e087530564
PM660L v2.0 has the NCP power-on issue fixed. This allows enabling the short-circuit IRQ. Enable the same. Change-Id: I4c0523ef8c46dd9bac190d4ad69190ef777ef14b Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Shilpa Suresh <sbsure@codeaurora.org>
2392 lines
57 KiB
C
2392 lines
57 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
||
/*
|
||
* Copyright (c) 2016-2020, The Linux Foundation. All rights reserved.
|
||
*/
|
||
|
||
#define pr_fmt(fmt) "LCDB: %s: " fmt, __func__
|
||
|
||
#include <linux/delay.h>
|
||
#include <linux/device.h>
|
||
#include <linux/interrupt.h>
|
||
#include <linux/ktime.h>
|
||
#include <linux/module.h>
|
||
#include <linux/of_irq.h>
|
||
#include <linux/platform_device.h>
|
||
#include <linux/regmap.h>
|
||
#include <linux/regulator/driver.h>
|
||
#include <linux/regulator/of_regulator.h>
|
||
#include <linux/regulator/machine.h>
|
||
#include <linux/qpnp/qpnp-revid.h>
|
||
|
||
#define QPNP_LCDB_REGULATOR_DRIVER_NAME "qcom,qpnp-lcdb-regulator"
|
||
|
||
/* LCDB */
|
||
#define LCDB_STS1_REG 0x08
|
||
|
||
#define INT_RT_STATUS_REG 0x10
|
||
#define VREG_OK_RT_STS_BIT BIT(0)
|
||
#define SC_ERROR_RT_STS_BIT BIT(1)
|
||
|
||
#define LCDB_STS3_REG 0x0A
|
||
#define LDO_VREG_OK_BIT BIT(7)
|
||
|
||
#define LCDB_STS4_REG 0x0B
|
||
#define NCP_VREG_OK_BIT BIT(7)
|
||
|
||
#define LCDB_AUTO_TOUCH_WAKE_CTL_REG 0x40
|
||
#define EN_AUTO_TOUCH_WAKE_BIT BIT(7)
|
||
#define ATTW_TOFF_TIME_MASK GENMASK(3, 2)
|
||
#define ATTW_TON_TIME_MASK GENMASK(1, 0)
|
||
#define ATTW_TOFF_TIME_SHIFT 2
|
||
#define ATTW_MIN_MS 4
|
||
#define ATTW_MAX_MS 32
|
||
|
||
#define LCDB_BST_OUTPUT_VOLTAGE_REG 0x41
|
||
#define PM660_BST_OUTPUT_VOLTAGE_MASK GENMASK(4, 0)
|
||
#define BST_OUTPUT_VOLTAGE_MASK GENMASK(5, 0)
|
||
|
||
#define LCDB_MODULE_RDY_REG 0x45
|
||
#define MODULE_RDY_BIT BIT(7)
|
||
|
||
#define LCDB_ENABLE_CTL1_REG 0x46
|
||
#define MODULE_EN_BIT BIT(7)
|
||
#define HWEN_RDY_BIT BIT(6)
|
||
|
||
/* BST */
|
||
#define LCDB_BST_PD_CTL_REG 0x47
|
||
#define BOOST_DIS_PULLDOWN_BIT BIT(1)
|
||
#define BOOST_PD_STRENGTH_BIT BIT(0)
|
||
|
||
#define LCDB_BST_ILIM_CTL_REG 0x4B
|
||
#define EN_BST_ILIM_BIT BIT(7)
|
||
#define SET_BST_ILIM_MASK GENMASK(2, 0)
|
||
#define MIN_BST_ILIM_MA 200
|
||
#define MAX_BST_ILIM_MA 1600
|
||
|
||
#define LCDB_PS_CTL_REG 0x50
|
||
#define EN_PS_BIT BIT(7)
|
||
#define PM660_PS_THRESH_MASK GENMASK(1, 0)
|
||
#define PS_THRESH_MASK GENMASK(2, 0)
|
||
#define MIN_BST_PS_MA 50
|
||
#define MAX_BST_PS_MA 80
|
||
|
||
#define LCDB_RDSON_MGMNT_REG 0x53
|
||
#define NFET_SW_SIZE_MASK GENMASK(3, 2)
|
||
#define NFET_SW_SIZE_SHIFT 2
|
||
#define PFET_SW_SIZE_MASK GENMASK(1, 0)
|
||
|
||
#define LCDB_BST_VREG_OK_CTL_REG 0x55
|
||
#define BST_VREG_OK_DEB_MASK GENMASK(1, 0)
|
||
|
||
#define LCDB_BST_SS_CTL_REG 0x5B
|
||
#define BST_SS_TIME_MASK GENMASK(1, 0)
|
||
#define BST_PRECHG_SHORT_ALARM_SHIFT 2
|
||
#define BST_PRECHARGE_DONE_DEB_BIT BIT(4)
|
||
#define BST_SS_TIME_OVERRIDE_SHIFT 5
|
||
|
||
#define BST_SS_TIME_OVERRIDE_0MS 0
|
||
#define BST_SS_TIME_OVERRIDE_0P5_MS 1
|
||
#define BST_SS_TIME_OVERRIDE_1MS 2
|
||
#define BST_SS_TIME_OVERRIDE_2MS 3
|
||
|
||
#define EN_BST_PRECHG_SHORT_ALARM 0
|
||
#define DIS_BST_PRECHG_SHORT_ALARM 1
|
||
|
||
#define LCDB_SOFT_START_CTL_REG 0x5F
|
||
|
||
#define LCDB_MISC_CTL_REG 0x60
|
||
#define AUTO_GM_EN_BIT BIT(4)
|
||
#define EN_TOUCH_WAKE_BIT BIT(3)
|
||
#define DIS_SCP_BIT BIT(0)
|
||
|
||
#define LCDB_PFM_CTL_REG 0x62
|
||
#define EN_PFM_BIT BIT(7)
|
||
#define BYP_BST_SOFT_START_COMP_BIT BIT(0)
|
||
#define PFM_HYSTERESIS_SHIFT 4
|
||
#define PFM_CURRENT_SHIFT 2
|
||
|
||
#define LCDB_PWRUP_PWRDN_CTL_REG 0x66
|
||
#define PWRUP_DELAY_MASK GENAMSK(3, 2)
|
||
#define PWRDN_DELAY_MASK GENMASK(1, 0)
|
||
#define PWRDN_DELAY_MIN_MS 0
|
||
#define PWRDN_DELAY_MAX_MS 8
|
||
|
||
/* LDO */
|
||
#define LCDB_LDO_OUTPUT_VOLTAGE_REG 0x71
|
||
#define SET_OUTPUT_VOLTAGE_MASK GENMASK(4, 0)
|
||
|
||
#define LCDB_LDO_VREG_OK_CTL_REG 0x75
|
||
#define VREG_OK_DEB_MASK GENMASK(1, 0)
|
||
|
||
#define LCDB_LDO_PD_CTL_REG 0x77
|
||
#define LDO_DIS_PULLDOWN_BIT BIT(1)
|
||
#define LDO_PD_STRENGTH_BIT BIT(0)
|
||
|
||
#define LCDB_LDO_FORCE_PD_CTL_REG 0x79
|
||
#define LDO_FORCE_PD_EN_BIT BIT(0)
|
||
#define LDO_FORCE_PD_MODE BIT(7)
|
||
|
||
#define LCDB_LDO_ILIM_CTL1_REG 0x7B
|
||
#define EN_LDO_ILIM_BIT BIT(7)
|
||
#define SET_LDO_ILIM_MASK GENMASK(2, 0)
|
||
#define MIN_LDO_ILIM_MA 110
|
||
#define MAX_LDO_ILIM_MA 460
|
||
#define LDO_ILIM_STEP_MA 50
|
||
|
||
#define LCDB_LDO_ILIM_CTL2_REG 0x7C
|
||
|
||
#define LCDB_LDO_SOFT_START_CTL_REG 0x7F
|
||
#define SOFT_START_MASK GENMASK(1, 0)
|
||
|
||
/* NCP */
|
||
#define LCDB_NCP_OUTPUT_VOLTAGE_REG 0x81
|
||
|
||
#define LCDB_NCP_VREG_OK_CTL_REG 0x85
|
||
|
||
#define LCDB_NCP_PD_CTL_REG 0x87
|
||
#define NCP_DIS_PULLDOWN_BIT BIT(1)
|
||
#define NCP_PD_STRENGTH_BIT BIT(0)
|
||
|
||
#define LCDB_NCP_ILIM_CTL1_REG 0x8B
|
||
#define EN_NCP_ILIM_BIT BIT(7)
|
||
#define SET_NCP_ILIM_MASK GENMASK(1, 0)
|
||
#define MIN_NCP_ILIM_MA 260
|
||
#define MAX_NCP_ILIM_MA 810
|
||
|
||
#define LCDB_NCP_ILIM_CTL2_REG 0x8C
|
||
|
||
#define LCDB_NCP_SOFT_START_CTL_REG 0x8F
|
||
|
||
/* common for BST/NCP/LDO */
|
||
#define MIN_DBC_US 2
|
||
#define MAX_DBC_US 32
|
||
|
||
#define MIN_SOFT_START_US 0
|
||
#define MAX_SOFT_START_US 2000
|
||
|
||
#define PM660_BST_HEADROOM_DEFAULT_MV 200
|
||
#define BST_HEADROOM_DEFAULT_MV 150
|
||
|
||
#define PMIC5_LCDB_OFF_ON_DELAY_US 20000
|
||
|
||
struct ldo_regulator {
|
||
struct regulator_desc rdesc;
|
||
struct regulator_dev *rdev;
|
||
struct device_node *node;
|
||
|
||
/* LDO DT params */
|
||
int pd;
|
||
int pd_strength;
|
||
int ilim_ma;
|
||
int soft_start_us;
|
||
int vreg_ok_dbc_us;
|
||
int voltage_mv;
|
||
int prev_voltage_mv;
|
||
};
|
||
|
||
struct ncp_regulator {
|
||
struct regulator_desc rdesc;
|
||
struct regulator_dev *rdev;
|
||
struct device_node *node;
|
||
|
||
/* NCP DT params */
|
||
int pd;
|
||
int pd_strength;
|
||
int ilim_ma;
|
||
int soft_start_us;
|
||
int vreg_ok_dbc_us;
|
||
int voltage_mv;
|
||
int prev_voltage_mv;
|
||
};
|
||
|
||
struct bst_params {
|
||
struct device_node *node;
|
||
|
||
/* BST DT params */
|
||
int pd;
|
||
int pd_strength;
|
||
int ilim_ma;
|
||
int ps;
|
||
int ps_threshold;
|
||
int soft_start_us;
|
||
int vreg_ok_dbc_us;
|
||
int voltage_mv;
|
||
u16 headroom_mv;
|
||
};
|
||
|
||
struct qpnp_lcdb {
|
||
struct device *dev;
|
||
struct platform_device *pdev;
|
||
struct regmap *regmap;
|
||
struct class lcdb_class;
|
||
struct pmic_revid_data *pmic_rev_id;
|
||
u32 base;
|
||
u32 wa_flags;
|
||
int sc_irq;
|
||
int pwrdn_delay_ms;
|
||
|
||
/* TTW params */
|
||
bool ttw_enable;
|
||
bool ttw_mode_sw;
|
||
|
||
/* status parameters */
|
||
bool lcdb_enabled;
|
||
bool settings_saved;
|
||
bool lcdb_sc_disable;
|
||
bool voltage_step_ramp;
|
||
/* Tracks the secure UI mode entry/exit */
|
||
bool secure_mode;
|
||
int sc_count;
|
||
ktime_t sc_module_enable_time;
|
||
|
||
struct mutex lcdb_mutex;
|
||
struct mutex read_write_mutex;
|
||
struct bst_params bst;
|
||
struct ldo_regulator ldo;
|
||
struct ncp_regulator ncp;
|
||
};
|
||
|
||
struct settings {
|
||
u16 address;
|
||
u8 value;
|
||
bool sec_access;
|
||
bool valid;
|
||
};
|
||
|
||
enum lcdb_module {
|
||
LDO,
|
||
NCP,
|
||
BST,
|
||
LDO_NCP,
|
||
};
|
||
|
||
enum pfm_hysteresis {
|
||
PFM_HYST_15MV,
|
||
PFM_HYST_25MV,
|
||
PFM_HYST_35MV,
|
||
PFM_HYST_45MV,
|
||
};
|
||
|
||
enum pfm_peak_current {
|
||
PFM_PEAK_CURRENT_300MA,
|
||
PFM_PEAK_CURRENT_400MA,
|
||
PFM_PEAK_CURRENT_500MA,
|
||
PFM_PEAK_CURRENT_600MA,
|
||
};
|
||
|
||
enum rdson_fet_size {
|
||
RDSON_QUARTER,
|
||
RDSON_HALF,
|
||
RDSON_THREE_FOURTH,
|
||
RDSON_FULLSIZE,
|
||
};
|
||
|
||
enum lcdb_settings_index {
|
||
LCDB_BST_PD_CTL = 0,
|
||
LCDB_RDSON_MGMNT,
|
||
LCDB_MISC_CTL,
|
||
LCDB_SOFT_START_CTL,
|
||
LCDB_PFM_CTL,
|
||
LCDB_PWRUP_PWRDN_CTL,
|
||
LCDB_LDO_PD_CTL,
|
||
LCDB_LDO_SOFT_START_CTL,
|
||
LCDB_NCP_PD_CTL,
|
||
LCDB_NCP_SOFT_START_CTL,
|
||
LCDB_BST_SS_CTL,
|
||
LCDB_LDO_VREG_OK_CTL,
|
||
LCDB_SETTING_MAX,
|
||
};
|
||
|
||
enum lcdb_wa_flags {
|
||
NCP_SCP_DISABLE_WA = BIT(0),
|
||
FORCE_PD_ENABLE_WA = BIT(1),
|
||
};
|
||
|
||
static u32 soft_start_us[] = {
|
||
0,
|
||
500,
|
||
1000,
|
||
2000,
