kernel-fxtec-pro1x/drivers/spi/spi_qsd.h
Prudhvi Yarlagadda 5c3d91cde8 spi: spi_qsd: Add ipc logging for spi driver
Add ipc logging for spi blsp driver.

Change-Id: I9b820308b43f935ddb853e6480a7e7b37febd9b7
Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org>
2020-10-29 18:30:10 +05:30

559 lines
19 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/* Copyright (c) 2014-2018, 2020, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef _SPI_QSD_H
#define _SPI_QSD_H
#include <linux/pinctrl/consumer.h>
#define SPI_DRV_NAME "spi_qsd"
#if IS_ENABLED(CONFIG_SPI_QSD) || IS_ENABLED(CONFIG_SPI_QSD_MODULE)
#define QSD_REG(x) (x)
#define QUP_REG(x)
#define SPI_FIFO_WORD_CNT 0x0048
#else
#define QSD_REG(x)
#define QUP_REG(x) (x)
#define QUP_CONFIG 0x0000 /* N & NO_INPUT/NO_OUTPUT bits */
#define QUP_ERROR_FLAGS_EN 0x030C
#define QUP_ERR_MASK 0x3
#define SPI_OUTPUT_FIFO_WORD_CNT 0x010C
#define SPI_INPUT_FIFO_WORD_CNT 0x0214
#define QUP_MX_WRITE_COUNT 0x0150
#define QUP_MX_WRITE_CNT_CURRENT 0x0154
#define QUP_CONFIG_SPI_MODE 0x0100
#endif
#define GSBI_CTRL_REG 0x0
#define GSBI_SPI_CONFIG 0x30
/* B-family only registers */
#define QUP_HARDWARE_VER 0x0030
#define QUP_HARDWARE_VER_2_1_1 0X20010001
#define QUP_OPERATIONAL_MASK 0x0028
#define QUP_OP_MASK_OUTPUT_SERVICE_FLAG 0x100
#define QUP_OP_MASK_INPUT_SERVICE_FLAG 0x200
#define QUP_ERROR_FLAGS 0x0308
#define SPI_CONFIG (QSD_REG(0x0000) QUP_REG(0x0300))
#define SPI_IO_CONTROL (QSD_REG(0x0004) QUP_REG(0x0304))
#define SPI_IO_MODES (QSD_REG(0x0008) QUP_REG(0x0008))
#define SPI_SW_RESET (QSD_REG(0x000C) QUP_REG(0x000C))
#define SPI_TIME_OUT_CURRENT (QSD_REG(0x0014) QUP_REG(0x0014))
#define SPI_MX_OUTPUT_COUNT (QSD_REG(0x0018) QUP_REG(0x0100))
#define SPI_MX_OUTPUT_CNT_CURRENT (QSD_REG(0x001C) QUP_REG(0x0104))
#define SPI_MX_INPUT_COUNT (QSD_REG(0x0020) QUP_REG(0x0200))
#define SPI_MX_INPUT_CNT_CURRENT (QSD_REG(0x0024) QUP_REG(0x0204))
#define SPI_MX_READ_COUNT (QSD_REG(0x0028) QUP_REG(0x0208))
#define SPI_MX_READ_CNT_CURRENT (QSD_REG(0x002C) QUP_REG(0x020C))
#define SPI_OPERATIONAL (QSD_REG(0x0030) QUP_REG(0x0018))
#define SPI_ERROR_FLAGS (QSD_REG(0x0034) QUP_REG(0x001C))
#define SPI_ERROR_FLAGS_EN (QSD_REG(0x0038) QUP_REG(0x0020))
#define SPI_DEASSERT_WAIT (QSD_REG(0x003C) QUP_REG(0x0310))
#define SPI_OUTPUT_DEBUG (QSD_REG(0x0040) QUP_REG(0x0108))
#define SPI_INPUT_DEBUG (QSD_REG(0x0044) QUP_REG(0x0210))
#define SPI_TEST_CTRL (QSD_REG(0x004C) QUP_REG(0x0024))
#define SPI_OUTPUT_FIFO (QSD_REG(0x0100) QUP_REG(0x0110))
#define SPI_INPUT_FIFO (QSD_REG(0x0200) QUP_REG(0x0218))
#define SPI_STATE (QSD_REG(SPI_OPERATIONAL) QUP_REG(0x0004))
/* QUP_CONFIG fields */
#define SPI_CFG_N 0x0000001F
#define SPI_NO_INPUT 0x00000080
