5b54814022
Convert magic values 1 and -1 to NETDEV_TX_BUSY and NETDEV_TX_LOCKED respectively. 0 (NETDEV_TX_OK) is not changed to keep the noise down, except in very few cases where its in direct proximity to one of the other values. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
5674 lines
165 KiB
C
5674 lines
165 KiB
C
/* de4x5.c: A DIGITAL DC21x4x DECchip and DE425/DE434/DE435/DE450/DE500
|
|
ethernet driver for Linux.
|
|
|
|
Copyright 1994, 1995 Digital Equipment Corporation.
|
|
|
|
Testing resources for this driver have been made available
|
|
in part by NASA Ames Research Center (mjacob@nas.nasa.gov).
|
|
|
|
The author may be reached at davies@maniac.ultranet.com.
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms of the GNU General Public License as published by the
|
|
Free Software Foundation; either version 2 of the License, or (at your
|
|
option) any later version.
|
|
|
|
THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
You should have received a copy of the GNU General Public License along
|
|
with this program; if not, write to the Free Software Foundation, Inc.,
|
|
675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
Originally, this driver was written for the Digital Equipment
|
|
Corporation series of EtherWORKS ethernet cards:
|
|
|
|
DE425 TP/COAX EISA
|
|
DE434 TP PCI
|
|
DE435 TP/COAX/AUI PCI
|
|
DE450 TP/COAX/AUI PCI
|
|
DE500 10/100 PCI Fasternet
|
|
|
|
but it will now attempt to support all cards which conform to the
|
|
Digital Semiconductor SROM Specification. The driver currently
|
|
recognises the following chips:
|
|
|
|
DC21040 (no SROM)
|
|
DC21041[A]
|
|
DC21140[A]
|
|
DC21142
|
|
DC21143
|
|
|
|
So far the driver is known to work with the following cards:
|
|
|
|
KINGSTON
|
|
Linksys
|
|
ZNYX342
|
|
SMC8432
|
|
SMC9332 (w/new SROM)
|
|
ZNYX31[45]
|
|
ZNYX346 10/100 4 port (can act as a 10/100 bridge!)
|
|
|
|
The driver has been tested on a relatively busy network using the DE425,
|
|
DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred
|
|
16M of data to a DECstation 5000/200 as follows:
|
|
|
|
TCP UDP
|
|
TX RX TX RX
|
|
DE425 1030k 997k 1170k 1128k
|
|
DE434 1063k 995k 1170k 1125k
|
|
DE435 1063k 995k 1170k 1125k
|
|
DE500 1063k 998k 1170k 1125k in 10Mb/s mode
|
|
|
|
All values are typical (in kBytes/sec) from a sample of 4 for each
|
|
measurement. Their error is +/-20k on a quiet (private) network and also
|
|
depend on what load the CPU has.
|
|
|
|
=========================================================================
|
|
This driver has been written substantially from scratch, although its
|
|
inheritance of style and stack interface from 'ewrk3.c' and in turn from
|
|
Donald Becker's 'lance.c' should be obvious. With the module autoload of
|
|
every usable DECchip board, I pinched Donald's 'next_module' field to
|
|
link my modules together.
|
|
|
|
Upto 15 EISA cards can be supported under this driver, limited primarily
|
|
by the available IRQ lines. I have checked different configurations of
|
|
multiple depca, EtherWORKS 3 cards and de4x5 cards and have not found a
|
|
problem yet (provided you have at least depca.c v0.38) ...
|
|
|
|
PCI support has been added to allow the driver to work with the DE434,
|
|
DE435, DE450 and DE500 cards. The I/O accesses are a bit of a kludge due
|
|
to the differences in the EISA and PCI CSR address offsets from the base
|
|
address.
|
|
|
|
The ability to load this driver as a loadable module has been included
|
|
and used extensively during the driver development (to save those long
|
|
reboot sequences). Loadable module support under PCI and EISA has been
|
|
achieved by letting the driver autoprobe as if it were compiled into the
|
|
kernel. Do make sure you're not sharing interrupts with anything that
|
|
cannot accommodate interrupt sharing!
|
|
|
|
To utilise this ability, you have to do 8 things:
|
|
|
|
0) have a copy of the loadable modules code installed on your system.
|
|
1) copy de4x5.c from the /linux/drivers/net directory to your favourite
|
|
temporary directory.
|
|
2) for fixed autoprobes (not recommended), edit the source code near
|
|
line 5594 to reflect the I/O address you're using, or assign these when
|
|
loading by:
|
|
|
|
insmod de4x5 io=0xghh where g = bus number
|
|
hh = device number
|
|
|
|
NB: autoprobing for modules is now supported by default. You may just
|
|
use:
|
|
|
|
insmod de4x5
|
|
|
|
to load all available boards. For a specific board, still use
|
|
the 'io=?' above.
|
|
3) compile de4x5.c, but include -DMODULE in the command line to ensure
|
|
that the correct bits are compiled (see end of source code).
|
|
4) if you are wanting to add a new card, goto 5. Otherwise, recompile a
|
|
kernel with the de4x5 configuration turned off and reboot.
|
|
5) insmod de4x5 [io=0xghh]
|
|
6) run the net startup bits for your new eth?? interface(s) manually
|
|
(usually /etc/rc.inet[12] at boot time).
|
|
7) enjoy!
|
|
|
|
To unload a module, turn off the associated interface(s)
|
|
'ifconfig eth?? down' then 'rmmod de4x5'.
|
|
|
|
Automedia detection is included so that in principal you can disconnect
|
|
from, e.g. TP, reconnect to BNC and things will still work (after a
|
|
pause whilst the driver figures out where its media went). My tests
|
|
using ping showed that it appears to work....
|
|
|
|
By default, the driver will now autodetect any DECchip based card.
|
|
Should you have a need to restrict the driver to DIGITAL only cards, you
|
|
can compile with a DEC_ONLY define, or if loading as a module, use the
|
|
'dec_only=1' parameter.
|
|
|
|
I've changed the timing routines to use the kernel timer and scheduling
|
|
functions so that the hangs and other assorted problems that occurred
|
|
while autosensing the media should be gone. A bonus for the DC21040
|
|
auto media sense algorithm is that it can now use one that is more in
|
|
line with the rest (the DC21040 chip doesn't have a hardware timer).
|
|
The downside is the 1 'jiffies' (10ms) resolution.
|
|
|
|
IEEE 802.3u MII interface code has been added in anticipation that some
|
|
products may use it in the future.
|
|
|
|
The SMC9332 card has a non-compliant SROM which needs fixing - I have
|
|
patched this driver to detect it because the SROM format used complies
|
|
to a previous DEC-STD format.
|
|
|
|
I have removed the buffer copies needed for receive on Intels. I cannot
|
|
remove them for Alphas since the Tulip hardware only does longword
|
|
aligned DMA transfers and the Alphas get alignment traps with non
|
|
longword aligned data copies (which makes them really slow). No comment.
|
|
|
|
I have added SROM decoding routines to make this driver work with any
|
|
card that supports the Digital Semiconductor SROM spec. This will help
|
|
all cards running the dc2114x series chips in particular. Cards using
|
|
the dc2104x chips should run correctly with the basic driver. I'm in
|
|
debt to <mjacob@feral.com> for the testing and feedback that helped get
|
|
this feature working. So far we have tested KINGSTON, SMC8432, SMC9332
|
|
(with the latest SROM complying with the SROM spec V3: their first was
|
|
broken), ZNYX342 and LinkSys. ZYNX314 (dual 21041 MAC) and ZNYX 315
|
|
(quad 21041 MAC) cards also appear to work despite their incorrectly
|
|
wired IRQs.
|
|
|
|
I have added a temporary fix for interrupt problems when some SCSI cards
|
|
share the same interrupt as the DECchip based cards. The problem occurs
|
|
because the SCSI card wants to grab the interrupt as a fast interrupt
|
|
(runs the service routine with interrupts turned off) vs. this card
|
|
which really needs to run the service routine with interrupts turned on.
|
|
This driver will now add the interrupt service routine as a fast
|
|
interrupt if it is bounced from the slow interrupt. THIS IS NOT A
|
|
RECOMMENDED WAY TO RUN THE DRIVER and has been done for a limited time
|
|
until people sort out their compatibility issues and the kernel
|
|
interrupt service code is fixed. YOU SHOULD SEPARATE OUT THE FAST
|
|
INTERRUPT CARDS FROM THE SLOW INTERRUPT CARDS to ensure that they do not
|
|
run on the same interrupt. PCMCIA/CardBus is another can of worms...
