return irq;
|
|
}
|
|
entry->link.head = irq;
|
|
entry->link.tail = irq;
|
|
dev->first_msi_irq = irq;
|
|
set_irq_msi(irq, entry);
|
|
|
|
/* Set MSI enabled bits */
|
|
pci_intx(dev, 0); /* disable intx */
|
|
msi_set_enable(dev, 1);
|
|
dev->msi_enabled = 1;
|
|
|
|
dev->irq = irq;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* msix_capability_init - configure device's MSI-X capability
|
|
* @dev: pointer to the pci_dev data structure of MSI-X device function
|
|
* @entries: pointer to an array of struct msix_entry entries
|
|
* @nvec: number of @entries
|
|
*
|
|
* Setup the MSI-X capability structure of device function with a
|
|
* single MSI-X irq. A return of zero indicates the successful setup of
|
|
* requested MSI-X entries with allocated irqs or non-zero for otherwise.
|
|
**/
|
|
static int msix_capability_init(struct pci_dev *dev,
|
|
struct msix_entry *entries, int nvec)
|
|
{
|
|
struct msi_desc *head = NULL, *tail = NULL, *entry = NULL;
|
|
int irq, pos, i, j, nr_entries, temp = 0;
|
|
unsigned long phys_addr;
|
|
u32 table_offset;
|
|
u16 control;
|
|
u8 bir;
|
|
void __iomem *base;
|
|
|
|
msix_set_enable(dev, 0);/* Ensure msix is disabled as I set it up */
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
|
|
/* Request & Map MSI-X table region */
|
|
pci_read_config_word(dev, msi_control_reg(pos), &control);
|
|
nr_entries = multi_msix_capable(control);
|
|
|
|
pci_read_config_dword(dev, msix_table_offset_reg(pos), &table_offset);
|
|
bir = (u8)(table_offset & PCI_MSIX_FLAGS_BIRMASK);
|
|
table_offset &= ~PCI_MSIX_FLAGS_BIRMASK;
|
|
phys_addr = pci_resource_start (dev, bir) + table_offset;
|
|
base = ioremap_nocache(phys_addr, nr_entries * PCI_MSIX_ENTRY_SIZE);
|
|
if (base == NULL)
|
|
return -ENOMEM;
|
|
|
|
/* MSI-X Table Initialization */
|
|
for (i = 0; i < nvec; i++) {
|
|
entry = alloc_msi_entry();
|
|
if (!entry)
|
|
break;
|
|
|
|
j = entries[i].entry;
|
|
entry->msi_attrib.type = PCI_CAP_ID_MSIX;
|
|
entry->msi_attrib.is_64 = 1;
|
|
entry->msi_attrib.entry_nr = j;
|
|
entry->msi_attrib.maskbit = 1;
|
|
entry->msi_attrib.masked = 1;
|
|
entry->msi_attrib.default_irq = dev->irq;
|
|
entry->msi_attrib.pos = pos;
|
|
entry->dev = dev;
|
|
entry->mask_base = base;
|
|
|
|
/* Configure MSI-X capability structure */
|
|
irq = arch_setup_msi_irq(dev, entry);
|
|
if (irq < 0) {
|
|
kmem_cache_free(msi_cachep, entry);
|
|
break;
|
|
}
|
|
entries[i].vector = irq;
|
|
if (!head) {
|
|
entry->link.head = irq;
|
|
entry->link.tail = irq;
|
|
head = entry;
|
|
} else {
|
|
entry->link.head = temp;
|
|
entry->link.tail = tail->link.tail;
|
|
tail->link.tail = irq;
|
|
head->link.head = irq;
|
|
}
|
|
temp = irq;
|
|
tail = entry;
|
|
|
|
set_irq_msi(irq, entry);
|
|
}
|
|
if (i != nvec) {
|
|
int avail = i - 1;
|
|
i--;
|
|
for (; i >= 0; i--) {
|
|
irq = (entries + i)->vector;
|
|
msi_free_irq(dev, irq);
|
|
(entries + i)->vector = 0;
|
|
}
|
|
/* If we had some success report the number of irqs
|
|
* we succeeded in setting up.