|
||
};
|
||
|
||
static u32 dbc_us[] = {
|
||
2,
|
||
4,
|
||
16,
|
||
32,
|
||
};
|
||
|
||
static u32 ncp_ilim_ma[] = {
|
||
260,
|
||
460,
|
||
640,
|
||
810,
|
||
};
|
||
|
||
static const u32 pwrup_pwrdn_ms[] = {
|
||
0,
|
||
1,
|
||
4,
|
||
8,
|
||
};
|
||
|
||
#define SETTING(_id, _sec_access, _valid) \
|
||
[_id] = { \
|
||
.address = _id##_REG, \
|
||
.sec_access = _sec_access, \
|
||
.valid = _valid \
|
||
} \
|
||
|
||
static int qpnp_lcdb_set_voltage_step(struct qpnp_lcdb *lcdb,
|
||
int voltage_start_mv, u8 type);
|
||
|
||
static int qpnp_lcdb_set_voltage(struct qpnp_lcdb *lcdb,
|
||
int voltage_mv, u8 type);
|
||
|
||
static bool is_between(int value, int min, int max)
|
||
{
|
||
if (value < min || value > max)
|
||
return false;
|
||
return true;
|
||
}
|
||
|
||
static int qpnp_lcdb_read(struct qpnp_lcdb *lcdb,
|
||
u16 addr, u8 *value, u8 count)
|
||
{
|
||
int rc = 0;
|
||
|
||
mutex_lock(&lcdb->read_write_mutex);
|
||
rc = regmap_bulk_read(lcdb->regmap, addr, value, count);
|
||
if (rc < 0)
|
||
pr_err("Failed to read from addr=0x%02x rc=%d\n", addr, rc);
|
||
mutex_unlock(&lcdb->read_write_mutex);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_write(struct qpnp_lcdb *lcdb,
|
||
u16 addr, u8 *value, u8 count)
|
||
{
|
||
int rc;
|
||
|
||
mutex_lock(&lcdb->read_write_mutex);
|
||
rc = regmap_bulk_write(lcdb->regmap, addr, value, count);
|
||
if (rc < 0)
|
||
pr_err("Failed to write to addr=0x%02x rc=%d\n", addr, rc);
|
||
mutex_unlock(&lcdb->read_write_mutex);
|
||
|
||
return rc;
|
||
}
|
||
|
||
#define SEC_ADDRESS_REG 0xD0
|
||
#define SECURE_UNLOCK_VALUE 0xA5
|
||
static int qpnp_lcdb_secure_write(struct qpnp_lcdb *lcdb,
|
||
u16 addr, u8 value)
|
||
{
|
||
int rc;
|
||
u8 val = SECURE_UNLOCK_VALUE;
|
||
u8 pmic_subtype = lcdb->pmic_rev_id->pmic_subtype;
|
||
|
||
mutex_lock(&lcdb->read_write_mutex);
|
||
if (pmic_subtype == PM660L_SUBTYPE) {
|
||
rc = regmap_write(lcdb->regmap, lcdb->base + SEC_ADDRESS_REG,
|
||
val);
|
||
if (rc < 0) {
|
||
pr_err("Failed to unlock register rc=%d\n", rc);
|
||
goto fail_write;
|
||
}
|
||
}
|
||
rc = regmap_write(lcdb->regmap, addr, value);
|
||
if (rc < 0)
|
||
pr_err("Failed to write to addr=0x%02x rc=%d\n", addr, rc);
|
||
|
||
fail_write:
|
||
mutex_unlock(&lcdb->read_write_mutex);
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_masked_write(struct qpnp_lcdb *lcdb,
|
||
u16 addr, u8 mask, u8 value)
|
||
{
|
||
int rc = 0;
|
||
|
||
mutex_lock(&lcdb->read_write_mutex);
|
||
rc = regmap_update_bits(lcdb->regmap, addr, mask, value);
|
||
if (rc < 0)
|
||
pr_err("Failed to write addr=0x%02x value=0x%02x rc=%d\n",
|
||
addr, value, rc);
|
||
mutex_unlock(&lcdb->read_write_mutex);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static bool is_lcdb_enabled(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc;
|
||
u8 val = 0;
|
||
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base + LCDB_ENABLE_CTL1_REG, &val, 1);
|
||
if (rc < 0)
|
||
pr_err("Failed to read ENABLE_CTL1 rc=%d\n", rc);
|
||
|
||
return rc ? false : !!(val & MODULE_EN_BIT);
|
||
}
|
||
|
||
static int dump_status_registers(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0;
|
||
u8 sts[6] = {0};
|
||
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_STS1_REG, &sts[0], 6);
|
||
if (rc < 0) {
|
||
pr_err("Failed to write to STS registers rc=%d\n", rc);
|
||
} else {
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base + LCDB_STS1_REG, sts, 6);
|
||
if (rc < 0)
|
||
pr_err("Failed to read lcdb status rc=%d\n", rc);
|
||
else
|
||
pr_err("STS1=0x%02x STS2=0x%02x STS3=0x%02x STS4=0x%02x STS5=0x%02x, STS6=0x%02x\n",
|
||
sts[0], sts[1], sts[2], sts[3], sts[4], sts[5]);
|
||
}
|
||
|
||
return rc;
|
||
}
|
||
|
||
static struct settings lcdb_settings_pm660l[] = {
|
||
SETTING(LCDB_BST_PD_CTL, false, true),
|
||
SETTING(LCDB_RDSON_MGMNT, false, true),
|
||
SETTING(LCDB_MISC_CTL, false, true),
|
||
SETTING(LCDB_SOFT_START_CTL, false, true),
|
||
SETTING(LCDB_PFM_CTL, false, true),
|
||
SETTING(LCDB_PWRUP_PWRDN_CTL, true, true),
|
||
SETTING(LCDB_LDO_PD_CTL, false, true),
|
||
SETTING(LCDB_LDO_SOFT_START_CTL, false, true),
|
||
SETTING(LCDB_NCP_PD_CTL, false, true),
|
||
SETTING(LCDB_NCP_SOFT_START_CTL, false, true),
|
||
SETTING(LCDB_BST_SS_CTL, false, false),
|
||
SETTING(LCDB_LDO_VREG_OK_CTL, false, false),
|
||
};
|
||
|
||
/* For PMICs like pmi632/pm8150L */
|
||
static struct settings lcdb_settings[] = {
|
||
SETTING(LCDB_BST_PD_CTL, false, true),
|
||
SETTING(LCDB_RDSON_MGMNT, false, false),
|
||
SETTING(LCDB_MISC_CTL, false, false),
|
||
SETTING(LCDB_SOFT_START_CTL, false, false),
|
||
SETTING(LCDB_PFM_CTL, false, false),
|
||
SETTING(LCDB_PWRUP_PWRDN_CTL, false, true),
|
||
SETTING(LCDB_LDO_PD_CTL, false, true),
|
||
SETTING(LCDB_LDO_SOFT_START_CTL, false, true),
|
||
SETTING(LCDB_NCP_PD_CTL, false, true),
|
||
SETTING(LCDB_NCP_SOFT_START_CTL, false, true),
|
||
SETTING(LCDB_BST_SS_CTL, false, true),
|
||
SETTING(LCDB_LDO_VREG_OK_CTL, false, true),
|
||
};
|
||
|
||
static int qpnp_lcdb_save_settings(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int i, size, rc = 0;
|
||
struct settings *setting;
|
||
u16 pmic_subtype = lcdb->pmic_rev_id->pmic_subtype;
|
||
|
||
if (pmic_subtype == PM660L_SUBTYPE) {
|
||
setting = lcdb_settings_pm660l;
|
||
size = ARRAY_SIZE(lcdb_settings_pm660l);
|
||
} else {
|
||
setting = lcdb_settings;
|
||
size = ARRAY_SIZE(lcdb_settings);
|
||
}
|
||
|
||
for (i = 0; i < size; i++) {
|
||
if (setting[i].valid) {
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base +
|
||
setting[i].address,
|
||
&setting[i].value, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to read lcdb register address=%x\n",
|
||
setting[i].address);
|
||
return rc;
|
||
}
|
||
}
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int qpnp_lcdb_restore_settings(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int i, size, rc = 0;
|
||
struct settings *setting;
|
||
u16 pmic_subtype = lcdb->pmic_rev_id->pmic_subtype;
|
||
|
||
if (pmic_subtype == PM660L_SUBTYPE) {
|
||
setting = lcdb_settings_pm660l;
|
||
size = ARRAY_SIZE(lcdb_settings_pm660l);
|
||
} else {
|
||
setting = lcdb_settings;
|
||
size = ARRAY_SIZE(lcdb_settings);
|
||
}
|
||
|
||
for (i = 0; i < size; i++) {
|
||
if (setting[i].valid) {
|
||
if (setting[i].sec_access)
|
||
rc = qpnp_lcdb_secure_write(lcdb, lcdb->base +
|
||
setting[i].address,
|
||
setting[i].value);
|
||
else
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base +
|
||
setting[i].address,
|
||
&setting[i].value, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to write register address=%x\n",
|
||
setting[i].address);
|
||
return rc;
|
||
}
|
||
}
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int qpnp_lcdb_ttw_enter(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc;
|
||
u8 val;
|
||
|
||
if (!lcdb->settings_saved) {
|
||
rc = qpnp_lcdb_save_settings(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to save LCDB settings rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
lcdb->settings_saved = true;
|
||
}
|
||
|
||
val = (BST_SS_TIME_OVERRIDE_1MS << BST_SS_TIME_OVERRIDE_SHIFT) |
|
||
(DIS_BST_PRECHG_SHORT_ALARM << BST_PRECHG_SHORT_ALARM_SHIFT);
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_BST_SS_CTL_REG, &val, 1);
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
val = 0;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_NCP_SOFT_START_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
val = 0;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_LDO_SOFT_START_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
val = 0;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_PWRUP_PWRDN_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
val = 0;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_BST_VREG_OK_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
val = BOOST_DIS_PULLDOWN_BIT;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_BST_PD_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
val = LDO_DIS_PULLDOWN_BIT;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_LDO_PD_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
val = NCP_DIS_PULLDOWN_BIT;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_NCP_PD_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