|
|
|
|
Finally, I think I have really fixed the module loading problem with
|
|
more than one DECchip based card. As a side effect, I don't mess with
|
|
the device structure any more which means that if more than 1 card in
|
|
2.0.x is installed (4 in 2.1.x), the user will have to edit
|
|
linux/drivers/net/Space.c to make room for them. Hence, module loading
|
|
is the preferred way to use this driver, since it doesn't have this
|
|
limitation.
|
|
|
|
Where SROM media detection is used and full duplex is specified in the
|
|
SROM, the feature is ignored unless lp->params.fdx is set at compile
|
|
time OR during a module load (insmod de4x5 args='eth??:fdx' [see
|
|
below]). This is because there is no way to automatically detect full
|
|
duplex links except through autonegotiation. When I include the
|
|
autonegotiation feature in the SROM autoconf code, this detection will
|
|
occur automatically for that case.
|
|
|
|
Command line arguments are now allowed, similar to passing arguments
|
|
through LILO. This will allow a per adapter board set up of full duplex
|
|
and media. The only lexical constraints are: the board name (dev->name)
|
|
appears in the list before its parameters. The list of parameters ends
|
|
either at the end of the parameter list or with another board name. The
|
|
following parameters are allowed:
|
|
|
|
fdx for full duplex
|
|
autosense to set the media/speed; with the following
|
|
sub-parameters:
|
|
TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO
|
|
|
|
Case sensitivity is important for the sub-parameters. They *must* be
|
|
upper case. Examples:
|
|
|
|
insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
|
|
|
|
For a compiled in driver, at or above line 548, place e.g.
|
|
#define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP"
|
|
|
|
Yes, I know full duplex isn't permissible on BNC or AUI; they're just
|
|
examples. By default, full duplex is turned off and AUTO is the default
|
|
autosense setting. In reality, I expect only the full duplex option to
|
|
be used. Note the use of single quotes in the two examples above and the
|
|
lack of commas to separate items. ALSO, you must get the requested media
|
|
correct in relation to what the adapter SROM says it has. There's no way
|
|
to determine this in advance other than by trial and error and common
|
|
sense, e.g. call a BNC connectored port 'BNC', not '10Mb'.
|
|
|
|
Changed the bus probing. EISA used to be done first, followed by PCI.
|
|
Most people probably don't even know what a de425 is today and the EISA
|
|
probe has messed up some SCSI cards in the past, so now PCI is always
|
|
probed first followed by EISA if a) the architecture allows EISA and
|
|
either b) there have been no PCI cards detected or c) an EISA probe is
|
|
forced by the user. To force a probe include "force_eisa" in your
|
|
insmod "args" line; for built-in kernels either change the driver to do
|
|
this automatically or include #define DE4X5_FORCE_EISA on or before
|
|
line 1040 in the driver.
|
|
|
|
TO DO:
|
|
------
|
|
|
|
Revision History
|
|
----------------
|
|
|
|
Version Date Description
|
|
|
|
0.1 17-Nov-94 Initial writing. ALPHA code release.
|
|
0.2 13-Jan-95 Added PCI support for DE435's.
|
|
0.21 19-Jan-95 Added auto media detection.
|
|
0.22 10-Feb-95 Fix interrupt handler call <chris@cosy.sbg.ac.at>.
|
|
Fix recognition bug reported by <bkm@star.rl.ac.uk>.
|
|
Add request/release_region code.
|
|
Add loadable modules support for PCI.
|
|
Clean up loadable modules support.
|
|
0.23 28-Feb-95 Added DC21041 and DC21140 support.
|
|
Fix missed frame counter value and initialisation.
|
|
Fixed EISA probe.
|
|
0.24 11-Apr-95 Change delay routine to use <linux/udelay>.
|
|
Change TX_BUFFS_AVAIL macro.
|
|
Change media autodetection to allow manual setting.
|
|
Completed DE500 (DC21140) support.
|
|
0.241 18-Apr-95 Interim release without DE500 Autosense Algorithm.
|
|
0.242 10-May-95 Minor changes.
|
|
0.30 12-Jun-95 Timer fix for DC21140.
|
|
Portability changes.
|
|
Add ALPHA changes from <jestabro@ant.tay1.dec.com>.
|
|
Add DE500 semi automatic autosense.
|
|
Add Link Fail interrupt TP failure detection.
|
|
Add timer based link change detection.
|
|
Plugged a memory leak in de4x5_queue_pkt().
|
|
0.31 13-Jun-95 Fixed PCI stuff for 1.3.1.
|
|
0.32 26-Jun-95 Added verify_area() calls in de4x5_ioctl() from a
|
|
suggestion by <heiko@colossus.escape.de>.
|
|
0.33 8-Aug-95 Add shared interrupt support (not released yet).
|
|
0.331 21-Aug-95 Fix de4x5_open() with fast CPUs.
|
|
Fix de4x5_interrupt().
|
|
Fix dc21140_autoconf() mess.
|
|
No shared interrupt support.
|
|
0.332 11-Sep-95 Added MII management interface routines.
|
|
0.40 5-Mar-96 Fix setup frame timeout <maartenb@hpkuipc.cern.ch>.
|
|
Add kernel timer code (h/w is too flaky).
|
|
Add MII based PHY autosense.
|
|
Add new multicasting code.
|
|
Add new autosense algorithms for media/mode
|
|
selection using kernel scheduling/timing.
|
|
Re-formatted.
|
|
Made changes suggested by <jeff@router.patch.net>:
|
|
Change driver to detect all DECchip based cards
|
|
with DEC_ONLY restriction a special case.
|
|
Changed driver to autoprobe as a module. No irq
|
|
checking is done now - assume BIOS is good!
|
|
Added SMC9332 detection <manabe@Roy.dsl.tutics.ac.jp>
|
|
0.41 21-Mar-96 Don't check for get_hw_addr checksum unless DEC card
|
|
only <niles@axp745gsfc.nasa.gov>
|
|
Fix for multiple PCI cards reported by <jos@xos.nl>
|
|
Duh, put the IRQF_SHARED flag into request_interrupt().
|
|
Fix SMC ethernet address in enet_det[].
|
|
Print chip name instead of "UNKNOWN" during boot.
|
|
0.42 26-Apr-96 Fix MII write TA bit error.
|
|
Fix bug in dc21040 and dc21041 autosense code.
|
|
Remove buffer copies on receive for Intels.
|
|
Change sk_buff handling during media disconnects to
|
|
eliminate DUP packets.
|
|
Add dynamic TX thresholding.
|
|
Change all chips to use perfect multicast filtering.
|
|
Fix alloc_device() bug <jari@markkus2.fimr.fi>
|
|
0.43 21-Jun-96 Fix unconnected media TX retry bug.
|
|
Add Accton to the list of broken cards.
|
|
Fix TX under-run bug for non DC21140 chips.
|
|
Fix boot command probe bug in alloc_device() as
|
|
reported by <koen.gadeyne@barco.com> and
|
|
<orava@nether.tky.hut.fi>.
|
|
Add cache locks to prevent a race condition as
|
|
reported by <csd@microplex.com> and
|
|
<baba@beckman.uiuc.edu>.
|
|
Upgraded alloc_device() code.
|
|
0.431 28-Jun-96 Fix potential bug in queue_pkt() from discussion
|
|
with <csd@microplex.com>
|
|
0.44 13-Aug-96 Fix RX overflow bug in 2114[023] chips.
|
|
Fix EISA probe bugs reported by <os2@kpi.kharkov.ua>
|
|
and <michael@compurex.com>.
|
|
0.441 9-Sep-96 Change dc21041_autoconf() to probe quiet BNC media
|
|
with a loopback packet.
|
|
0.442 9-Sep-96 Include AUI in dc21041 media printout. Bug reported
|
|
by <bhat@mundook.cs.mu.OZ.AU>
|
|
0.45 8-Dec-96 Include endian functions for PPC use, from work
|
|
by <cort@cs.nmt.edu> and <g.thomas@opengroup.org>.