|
|
*/
|
|
if (avail <= 0)
|
|
avail = -EBUSY;
|
|
return avail;
|
|
}
|
|
dev->first_msi_irq = entries[0].vector;
|
|
/* Set MSI-X enabled bits */
|
|
pci_intx(dev, 0); /* disable intx */
|
|
msix_set_enable(dev, 1);
|
|
dev->msix_enabled = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_msi_supported - check whether MSI may be enabled on device
|
|
* @dev: pointer to the pci_dev data structure of MSI device function
|
|
*
|
|
* Look at global flags, the device itself, and its parent busses
|
|
* to return 0 if MSI are supported for the device.
|
|
**/
|
|
static
|
|
int pci_msi_supported(struct pci_dev * dev)
|
|
{
|
|
struct pci_bus *bus;
|
|
|
|
/* MSI must be globally enabled and supported by the device */
|
|
if (!pci_msi_enable || !dev || dev->no_msi)
|
|
return -EINVAL;
|
|
|
|
/* Any bridge which does NOT route MSI transactions from it's
|
|
* secondary bus to it's primary bus must set NO_MSI flag on
|
|
* the secondary pci_bus.
|
|
* We expect only arch-specific PCI host bus controller driver
|
|
* or quirks for specific PCI bridges to be setting NO_MSI.
|
|
*/
|
|
for (bus = dev->bus; bus; bus = bus->parent)
|
|
if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_enable_msi - configure device's MSI capability structure
|
|
* @dev: pointer to the pci_dev data structure of MSI device function
|
|
*
|
|
* Setup the MSI capability structure of device function with
|
|
* a single MSI irq upon its software driver call to request for
|
|
* MSI mode enabled on its hardware device function. A return of zero
|
|
* indicates the successful setup of an entry zero with the new MSI
|
|
* irq or non-zero for otherwise.
|
|
**/
|
|
int pci_enable_msi(struct pci_dev* dev)
|
|
{
|
|
int pos, status;
|
|
|
|
if (pci_msi_supported(dev) < 0)
|
|
return -EINVAL;
|
|
|
|
status = msi_init();
|
|
if (status < 0)
|
|
return status;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
|
|
if (!pos)
|
|
return -EINVAL;
|
|
|
|
WARN_ON(!!dev->msi_enabled);
|
|
|
|
/* Check whether driver already requested for MSI-X irqs */
|
|
if (dev->msix_enabled) {
|
|
printk(KERN_INFO "PCI: %s: Can't enable MSI. "
|
|
"Device already has MSI-X enabled\n",
|
|
pci_name(dev));
|
|
return -EINVAL;
|
|
}
|
|
status = msi_capability_init(dev);
|
|
return status;
|
|
}
|
|
|
|
void pci_disable_msi(struct pci_dev* dev)
|
|
{
|
|
struct msi_desc *entry;
|
|
int default_irq;
|
|
|
|
if (!pci_msi_enable)
|
|
return;
|
|
if (!dev)
|
|
return;
|
|
|
|
if (!dev->msi_enabled)
|
|
return;
|
|
|
|
msi_set_enable(dev, 0);
|
|
pci_intx(dev, 1); /* enable intx */
|
|
dev->msi_enabled = 0;
|
|
|
|
entry = get_irq_msi(dev->first_msi_irq);
|
|
if (!entry || !entry->dev || entry->msi_attrib.type != PCI_CAP_ID_MSI) {
|
|
return;
|
|
}
|
|
if (irq_has_action(dev->first_msi_irq)) {
|
|
printk(KERN_WARNING "PCI: %s: pci_disable_msi() called without "
|
|
"free_irq() on MSI irq %d\n",