#define SPI_NO_OUTPUT 0x00000040
#define SPI_EN_EXT_OUT_FLAG 0x00010000
/* SPI_CONFIG fields */
#define SPI_CFG_LOOPBACK 0x00000100
#define SPI_CFG_INPUT_FIRST 0x00000200
#define SPI_CFG_HS_MODE 0x00000400
/* SPI_IO_CONTROL fields */
#define SPI_IO_C_FORCE_CS 0x00000800
#define SPI_IO_C_CLK_IDLE_HIGH 0x00000400
#define SPI_IO_C_MX_CS_MODE 0x00000100
#define SPI_IO_C_CS_N_POLARITY 0x000000F0
#define SPI_IO_C_CS_N_POLARITY_0 0x00000010
#define SPI_IO_C_CS_SELECT 0x0000000C
#define SPI_IO_C_TRISTATE_CS 0x00000002
#define SPI_IO_C_NO_TRI_STATE 0x00000001
/* SPI_IO_MODES fields */
#define SPI_IO_M_OUTPUT_BIT_SHIFT_EN (QSD_REG(0x00004000) QUP_REG(0x00010000))
#define SPI_IO_M_PACK_EN (QSD_REG(0x00002000) QUP_REG(0x00008000))
#define SPI_IO_M_UNPACK_EN (QSD_REG(0x00001000) QUP_REG(0x00004000))
#define SPI_IO_M_INPUT_MODE (QSD_REG(0x00000C00) QUP_REG(0x00003000))
#define SPI_IO_M_OUTPUT_MODE (QSD_REG(0x00000300) QUP_REG(0x00000C00))
#define SPI_IO_M_INPUT_FIFO_SIZE (QSD_REG(0x000000C0) QUP_REG(0x00000380))
#define SPI_IO_M_INPUT_BLOCK_SIZE (QSD_REG(0x00000030) QUP_REG(0x00000060))
#define SPI_IO_M_OUTPUT_FIFO_SIZE (QSD_REG(0x0000000C) QUP_REG(0x0000001C))
#define SPI_IO_M_OUTPUT_BLOCK_SIZE (QSD_REG(0x00000003) QUP_REG(0x00000003))
#define INPUT_BLOCK_SZ_SHIFT (QSD_REG(4) QUP_REG(5))
#define INPUT_FIFO_SZ_SHIFT (QSD_REG(6) QUP_REG(7))
#define OUTPUT_BLOCK_SZ_SHIFT (QSD_REG(0) QUP_REG(0))
#define OUTPUT_FIFO_SZ_SHIFT (QSD_REG(2) QUP_REG(2))
#define OUTPUT_MODE_SHIFT (QSD_REG(8) QUP_REG(10))
#define INPUT_MODE_SHIFT (QSD_REG(10) QUP_REG(12))
/* SPI_OPERATIONAL fields */
#define SPI_OP_IN_BLK_RD_REQ_FLAG 0x00002000
#define SPI_OP_OUT_BLK_WR_REQ_FLAG 0x00001000
#define SPI_OP_MAX_INPUT_DONE_FLAG 0x00000800
#define SPI_OP_MAX_OUTPUT_DONE_FLAG 0x00000400
#define SPI_OP_INPUT_SERVICE_FLAG 0x00000200
#define SPI_OP_OUTPUT_SERVICE_FLAG 0x00000100
#define SPI_OP_INPUT_FIFO_FULL 0x00000080
#define SPI_OP_OUTPUT_FIFO_FULL 0x00000040
#define SPI_OP_IP_FIFO_NOT_EMPTY 0x00000020
#define SPI_OP_OP_FIFO_NOT_EMPTY 0x00000010
#define SPI_OP_STATE_VALID 0x00000004
#define SPI_OP_STATE 0x00000003
#define SPI_OP_STATE_CLEAR_BITS 0x2
#define SPI_PINCTRL_STATE_DEFAULT "spi_default"
#define SPI_PINCTRL_STATE_SLEEP "spi_sleep"
enum msm_spi_state {
SPI_OP_STATE_RESET = 0x00000000,
SPI_OP_STATE_RUN = 0x00000001,
SPI_OP_STATE_PAUSE = 0x00000003,
};
/* SPI_ERROR_FLAGS fields */
#define SPI_ERR_OUTPUT_OVER_RUN_ERR 0x00000020
#define SPI_ERR_INPUT_UNDER_RUN_ERR 0x00000010
#define SPI_ERR_OUTPUT_UNDER_RUN_ERR 0x00000008
#define SPI_ERR_INPUT_OVER_RUN_ERR 0x00000004
#define SPI_ERR_CLK_OVER_RUN_ERR 0x00000002
#define SPI_ERR_CLK_UNDER_RUN_ERR 0x00000001
/* We don't allow transactions larger than 4K-64 or 64K-64 due to