|
|
0.451 28-Dec-96 Added fix to allow autoprobe for modules after
|
|
suggestion from <mjacob@feral.com>.
|
|
0.5 30-Jan-97 Added SROM decoding functions.
|
|
Updated debug flags.
|
|
Fix sleep/wakeup calls for PCI cards, bug reported
|
|
by <cross@gweep.lkg.dec.com>.
|
|
Added multi-MAC, one SROM feature from discussion
|
|
with <mjacob@feral.com>.
|
|
Added full module autoprobe capability.
|
|
Added attempt to use an SMC9332 with broken SROM.
|
|
Added fix for ZYNX multi-mac cards that didn't
|
|
get their IRQs wired correctly.
|
|
0.51 13-Feb-97 Added endian fixes for the SROM accesses from
|
|
<paubert@iram.es>
|
|
Fix init_connection() to remove extra device reset.
|
|
Fix MAC/PHY reset ordering in dc21140m_autoconf().
|
|
Fix initialisation problem with lp->timeout in
|
|
typeX_infoblock() from <paubert@iram.es>.
|
|
Fix MII PHY reset problem from work done by
|
|
<paubert@iram.es>.
|
|
0.52 26-Apr-97 Some changes may not credit the right people -
|
|
a disk crash meant I lost some mail.
|
|
Change RX interrupt routine to drop rather than
|
|
defer packets to avoid hang reported by
|
|
<g.thomas@opengroup.org>.
|
|
Fix srom_exec() to return for COMPACT and type 1
|
|
infoblocks.
|
|
Added DC21142 and DC21143 functions.
|
|
Added byte counters from <phil@tazenda.demon.co.uk>
|
|
Added IRQF_DISABLED temporary fix from
|
|
<mjacob@feral.com>.
|
|
0.53 12-Nov-97 Fix the *_probe() to include 'eth??' name during
|
|
module load: bug reported by
|
|
<Piete.Brooks@cl.cam.ac.uk>
|
|
Fix multi-MAC, one SROM, to work with 2114x chips:
|
|
bug reported by <cmetz@inner.net>.
|
|
Make above search independent of BIOS device scan
|
|
direction.
|
|
Completed DC2114[23] autosense functions.
|
|
0.531 21-Dec-97 Fix DE500-XA 100Mb/s bug reported by
|
|
<robin@intercore.com
|
|
Fix type1_infoblock() bug introduced in 0.53, from
|
|
problem reports by
|
|
<parmee@postecss.ncrfran.france.ncr.com> and
|
|
<jo@ice.dillingen.baynet.de>.
|
|
Added argument list to set up each board from either
|
|
a module's command line or a compiled in #define.
|
|
Added generic MII PHY functionality to deal with
|
|
newer PHY chips.
|
|
Fix the mess in 2.1.67.
|
|
0.532 5-Jan-98 Fix bug in mii_get_phy() reported by
|
|
<redhat@cococo.net>.
|
|
Fix bug in pci_probe() for 64 bit systems reported
|
|
by <belliott@accessone.com>.
|
|
0.533 9-Jan-98 Fix more 64 bit bugs reported by <jal@cs.brown.edu>.
|
|
0.534 24-Jan-98 Fix last (?) endian bug from <geert@linux-m68k.org>
|
|
0.535 21-Feb-98 Fix Ethernet Address PROM reset bug for DC21040.
|
|
0.536 21-Mar-98 Change pci_probe() to use the pci_dev structure.
|
|
**Incompatible with 2.0.x from here.**
|
|
0.540 5-Jul-98 Atomicize assertion of dev->interrupt for SMP
|
|
from <lma@varesearch.com>
|
|
Add TP, AUI and BNC cases to 21140m_autoconf() for
|
|
case where a 21140 under SROM control uses, e.g. AUI
|
|
from problem report by <delchini@lpnp09.in2p3.fr>
|
|
Add MII parallel detection to 2114x_autoconf() for
|
|
case where no autonegotiation partner exists from
|
|
problem report by <mlapsley@ndirect.co.uk>.
|
|
Add ability to force connection type directly even
|
|
when using SROM control from problem report by
|
|
<earl@exis.net>.
|
|
Updated the PCI interface to conform with the latest
|
|
version. I hope nothing is broken...
|
|
Add TX done interrupt modification from suggestion
|
|
by <Austin.Donnelly@cl.cam.ac.uk>.
|
|
Fix is_anc_capable() bug reported by
|
|
<Austin.Donnelly@cl.cam.ac.uk>.
|
|
Fix type[13]_infoblock() bug: during MII search, PHY
|
|
lp->rst not run because lp->ibn not initialised -
|
|
from report & fix by <paubert@iram.es>.
|
|
Fix probe bug with EISA & PCI cards present from
|
|
report by <eirik@netcom.com>.
|
|
0.541 24-Aug-98 Fix compiler problems associated with i386-string
|
|
ops from multiple bug reports and temporary fix
|
|
from <paubert@iram.es>.
|
|
Fix pci_probe() to correctly emulate the old
|
|
pcibios_find_class() function.
|
|
Add an_exception() for old ZYNX346 and fix compile
|
|
warning on PPC & SPARC, from <ecd@skynet.be>.
|
|
Fix lastPCI to correctly work with compiled in
|
|
kernels and modules from bug report by
|
|
<Zlatko.Calusic@CARNet.hr> et al.
|
|
0.542 15-Sep-98 Fix dc2114x_autoconf() to stop multiple messages
|
|
when media is unconnected.
|
|
Change dev->interrupt to lp->interrupt to ensure
|
|
alignment for Alpha's and avoid their unaligned
|
|
access traps. This flag is merely for log messages:
|
|
should do something more definitive though...
|
|
0.543 30-Dec-98 Add SMP spin locking.
|
|
0.544 8-May-99 Fix for buggy SROM in Motorola embedded boards using
|
|
a 21143 by <mmporter@home.com>.
|
|
Change PCI/EISA bus probing order.
|
|
0.545 28-Nov-99 Further Moto SROM bug fix from
|
|
<mporter@eng.mcd.mot.com>
|
|
Remove double checking for DEBUG_RX in de4x5_dbg_rx()
|
|
from report by <geert@linux-m68k.org>
|
|
0.546 22-Feb-01 Fixes Alpha XP1000 oops. The srom_search function
|
|
was causing a page fault when initializing the
|
|
variable 'pb', on a non de4x5 PCI device, in this
|
|
case a PCI bridge (DEC chip 21152). The value of
|
|
'pb' is now only initialized if a de4x5 chip is
|
|
present.
|
|
<france@handhelds.org>
|
|
0.547 08-Nov-01 Use library crc32 functions by <Matt_Domsch@dell.com>
|
|
0.548 30-Aug-03 Big 2.6 cleanup. Ported to PCI/EISA probing and
|
|
generic DMA APIs. Fixed DE425 support on Alpha.
|
|
<maz@wild-wind.fr.eu.org>
|
|
=========================================================================
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/eisa.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/time.h>
|
|
#include <linux/types.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/unaligned.h>
|
|
#include <asm/uaccess.h>
|
|
#ifdef CONFIG_PPC_PMAC
|
|
#include <asm/machdep.h>
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
#include "de4x5.h"
|
|
|
|
static const char version[] __devinitconst =
|
|
KERN_INFO "de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com\n";
|
|
|
|
#define c_char const char
|
|
|
|
/*
|
|
** MII Information
|
|
*/
|
|
struct phy_table {
|
|
int reset; /* Hard reset required? */
|
|
int id; /* IEEE OUI */
|
|
int ta; /* One cycle TA time - 802.3u is confusing here */
|
|
struct { /* Non autonegotiation (parallel) speed det. */
|
|
int reg;
|
|
int mask;
|
|
int value;
|
|
} spd;
|
|
};
|
|
|
|
struct mii_phy {
|
|
int reset; /* Hard reset required? */
|
|
int id; /* IEEE OUI */
|
|
int ta; /* One cycle TA time */
|
|
struct { /* Non autonegotiation (parallel) speed det. */
|
|
int reg;
|
|
int mask;
|
|
int value;
|
|
} spd;
|
|
int addr; /* MII address for the PHY */
|
|
u_char *gep; /* Start of GEP sequence block in SROM */
|
|
u_char *rst; /* Start of reset sequence in SROM */
|
|
u_int mc; /* Media Capabilities */
|
|
u_int ana; /* NWay Advertisement */
|
|
u_int fdx; /* Full DupleX capabilities for each media */
|
|
u_int ttm; /* Transmit Threshold Mode for each media */
|
|
u_int mci; /* 21142 MII Connector Interrupt info */
|
|
};
|
|
|
|
#define DE4X5_MAX_PHY 8 /* Allow upto 8 attached PHY devices per board */
|
|
|
|
struct sia_phy {
|
|
u_char mc; /* Media Code */
|
|
u_char ext; /* csr13-15 valid when set */
|
|
int csr13; /* SIA Connectivity Register */
|
|
int csr14; /* SIA TX/RX Register */
|
|
int csr15; /* SIA General Register */
|
|
int gepc; /* SIA GEP Control Information */
|
|
int gep; /* SIA GEP Data */
|
|
};