val = HWEN_RDY_BIT;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_ENABLE_CTL1_REG,
|
||
&val, 1);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_ttw_enter_pm660l(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc;
|
||
u8 val;
|
||
|
||
if (!lcdb->settings_saved) {
|
||
rc = qpnp_lcdb_save_settings(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to save LCDB settings rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
lcdb->settings_saved = true;
|
||
}
|
||
|
||
val = BOOST_DIS_PULLDOWN_BIT;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_BST_PD_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set BST PD rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
val = (RDSON_HALF << NFET_SW_SIZE_SHIFT) | RDSON_HALF;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_RDSON_MGMNT_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set RDSON MGMT rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
val = AUTO_GM_EN_BIT | EN_TOUCH_WAKE_BIT | DIS_SCP_BIT;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_MISC_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set MISC CTL rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
val = 0;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_SOFT_START_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set LCDB_SOFT_START rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
val = EN_PFM_BIT | (PFM_HYST_25MV << PFM_HYSTERESIS_SHIFT) |
|
||
(PFM_PEAK_CURRENT_400MA << PFM_CURRENT_SHIFT) |
|
||
BYP_BST_SOFT_START_COMP_BIT;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_PFM_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set PFM_CTL rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
val = 0;
|
||
rc = qpnp_lcdb_secure_write(lcdb, lcdb->base + LCDB_PWRUP_PWRDN_CTL_REG,
|
||
val);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set PWRUP_PWRDN_CTL rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
val = LDO_DIS_PULLDOWN_BIT;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_LDO_PD_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set LDO_PD_CTL rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
val = 0;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_LDO_SOFT_START_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set LDO_SOFT_START rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
val = NCP_DIS_PULLDOWN_BIT;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_NCP_PD_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set NCP_PD_CTL rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
val = 0;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_NCP_SOFT_START_CTL_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set NCP_SOFT_START rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
if (lcdb->ttw_mode_sw) {
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_AUTO_TOUCH_WAKE_CTL_REG,
|
||
EN_AUTO_TOUCH_WAKE_BIT,
|
||
EN_AUTO_TOUCH_WAKE_BIT);
|
||
if (rc < 0)
|
||
pr_err("Failed to enable auto(sw) TTW\n rc = %d\n", rc);
|
||
} else {
|
||
val = HWEN_RDY_BIT;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_ENABLE_CTL1_REG,
|
||
&val, 1);
|
||
if (rc < 0)
|
||
pr_err("Failed to hw_enable lcdb rc= %d\n", rc);
|
||
}
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_ttw_exit(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc;
|
||
|
||
if (lcdb->settings_saved) {
|
||
rc = qpnp_lcdb_restore_settings(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to restore lcdb settings rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
lcdb->settings_saved = false;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int qpnp_lcdb_enable_wa(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc;
|
||
u8 val = 0;
|
||
|
||
/* required only for PM660L */
|
||
if (lcdb->pmic_rev_id->pmic_subtype != PM660L_SUBTYPE)
|
||
return 0;
|
||
|
||
val = MODULE_EN_BIT;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_ENABLE_CTL1_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to enable lcdb rc= %d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
val = 0;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_ENABLE_CTL1_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to disable lcdb rc= %d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
if (lcdb->wa_flags & NCP_SCP_DISABLE_WA) {
|
||
/*
|
||
* delay to make sure that the MID pin – ie the
|
||
* output of the LCDB boost – returns to 0V
|
||
* after the module is disabled
|
||
*/
|
||
usleep_range(10000, 10100);
|
||
|
||
rc = qpnp_lcdb_masked_write(lcdb,
|
||
lcdb->base + LCDB_MISC_CTL_REG,
|
||
DIS_SCP_BIT, DIS_SCP_BIT);
|
||
if (rc < 0) {
|
||
pr_err("Failed to disable SC rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
/* delay for SC-disable to take effect */
|
||
usleep_range(1000, 1100);
|
||
|
||
rc = qpnp_lcdb_masked_write(lcdb,
|
||
lcdb->base + LCDB_MISC_CTL_REG,
|
||
DIS_SCP_BIT, 0);
|
||
if (rc < 0) {
|
||
pr_err("Failed to enable SC rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
/* delay for SC-enable to take effect */
|
||
usleep_range(1000, 1100);
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
#define VOLTAGE_START_MV 4500
|
||
#define VOLTAGE_STEP_MV 500
|
||
|
||
static int qpnp_lcdb_enable(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0, timeout, delay;
|
||
int voltage_mv = VOLTAGE_START_MV;
|
||
u8 val = 0;
|
||
|
||
if (lcdb->lcdb_enabled || lcdb->lcdb_sc_disable) {
|
||
pr_debug("lcdb_enabled=%d lcdb_sc_disable=%d\n",
|
||
lcdb->lcdb_enabled, lcdb->lcdb_sc_disable);
|
||
return 0;
|
||
}
|
||
|
||
if (lcdb->ttw_enable) {
|
||
rc = qpnp_lcdb_ttw_exit(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to exit TTW mode rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
rc = qpnp_lcdb_enable_wa(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to execute enable_wa rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
if (lcdb->voltage_step_ramp) {
|
||
if (lcdb->ldo.voltage_mv < VOLTAGE_START_MV)
|
||
voltage_mv = lcdb->ldo.voltage_mv;
|
||
|
||
rc = qpnp_lcdb_set_voltage(lcdb, voltage_mv, LDO);
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
if (lcdb->ncp.voltage_mv < VOLTAGE_START_MV)
|
||
voltage_mv = lcdb->ncp.voltage_mv;
|
||
|
||
rc = qpnp_lcdb_set_voltage(lcdb, voltage_mv, NCP);
|
||
if (rc < 0)
|
||
return rc;
|
||
}
|
||
|
||
val = MODULE_EN_BIT;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_ENABLE_CTL1_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to disable lcdb rc= %d\n", rc);
|
||
goto fail_enable;
|
||
}
|
||
|
||
/* poll for vreg_ok */
|
||
timeout = 10;
|
||
delay = lcdb->bst.soft_start_us + lcdb->ldo.soft_start_us +
|
||
lcdb->ncp.soft_start_us;
|
||
delay += lcdb->bst.vreg_ok_dbc_us + lcdb->ldo.vreg_ok_dbc_us +
|
||
lcdb->ncp.vreg_ok_dbc_us;
|
||
while (timeout--) {
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base + INT_RT_STATUS_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to poll for vreg-ok status rc=%d\n", rc);
|
||
break;
|
||
}
|
||
if (val & VREG_OK_RT_STS_BIT)
|
||
break;
|
||
|
||
usleep_range(delay, delay + 100);
|
||
}
|
||
|
||
if (rc || !timeout) {
|
||
if (!timeout) {
|
||
pr_err("lcdb-vreg-ok status failed to change\n");
|
||
rc = -ETIMEDOUT;
|
||
}
|
||
goto fail_enable;
|
||
}
|
||
|
||
lcdb->lcdb_enabled = true;
|
||
if (lcdb->voltage_step_ramp) {
|
||
usleep_range(10000, 11000);
|
||
rc = qpnp_lcdb_set_voltage_step(lcdb,
|
||
voltage_mv + VOLTAGE_STEP_MV,
|
||
LDO_NCP);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set LCDB voltage rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
pr_debug("lcdb enabled successfully!\n");
|
||
|
||
return 0;
|
||
|
||
fail_enable:
|
||
dump_status_registers(lcdb);
|
||
pr_err("Failed to enable lcdb rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_disable(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0;
|
||
u8 val;
|
||
u16 pmic_subtype = lcdb->pmic_rev_id->pmic_subtype;
|
||
|
||
if (!lcdb->lcdb_enabled)
|
||
return 0;
|
||
|
||
if (lcdb->ttw_enable) {
|
||
if (pmic_subtype == PM660L_SUBTYPE)
|
||
rc = qpnp_lcdb_ttw_enter_pm660l(lcdb);
|
||
else
|
||
rc = qpnp_lcdb_ttw_enter(lcdb);
|
||
|
||
if (rc < 0) {
|
||
pr_err("Failed to enable TTW mode rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
lcdb->lcdb_enabled = false;
|
||
|
||
return 0;
|
||
}
|
||
|
||
if (lcdb->wa_flags & FORCE_PD_ENABLE_WA) {
|
||