* mx_input/output_cnt register size
*/
#define SPI_MAX_TRANSFERS (QSD_REG(0xFC0) QUP_REG(0xFC0))
#define SPI_MAX_LEN (SPI_MAX_TRANSFERS * dd->bytes_per_word)
#define SPI_NUM_CHIPSELECTS 4
#define SPI_SUPPORTED_MODES (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP)
/* high speed mode is when bus rate is greater then 26MHz */
#define SPI_HS_MIN_RATE (26000000)
#define SPI_DELAY_THRESHOLD 1
/* Default timeout is 10 milliseconds */
#define SPI_DEFAULT_TIMEOUT 10
/* 250 microseconds */
#define SPI_TRYLOCK_DELAY 250
/* Data Mover burst size */
#define DM_BURST_SIZE 16
/* Data Mover commands should be aligned to 64 bit(8 bytes) */
#define DM_BYTE_ALIGN 8
#if defined(CONFIG_ARM64) || defined(CONFIG_LPAE)
#define spi_dma_mask(dev) (dma_set_mask((dev), DMA_BIT_MASK(36)))
#else
#define spi_dma_mask(dev) (dma_set_mask((dev), DMA_BIT_MASK(32)))
#endif
enum msm_spi_qup_version {
SPI_QUP_VERSION_NONE = 0x0,
SPI_QUP_VERSION_BFAM = 0x2,
};
enum msm_spi_pipe_direction {
SPI_BAM_CONSUMER_PIPE = 0x0,
SPI_BAM_PRODUCER_PIPE = 0x1,
};
#define SPI_BAM_MAX_DESC_NUM 32
#define SPI_MAX_TRFR_BTWN_RESETS ((64 * 1024) - 16) /* 64KB - 16byte */
enum msm_spi_clk_path_vec_idx {
MSM_SPI_CLK_PATH_SUSPEND_VEC = 0,
MSM_SPI_CLK_PATH_RESUME_VEC = 1,
};
#define MSM_SPI_CLK_PATH_AVRG_BW(dd) (76800000)
#define MSM_SPI_CLK_PATH_BRST_BW(dd) (76800000)
static char const * const spi_rsrcs[] = {
"spi_clk",
"spi_miso",
"spi_mosi"
};
static char const * const spi_cs_rsrcs[] = {
"spi_cs",
"spi_cs1",
"spi_cs2",
"spi_cs3",
};
enum msm_spi_mode {
SPI_FIFO_MODE = 0x0, /* 00 */
SPI_BLOCK_MODE = 0x1, /* 01 */
SPI_BAM_MODE = 0x3, /* 11 */
SPI_MODE_NONE = 0xFF, /* invalid value */
};
/* Structure for SPI CS GPIOs */
struct spi_cs_gpio {
int gpio_num;
bool valid;
};
#ifdef CONFIG_DEBUG_FS
struct msm_spi_debugfs_data {
int offset;
struct msm_spi *dd;
};
/* Used to create debugfs entries */
static struct msm_spi_regs{
const char *name;
mode_t mode;
int offset;
} debugfs_spi_regs[] = {
{"config", 0644, SPI_CONFIG },
{"io_control", 0644, SPI_IO_CONTROL },
{"io_modes", 0644, SPI_IO_MODES },
{"sw_reset", 0200, SPI_SW_RESET },
{"time_out_current", 0444, SPI_TIME_OUT_CURRENT },
{"mx_output_count", 0644, SPI_MX_OUTPUT_COUNT },
{"mx_output_cnt_current", 0444, SPI_MX_OUTPUT_CNT_CURRENT },
{"mx_input_count", 0644, SPI_MX_INPUT_COUNT },
{"mx_input_cnt_current", 0444, SPI_MX_INPUT_CNT_CURRENT },
{"mx_read_count", 0644, SPI_MX_READ_COUNT },
{"mx_read_cnt_current", 0444, SPI_MX_READ_CNT_CURRENT },
{"operational", 0644, SPI_OPERATIONAL },
{"error_flags", 0644, SPI_ERROR_FLAGS },
{"error_flags_en", 0644, SPI_ERROR_FLAGS_EN },
{"deassert_wait", 0644, SPI_DEASSERT_WAIT },
{"output_debug", 0444, SPI_OUTPUT_DEBUG },
{"input_debug", 0444, SPI_INPUT_DEBUG },