|
|
|
|
/*
|
|
** Define the know universe of PHY devices that can be
|
|
** recognised by this driver.
|
|
*/
|
|
static struct phy_table phy_info[] = {
|
|
{0, NATIONAL_TX, 1, {0x19, 0x40, 0x00}}, /* National TX */
|
|
{1, BROADCOM_T4, 1, {0x10, 0x02, 0x02}}, /* Broadcom T4 */
|
|
{0, SEEQ_T4 , 1, {0x12, 0x10, 0x10}}, /* SEEQ T4 */
|
|
{0, CYPRESS_T4 , 1, {0x05, 0x20, 0x20}}, /* Cypress T4 */
|
|
{0, 0x7810 , 1, {0x14, 0x0800, 0x0800}} /* Level One LTX970 */
|
|
};
|
|
|
|
/*
|
|
** These GENERIC values assumes that the PHY devices follow 802.3u and
|
|
** allow parallel detection to set the link partner ability register.
|
|
** Detection of 100Base-TX [H/F Duplex] and 100Base-T4 is supported.
|
|
*/
|
|
#define GENERIC_REG 0x05 /* Autoneg. Link Partner Advertisement Reg. */
|
|
#define GENERIC_MASK MII_ANLPA_100M /* All 100Mb/s Technologies */
|
|
#define GENERIC_VALUE MII_ANLPA_100M /* 100B-TX, 100B-TX FDX, 100B-T4 */
|
|
|
|
/*
|
|
** Define special SROM detection cases
|
|
*/
|
|
static c_char enet_det[][ETH_ALEN] = {
|
|
{0x00, 0x00, 0xc0, 0x00, 0x00, 0x00},
|
|
{0x00, 0x00, 0xe8, 0x00, 0x00, 0x00}
|
|
};
|
|
|
|
#define SMC 1
|
|
#define ACCTON 2
|
|
|
|
/*
|
|
** SROM Repair definitions. If a broken SROM is detected a card may
|
|
** use this information to help figure out what to do. This is a
|
|
** "stab in the dark" and so far for SMC9332's only.
|
|
*/
|
|
static c_char srom_repair_info[][100] = {
|
|
{0x00,0x1e,0x00,0x00,0x00,0x08, /* SMC9332 */
|
|
0x1f,0x01,0x8f,0x01,0x00,0x01,0x00,0x02,
|
|
0x01,0x00,0x00,0x78,0xe0,0x01,0x00,0x50,
|
|
0x00,0x18,}
|
|
};
|
|
|
|
|
|
#ifdef DE4X5_DEBUG
|
|
static int de4x5_debug = DE4X5_DEBUG;
|
|
#else
|
|
/*static int de4x5_debug = (DEBUG_MII | DEBUG_SROM | DEBUG_PCICFG | DEBUG_MEDIA | DEBUG_VERSION);*/
|
|
static int de4x5_debug = (DEBUG_MEDIA | DEBUG_VERSION);
|
|
#endif
|
|
|
|
/*
|
|
** Allow per adapter set up. For modules this is simply a command line
|
|
** parameter, e.g.:
|
|
** insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
|
|
**
|
|
** For a compiled in driver, place e.g.
|
|
** #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP"
|
|
** here
|
|
*/
|
|
#ifdef DE4X5_PARM
|
|
static char *args = DE4X5_PARM;
|
|
#else
|
|
static char *args;
|
|
#endif
|
|
|
|
struct parameters {
|
|
bool fdx;
|
|
int autosense;
|
|
};
|
|
|
|
#define DE4X5_AUTOSENSE_MS 250 /* msec autosense tick (DE500) */
|
|
|
|
#define DE4X5_NDA 0xffe0 /* No Device (I/O) Address */
|
|
|
|
/*
|
|
** Ethernet PROM defines
|
|
*/
|
|
#define PROBE_LENGTH 32
|
|
#define ETH_PROM_SIG 0xAA5500FFUL
|
|
|
|
/*
|
|
** Ethernet Info
|
|
*/
|
|
#define PKT_BUF_SZ 1536 /* Buffer size for each Tx/Rx buffer */
|
|
#define IEEE802_3_SZ 1518 /* Packet + CRC */
|
|
#define MAX_PKT_SZ 1514 /* Maximum ethernet packet length */
|
|
#define MAX_DAT_SZ 1500 /* Maximum ethernet data length */
|
|
#define MIN_DAT_SZ 1 /* Minimum ethernet data length */
|
|
#define PKT_HDR_LEN 14 /* Addresses and data length info */
|
|
#define FAKE_FRAME_LEN (MAX_PKT_SZ + 1)
|
|
#define QUEUE_PKT_TIMEOUT (3*HZ) /* 3 second timeout */
|
|
|
|
|
|
/*
|
|
** EISA bus defines
|
|
*/
|
|
#define DE4X5_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */
|
|
#define DE4X5_EISA_TOTAL_SIZE 0x100 /* I/O address extent */
|
|
|
|
#define EISA_ALLOWED_IRQ_LIST {5, 9, 10, 11}
|
|
|
|
#define DE4X5_SIGNATURE {"DE425","DE434","DE435","DE450","DE500"}
|
|
#define DE4X5_NAME_LENGTH 8
|
|
|
|
static c_char *de4x5_signatures[] = DE4X5_SIGNATURE;