/*
|
||
* force pull-down to enable quick discharge after
|
||
* turning off
|
||
*/
|
||
val = LDO_FORCE_PD_EN_BIT | LDO_FORCE_PD_MODE;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base +
|
||
LCDB_LDO_FORCE_PD_CTL_REG, &val, 1);
|
||
if (rc < 0)
|
||
return rc;
|
||
}
|
||
|
||
val = 0;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base + LCDB_ENABLE_CTL1_REG,
|
||
&val, 1);
|
||
if (rc < 0)
|
||
pr_err("Failed to disable lcdb rc= %d\n", rc);
|
||
else
|
||
lcdb->lcdb_enabled = false;
|
||
|
||
if (lcdb->wa_flags & FORCE_PD_ENABLE_WA) {
|
||
/* wait for 10 msec after module disable for LDO to discharge */
|
||
usleep_range(10000, 11000);
|
||
|
||
val = 0;
|
||
rc = qpnp_lcdb_write(lcdb, lcdb->base +
|
||
LCDB_LDO_FORCE_PD_CTL_REG, &val, 1);
|
||
if (rc < 0)
|
||
return rc;
|
||
}
|
||
|
||
return rc;
|
||
}
|
||
|
||
#define LCDB_SC_RESET_CNT_DLY_US 1000000
|
||
#define LCDB_SC_CNT_MAX 10
|
||
static int qpnp_lcdb_handle_sc_event(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0;
|
||
s64 elapsed_time_us;
|
||
|
||
mutex_lock(&lcdb->lcdb_mutex);
|
||
rc = qpnp_lcdb_disable(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to disable lcdb rc=%d\n", rc);
|
||
goto unlock_mutex;
|
||
}
|
||
|
||
/* Check if the SC re-occurred immediately */
|
||
elapsed_time_us = ktime_us_delta(ktime_get(),
|
||
lcdb->sc_module_enable_time);
|
||
if (elapsed_time_us > LCDB_SC_RESET_CNT_DLY_US) {
|
||
lcdb->sc_count = 0;
|
||
} else if (lcdb->sc_count > LCDB_SC_CNT_MAX) {
|
||
pr_err("SC trigged %d times, disabling LCDB forever!\n",
|
||
lcdb->sc_count);
|
||
lcdb->lcdb_sc_disable = true;
|
||
goto unlock_mutex;
|
||
}
|
||
lcdb->sc_count++;
|
||
lcdb->sc_module_enable_time = ktime_get();
|
||
|
||
/* delay for SC to clear */
|
||
usleep_range(10000, 10100);
|
||
|
||
rc = qpnp_lcdb_enable(lcdb);
|
||
if (rc < 0)
|
||
pr_err("Failed to enable lcdb rc=%d\n", rc);
|
||
|
||
unlock_mutex:
|
||
mutex_unlock(&lcdb->lcdb_mutex);
|
||
return rc;
|
||
}
|
||
|
||
static irqreturn_t qpnp_lcdb_sc_irq_handler(int irq, void *data)
|
||
{
|
||
struct qpnp_lcdb *lcdb = data;
|
||
int rc;
|
||
u8 val, val2[2] = {0};
|
||
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base + INT_RT_STATUS_REG, &val, 1);
|
||
if (rc < 0)
|
||
goto irq_handled;
|
||
|
||
if (val & SC_ERROR_RT_STS_BIT) {
|
||
rc = qpnp_lcdb_read(lcdb,
|
||
lcdb->base + LCDB_MISC_CTL_REG, &val, 1);
|
||
if (rc < 0)
|
||
goto irq_handled;
|
||
|
||
if (val & EN_TOUCH_WAKE_BIT) {
|
||
/* blanking time */
|
||
usleep_range(300, 310);
|
||
/*
|
||
* The status registers need to written with any value
|
||
* before reading
|
||
*/
|
||
rc = qpnp_lcdb_write(lcdb,
|
||
lcdb->base + LCDB_STS3_REG, val2, 2);
|
||
if (rc < 0)
|
||
goto irq_handled;
|
||
|
||
rc = qpnp_lcdb_read(lcdb,
|
||
lcdb->base + LCDB_STS3_REG, val2, 2);
|
||
if (rc < 0)
|
||
goto irq_handled;
|
||
|
||
if (!(val2[0] & LDO_VREG_OK_BIT) ||
|
||
!(val2[1] & NCP_VREG_OK_BIT)) {
|
||
rc = qpnp_lcdb_handle_sc_event(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to handle SC rc=%d\n",
|
||
rc);
|
||
goto irq_handled;
|
||
}
|
||
}
|
||
} else {
|
||
/* blanking time */
|
||
usleep_range(2000, 2100);
|
||
/* Read the SC status again to confirm true SC */
|
||
rc = qpnp_lcdb_read(lcdb,
|
||
lcdb->base + INT_RT_STATUS_REG, &val, 1);
|
||
if (rc < 0)
|
||
goto irq_handled;
|
||
|
||
if (val & SC_ERROR_RT_STS_BIT) {
|
||
rc = qpnp_lcdb_handle_sc_event(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to handle SC rc=%d\n",
|
||
rc);
|
||
goto irq_handled;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
irq_handled:
|
||
return IRQ_HANDLED;
|
||
}
|
||
|
||
#define MIN_BST_VOLTAGE_MV 4700
|
||
#define PM660_MAX_BST_VOLTAGE_MV 6250
|
||
#define MAX_BST_VOLTAGE_MV 6275
|
||
#define MIN_VOLTAGE_MV 4000
|
||
#define MAX_VOLTAGE_MV 6000
|
||
#define VOLTAGE_MIN_STEP_100_MV 4000
|
||
#define VOLTAGE_MIN_STEP_50_MV 4950
|
||
#define VOLTAGE_STEP_100_MV 100
|
||
#define VOLTAGE_STEP_50_MV 50
|
||
#define VOLTAGE_STEP_25_MV 25
|
||
#define VOLTAGE_STEP_50MV_OFFSET 0xA
|
||
static int qpnp_lcdb_set_bst_voltage(struct qpnp_lcdb *lcdb,
|
||
int voltage_mv, u8 type)
|
||
{
|
||
int rc = 0;
|
||
u8 val, voltage_step, mask = 0;
|
||
int bst_voltage_mv;
|
||
u16 pmic_subtype = lcdb->pmic_rev_id->pmic_subtype;
|
||
struct ldo_regulator *ldo = &lcdb->ldo;
|
||
struct ncp_regulator *ncp = &lcdb->ncp;
|
||
struct bst_params *bst = &lcdb->bst;
|
||
|
||
/* Vout_Boost = headroom_mv + max( Vout_LDO, abs (Vout_NCP)) */
|
||
bst_voltage_mv = max(voltage_mv, max(ldo->voltage_mv, ncp->voltage_mv));
|
||
bst_voltage_mv += bst->headroom_mv;
|
||
|
||
if (bst_voltage_mv < MIN_BST_VOLTAGE_MV)
|
||
bst_voltage_mv = MIN_BST_VOLTAGE_MV;
|
||
|
||
if (pmic_subtype == PM660L_SUBTYPE) {
|
||
if (bst_voltage_mv > PM660_MAX_BST_VOLTAGE_MV)
|
||
bst_voltage_mv = PM660_MAX_BST_VOLTAGE_MV;
|
||
} else {
|
||
if (bst_voltage_mv > MAX_BST_VOLTAGE_MV)
|
||
bst_voltage_mv = MAX_BST_VOLTAGE_MV;
|
||
}
|
||
|
||
if (bst_voltage_mv != bst->voltage_mv) {
|
||
if (pmic_subtype == PM660L_SUBTYPE) {
|
||
mask = PM660_BST_OUTPUT_VOLTAGE_MASK;
|
||
voltage_step = VOLTAGE_STEP_50_MV;
|
||
} else {
|
||
mask = BST_OUTPUT_VOLTAGE_MASK;
|
||
voltage_step = VOLTAGE_STEP_25_MV;
|
||
}
|
||
|
||
val = DIV_ROUND_UP(bst_voltage_mv - MIN_BST_VOLTAGE_MV,
|
||
voltage_step);
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_BST_OUTPUT_VOLTAGE_REG,
|
||
mask, val);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set boost voltage %d mv rc=%d\n",
|
||
bst_voltage_mv, rc);
|
||
} else {
|
||
pr_debug("Boost voltage set = %d mv (0x%02x = 0x%02x)\n",
|
||
bst_voltage_mv, LCDB_BST_OUTPUT_VOLTAGE_REG, val);
|
||
bst->voltage_mv = bst_voltage_mv;
|
||
}
|
||
}
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_get_bst_voltage(struct qpnp_lcdb *lcdb,
|
||
int *voltage_mv)
|
||
{
|
||
int rc;
|
||
u8 val, voltage_step, mask = 0;
|
||
u16 pmic_subtype = lcdb->pmic_rev_id->pmic_subtype;
|
||
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base + LCDB_BST_OUTPUT_VOLTAGE_REG,
|
||
&val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to reat BST voltage rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
if (pmic_subtype == PM660L_SUBTYPE) {
|
||
mask = PM660_BST_OUTPUT_VOLTAGE_MASK;
|
||
voltage_step = VOLTAGE_STEP_50_MV;
|
||
} else {
|
||
mask = BST_OUTPUT_VOLTAGE_MASK;
|
||
voltage_step = VOLTAGE_STEP_25_MV;
|
||
}
|
||
|
||
val &= mask;
|
||
*voltage_mv = (val * voltage_step) + MIN_BST_VOLTAGE_MV;
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int qpnp_lcdb_set_voltage(struct qpnp_lcdb *lcdb,
|
||
int voltage_mv, u8 type)
|
||
{
|
||
int rc = 0;
|
||
u16 offset = LCDB_LDO_OUTPUT_VOLTAGE_REG;
|
||
u8 val = 0;
|
||
|
||
if (!is_between(voltage_mv, MIN_VOLTAGE_MV, MAX_VOLTAGE_MV)) {
|
||
pr_err("Invalid voltage %dmv (min=%d max=%d)\n",
|
||
voltage_mv, MIN_VOLTAGE_MV, MAX_VOLTAGE_MV);
|
||
return -EINVAL;
|
||
}
|
||
|
||
rc = qpnp_lcdb_set_bst_voltage(lcdb, voltage_mv, type);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set boost voltage rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
/* Below logic is only valid for LDO and NCP type */
|
||
if (voltage_mv < VOLTAGE_MIN_STEP_50_MV) {
|
||
val = DIV_ROUND_UP(voltage_mv - VOLTAGE_MIN_STEP_100_MV,
|
||
VOLTAGE_STEP_100_MV);
|
||
} else {
|
||
val = DIV_ROUND_UP(voltage_mv - VOLTAGE_MIN_STEP_50_MV,
|
||
VOLTAGE_STEP_50_MV);
|
||
val += VOLTAGE_STEP_50MV_OFFSET;
|
||
}
|
||
|
||
if (type == NCP)
|
||
offset = LCDB_NCP_OUTPUT_VOLTAGE_REG;
|
||
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base + offset,
|
||
SET_OUTPUT_VOLTAGE_MASK, val);
|
||
if (rc < 0)
|
||
pr_err("Failed to set output voltage %d mv for %s rc=%d\n",
|
||
voltage_mv, (type == LDO) ? "LDO" : "NCP", rc);
|
||
else
|
||
pr_debug("%s voltage set = %d mv (0x%02x = 0x%02x)\n",
|
||
(type == LDO) ? "LDO" : "NCP", voltage_mv, offset, val);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_set_voltage_step(struct qpnp_lcdb *lcdb,
|
||
int voltage_start_mv, u8 type)
|
||
{
|
||
int i, ldo_voltage, ncp_voltage, voltage, rc = 0;
|
||
|
||
for (i = voltage_start_mv; i <= (MAX_VOLTAGE_MV + VOLTAGE_STEP_MV);
|
||
i += VOLTAGE_STEP_MV) {
|
||
|
||
ldo_voltage = (lcdb->ldo.voltage_mv < i) ?
|
||
lcdb->ldo.voltage_mv : i;
|
||
|
||
ncp_voltage = (lcdb->ncp.voltage_mv < i) ?