|
|
pci_name(dev), dev->first_msi_irq);
|
|
BUG_ON(irq_has_action(dev->first_msi_irq));
|
|
} else {
|
|
default_irq = entry->msi_attrib.default_irq;
|
|
msi_free_irq(dev, dev->first_msi_irq);
|
|
|
|
/* Restore dev->irq to its default pin-assertion irq */
|
|
dev->irq = default_irq;
|
|
}
|
|
dev->first_msi_irq = 0;
|
|
}
|
|
|
|
static int msi_free_irq(struct pci_dev* dev, int irq)
|
|
{
|
|
struct msi_desc *entry;
|
|
int head, entry_nr, type;
|
|
void __iomem *base;
|
|
|
|
entry = get_irq_msi(irq);
|
|
if (!entry || entry->dev != dev) {
|
|
return -EINVAL;
|
|
}
|
|
type = entry->msi_attrib.type;
|
|
entry_nr = entry->msi_attrib.entry_nr;
|
|
head = entry->link.head;
|
|
base = entry->mask_base;
|
|
get_irq_msi(entry->link.head)->link.tail = entry->link.tail;
|
|
get_irq_msi(entry->link.tail)->link.head = entry->link.head;
|
|
|
|
arch_teardown_msi_irq(irq);
|
|
kmem_cache_free(msi_cachep, entry);
|
|
|
|
if (type == PCI_CAP_ID_MSIX) {
|
|
writel(1, base + entry_nr * PCI_MSIX_ENTRY_SIZE +
|
|
PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
|
|
|
|
if (head == irq)
|
|
iounmap(base);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_enable_msix - configure device's MSI-X capability structure
|
|
* @dev: pointer to the pci_dev data structure of MSI-X device function
|
|
* @entries: pointer to an array of MSI-X entries
|
|
* @nvec: number of MSI-X irqs requested for allocation by device driver
|
|
*
|
|
* Setup the MSI-X capability structure of device function with the number
|
|
* of requested irqs upon its software driver call to request for
|
|
* MSI-X mode enabled on its hardware device function. A return of zero
|
|
* indicates the successful configuration of MSI-X capability structure
|
|
* with new allocated MSI-X irqs. A return of < 0 indicates a failure.
|
|
* Or a return of > 0 indicates that driver request is exceeding the number
|
|
* of irqs available. Driver should use the returned value to re-send
|
|
* its request.
|
|
**/
|
|
int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec)
|
|
{
|
|
int status, pos, nr_entries;
|
|
int i, j;
|
|
u16 control;
|
|
|
|
if (!entries || pci_msi_supported(dev) < 0)
|
|
return -EINVAL;
|
|
|
|
status = msi_init();
|
|
if (status < 0)
|
|
return status;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
|
|
if (!pos)
|
|
return -EINVAL;
|
|
|
|
pci_read_config_word(dev, msi_control_reg(pos), &control);
|
|
nr_entries = multi_msix_capable(control);
|
|
if (nvec > nr_entries)
|
|
return -EINVAL;
|
|
|
|
/* Check for any invalid entries */
|
|
for (i = 0; i < nvec; i++) {
|
|
if (entries[i].entry >= nr_entries)
|
|
return -EINVAL; /* invalid entry */
|
|
for (j = i + 1; j < nvec; j++) {
|
|
if (entries[i].entry == entries[j].entry)
|
|
return -EINVAL; /* duplicate entry */
|
|
}
|
|
}
|
|
WARN_ON(!!dev->msix_enabled);
|
|
|
|