|
|
|
|
/*
|
|
** Ethernet PROM defines for DC21040
|
|
*/
|
|
#define PROBE_LENGTH 32
|
|
#define ETH_PROM_SIG 0xAA5500FFUL
|
|
|
|
/*
|
|
** PCI Bus defines
|
|
*/
|
|
#define PCI_MAX_BUS_NUM 8
|
|
#define DE4X5_PCI_TOTAL_SIZE 0x80 /* I/O address extent */
|
|
#define DE4X5_CLASS_CODE 0x00020000 /* Network controller, Ethernet */
|
|
|
|
/*
|
|
** Memory Alignment. Each descriptor is 4 longwords long. To force a
|
|
** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and
|
|
** DESC_ALIGN. ALIGN aligns the start address of the private memory area
|
|
** and hence the RX descriptor ring's first entry.
|
|
*/
|
|
#define DE4X5_ALIGN4 ((u_long)4 - 1) /* 1 longword align */
|
|
#define DE4X5_ALIGN8 ((u_long)8 - 1) /* 2 longword align */
|
|
#define DE4X5_ALIGN16 ((u_long)16 - 1) /* 4 longword align */
|
|
#define DE4X5_ALIGN32 ((u_long)32 - 1) /* 8 longword align */
|
|
#define DE4X5_ALIGN64 ((u_long)64 - 1) /* 16 longword align */
|
|
#define DE4X5_ALIGN128 ((u_long)128 - 1) /* 32 longword align */
|
|
|
|
#define DE4X5_ALIGN DE4X5_ALIGN32 /* Keep the DC21040 happy... */
|
|
#define DE4X5_CACHE_ALIGN CAL_16LONG
|
|
#define DESC_SKIP_LEN DSL_0 /* Must agree with DESC_ALIGN */
|
|
/*#define DESC_ALIGN u32 dummy[4]; / * Must agree with DESC_SKIP_LEN */
|
|
#define DESC_ALIGN
|
|
|
|
#ifndef DEC_ONLY /* See README.de4x5 for using this */
|
|
static int dec_only;
|
|
#else
|
|
static int dec_only = 1;
|
|
#endif
|
|
|
|
/*
|
|
** DE4X5 IRQ ENABLE/DISABLE
|
|
*/
|
|
#define ENABLE_IRQs { \
|
|
imr |= lp->irq_en;\
|
|
outl(imr, DE4X5_IMR); /* Enable the IRQs */\
|
|
}
|
|
|
|
#define DISABLE_IRQs {\
|
|
imr = inl(DE4X5_IMR);\
|
|
imr &= ~lp->irq_en;\
|
|
outl(imr, DE4X5_IMR); /* Disable the IRQs */\
|
|
}
|
|
|
|
#define UNMASK_IRQs {\
|
|
imr |= lp->irq_mask;\
|
|
outl(imr, DE4X5_IMR); /* Unmask the IRQs */\
|
|
}
|
|
|
|
#define MASK_IRQs {\
|
|
imr = inl(DE4X5_IMR);\
|
|
imr &= ~lp->irq_mask;\
|
|
outl(imr, DE4X5_IMR); /* Mask the IRQs */\
|
|
}
|
|
|
|
/*
|
|
** DE4X5 START/STOP
|
|
*/
|
|
#define START_DE4X5 {\
|
|
omr = inl(DE4X5_OMR);\
|
|
omr |= OMR_ST | OMR_SR;\
|
|
outl(omr, DE4X5_OMR); /* Enable the TX and/or RX */\
|
|
}
|
|
|
|
#define STOP_DE4X5 {\
|
|
omr = inl(DE4X5_OMR);\
|
|
omr &= ~(OMR_ST|OMR_SR);\
|
|
outl(omr, DE4X5_OMR); /* Disable the TX and/or RX */ \
|
|
}
|
|
|
|
/*
|
|
** DE4X5 SIA RESET
|
|
*/
|
|
#define RESET_SIA outl(0, DE4X5_SICR); /* Reset SIA connectivity regs */
|
|
|
|
/*
|
|
** DE500 AUTOSENSE TIMER INTERVAL (MILLISECS)
|
|
*/
|
|
#define DE4X5_AUTOSENSE_MS 250
|
|
|
|
/*
|
|
** SROM Structure
|
|
*/
|
|
struct de4x5_srom {
|
|
char sub_vendor_id[2];
|
|
char sub_system_id[2];
|
|
char reserved[12];
|
|
char id_block_crc;
|
|
char reserved2;
|
|
char version;
|
|
char num_controllers;
|
|
char ieee_addr[6];
|
|
char info[100];
|
|
short chksum;
|
|
};
|
|
#define SUB_VENDOR_ID 0x500a
|
|
|
|
/*
|
|
** DE4X5 Descriptors. Make sure that all the RX buffers are contiguous
|
|
** and have sizes of both a power of 2 and a multiple of 4.
|
|
** A size of 256 bytes for each buffer could be chosen because over 90% of
|
|
** all packets in our network are <256 bytes long and 64 longword alignment
|
|
** is possible. 1536 showed better 'ttcp' performance. Take your pick. 32 TX
|
|
** descriptors are needed for machines with an ALPHA CPU.
|
|
*/
|
|
#define NUM_RX_DESC 8 /* Number of RX descriptors */
|
|
#define NUM_TX_DESC 32 /* Number of TX descriptors */
|
|
#define RX_BUFF_SZ 1536 /* Power of 2 for kmalloc and */
|
|
/* Multiple of 4 for DC21040 */
|
|
/* Allows 512 byte alignment */
|
|
struct de4x5_desc {
|
|
volatile __le32 status;
|
|
__le32 des1;
|
|
__le32 buf;
|
|
__le32 next;
|
|
DESC_ALIGN
|
|
};
|
|
|
|
/*
|
|
** The DE4X5 private structure
|
|
*/
|
|
#define DE4X5_PKT_STAT_SZ 16
|
|
#define DE4X5_PKT_BIN_SZ 128 /* Should be >=100 unless you
|
|
increase DE4X5_PKT_STAT_SZ */
|
|
|
|
struct pkt_stats {
|
|
u_int bins[DE4X5_PKT_STAT_SZ]; /* Private stats counters */
|
|
u_int unicast;
|
|
u_int multicast;
|
|
u_int broadcast;
|
|
u_int excessive_collisions;
|
|
u_int tx_underruns;
|
|
u_int excessive_underruns;
|
|
u_int rx_runt_frames;
|
|
u_int rx_collision;
|
|
u_int rx_dribble;
|
|
u_int rx_overflow;
|
|
};
|
|
|
|
struct de4x5_private {
|
|
char adapter_name[80]; /* Adapter name */
|
|
u_long interrupt; /* Aligned ISR flag */
|
|
struct de4x5_desc *rx_ring; /* RX descriptor ring */
|
|
struct de4x5_desc *tx_ring; /* TX descriptor ring */
|
|
struct sk_buff *tx_skb[NUM_TX_DESC]; /* TX skb for freeing when sent */
|
|
struct sk_buff *rx_skb[NUM_RX_DESC]; /* RX skb's */
|
|
int rx_new, rx_old; /* RX descriptor ring pointers */
|
|
int tx_new, tx_old; /* TX descriptor ring pointers */
|
|
char setup_frame[SETUP_FRAME_LEN]; /* Holds MCA and PA info. */
|
|
char frame[64]; /* Min sized packet for loopback*/
|
|
spinlock_t lock; /* Adapter specific spinlock */
|
|
struct net_device_stats stats; /* Public stats */
|
|
struct pkt_stats pktStats; /* Private stats counters */
|
|
char rxRingSize;
|
|
char txRingSize;
|
|
int bus; /* EISA or PCI */
|
|
int bus_num; /* PCI Bus number */
|
|
int device; /* Device number on PCI bus */
|
|
int state; /* Adapter OPENED or CLOSED */
|
|
int chipset; /* DC21040, DC21041 or DC21140 */
|
|
s32 irq_mask; /* Interrupt Mask (Enable) bits */
|
|
s32 irq_en; /* Summary interrupt bits */
|
|
int media; /* Media (eg TP), mode (eg 100B)*/
|
|
int c_media; /* Remember the last media conn */
|
|
bool fdx; /* media full duplex flag */
|
|
int linkOK; /* Link is OK */
|
|
int autosense; /* Allow/disallow autosensing */
|
|
bool tx_enable; /* Enable descriptor polling */
|
|
int setup_f; /* Setup frame filtering type */
|
|
int local_state; /* State within a 'media' state */
|
|
struct mii_phy phy[DE4X5_MAX_PHY]; /* List of attached PHY devices */
|
|
struct sia_phy sia; /* SIA PHY Information */
|
|
int active; /* Index to active PHY device */
|
|
int mii_cnt; /* Number of attached PHY's */
|
|
int timeout; /* Scheduling counter */
|
|
struct timer_list timer; /* Timer info for kernel */
|
|
int tmp; /* Temporary global per card */
|
|
struct {
|
|
u_long lock; /* Lock the cache accesses */
|
|
s32 csr0; /* Saved Bus Mode Register */
|
|
s32 csr6; /* Saved Operating Mode Reg. */
|
|
s32 csr7; /* Saved IRQ Mask Register */
|
|
s32 gep; /* Saved General Purpose Reg. */
|
|
s32 gepc; /* Control info for GEP */
|
|
s32 csr13; /* Saved SIA Connectivity Reg. */
|
|
s32 csr14; /* Saved SIA TX/RX Register */
|
|
s32 csr15; /* Saved SIA General Register */
|
|
int save_cnt; /* Flag if state already saved */
|
|
struct sk_buff_head queue; /* Save the (re-ordered) skb's */
|
|
} cache;
|
|
struct de4x5_srom srom; /* A copy of the SROM */
|
|
int cfrv; /* Card CFRV copy */
|
|
int rx_ovf; /* Check for 'RX overflow' tag */
|
|
bool useSROM; /* For non-DEC card use SROM */
|
|
bool useMII; /* Infoblock using the MII */
|
|
int asBitValid; /* Autosense bits in GEP? */
|
|
int asPolarity; /* 0 => asserted high */
|
|
int asBit; /* Autosense bit number in GEP */
|
|
int defMedium; /* SROM default medium */
|
|
int tcount; /* Last infoblock number */
|
|
int infoblock_init; /* Initialised this infoblock? */
|
|
int infoleaf_offset; /* SROM infoleaf for controller */
|
|
s32 infoblock_csr6; /* csr6 value in SROM infoblock */
|
|
int infoblock_media; /* infoblock media */
|
|
int (*infoleaf_fn)(struct net_device *); /* Pointer to infoleaf function */
|
|
u_char *rst; /* Pointer to Type 5 reset info */
|
|
u_char ibn; /* Infoblock number */
|
|
struct parameters params; /* Command line/ #defined params */
|
|
struct device *gendev; /* Generic device */
|
|
dma_addr_t dma_rings; /* DMA handle for rings */
|
|
int dma_size; /* Size of the DMA area */
|
|
char *rx_bufs; /* rx bufs on alpha, sparc, ... */
|
|
};