|
||
lcdb->ncp.voltage_mv : i;
|
||
if (type == LDO_NCP) {
|
||
rc = qpnp_lcdb_set_voltage(lcdb, ldo_voltage, LDO);
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
rc = qpnp_lcdb_set_voltage(lcdb, ncp_voltage, NCP);
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
pr_debug(" LDO voltage step %d NCP voltage step %d\n",
|
||
ldo_voltage, ncp_voltage);
|
||
|
||
if ((i >= lcdb->ncp.voltage_mv) &&
|
||
(i >= lcdb->ldo.voltage_mv))
|
||
break;
|
||
} else {
|
||
voltage = (type == LDO) ? ldo_voltage : ncp_voltage;
|
||
rc = qpnp_lcdb_set_voltage(lcdb, voltage, type);
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
pr_debug("%s voltage step %d\n",
|
||
(type == LDO) ? "LDO" : "NCP", voltage);
|
||
if ((type == LDO) && (i >= lcdb->ldo.voltage_mv))
|
||
break;
|
||
|
||
if ((type == NCP) && (i >= lcdb->ncp.voltage_mv))
|
||
break;
|
||
|
||
}
|
||
|
||
usleep_range(1000, 1100);
|
||
}
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_get_voltage(struct qpnp_lcdb *lcdb,
|
||
u32 *voltage_mv, u8 type)
|
||
{
|
||
int rc = 0;
|
||
u16 offset = LCDB_LDO_OUTPUT_VOLTAGE_REG;
|
||
u8 val = 0;
|
||
|
||
if (type == BST)
|
||
return qpnp_lcdb_get_bst_voltage(lcdb, voltage_mv);
|
||
|
||
if (type == NCP)
|
||
offset = LCDB_NCP_OUTPUT_VOLTAGE_REG;
|
||
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base + offset, &val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to read %s volatge rc=%d\n",
|
||
(type == LDO) ? "LDO" : "NCP", rc);
|
||
return rc;
|
||
}
|
||
|
||
val &= SET_OUTPUT_VOLTAGE_MASK;
|
||
if (val < VOLTAGE_STEP_50MV_OFFSET) {
|
||
*voltage_mv = VOLTAGE_MIN_STEP_100_MV +
|
||
(val * VOLTAGE_STEP_100_MV);
|
||
} else {
|
||
*voltage_mv = VOLTAGE_MIN_STEP_50_MV +
|
||
((val - VOLTAGE_STEP_50MV_OFFSET) * VOLTAGE_STEP_50_MV);
|
||
}
|
||
|
||
if (!rc)
|
||
pr_debug("%s voltage read-back = %d mv (0x%02x = 0x%02x)\n",
|
||
(type == LDO) ? "LDO" : "NCP",
|
||
*voltage_mv, offset, val);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_set_soft_start(struct qpnp_lcdb *lcdb,
|
||
u32 ss_us, u8 type)
|
||
{
|
||
int rc = 0, i = 0;
|
||
u16 offset = LCDB_LDO_SOFT_START_CTL_REG;
|
||
u8 val = 0;
|
||
|
||
if (type == NCP)
|
||
offset = LCDB_NCP_SOFT_START_CTL_REG;
|
||
|
||
if (!is_between(ss_us, MIN_SOFT_START_US, MAX_SOFT_START_US)) {
|
||
pr_err("Invalid soft_start_us %d (min=%d max=%d)\n",
|
||
ss_us, MIN_SOFT_START_US, MAX_SOFT_START_US);
|
||
return -EINVAL;
|
||
}
|
||
|
||
i = 0;
|
||
while (ss_us > soft_start_us[i])
|
||
i++;
|
||
val = ((i == 0) ? 0 : i - 1) & SOFT_START_MASK;
|
||
|
||
rc = qpnp_lcdb_masked_write(lcdb,
|
||
lcdb->base + offset, SOFT_START_MASK, val);
|
||
if (rc < 0)
|
||
pr_err("Failed to write %s soft-start time %d rc=%d\n",
|
||
(type == LDO) ? "LDO" : "NCP", soft_start_us[i], rc);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_ldo_regulator_enable(struct regulator_dev *rdev)
|
||
{
|
||
int rc = 0;
|
||
struct qpnp_lcdb *lcdb = rdev_get_drvdata(rdev);
|
||
|
||
if (lcdb->secure_mode)
|
||
return 0;
|
||
|
||
mutex_lock(&lcdb->lcdb_mutex);
|
||
rc = qpnp_lcdb_enable(lcdb);
|
||
if (rc < 0)
|
||
pr_err("Failed to enable lcdb rc=%d\n", rc);
|
||
mutex_unlock(&lcdb->lcdb_mutex);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_ldo_regulator_disable(struct regulator_dev *rdev)
|
||
{
|
||
int rc = 0;
|
||
struct qpnp_lcdb *lcdb = rdev_get_drvdata(rdev);
|
||
|
||
if (lcdb->secure_mode)
|
||
return 0;
|
||
|
||
mutex_lock(&lcdb->lcdb_mutex);
|
||
rc = qpnp_lcdb_disable(lcdb);
|
||
if (rc < 0)
|
||
pr_err("Failed to disable lcdb rc=%d\n", rc);
|
||
mutex_unlock(&lcdb->lcdb_mutex);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_ldo_regulator_is_enabled(struct regulator_dev *rdev)
|
||
{
|
||
struct qpnp_lcdb *lcdb = rdev_get_drvdata(rdev);
|
||
|
||
return lcdb->lcdb_enabled;
|
||
}
|
||
|
||
static int qpnp_lcdb_ldo_regulator_set_voltage(struct regulator_dev *rdev,
|
||
int min_uV, int max_uV, unsigned int *selector)
|
||
{
|
||
int rc = 0;
|
||
struct qpnp_lcdb *lcdb = rdev_get_drvdata(rdev);
|
||
|
||
if (lcdb->secure_mode)
|
||
return 0;
|
||
|
||
lcdb->ldo.voltage_mv = min_uV / 1000;
|
||
if (lcdb->voltage_step_ramp)
|
||
rc = qpnp_lcdb_set_voltage_step(lcdb,
|
||
lcdb->ldo.prev_voltage_mv + VOLTAGE_STEP_MV, LDO);
|
||
else
|
||
rc = qpnp_lcdb_set_voltage(lcdb, lcdb->ldo.voltage_mv, LDO);
|
||
|
||
if (rc < 0)
|
||
pr_err("Failed to set LDO voltage rc=%c\n", rc);
|
||
else
|
||
lcdb->ldo.prev_voltage_mv = lcdb->ldo.voltage_mv;
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_ldo_regulator_get_voltage(struct regulator_dev *rdev)
|
||
{
|
||
int rc = 0;
|
||
u32 voltage_mv = 0;
|
||
struct qpnp_lcdb *lcdb = rdev_get_drvdata(rdev);
|
||
|
||
rc = qpnp_lcdb_get_voltage(lcdb, &voltage_mv, LDO);
|
||
if (rc < 0) {
|
||
pr_err("Failed to get ldo voltage rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
return voltage_mv * 1000;
|
||
}
|
||
|
||
static struct regulator_ops qpnp_lcdb_ldo_ops = {
|
||
.enable = qpnp_lcdb_ldo_regulator_enable,
|
||
.disable = qpnp_lcdb_ldo_regulator_disable,
|
||
.is_enabled = qpnp_lcdb_ldo_regulator_is_enabled,
|
||
.set_voltage = qpnp_lcdb_ldo_regulator_set_voltage,
|
||
.get_voltage = qpnp_lcdb_ldo_regulator_get_voltage,
|
||
};
|
||
|
||
static int qpnp_lcdb_ncp_regulator_enable(struct regulator_dev *rdev)
|
||
{
|
||
int rc = 0;
|
||
struct qpnp_lcdb *lcdb = rdev_get_drvdata(rdev);
|
||
|
||
if (lcdb->secure_mode)
|
||
return 0;
|
||
|
||
mutex_lock(&lcdb->lcdb_mutex);
|
||
rc = qpnp_lcdb_enable(lcdb);
|
||
if (rc < 0)
|
||
pr_err("Failed to enable lcdb rc=%d\n", rc);
|
||
mutex_unlock(&lcdb->lcdb_mutex);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_ncp_regulator_disable(struct regulator_dev *rdev)
|
||
{
|
||
int rc = 0;
|
||
struct qpnp_lcdb *lcdb = rdev_get_drvdata(rdev);
|
||
|
||
if (lcdb->secure_mode)
|
||
return 0;
|
||
|
||
mutex_lock(&lcdb->lcdb_mutex);
|
||
rc = qpnp_lcdb_disable(lcdb);
|
||
if (rc < 0)
|
||
pr_err("Failed to disable lcdb rc=%d\n", rc);
|
||
mutex_unlock(&lcdb->lcdb_mutex);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_ncp_regulator_is_enabled(struct regulator_dev *rdev)
|
||
{
|
||
struct qpnp_lcdb *lcdb = rdev_get_drvdata(rdev);
|
||
|
||
return lcdb->lcdb_enabled;
|
||
}
|
||
|
||
static int qpnp_lcdb_ncp_regulator_set_voltage(struct regulator_dev *rdev,
|
||
int min_uV, int max_uV, unsigned int *selector)
|
||
{
|
||
int rc = 0;
|
||
struct qpnp_lcdb *lcdb = rdev_get_drvdata(rdev);
|
||
|
||
if (lcdb->secure_mode)
|
||
return 0;
|
||
|
||
lcdb->ncp.voltage_mv = min_uV / 1000;
|
||
if (lcdb->voltage_step_ramp)
|
||
rc = qpnp_lcdb_set_voltage_step(lcdb,
|
||
lcdb->ncp.prev_voltage_mv + VOLTAGE_STEP_MV, NCP);
|
||
else
|
||
rc = qpnp_lcdb_set_voltage(lcdb, lcdb->ncp.voltage_mv, NCP);
|
||
|
||
if (rc < 0)
|
||
pr_err("Failed to set NCP voltage rc=%c\n", rc);
|
||
else
|
||
lcdb->ncp.prev_voltage_mv = lcdb->ncp.voltage_mv;
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_ncp_regulator_get_voltage(struct regulator_dev *rdev)
|
||
{
|
||
int rc;
|
||
u32 voltage_mv = 0;
|
||
struct qpnp_lcdb *lcdb = rdev_get_drvdata(rdev);
|
||
|
||
rc = qpnp_lcdb_get_voltage(lcdb, &voltage_mv, NCP);
|
||
if (rc < 0) {
|
||
pr_err("Failed to get ncp voltage rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
return voltage_mv * 1000;
|
||
}
|
||
|
||
static struct regulator_ops qpnp_lcdb_ncp_ops = {
|
||
.enable = qpnp_lcdb_ncp_regulator_enable,
|
||
.disable = qpnp_lcdb_ncp_regulator_disable,
|
||
.is_enabled = qpnp_lcdb_ncp_regulator_is_enabled,
|
||
.set_voltage = qpnp_lcdb_ncp_regulator_set_voltage,
|
||
.get_voltage = qpnp_lcdb_ncp_regulator_get_voltage,
|
||
};
|
||
|
||
static int qpnp_lcdb_regulator_register(struct qpnp_lcdb *lcdb, u8 type)
|
||
{
|
||
int rc = 0, off_on_delay = 0;
|
||
struct regulator_init_data *init_data;
|
||
struct regulator_config cfg = {};
|
||
struct regulator_desc *rdesc;
|
||
struct regulator_dev *rdev;
|
||
struct device_node *node;
|
||
|
||
if (lcdb->pmic_rev_id->pmic_subtype != PM660L_SUBTYPE)
|
||
off_on_delay = PMIC5_LCDB_OFF_ON_DELAY_US;
|
||
|
||
if (type == LDO) {
|
||
node = lcdb->ldo.node;
|
||
rdesc = &lcdb->ldo.rdesc;
|
||
rdesc->ops = &qpnp_lcdb_ldo_ops;
|
||
rdesc->off_on_delay = off_on_delay;
|
||
