c2315b4ea9
The i2400m driver uses two different bits to distinguish how much the driver is up. i2400m->ready is used to denote that the infrastructure to communicate with the device is up and running. i2400m->updown is used to indicate if 'ready' and the device is up and running, ready to take control and data traffic. However, all this was pretty dirty and not clear, with many open spots where race conditions were present. This commit cleans up the situation by: - documenting the usage of both bits - setting them only in specific, well controlled places (i2400m_dev_start, i2400m_dev_stop) - ensuring the i2400m workqueue can't get in the middle of the setting by flushing it when i2400m->ready is set to zero. This allows the report hook not having to check again for the bit to be set [rx.c:i2400m_report_hook_work()]. - using i2400m->updown to determine if the device is up and running instead of the wimax state in i2400m_dev_reset_handle(). - not loosing missed messages sent by the hardware before i2400m->ready is set. In rx.c, whatever the device sends can be sent to user space over the message pipes as soon as the wimax device is registered, so don't wait for i2400m->ready to be set. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> |
||
|---|---|---|
| .. | ||
| i2400m | ||
| Kconfig | ||
| Makefile | ||