|
|
|
|
/*
|
|
** To get around certain poxy cards that don't provide an SROM
|
|
** for the second and more DECchip, I have to key off the first
|
|
** chip's address. I'll assume there's not a bad SROM iff:
|
|
**
|
|
** o the chipset is the same
|
|
** o the bus number is the same and > 0
|
|
** o the sum of all the returned hw address bytes is 0 or 0x5fa
|
|
**
|
|
** Also have to save the irq for those cards whose hardware designers
|
|
** can't follow the PCI to PCI Bridge Architecture spec.
|
|
*/
|
|
static struct {
|
|
int chipset;
|
|
int bus;
|
|
int irq;
|
|
u_char addr[ETH_ALEN];
|
|
} last = {0,};
|
|
|
|
/*
|
|
** The transmit ring full condition is described by the tx_old and tx_new
|
|
** pointers by:
|
|
** tx_old = tx_new Empty ring
|
|
** tx_old = tx_new+1 Full ring
|
|
** tx_old+txRingSize = tx_new+1 Full ring (wrapped condition)
|
|
*/
|
|
#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\
|
|
lp->tx_old+lp->txRingSize-lp->tx_new-1:\
|
|
lp->tx_old -lp->tx_new-1)
|
|
|
|
#define TX_PKT_PENDING (lp->tx_old != lp->tx_new)
|
|
|
|
/*
|
|
** Public Functions
|
|
*/
|
|
static int de4x5_open(struct net_device *dev);
|
|
static int de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev);
|
|
static irqreturn_t de4x5_interrupt(int irq, void *dev_id);
|
|
static int de4x5_close(struct net_device *dev);
|
|
static struct net_device_stats *de4x5_get_stats(struct net_device *dev);
|
|
static void de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len);
|
|
static void set_multicast_list(struct net_device *dev);
|
|
static int de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
|
|
/*
|
|
** Private functions
|
|
*/
|
|
static int de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev);
|
|
static int de4x5_init(struct net_device *dev);
|
|
static int de4x5_sw_reset(struct net_device *dev);
|
|
static int de4x5_rx(struct net_device *dev);
|
|
static int de4x5_tx(struct net_device *dev);
|
|
static void de4x5_ast(struct net_device *dev);
|
|
static int de4x5_txur(struct net_device *dev);
|
|
static int de4x5_rx_ovfc(struct net_device *dev);
|
|
|
|
static int autoconf_media(struct net_device *dev);
|
|
static void create_packet(struct net_device *dev, char *frame, int len);
|
|
static void load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb);
|
|
static int dc21040_autoconf(struct net_device *dev);
|
|
static int dc21041_autoconf(struct net_device *dev);
|
|
static int dc21140m_autoconf(struct net_device *dev);
|
|
static int dc2114x_autoconf(struct net_device *dev);
|
|
static int srom_autoconf(struct net_device *dev);
|
|
static int de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state, int (*fn)(struct net_device *, int), int (*asfn)(struct net_device *));
|
|
static int dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout, int next_state, int suspect_state, int (*fn)(struct net_device *, int));
|
|
static int test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec);
|
|
static int test_for_100Mb(struct net_device *dev, int msec);
|
|
static int wait_for_link(struct net_device *dev);
|
|
static int test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec);
|
|
static int is_spd_100(struct net_device *dev);
|
|
static int is_100_up(struct net_device *dev);
|
|
static int is_10_up(struct net_device *dev);
|
|
static int is_anc_capable(struct net_device *dev);
|
|
static int ping_media(struct net_device *dev, int msec);
|
|
static struct sk_buff *de4x5_alloc_rx_buff(struct net_device *dev, int index, int len);
|
|
static void de4x5_free_rx_buffs(struct net_device *dev);
|
|
static void de4x5_free_tx_buffs(struct net_device *dev);
|
|
static void de4x5_save_skbs(struct net_device *dev);
|
|
static void de4x5_rst_desc_ring(struct net_device *dev);
|
|
static void de4x5_cache_state(struct net_device *dev, int flag);
|
|
static void de4x5_put_cache(struct net_device *dev, struct sk_buff *skb);
|
|
static void de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb);
|
|
static struct sk_buff *de4x5_get_cache(struct net_device *dev);
|
|
static void de4x5_setup_intr(struct net_device *dev);
|
|
static void de4x5_init_connection(struct net_device *dev);
|
|
static int de4x5_reset_phy(struct net_device *dev);
|
|
static void reset_init_sia(struct net_device *dev, s32 sicr, s32 strr, s32 sigr);
|
|
static int test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec);
|
|
static int test_tp(struct net_device *dev, s32 msec);
|
|
static int EISA_signature(char *name, struct device *device);
|
|
static int PCI_signature(char *name, struct de4x5_private *lp);
|
|
static void DevicePresent(struct net_device *dev, u_long iobase);
|
|
static void enet_addr_rst(u_long aprom_addr);
|
|
static int de4x5_bad_srom(struct de4x5_private *lp);
|
|
static short srom_rd(u_long address, u_char offset);
|
|
static void srom_latch(u_int command, u_long address);
|
|
static void srom_command(u_int command, u_long address);
|
|
static void srom_address(u_int command, u_long address, u_char offset);
|
|
static short srom_data(u_int command, u_long address);
|
|
/*static void srom_busy(u_int command, u_long address);*/
|
|
static void sendto_srom(u_int command, u_long addr);
|
|
static int getfrom_srom(u_long addr);
|
|
static int srom_map_media(struct net_device *dev);
|
|
static int srom_infoleaf_info(struct net_device *dev);
|
|
static void srom_init(struct net_device *dev);
|
|
static void srom_exec(struct net_device *dev, u_char *p);
|
|
static int mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr);
|
|
static void mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr);
|
|
static int mii_rdata(u_long ioaddr);
|
|
static void mii_wdata(int data, int len, u_long ioaddr);
|
|
static void mii_ta(u_long rw, u_long ioaddr);
|
|
static int mii_swap(int data, int len);
|
|
static void mii_address(u_char addr, u_long ioaddr);
|
|
static void sendto_mii(u32 command, int data, u_long ioaddr);
|
|
static int getfrom_mii(u32 command, u_long ioaddr);
|
|
static int mii_get_oui(u_char phyaddr, u_long ioaddr);
|
|
static int mii_get_phy(struct net_device *dev);
|
|
static void SetMulticastFilter(struct net_device *dev);
|
|
static int get_hw_addr(struct net_device *dev);
|
|
static void srom_repair(struct net_device *dev, int card);
|
|
static int test_bad_enet(struct net_device *dev, int status);
|
|
static int an_exception(struct de4x5_private *lp);
|
|
static char *build_setup_frame(struct net_device *dev, int mode);
|
|
static void disable_ast(struct net_device *dev);
|
|
static long de4x5_switch_mac_port(struct net_device *dev);
|
|
static int gep_rd(struct net_device *dev);
|
|
static void gep_wr(s32 data, struct net_device *dev);
|
|
static void yawn(struct net_device *dev, int state);
|
|
static void de4x5_parse_params(struct net_device *dev);
|
|
static void de4x5_dbg_open(struct net_device *dev);
|
|
static void de4x5_dbg_mii(struct net_device *dev, int k);
|
|
static void de4x5_dbg_media(struct net_device *dev);
|
|
static void de4x5_dbg_srom(struct de4x5_srom *p);
|
|
static void de4x5_dbg_rx(struct sk_buff *skb, int len);
|
|
static int de4x5_strncmp(char *a, char *b, int n);
|
|
static int dc21041_infoleaf(struct net_device *dev);
|
|
static int dc21140_infoleaf(struct net_device *dev);
|
|
static int dc21142_infoleaf(struct net_device *dev);
|
|
static int dc21143_infoleaf(struct net_device *dev);
|
|
static int type0_infoblock(struct net_device *dev, u_char count, u_char *p);
|
|
static int type1_infoblock(struct net_device *dev, u_char count, u_char *p);
|
|
static int type2_infoblock(struct net_device *dev, u_char count, u_char *p);
|
|
static int type3_infoblock(struct net_device *dev, u_char count, u_char *p);
|
|
static int type4_infoblock(struct net_device *dev, u_char count, u_char *p);
|
|
static int type5_infoblock(struct net_device *dev, u_char count, u_char *p);
|
|
static int compact_infoblock(struct net_device *dev, u_char count, u_char *p);