rdev = lcdb->ldo.rdev;
|
||
} else if (type == NCP) {
|
||
node = lcdb->ncp.node;
|
||
rdesc = &lcdb->ncp.rdesc;
|
||
rdesc->ops = &qpnp_lcdb_ncp_ops;
|
||
rdesc->off_on_delay = off_on_delay;
|
||
rdev = lcdb->ncp.rdev;
|
||
} else {
|
||
pr_err("Invalid regulator type %d\n", type);
|
||
return -EINVAL;
|
||
}
|
||
|
||
init_data = of_get_regulator_init_data(lcdb->dev, node, rdesc);
|
||
if (!init_data) {
|
||
pr_err("Failed to get regulator_init_data for %s\n",
|
||
(type == LDO) ? "LDO" : "NCP");
|
||
return -ENOMEM;
|
||
}
|
||
|
||
if (init_data->constraints.name) {
|
||
rdesc->owner = THIS_MODULE;
|
||
rdesc->type = REGULATOR_VOLTAGE;
|
||
rdesc->name = init_data->constraints.name;
|
||
|
||
cfg.dev = lcdb->dev;
|
||
cfg.init_data = init_data;
|
||
cfg.driver_data = lcdb;
|
||
cfg.of_node = node;
|
||
|
||
if (of_get_property(lcdb->dev->of_node, "parent-supply", NULL))
|
||
init_data->supply_regulator = "parent";
|
||
|
||
init_data->constraints.valid_ops_mask
|
||
|= REGULATOR_CHANGE_VOLTAGE
|
||
| REGULATOR_CHANGE_STATUS;
|
||
|
||
rdev = devm_regulator_register(lcdb->dev, rdesc, &cfg);
|
||
if (IS_ERR(rdev)) {
|
||
rc = PTR_ERR(rdev);
|
||
rdev = NULL;
|
||
pr_err("Failed to register lcdb_%s regulator rc = %d\n",
|
||
(type == LDO) ? "LDO" : "NCP", rc);
|
||
return rc;
|
||
}
|
||
} else {
|
||
pr_err("%s_regulator name missing\n",
|
||
(type == LDO) ? "LDO" : "NCP");
|
||
return -EINVAL;
|
||
}
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_parse_ttw(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0;
|
||
u32 temp;
|
||
u8 val = 0;
|
||
struct device_node *node = lcdb->dev->of_node;
|
||
|
||
if (of_property_read_bool(node, "qcom,ttw-mode-sw")) {
|
||
lcdb->ttw_mode_sw = true;
|
||
rc = of_property_read_u32(node, "qcom,attw-toff-ms", &temp);
|
||
if (!rc) {
|
||
if (!is_between(temp, ATTW_MIN_MS, ATTW_MAX_MS)) {
|
||
pr_err("Invalid TOFF val %d (min=%d max=%d)\n",
|
||
temp, ATTW_MIN_MS, ATTW_MAX_MS);
|
||
return -EINVAL;
|
||
}
|
||
val = ilog2(temp / 4) << ATTW_TOFF_TIME_SHIFT;
|
||
} else {
|
||
pr_err("qcom,attw-toff-ms not specified for TTW SW mode\n");
|
||
return rc;
|
||
}
|
||
|
||
rc = of_property_read_u32(node, "qcom,attw-ton-ms", &temp);
|
||
if (!rc) {
|
||
if (!is_between(temp, ATTW_MIN_MS, ATTW_MAX_MS)) {
|
||
pr_err("Invalid TON value %d (min=%d max=%d)\n",
|
||
temp, ATTW_MIN_MS, ATTW_MAX_MS);
|
||
return -EINVAL;
|
||
}
|
||
val |= ilog2(temp / 4);
|
||
} else {
|
||
pr_err("qcom,attw-ton-ms not specified for TTW SW mode\n");
|
||
return rc;
|
||
}
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_AUTO_TOUCH_WAKE_CTL_REG,
|
||
ATTW_TON_TIME_MASK | ATTW_TOFF_TIME_MASK, val);
|
||
if (rc < 0) {
|
||
pr_err("Failed to write ATTW ON/OFF rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int qpnp_lcdb_ldo_dt_init(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0;
|
||
struct device_node *node = lcdb->ldo.node;
|
||
|
||
/* LDO output voltage */
|
||
lcdb->ldo.voltage_mv = -EINVAL;
|
||
rc = of_property_read_u32(node, "qcom,ldo-voltage-mv",
|
||
&lcdb->ldo.voltage_mv);
|
||
if (!rc && !is_between(lcdb->ldo.voltage_mv, MIN_VOLTAGE_MV,
|
||
MAX_VOLTAGE_MV)) {
|
||
pr_err("Invalid LDO voltage %dmv (min=%d max=%d)\n",
|
||
lcdb->ldo.voltage_mv, MIN_VOLTAGE_MV, MAX_VOLTAGE_MV);
|
||
return -EINVAL;
|
||
}
|
||
|
||
/* LDO PD configuration */
|
||
lcdb->ldo.pd = -EINVAL;
|
||
of_property_read_u32(node, "qcom,ldo-pd", &lcdb->ldo.pd);
|
||
|
||
lcdb->ldo.pd_strength = -EINVAL;
|
||
of_property_read_u32(node, "qcom,ldo-pd-strength",
|
||
&lcdb->ldo.pd_strength);
|
||
|
||
/* LDO ILIM configuration */
|
||
lcdb->ldo.ilim_ma = -EINVAL;
|
||
rc = of_property_read_u32(node, "qcom,ldo-ilim-ma", &lcdb->ldo.ilim_ma);
|
||
if (!rc && !is_between(lcdb->ldo.ilim_ma, MIN_LDO_ILIM_MA,
|
||
MAX_LDO_ILIM_MA)) {
|
||
pr_err("Invalid ilim_ma %d (min=%d, max=%d)\n",
|
||
lcdb->ldo.ilim_ma, MIN_LDO_ILIM_MA,
|
||
MAX_LDO_ILIM_MA);
|
||
return -EINVAL;
|
||
}
|
||
|
||
/* LDO soft-start (SS) configuration */
|
||
lcdb->ldo.soft_start_us = -EINVAL;
|
||
of_property_read_u32(node, "qcom,ldo-soft-start-us",
|
||
&lcdb->ldo.soft_start_us);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int qpnp_lcdb_ncp_dt_init(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0;
|
||
struct device_node *node = lcdb->ncp.node;
|
||
|
||
/* NCP output voltage */
|
||
lcdb->ncp.voltage_mv = -EINVAL;
|
||
rc = of_property_read_u32(node, "qcom,ncp-voltage-mv",
|
||
&lcdb->ncp.voltage_mv);
|
||
if (!rc && !is_between(lcdb->ncp.voltage_mv, MIN_VOLTAGE_MV,
|
||
MAX_VOLTAGE_MV)) {
|
||
pr_err("Invalid NCP voltage %dmv (min=%d max=%d)\n",
|
||
lcdb->ldo.voltage_mv, MIN_VOLTAGE_MV, MAX_VOLTAGE_MV);
|
||
return -EINVAL;
|
||
}
|
||
|
||
/* NCP PD configuration */
|
||
lcdb->ncp.pd = -EINVAL;
|
||
of_property_read_u32(node, "qcom,ncp-pd", &lcdb->ncp.pd);
|
||
|
||
lcdb->ncp.pd_strength = -EINVAL;
|
||
of_property_read_u32(node, "qcom,ncp-pd-strength",
|
||
&lcdb->ncp.pd_strength);
|
||
|
||
/* NCP ILIM configuration */
|
||
lcdb->ncp.ilim_ma = -EINVAL;
|
||
rc = of_property_read_u32(node, "qcom,ncp-ilim-ma", &lcdb->ncp.ilim_ma);
|
||
if (!rc && !is_between(lcdb->ncp.ilim_ma, MIN_NCP_ILIM_MA,
|
||
MAX_NCP_ILIM_MA)) {
|
||
pr_err("Invalid ilim_ma %d (min=%d, max=%d)\n",
|
||
lcdb->ncp.ilim_ma, MIN_NCP_ILIM_MA, MAX_NCP_ILIM_MA);
|
||
return -EINVAL;
|
||
}
|
||
|
||
/* NCP soft-start (SS) configuration */
|
||
lcdb->ncp.soft_start_us = -EINVAL;
|
||
of_property_read_u32(node, "qcom,ncp-soft-start-us",
|
||
&lcdb->ncp.soft_start_us);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int qpnp_lcdb_bst_dt_init(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0;
|
||
struct device_node *node = lcdb->bst.node;
|
||
u16 pmic_subtype = lcdb->pmic_rev_id->pmic_subtype;
|
||
u16 default_headroom_mv;
|
||
|
||
/* Boost PD configuration */
|
||
lcdb->bst.pd = -EINVAL;
|
||
of_property_read_u32(node, "qcom,bst-pd", &lcdb->bst.pd);
|
||
|
||
lcdb->bst.pd_strength = -EINVAL;
|
||
of_property_read_u32(node, "qcom,bst-pd-strength",
|
||
&lcdb->bst.pd_strength);
|
||
|
||
/* Boost ILIM */
|
||
lcdb->bst.ilim_ma = -EINVAL;
|
||
rc = of_property_read_u32(node, "qcom,bst-ilim-ma", &lcdb->bst.ilim_ma);
|
||
if (!rc && !is_between(lcdb->bst.ilim_ma, MIN_BST_ILIM_MA,
|
||
MAX_BST_ILIM_MA)) {
|
||
pr_err("Invalid ilim_ma %d (min=%d, max=%d)\n",
|
||
lcdb->bst.ilim_ma, MIN_BST_ILIM_MA, MAX_BST_ILIM_MA);
|
||
return -EINVAL;
|
||
}
|
||
|
||
/* Boost PS configuration */
|
||
lcdb->bst.ps = -EINVAL;
|
||
of_property_read_u32(node, "qcom,bst-ps", &lcdb->bst.ps);
|
||
|
||
lcdb->bst.ps_threshold = -EINVAL;
|
||
rc = of_property_read_u32(node, "qcom,bst-ps-threshold-ma",
|
||
&lcdb->bst.ps_threshold);
|
||
if (!rc && !is_between(lcdb->bst.ps_threshold,
|
||
MIN_BST_PS_MA, MAX_BST_PS_MA)) {
|
||
pr_err("Invalid bst ps_threshold %d (min=%d, max=%d)\n",
|
||
lcdb->bst.ps_threshold, MIN_BST_PS_MA, MAX_BST_PS_MA);
|
||
return -EINVAL;
|
||
}
|
||
|
||
default_headroom_mv = (pmic_subtype == PM660L_SUBTYPE) ?
|
||
PM660_BST_HEADROOM_DEFAULT_MV :
|
||
BST_HEADROOM_DEFAULT_MV;
|
||
/* Boost head room configuration */
|
||
of_property_read_u16(node, "qcom,bst-headroom-mv",
|
||
&lcdb->bst.headroom_mv);
|
||
if (lcdb->bst.headroom_mv < default_headroom_mv)
|
||
lcdb->bst.headroom_mv = default_headroom_mv;
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int qpnp_lcdb_init_ldo(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0, ilim_ma;
|
||
u8 val = 0;
|
||
|
||
/* configure parameters only if LCDB is disabled */
|
||
if (!is_lcdb_enabled(lcdb)) {
|
||
if (lcdb->ldo.voltage_mv != -EINVAL) {
|
||
rc = qpnp_lcdb_set_voltage(lcdb,
|
||
lcdb->ldo.voltage_mv, LDO);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set voltage rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (lcdb->ldo.pd != -EINVAL) {
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_LDO_PD_CTL_REG, LDO_DIS_PULLDOWN_BIT,
|
||
lcdb->ldo.pd ? 0 : LDO_DIS_PULLDOWN_BIT);
|
||
if (rc < 0) {
|
||
pr_err("Failed to configure LDO PD rc=%d\n",
|
||
rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (lcdb->ldo.pd_strength != -EINVAL) {
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_LDO_PD_CTL_REG, LDO_PD_STRENGTH_BIT,
|
||
lcdb->ldo.pd_strength ?