/* Check whether driver already requested for MSI irq */
|
|
if (dev->msi_enabled) {
|
|
printk(KERN_INFO "PCI: %s: Can't enable MSI-X. "
|
|
"Device already has an MSI irq assigned\n",
|
|
pci_name(dev));
|
|
return -EINVAL;
|
|
}
|
|
status = msix_capability_init(dev, entries, nvec);
|
|
return status;
|
|
}
|
|
|
|
void pci_disable_msix(struct pci_dev* dev)
|
|
{
|
|
int irq, head, tail = 0, warning = 0;
|
|
|
|
if (!pci_msi_enable)
|
|
return;
|
|
if (!dev)
|
|
return;
|
|
|
|
if (!dev->msix_enabled)
|
|
return;
|
|
|
|
msix_set_enable(dev, 0);
|
|
pci_intx(dev, 1); /* enable intx */
|
|
dev->msix_enabled = 0;
|
|
|
|
irq = head = dev->first_msi_irq;
|
|
while (head != tail) {
|
|
tail = get_irq_msi(irq)->link.tail;
|
|
if (irq_has_action(irq))
|
|
warning = 1;
|
|
else if (irq != head) /* Release MSI-X irq */
|
|
msi_free_irq(dev, irq);
|
|
irq = tail;
|
|
}
|
|
msi_free_irq(dev, irq);
|
|
if (warning) {
|
|
printk(KERN_WARNING "PCI: %s: pci_disable_msix() called without "
|
|
"free_irq() on all MSI-X irqs\n",
|
|
pci_name(dev));
|
|
BUG_ON(warning > 0);
|
|
}
|
|
dev->first_msi_irq = 0;
|
|
}
|
|
|
|
/**
|
|
* msi_remove_pci_irq_vectors - reclaim MSI(X) irqs to unused state
|
|
* @dev: pointer to the pci_dev data structure of MSI(X) device function
|
|
*
|
|
* Being called during hotplug remove, from which the device function
|
|
* is hot-removed. All previous assigned MSI/MSI-X irqs, if
|
|
* allocated for this device function, are reclaimed to unused state,
|
|
* which may be used later on.
|
|
**/
|
|
void msi_remove_pci_irq_vectors(struct pci_dev* dev)
|
|
{
|
|
if (!pci_msi_enable || !dev)
|
|
return;
|
|
|
|
if (dev->msi_enabled) {
|
|
if (irq_has_action(dev->first_msi_irq)) {
|
|
printk(KERN_WARNING "PCI: %s: msi_remove_pci_irq_vectors() "
|
|
"called without free_irq() on MSI irq %d\n",
|
|
pci_name(dev), dev->first_msi_irq);
|
|
BUG_ON(irq_has_action(dev->first_msi_irq));
|
|
} else /* Release MSI irq assigned to this device */
|
|
msi_free_irq(dev, dev->first_msi_irq);
|
|
}
|
|
if (dev->msix_enabled) {
|
|
int irq, head, tail = 0, warning = 0;
|
|
void __iomem *base = NULL;
|
|
|
|
irq = head = dev->first_msi_irq;
|
|
while (head != tail) {
|
|
tail = get_irq_msi(irq)->link.tail;
|
|
base = get_irq_msi(irq)->mask_base;
|
|
if (irq_has_action(irq))
|
|
warning = 1;
|
|
else if (irq != head) /* Release MSI-X irq */
|
|
msi_free_irq(dev, irq);
|
|
irq = tail;
|
|
}
|
|
msi_free_irq(dev, irq);
|
|
if (warning) {
|
|
iounmap(base);
|
|
printk(KERN_WARNING "PCI: %s: msi_remove_pci_irq_vectors() "
|
|
"called without free_irq() on all MSI-X irqs\n",
|
|
pci_name(dev));
|
|
BUG_ON(warning > 0);
|
|
}
|
|
}
|
|
}
|
|
|
|
void pci_no_msi(void)
|
|
{
|
|
pci_msi_enable = 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(pci_enable_msi);
|
|
EXPORT_SYMBOL(pci_disable_msi);
|
|
EXPORT_SYMBOL(pci_enable_msix);
|
|
EXPORT_SYMBOL(pci_disable_msix);
|