|
|
|
|
/*
|
|
** Note now that module autoprobing is allowed under EISA and PCI. The
|
|
** IRQ lines will not be auto-detected; instead I'll rely on the BIOSes
|
|
** to "do the right thing".
|
|
*/
|
|
|
|
static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED */
|
|
|
|
module_param(io, int, 0);
|
|
module_param(de4x5_debug, int, 0);
|
|
module_param(dec_only, int, 0);
|
|
module_param(args, charp, 0);
|
|
|
|
MODULE_PARM_DESC(io, "de4x5 I/O base address");
|
|
MODULE_PARM_DESC(de4x5_debug, "de4x5 debug mask");
|
|
MODULE_PARM_DESC(dec_only, "de4x5 probe only for Digital boards (0-1)");
|
|
MODULE_PARM_DESC(args, "de4x5 full duplex and media type settings; see de4x5.c for details");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/*
|
|
** List the SROM infoleaf functions and chipsets
|
|
*/
|
|
struct InfoLeaf {
|
|
int chipset;
|
|
int (*fn)(struct net_device *);
|
|
};
|
|
static struct InfoLeaf infoleaf_array[] = {
|
|
{DC21041, dc21041_infoleaf},
|
|
{DC21140, dc21140_infoleaf},
|
|
{DC21142, dc21142_infoleaf},
|
|
{DC21143, dc21143_infoleaf}
|
|
};
|
|
#define INFOLEAF_SIZE ARRAY_SIZE(infoleaf_array)
|
|
|
|
/*
|
|
** List the SROM info block functions
|
|
*/
|
|
static int (*dc_infoblock[])(struct net_device *dev, u_char, u_char *) = {
|
|
type0_infoblock,
|
|
type1_infoblock,
|
|
type2_infoblock,
|
|
type3_infoblock,
|
|
type4_infoblock,
|
|
type5_infoblock,
|
|
compact_infoblock
|
|
};
|
|
|
|
#define COMPACT (ARRAY_SIZE(dc_infoblock) - 1)
|
|
|
|
/*
|
|
** Miscellaneous defines...
|
|
*/
|
|
#define RESET_DE4X5 {\
|
|
int i;\
|
|
i=inl(DE4X5_BMR);\
|
|
mdelay(1);\
|
|
outl(i | BMR_SWR, DE4X5_BMR);\
|
|
mdelay(1);\
|
|
outl(i, DE4X5_BMR);\
|
|
mdelay(1);\
|
|
for (i=0;i<5;i++) {inl(DE4X5_BMR); mdelay(1);}\
|
|
mdelay(1);\
|
|
}
|
|
|
|
#define PHY_HARD_RESET {\
|
|
outl(GEP_HRST, DE4X5_GEP); /* Hard RESET the PHY dev. */\
|
|
mdelay(1); /* Assert for 1ms */\
|
|
outl(0x00, DE4X5_GEP);\
|
|
mdelay(2); /* Wait for 2ms */\
|
|
}
|
|
|
|
static const struct net_device_ops de4x5_netdev_ops = {
|
|
.ndo_open = de4x5_open,
|
|
.ndo_stop = de4x5_close,
|
|
.ndo_start_xmit = de4x5_queue_pkt,
|
|
.ndo_get_stats = de4x5_get_stats,
|
|
.ndo_set_multicast_list = set_multicast_list,
|
|
.ndo_do_ioctl = de4x5_ioctl,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
.ndo_set_mac_address= eth_mac_addr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
};
|
|
|
|
|
|
static int __devinit
|
|
de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
|
|
{
|
|
char name[DE4X5_NAME_LENGTH + 1];
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
struct pci_dev *pdev = NULL;
|
|
int i, status=0;
|
|
|
|
dev_set_drvdata(gendev, dev);
|
|
|
|
/* Ensure we're not sleeping */
|
|
if (lp->bus == EISA) {
|
|
outb(WAKEUP, PCI_CFPM);
|
|
} else {
|
|
pdev = to_pci_dev (gendev);
|
|
pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP);
|
|
}
|
|
mdelay(10);
|
|
|
|
RESET_DE4X5;
|
|
|
|
if ((inl(DE4X5_STS) & (STS_TS | STS_RS)) != 0) {
|
|
return -ENXIO; /* Hardware could not reset */
|
|
}
|
|
|
|
/*
|
|
** Now find out what kind of DC21040/DC21041/DC21140 board we have.
|
|
*/
|
|
lp->useSROM = false;
|
|
if (lp->bus == PCI) {
|
|
PCI_signature(name, lp);
|
|
} else {
|
|
EISA_signature(name, gendev);
|
|
}
|
|
|
|
if (*name == '\0') { /* Not found a board signature */
|
|
return -ENXIO;
|
|
}
|
|
|
|
dev->base_addr = iobase;
|
|
printk ("%s: %s at 0x%04lx", dev_name(gendev), name, iobase);
|
|
|
|
status = get_hw_addr(dev);
|
|
printk(", h/w address %pM\n", dev->dev_addr);
|
|
|
|
if (status != 0) {
|
|
printk(" which has an Ethernet PROM CRC error.\n");
|
|
return -ENXIO;
|
|
} else {
|
|
skb_queue_head_init(&lp->cache.queue);
|
|
lp->cache.gepc = GEP_INIT;
|
|
lp->asBit = GEP_SLNK;
|
|
lp->asPolarity = GEP_SLNK;
|
|
lp->asBitValid = ~0;
|
|
lp->timeout = -1;
|
|
lp->gendev = gendev;
|
|
spin_lock_init(&lp->lock);
|
|
init_timer(&lp->timer);
|
|
lp->timer.function = (void (*)(unsigned long))de4x5_ast;
|
|
lp->timer.data = (unsigned long)dev;
|
|
de4x5_parse_params(dev);
|
|
|
|
/*
|
|
** Choose correct autosensing in case someone messed up
|
|
*/
|
|
lp->autosense = lp->params.autosense;
|
|
if (lp->chipset != DC21140) {
|
|
if ((lp->chipset==DC21040) && (lp->params.autosense&TP_NW)) {
|
|
lp->params.autosense = TP;
|
|
}
|
|
if ((lp->chipset==DC21041) && (lp->params.autosense&BNC_AUI)) {
|
|
lp->params.autosense = BNC;
|
|
}
|
|
}
|
|
lp->fdx = lp->params.fdx;
|
|
sprintf(lp->adapter_name,"%s (%s)", name, dev_name(gendev));
|
|
|
|
lp->dma_size = (NUM_RX_DESC + NUM_TX_DESC) * sizeof(struct de4x5_desc);
|
|
#if defined(__alpha__) || defined(__powerpc__) || defined(CONFIG_SPARC) || defined(DE4X5_DO_MEMCPY)
|
|
lp->dma_size += RX_BUFF_SZ * NUM_RX_DESC + DE4X5_ALIGN;
|
|
#endif
|
|
lp->rx_ring = dma_alloc_coherent(gendev, lp->dma_size,
|
|
&lp->dma_rings, GFP_ATOMIC);
|
|
if (lp->rx_ring == NULL) {
|
|
return -ENOMEM;
|
|
}
|
|
|
|
lp->tx_ring = lp->rx_ring + NUM_RX_DESC;
|
|
|
|
/*
|
|
** Set up the RX descriptor ring (Intels)
|
|
** Allocate contiguous receive buffers, long word aligned (Alphas)
|
|
*/
|
|
#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
|
|
for (i=0; i<NUM_RX_DESC; i++) {
|
|
lp->rx_ring[i].status = 0;
|
|
lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
|
|
lp->rx_ring[i].buf = 0;
|
|
lp->rx_ring[i].next = 0;
|
|
lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */
|
|
}
|
|
|
|
#else
|
|
{
|
|
dma_addr_t dma_rx_bufs;
|
|
|
|
dma_rx_bufs = lp->dma_rings + (NUM_RX_DESC + NUM_TX_DESC)
|
|
* sizeof(struct de4x5_desc);
|
|