|
||
LDO_PD_STRENGTH_BIT : 0);
|
||
if (rc < 0) {
|
||
pr_err("Failed to configure LDO PD strength %s rc=%d\n",
|
||
lcdb->ldo.pd_strength ?
|
||
"(strong)" : "(weak)", rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (lcdb->ldo.ilim_ma != -EINVAL) {
|
||
ilim_ma = lcdb->ldo.ilim_ma - MIN_LDO_ILIM_MA;
|
||
ilim_ma /= LDO_ILIM_STEP_MA;
|
||
val = (ilim_ma & SET_LDO_ILIM_MASK) | EN_LDO_ILIM_BIT;
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_LDO_ILIM_CTL1_REG,
|
||
SET_LDO_ILIM_MASK | EN_LDO_ILIM_BIT,
|
||
val);
|
||
if (rc < 0) {
|
||
pr_err("Failed to configure LDO ilim_ma (CTL1=%d) rc=%d\n",
|
||
val, rc);
|
||
return rc;
|
||
}
|
||
|
||
val = ilim_ma & SET_LDO_ILIM_MASK;
|
||
rc = qpnp_lcdb_masked_write(lcdb,
|
||
lcdb->base + LCDB_LDO_ILIM_CTL2_REG,
|
||
SET_LDO_ILIM_MASK, val);
|
||
if (rc < 0) {
|
||
pr_err("Failed to configure LDO ilim_ma (CTL2=%d) rc=%d\n",
|
||
val, rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (lcdb->ldo.soft_start_us != -EINVAL) {
|
||
rc = qpnp_lcdb_set_soft_start(lcdb,
|
||
lcdb->ldo.soft_start_us, LDO);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set LDO soft_start rc=%d\n",
|
||
rc);
|
||
return rc;
|
||
}
|
||
}
|
||
}
|
||
|
||
rc = qpnp_lcdb_get_voltage(lcdb, &lcdb->ldo.voltage_mv, LDO);
|
||
if (rc < 0) {
|
||
pr_err("Failed to get LDO volatge rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
lcdb->ldo.prev_voltage_mv = lcdb->ldo.voltage_mv;
|
||
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base +
|
||
LCDB_LDO_VREG_OK_CTL_REG, &val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to read ldo_vreg_ok rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
lcdb->ldo.vreg_ok_dbc_us = dbc_us[val & VREG_OK_DEB_MASK];
|
||
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base +
|
||
LCDB_LDO_SOFT_START_CTL_REG, &val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to read ldo_soft_start_ctl rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
lcdb->ldo.soft_start_us = soft_start_us[val & SOFT_START_MASK];
|
||
|
||
rc = qpnp_lcdb_regulator_register(lcdb, LDO);
|
||
if (rc < 0)
|
||
pr_err("Failed to register ldo rc=%d\n", rc);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_init_ncp(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0, i = 0;
|
||
u8 val = 0;
|
||
|
||
/* configure parameters only if LCDB is disabled */
|
||
if (!is_lcdb_enabled(lcdb)) {
|
||
if (lcdb->ncp.voltage_mv != -EINVAL) {
|
||
rc = qpnp_lcdb_set_voltage(lcdb,
|
||
lcdb->ncp.voltage_mv, NCP);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set voltage rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (lcdb->ncp.pd != -EINVAL) {
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_NCP_PD_CTL_REG, NCP_DIS_PULLDOWN_BIT,
|
||
lcdb->ncp.pd ? 0 : NCP_DIS_PULLDOWN_BIT);
|
||
if (rc < 0) {
|
||
pr_err("Failed to configure NCP PD rc=%d\n",
|
||
rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (lcdb->ncp.pd_strength != -EINVAL) {
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_NCP_PD_CTL_REG, NCP_PD_STRENGTH_BIT,
|
||
lcdb->ncp.pd_strength ?
|
||
NCP_PD_STRENGTH_BIT : 0);
|
||
if (rc < 0) {
|
||
pr_err("Failed to configure NCP PD strength %s rc=%d\n",
|
||
lcdb->ncp.pd_strength ?
|
||
"(strong)" : "(weak)", rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (lcdb->ncp.ilim_ma != -EINVAL) {
|
||
while (lcdb->ncp.ilim_ma > ncp_ilim_ma[i])
|
||
i++;
|
||
val = (i == 0) ? 0 : i - 1;
|
||
val = (lcdb->ncp.ilim_ma & SET_NCP_ILIM_MASK) |
|
||
EN_NCP_ILIM_BIT;
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_NCP_ILIM_CTL1_REG,
|
||
SET_NCP_ILIM_MASK | EN_NCP_ILIM_BIT, val);
|
||
if (rc < 0) {
|
||
pr_err("Failed to configure NCP ilim_ma (CTL1=%d) rc=%d\n",
|
||
val, rc);
|
||
return rc;
|
||
}
|
||
val = lcdb->ncp.ilim_ma & SET_NCP_ILIM_MASK;
|
||
rc = qpnp_lcdb_masked_write(lcdb,
|
||
lcdb->base + LCDB_NCP_ILIM_CTL2_REG,
|
||
SET_NCP_ILIM_MASK, val);
|
||
if (rc < 0) {
|
||
pr_err("Failed to configure NCP ilim_ma (CTL2=%d) rc=%d\n",
|
||
val, rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (lcdb->ncp.soft_start_us != -EINVAL) {
|
||
rc = qpnp_lcdb_set_soft_start(lcdb,
|
||
lcdb->ncp.soft_start_us, NCP);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set NCP soft_start rc=%d\n",
|
||
rc);
|
||
return rc;
|
||
}
|
||
}
|
||
}
|
||
|
||
rc = qpnp_lcdb_get_voltage(lcdb, &lcdb->ncp.voltage_mv, NCP);
|
||
if (rc < 0) {
|
||
pr_err("Failed to get NCP volatge rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
lcdb->ncp.prev_voltage_mv = lcdb->ncp.voltage_mv;
|
||
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base +
|
||
LCDB_NCP_VREG_OK_CTL_REG, &val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to read ncp_vreg_ok rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
lcdb->ncp.vreg_ok_dbc_us = dbc_us[val & VREG_OK_DEB_MASK];
|
||
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base +
|
||
LCDB_NCP_SOFT_START_CTL_REG, &val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to read ncp_soft_start_ctl rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
lcdb->ncp.soft_start_us = soft_start_us[val & SOFT_START_MASK];
|
||
|
||
rc = qpnp_lcdb_regulator_register(lcdb, NCP);
|
||
if (rc < 0)
|
||
pr_err("Failed to register NCP rc=%d\n", rc);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_init_bst(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0;
|
||
u8 val, mask = 0;
|
||
u16 pmic_subtype = lcdb->pmic_rev_id->pmic_subtype;
|
||
|
||
/* configure parameters only if LCDB is disabled */
|
||
if (!is_lcdb_enabled(lcdb)) {
|
||
if (lcdb->bst.pd != -EINVAL) {
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_BST_PD_CTL_REG, BOOST_DIS_PULLDOWN_BIT,
|
||
lcdb->bst.pd ? 0 : BOOST_DIS_PULLDOWN_BIT);
|
||
if (rc < 0) {
|
||
pr_err("Failed to configure BST PD rc=%d\n",
|
||
rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (lcdb->bst.pd_strength != -EINVAL) {
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_BST_PD_CTL_REG, BOOST_PD_STRENGTH_BIT,
|
||
lcdb->bst.pd_strength ?
|
||
BOOST_PD_STRENGTH_BIT : 0);
|
||
if (rc < 0) {
|
||
pr_err("Failed to configure NCP PD strength %s rc=%d\n",
|
||
lcdb->bst.pd_strength ?
|
||
"(strong)" : "(weak)", rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (lcdb->bst.ilim_ma != -EINVAL) {
|
||
val = (lcdb->bst.ilim_ma / MIN_BST_ILIM_MA) - 1;
|
||
val = (lcdb->bst.ilim_ma & SET_BST_ILIM_MASK) |
|
||
EN_BST_ILIM_BIT;
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_BST_ILIM_CTL_REG,
|
||
SET_BST_ILIM_MASK | EN_BST_ILIM_BIT, val);
|
||
if (rc < 0) {
|
||
pr_err("Failed to configure BST ilim_ma rc=%d\n",
|
||
rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (lcdb->bst.ps != -EINVAL) {
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_PS_CTL_REG, EN_PS_BIT,
|
||
lcdb->bst.ps ? EN_PS_BIT : 0);
|
||
if (rc < 0) {
|
||
pr_err("Failed to disable BST PS rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (lcdb->bst.ps_threshold != -EINVAL) {
|
||
mask = (pmic_subtype == PM660L_SUBTYPE) ?