{"test_ctrl", 0644, SPI_TEST_CTRL },
{"output_fifo", 0200, SPI_OUTPUT_FIFO },
{"input_fifo", 0400, SPI_INPUT_FIFO },
{"spi_state", 0644, SPI_STATE },
#if IS_ENABLED(CONFIG_SPI_QSD) || IS_ENABLED(CONFIG_SPI_QSD_MODULE)
{"fifo_word_cnt", 0444, SPI_FIFO_WORD_CNT},
#else
{"qup_config", 0644, QUP_CONFIG},
{"qup_error_flags", 0644, QUP_ERROR_FLAGS},
{"qup_error_flags_en", 0644, QUP_ERROR_FLAGS_EN},
{"mx_write_cnt", 0644, QUP_MX_WRITE_COUNT},
{"mx_write_cnt_current", 0444, QUP_MX_WRITE_CNT_CURRENT},
{"output_fifo_word_cnt", 0444, SPI_OUTPUT_FIFO_WORD_CNT},
{"input_fifo_word_cnt", 0444, SPI_INPUT_FIFO_WORD_CNT},
#endif
};
#endif
struct msm_spi_bam_pipe {
const char *name;
struct sps_pipe *handle;
struct sps_connect config;
bool teardown_required;
};
struct msm_spi_bam {
void __iomem *base;
phys_addr_t phys_addr;
uintptr_t handle;
int irq;
struct msm_spi_bam_pipe prod;
struct msm_spi_bam_pipe cons;
bool deregister_required;
u32 curr_rx_bytes_recvd;
u32 curr_tx_bytes_sent;
u32 bam_rx_len;
u32 bam_tx_len;
};
struct msm_spi {
u8 *read_buf;
const u8 *write_buf;
void __iomem *base;
struct device *dev;
spinlock_t queue_lock;
struct mutex core_lock;
struct spi_device *spi;
struct spi_transfer *cur_transfer;
struct completion tx_transfer_complete;
struct completion rx_transfer_complete;
struct clk *clk; /* core clock */
struct clk *pclk; /* interface clock */
struct msm_bus_client_handle *bus_cl_hdl;
unsigned long mem_phys_addr;
size_t mem_size;
void *ipc_logs; /* ipc logs handler */
int input_fifo_size;
int output_fifo_size;
u32 rx_bytes_remaining;
u32 tx_bytes_remaining;
u32 clock_speed;
int irq_in;
int read_xfr_cnt;
int write_xfr_cnt;
int write_len;
int read_len;
#if IS_ENABLED(CONFIG_SPI_QSD) || IS_ENABLED(CONFIG_SPI_QSD_MODULE)
int irq_out;
int irq_err;
#endif
int bytes_per_word;
bool suspended;
bool transfer_pending;
wait_queue_head_t continue_suspend;
/* DMA data */
enum msm_spi_mode tx_mode;
enum msm_spi_mode rx_mode;
bool use_dma;
int tx_dma_chan;
int tx_dma_crci;
int rx_dma_chan;
int rx_dma_crci;
int (*dma_init)(struct msm_spi *dd);
void (*dma_teardown)(struct msm_spi *dd);
struct msm_spi_bam bam;
int input_block_size;
int output_block_size;
int input_burst_size;
int output_burst_size;
atomic_t rx_irq_called;
atomic_t tx_irq_called;
/* Used to pad messages unaligned to block size */
u8 *tx_padding;
dma_addr_t tx_padding_dma;
u8 *rx_padding;
dma_addr_t rx_padding_dma;
u32 tx_unaligned_len;
u32 rx_unaligned_len;
/* DMA statistics */
int stat_rx;
int stat_tx;
#ifdef CONFIG_DEBUG_FS
struct dentry *dent_spi;
struct dentry *debugfs_spi_regs[ARRAY_SIZE(debugfs_spi_regs)];
struct msm_spi_debugfs_data reg_data[ARRAY_SIZE(debugfs_spi_regs)];
#endif
struct msm_spi_platform_data *pdata; /* Platform data */