|
||
PM660_PS_THRESH_MASK : PS_THRESH_MASK;
|
||
val = (lcdb->bst.ps_threshold - MIN_BST_PS_MA) / 10;
|
||
val = (lcdb->bst.ps_threshold & mask) | EN_PS_BIT;
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_PS_CTL_REG,
|
||
mask | EN_PS_BIT, val);
|
||
if (rc < 0) {
|
||
pr_err("Failed to configure BST PS threshold rc=%d\n",
|
||
rc);
|
||
return rc;
|
||
}
|
||
}
|
||
}
|
||
|
||
rc = qpnp_lcdb_get_voltage(lcdb, &lcdb->bst.voltage_mv, BST);
|
||
if (rc < 0) {
|
||
pr_err("Failed to get BST volatge rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base +
|
||
LCDB_BST_VREG_OK_CTL_REG, &val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to read bst_vreg_ok rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
lcdb->bst.vreg_ok_dbc_us = dbc_us[val & VREG_OK_DEB_MASK];
|
||
|
||
if (pmic_subtype == PM660L_SUBTYPE) {
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base +
|
||
LCDB_SOFT_START_CTL_REG, &val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to read lcdb_soft_start_ctl rc=%d\n",
|
||
rc);
|
||
return rc;
|
||
}
|
||
lcdb->bst.soft_start_us = (val & SOFT_START_MASK) * 200 + 200;
|
||
if (!lcdb->bst.headroom_mv)
|
||
lcdb->bst.headroom_mv = PM660_BST_HEADROOM_DEFAULT_MV;
|
||
} else {
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base +
|
||
LCDB_BST_SS_CTL_REG, &val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to read bst_soft_start_ctl rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
lcdb->bst.soft_start_us = soft_start_us[val & SOFT_START_MASK];
|
||
if (!lcdb->bst.headroom_mv)
|
||
lcdb->bst.headroom_mv = BST_HEADROOM_DEFAULT_MV;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static void qpnp_lcdb_pmic_config(struct qpnp_lcdb *lcdb)
|
||
{
|
||
switch (lcdb->pmic_rev_id->pmic_subtype) {
|
||
case PM660L_SUBTYPE:
|
||
if (lcdb->pmic_rev_id->rev4 < PM660L_V2P0_REV4)
|
||
lcdb->wa_flags |= NCP_SCP_DISABLE_WA;
|
||
break;
|
||
case PMI632_SUBTYPE:
|
||
case PM6150L_SUBTYPE:
|
||
lcdb->wa_flags |= FORCE_PD_ENABLE_WA;
|
||
break;
|
||
default:
|
||
break;
|
||
}
|
||
|
||
pr_debug("LCDB wa_flags = 0x%2x\n", lcdb->wa_flags);
|
||
}
|
||
|
||
static int qpnp_lcdb_hw_init(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0;
|
||
u8 val = 0;
|
||
|
||
qpnp_lcdb_pmic_config(lcdb);
|
||
|
||
if (lcdb->pwrdn_delay_ms != -EINVAL) {
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_PWRUP_PWRDN_CTL_REG,
|
||
PWRDN_DELAY_MASK,
|
||
lcdb->pwrdn_delay_ms);
|
||
if (rc < 0)
|
||
return rc;
|
||
}
|
||
|
||
rc = qpnp_lcdb_init_bst(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to initialize BOOST rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
rc = qpnp_lcdb_init_ldo(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to initialize LDO rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
rc = qpnp_lcdb_init_ncp(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to initialize NCP rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
if (lcdb->sc_irq >= 0 && !(lcdb->wa_flags & NCP_SCP_DISABLE_WA)) {
|
||
lcdb->sc_count = 0;
|
||
irq_set_status_flags(lcdb->sc_irq,
|
||
IRQ_DISABLE_UNLAZY);
|
||
rc = devm_request_threaded_irq(lcdb->dev, lcdb->sc_irq,
|
||
NULL, qpnp_lcdb_sc_irq_handler, IRQF_ONESHOT,
|
||
"qpnp_lcdb_sc_irq", lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Unable to request sc(%d) irq rc=%d\n",
|
||
lcdb->sc_irq, rc);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (!is_lcdb_enabled(lcdb)) {
|
||
rc = qpnp_lcdb_read(lcdb, lcdb->base +
|
||
LCDB_MODULE_RDY_REG, &val, 1);
|
||
if (rc < 0) {
|
||
pr_err("Failed to read MODULE_RDY rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
if (!(val & MODULE_RDY_BIT)) {
|
||
rc = qpnp_lcdb_masked_write(lcdb, lcdb->base +
|
||
LCDB_MODULE_RDY_REG, MODULE_RDY_BIT,
|
||
MODULE_RDY_BIT);
|
||
if (rc < 0) {
|
||
pr_err("Failed to set MODULE RDY rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
}
|
||
} else {
|
||
/* module already enabled */
|
||
lcdb->lcdb_enabled = true;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int qpnp_lcdb_parse_dt(struct qpnp_lcdb *lcdb)
|
||
{
|
||
int rc = 0, i = 0;
|
||
u32 tmp;
|
||
const char *label;
|
||
struct device_node *revid_dev_node, *temp, *node = lcdb->dev->of_node;
|
||
|
||
revid_dev_node = of_parse_phandle(node, "qcom,pmic-revid", 0);
|
||
if (!revid_dev_node) {
|
||
pr_err("Missing qcom,pmic-revid property - fail driver\n");
|
||
return -EINVAL;
|
||
}
|
||
|
||
lcdb->pmic_rev_id = get_revid_data(revid_dev_node);
|
||
if (IS_ERR(lcdb->pmic_rev_id)) {
|
||
pr_debug("Unable to get revid data\n");
|
||
/*
|
||
* revid should to be defined, return -EPROBE_DEFER
|
||
* until the revid module registers.
|
||
*/
|
||
of_node_put(revid_dev_node);
|
||
return -EPROBE_DEFER;
|
||
}
|
||
|
||
of_node_put(revid_dev_node);
|
||
for_each_available_child_of_node(node, temp) {
|
||
rc = of_property_read_string(temp, "label", &label);
|
||
if (rc < 0) {
|
||
pr_err("Failed to read label rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
if (!strcmp(label, "ldo")) {
|
||
lcdb->ldo.node = temp;
|
||
rc = qpnp_lcdb_ldo_dt_init(lcdb);
|
||
} else if (!strcmp(label, "ncp")) {
|
||
lcdb->ncp.node = temp;
|
||
rc = qpnp_lcdb_ncp_dt_init(lcdb);
|
||
} else if (!strcmp(label, "bst")) {
|
||
lcdb->bst.node = temp;
|
||
rc = qpnp_lcdb_bst_dt_init(lcdb);
|
||
} else {
|
||
pr_err("Failed to identify label %s\n", label);
|
||
return -EINVAL;
|
||
}
|
||
if (rc < 0) {
|
||
pr_err("Failed to register %s module\n", label);
|
||
return rc;
|
||
}
|
||
}
|
||
|
||
if (of_property_read_bool(node, "qcom,ttw-enable")) {
|
||
rc = qpnp_lcdb_parse_ttw(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to parse ttw-params rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
lcdb->ttw_enable = true;
|
||
}
|
||
|
||
lcdb->sc_irq = platform_get_irq_byname(lcdb->pdev, "sc-irq");
|
||
if (lcdb->sc_irq < 0)
|
||
pr_debug("sc irq is not defined\n");
|
||
|
||
lcdb->voltage_step_ramp =
|
||
of_property_read_bool(node, "qcom,voltage-step-ramp");
|
||
|
||
lcdb->pwrdn_delay_ms = -EINVAL;
|
||
rc = of_property_read_u32(node, "qcom,pwrdn-delay-ms", &tmp);
|
||
if (!rc) {
|
||
if (!is_between(tmp, PWRDN_DELAY_MIN_MS, PWRDN_DELAY_MAX_MS)) {
|
||
pr_err("Invalid PWRDN_DLY val %d (min=%d max=%d)\n",
|
||
tmp, PWRDN_DELAY_MIN_MS, PWRDN_DELAY_MAX_MS);
|
||
return -EINVAL;
|
||
}
|
||
|
||
for (i = 0; i < ARRAY_SIZE(pwrup_pwrdn_ms); i++) {
|
||
if (tmp == pwrup_pwrdn_ms[i]) {
|
||
lcdb->pwrdn_delay_ms = i;
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static ssize_t secure_mode_store(struct class *c,
|
||
struct class_attribute *attr,
|
||
const char *buf, size_t count)
|
||
{
|
||
struct qpnp_lcdb *lcdb = container_of(c, struct qpnp_lcdb,
|
||
lcdb_class);
|
||
int val, rc;
|
||
|
||
rc = kstrtouint(buf, 0, &val);
|
||
|
||
if (rc < 0)
|
||
return rc;
|
||
|
||
if (val != 0 && val != 1)
|
||
return count;
|
||
|
||
if (val == 1 && !lcdb->secure_mode) {
|
||
if (lcdb->sc_irq > 0)
|
||
disable_irq(lcdb->sc_irq);
|
||
|
||
lcdb->secure_mode = true;
|
||
} else if (val == 0 && lcdb->secure_mode) {
|
||
|
||
if (lcdb->sc_irq > 0)
|
||
enable_irq(lcdb->sc_irq);
|
||
|
||
lcdb->secure_mode = false;
|
||
}
|
||
|
||
return count;
|
||
}
|
||
static CLASS_ATTR_WO(secure_mode);
|
||
|
||
static struct attribute *lcdb_attrs[] = {
|
||
&class_attr_secure_mode.attr,
|
||
NULL,
|
||
};
|
||
ATTRIBUTE_GROUPS(lcdb);
|
||
|
||
static int qpnp_lcdb_regulator_probe(struct platform_device *pdev)
|
||
{
|
||
int rc;
|
||
struct device_node *node;
|
||
struct qpnp_lcdb *lcdb;
|
||
|
||
node = pdev->dev.of_node;
|
||
if (!node) {
|
||
pr_err("No nodes defined\n");
|
||
return -ENODEV;
|
||
}
|
||
|
||
lcdb = devm_kzalloc(&pdev->dev, sizeof(*lcdb), GFP_KERNEL);
|
||
if (!lcdb)
|
||
return -ENOMEM;
|
||
|
||
rc = of_property_read_u32(node, "reg", &lcdb->base);
|
||
if (rc < 0) {
|
||
pr_err("Failed to find reg node rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
lcdb->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
||
if (!lcdb->regmap) {
|
||
pr_err("Failed to get the regmap handle rc=%d\n", rc);
|
||
return -EINVAL;
|
||
}
|
||
|
||
lcdb->dev = &pdev->dev;
|
||
lcdb->pdev = pdev;
|
||
mutex_init(&lcdb->lcdb_mutex);
|
||
mutex_init(&lcdb->read_write_mutex);
|
||
|
||
rc = qpnp_lcdb_parse_dt(lcdb);
|
||
if (rc < 0) {
|
||
pr_err("Failed to parse dt rc=%d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
lcdb->lcdb_class.name = "lcd_bias";
|
||
lcdb->lcdb_class.owner = THIS_MODULE;
|
||
lcdb->lcdb_class.class_groups = lcdb_groups;
|
||
|
||
rc = class_register(&lcdb->lcdb_class);
|
||
if (rc < 0) {
|
||
pr_err("Failed to register lcdb class rc = %d\n", rc);
|
||
return rc;
|
||
}
|
||
|
||
rc = qpnp_lcdb_hw_init(lcdb);
|
||
if (rc < 0)
|
||
pr_err("Failed to initialize LCDB module rc=%d\n", rc);
|
||
else
|
||
pr_info("LCDB module successfully registered! lcdb_en=%d ldo_voltage=%dmV ncp_voltage=%dmV bst_voltage=%dmV\n",
|
||
lcdb->lcdb_enabled, lcdb->ldo.voltage_mv,
|
||
lcdb->ncp.voltage_mv, lcdb->bst.voltage_mv);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int qpnp_lcdb_regulator_remove(struct platform_device *pdev)
|
||
{
|
||
struct qpnp_lcdb *lcdb = dev_get_drvdata(&pdev->dev);
|
||
|
||
mutex_destroy(&lcdb->lcdb_mutex);
|
||
mutex_destroy(&lcdb->read_write_mutex);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static const struct of_device_id lcdb_match_table[] = {
|
||
{ .compatible = QPNP_LCDB_REGULATOR_DRIVER_NAME, },
|
||
{ },
|
||
};
|
||
|
||
static struct platform_driver qpnp_lcdb_regulator_driver = {
|
||
.driver = {
|
||
.name = QPNP_LCDB_REGULATOR_DRIVER_NAME,
|
||
.of_match_table = lcdb_match_table,
|
||
},
|
||
.probe = qpnp_lcdb_regulator_probe,
|
||
.remove = qpnp_lcdb_regulator_remove,
|
||
};
|
||
|
||
static int __init qpnp_lcdb_regulator_init(void)
|
||
{
|
||
return platform_driver_register(&qpnp_lcdb_regulator_driver);
|
||
}
|
||
arch_initcall(qpnp_lcdb_regulator_init);
|
||
|
||
static void __exit qpnp_lcdb_regulator_exit(void)
|
||
{
|
||
platform_driver_unregister(&qpnp_lcdb_regulator_driver);
|
||
}
|
||
module_exit(qpnp_lcdb_regulator_exit);
|
||
|
||
MODULE_DESCRIPTION("QPNP LCDB regulator driver");
|
||
MODULE_LICENSE("GPL v2");
|