/* When set indicates multiple transfers in a single message */
bool rx_done;
bool tx_done;
u32 cur_msg_len;
/* Used in FIFO mode to keep track of the transfer being processed */
struct spi_transfer *cur_tx_transfer;
struct spi_transfer *cur_rx_transfer;
/* Temporary buffer used for WR-WR or WR-RD transfers */
u8 *temp_buf;
/* GPIO pin numbers for SPI clk, miso and mosi */
int spi_gpios[ARRAY_SIZE(spi_rsrcs)];
/* SPI CS GPIOs for each slave */
struct spi_cs_gpio cs_gpios[ARRAY_SIZE(spi_cs_rsrcs)];
enum msm_spi_qup_version qup_ver;
int max_trfr_len;
u16 xfrs_delay_usec;
struct pinctrl *pinctrl;
struct pinctrl_state *pins_active;
struct pinctrl_state *pins_sleep;
bool is_init_complete;
bool pack_words;
};
/* Forward declaration */
static irqreturn_t msm_spi_input_irq(int irq, void *dev_id);
static irqreturn_t msm_spi_output_irq(int irq, void *dev_id);
static irqreturn_t msm_spi_error_irq(int irq, void *dev_id);
static inline int msm_spi_set_state(struct msm_spi *dd,
enum msm_spi_state state);
static void msm_spi_write_word_to_fifo(struct msm_spi *dd);
static inline void msm_spi_write_rmn_to_fifo(struct msm_spi *dd);
static irqreturn_t msm_spi_qup_irq(int irq, void *dev_id);
#if IS_ENABLED(CONFIG_SPI_QSD) || IS_ENABLED(CONFIG_SPI_QSD_MODULE)
static inline void msm_spi_disable_irqs(struct msm_spi *dd)
{
disable_irq(dd->irq_in);
disable_irq(dd->irq_out);
disable_irq(dd->irq_err);
}
static inline void msm_spi_enable_irqs(struct msm_spi *dd)
{
enable_irq(dd->irq_in);
enable_irq(dd->irq_out);
enable_irq(dd->irq_err);
}
static inline int msm_spi_request_irq(struct msm_spi *dd,
struct platform_device *pdev,
struct spi_master *master)
{
int rc;
dd->irq_in = platform_get_irq(pdev, 0);
dd->irq_out = platform_get_irq(pdev, 1);
dd->irq_err = platform_get_irq(pdev, 2);
if ((dd->irq_in < 0) || (dd->irq_out < 0) || (dd->irq_err < 0))
return -EINVAL;
rc = devm_request_irq(dd->dev, dd->irq_in, msm_spi_input_irq,
IRQF_TRIGGER_RISING, pdev->name, dd);
if (rc)
goto error_irq;
rc = devm_request_irq(dd->dev, dd->irq_out, msm_spi_output_irq,
IRQF_TRIGGER_RISING, pdev->name, dd);
if (rc)
goto error_irq;
rc = devm_request_irq(dd->dev, dd->irq_err, msm_spi_error_irq,
IRQF_TRIGGER_RISING, pdev->name, master);
if (rc)
goto error_irq;
error_irq:
return rc;
}
static inline void msm_spi_get_clk_err(struct msm_spi *dd, u32 *spi_err) {}
static inline void msm_spi_ack_clk_err(struct msm_spi *dd) {}
static inline void msm_spi_set_qup_config(struct msm_spi *dd, int bpw) {}
static inline int msm_spi_prepare_for_write(struct msm_spi *dd) { return 0; }
static inline void msm_spi_start_write(struct msm_spi *dd, u32 read_count)
{
msm_spi_write_word_to_fifo(dd);
}
static inline void msm_spi_set_write_count(struct msm_spi *dd, int val) {}
static inline void msm_spi_complete(struct msm_spi *dd)
{
complete(&dd->transfer_complete);
}
static inline void msm_spi_enable_error_flags(struct msm_spi *dd)
{
writel_relaxed(0x0000007B, dd->base + SPI_ERROR_FLAGS_EN);
}
static inline void msm_spi_clear_error_flags(struct msm_spi *dd)
{
writel_relaxed(0x0000007F, dd->base + SPI_ERROR_FLAGS);
}
#else
/* In QUP the same interrupt line is used for input, output and error*/
static inline int msm_spi_request_irq(struct msm_spi *dd,
struct platform_device *pdev,
struct spi_master *master)
{
dd->irq_in = platform_get_irq(pdev, 0);
if (dd->irq_in < 0)
return -EINVAL;
return devm_request_irq(dd->dev, dd->irq_in, msm_spi_qup_irq,
IRQF_TRIGGER_HIGH, pdev->name, dd);
}
static inline void msm_spi_disable_irqs(struct msm_spi *dd)
{
disable_irq(dd->irq_in);
}
static inline void msm_spi_enable_irqs(struct msm_spi *dd)
{
enable_irq(dd->irq_in);
}
static inline void msm_spi_get_clk_err(struct msm_spi *dd, u32 *spi_err)
{
*spi_err = readl_relaxed(dd->base + QUP_ERROR_FLAGS);
}
static inline void msm_spi_ack_clk_err(struct msm_spi *dd)
{
writel_relaxed(QUP_ERR_MASK, dd->base + QUP_ERROR_FLAGS);
}
static inline void
msm_spi_set_bpw_and_no_io_flags(struct msm_spi *dd, u32 *config, int n);
/**
* msm_spi_set_qup_config: set QUP_CONFIG to no_input, no_output, and N bits
*/
static inline void msm_spi_set_qup_config(struct msm_spi *dd, int bpw)
{
u32 qup_config = readl_relaxed(dd->base + QUP_CONFIG);
msm_spi_set_bpw_and_no_io_flags(dd, &qup_config, bpw-1);
writel_relaxed(qup_config | QUP_CONFIG_SPI_MODE, dd->base + QUP_CONFIG);
}
static inline int msm_spi_prepare_for_write(struct msm_spi *dd)
{
if (msm_spi_set_state(dd, SPI_OP_STATE_RUN))
return -EINVAL;
if (msm_spi_set_state(dd, SPI_OP_STATE_PAUSE))
return -EINVAL;
return 0;
}
static inline void msm_spi_start_write(struct msm_spi *dd, u32 read_count)
{
msm_spi_write_rmn_to_fifo(dd);
}
static inline void msm_spi_set_write_count(struct msm_spi *dd, int val)
{
writel_relaxed(val, dd->base + QUP_MX_WRITE_COUNT);
}
static inline void msm_spi_complete(struct msm_spi *dd)
{
dd->tx_done = true;
dd->rx_done = true;
}
static inline void msm_spi_enable_error_flags(struct msm_spi *dd)
{
if (dd->qup_ver == SPI_QUP_VERSION_BFAM)
writel_relaxed(
SPI_ERR_CLK_UNDER_RUN_ERR | SPI_ERR_CLK_OVER_RUN_ERR,
dd->base + SPI_ERROR_FLAGS_EN);
else
writel_relaxed(0x00000078, dd->base + SPI_ERROR_FLAGS_EN);
}
static inline void msm_spi_clear_error_flags(struct msm_spi *dd)
{
if (dd->qup_ver == SPI_QUP_VERSION_BFAM)
writel_relaxed(
SPI_ERR_CLK_UNDER_RUN_ERR | SPI_ERR_CLK_OVER_RUN_ERR,
dd->base + SPI_ERROR_FLAGS);
else
writel_relaxed(0x0000007C, dd->base + SPI_ERROR_FLAGS);
}
#endif
#endif