dma_rx_bufs = (dma_rx_bufs + DE4X5_ALIGN) & ~DE4X5_ALIGN;
|
|
lp->rx_bufs = (char *)(((long)(lp->rx_ring + NUM_RX_DESC
|
|
+ NUM_TX_DESC) + DE4X5_ALIGN) & ~DE4X5_ALIGN);
|
|
for (i=0; i<NUM_RX_DESC; i++) {
|
|
lp->rx_ring[i].status = 0;
|
|
lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
|
|
lp->rx_ring[i].buf =
|
|
cpu_to_le32(dma_rx_bufs+i*RX_BUFF_SZ);
|
|
lp->rx_ring[i].next = 0;
|
|
lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */
|
|
}
|
|
|
|
}
|
|
#endif
|
|
|
|
barrier();
|
|
|
|
lp->rxRingSize = NUM_RX_DESC;
|
|
lp->txRingSize = NUM_TX_DESC;
|
|
|
|
/* Write the end of list marker to the descriptor lists */
|
|
lp->rx_ring[lp->rxRingSize - 1].des1 |= cpu_to_le32(RD_RER);
|
|
lp->tx_ring[lp->txRingSize - 1].des1 |= cpu_to_le32(TD_TER);
|
|
|
|
/* Tell the adapter where the TX/RX rings are located. */
|
|
outl(lp->dma_rings, DE4X5_RRBA);
|
|
outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
|
|
DE4X5_TRBA);
|
|
|
|
/* Initialise the IRQ mask and Enable/Disable */
|
|
lp->irq_mask = IMR_RIM | IMR_TIM | IMR_TUM | IMR_UNM;
|
|
lp->irq_en = IMR_NIM | IMR_AIM;
|
|
|
|
/* Create a loopback packet frame for later media probing */
|
|
create_packet(dev, lp->frame, sizeof(lp->frame));
|
|
|
|
/* Check if the RX overflow bug needs testing for */
|
|
i = lp->cfrv & 0x000000fe;
|
|
if ((lp->chipset == DC21140) && (i == 0x20)) {
|
|
lp->rx_ovf = 1;
|
|
}
|
|
|
|
/* Initialise the SROM pointers if possible */
|
|
if (lp->useSROM) {
|
|
lp->state = INITIALISED;
|
|
if (srom_infoleaf_info(dev)) {
|
|
dma_free_coherent (gendev, lp->dma_size,
|
|
lp->rx_ring, lp->dma_rings);
|
|
return -ENXIO;
|
|
}
|
|
srom_init(dev);
|
|
}
|
|
|
|
lp->state = CLOSED;
|
|
|
|
/*
|
|
** Check for an MII interface
|
|
*/
|
|
if ((lp->chipset != DC21040) && (lp->chipset != DC21041)) {
|
|
mii_get_phy(dev);
|
|
}
|
|
|
|
printk(" and requires IRQ%d (provided by %s).\n", dev->irq,
|
|
((lp->bus == PCI) ? "PCI BIOS" : "EISA CNFG"));
|
|
}
|
|
|
|
if (de4x5_debug & DEBUG_VERSION) {
|
|
printk(version);
|
|
}
|
|
|
|
/* The DE4X5-specific entries in the device structure. */
|
|
SET_NETDEV_DEV(dev, gendev);
|
|
dev->netdev_ops = &de4x5_netdev_ops;
|
|
dev->mem_start = 0;
|
|
|
|
/* Fill in the generic fields of the device structure. */
|
|
if ((status = register_netdev (dev))) {
|
|
dma_free_coherent (gendev, lp->dma_size,
|
|
lp->rx_ring, lp->dma_rings);
|
|
return status;
|
|
}
|
|
|
|
/* Let the adapter sleep to save power */
|
|
yawn(dev, SLEEP);
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
static int
|
|
de4x5_open(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int i, status = 0;
|
|
s32 omr;
|
|
|
|
/* Allocate the RX buffers */
|
|
for (i=0; i<lp->rxRingSize; i++) {
|
|
if (de4x5_alloc_rx_buff(dev, i, 0) == NULL) {
|
|
de4x5_free_rx_buffs(dev);
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
|
|
/*
|
|
** Wake up the adapter
|
|
*/
|
|
yawn(dev, WAKEUP);
|
|
|
|
/*
|
|
** Re-initialize the DE4X5...
|
|
*/
|
|
status = de4x5_init(dev);
|
|
spin_lock_init(&lp->lock);
|
|
lp->state = OPEN;
|
|
de4x5_dbg_open(dev);
|
|
|
|
if (request_irq(dev->irq, de4x5_interrupt, IRQF_SHARED,
|
|
lp->adapter_name, dev)) {
|
|
printk("de4x5_open(): Requested IRQ%d is busy - attemping FAST/SHARE...", dev->irq);
|
|
if (request_irq(dev->irq, de4x5_interrupt, IRQF_DISABLED | IRQF_SHARED,
|
|
lp->adapter_name, dev)) {
|
|
printk("\n Cannot get IRQ- reconfigure your hardware.\n");
|
|
disable_ast(dev);
|
|
de4x5_free_rx_buffs(dev);
|
|
de4x5_free_tx_buffs(dev);
|
|
yawn(dev, SLEEP);
|
|
lp->state = CLOSED;
|
|
return -EAGAIN;
|
|
} else {
|
|
printk("\n Succeeded, but you should reconfigure your hardware to avoid this.\n");
|
|
printk("WARNING: there may be IRQ related problems in heavily loaded systems.\n");
|
|
}
|
|
}
|
|
|
|
lp->interrupt = UNMASK_INTERRUPTS;
|
|
dev->trans_start = jiffies;
|
|
|
|
START_DE4X5;
|
|
|
|
de4x5_setup_intr(dev);
|
|
|
|
if (de4x5_debug & DEBUG_OPEN) {
|
|
printk("\tsts: 0x%08x\n", inl(DE4X5_STS));
|
|
printk("\tbmr: 0x%08x\n", inl(DE4X5_BMR));
|
|
printk("\timr: 0x%08x\n", inl(DE4X5_IMR));
|
|
printk("\tomr: 0x%08x\n", inl(DE4X5_OMR));
|
|
printk("\tsisr: 0x%08x\n", inl(DE4X5_SISR));
|
|
printk("\tsicr: 0x%08x\n", inl(DE4X5_SICR));
|
|
printk("\tstrr: 0x%08x\n", inl(DE4X5_STRR));
|
|
printk("\tsigr: 0x%08x\n", inl(DE4X5_SIGR));
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
** Initialize the DE4X5 operating conditions. NB: a chip problem with the
|
|
** DC21140 requires using perfect filtering mode for that chip. Since I can't
|
|
** see why I'd want > 14 multicast addresses, I have changed all chips to use
|
|
** the perfect filtering mode. Keep the DMA burst length at 8: there seems
|
|
** to be data corruption problems if it is larger (UDP errors seen from a
|
|
** ttcp source).
|
|
*/
|
|
static int
|
|
de4x5_init(struct net_device *dev)
|
|
{
|
|
/* Lock out other processes whilst setting up the hardware */
|
|
netif_stop_queue(dev);
|
|
|
|
de4x5_sw_reset(dev);
|
|
|
|
/* Autoconfigure the connected port */
|
|
autoconf_media(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
de4x5_sw_reset(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int i, j, status = 0;
|
|
s32 bmr, omr;
|
|
|
|
/* Select the MII or SRL port now and RESET the MAC */
|
|
if (!lp->useSROM) {
|
|
if (lp->phy[lp->active].id != 0) {
|
|
lp->infoblock_csr6 = OMR_SDP | OMR_PS | OMR_HBD;
|
|
} else {
|
|
lp->infoblock_csr6 = OMR_SDP | OMR_TTM;
|
|
}
|
|
de4x5_switch_mac_port(dev);
|
|
}
|
|
|
|
/*
|
|
** Set the programmable burst length to 8 longwords for all the DC21140
|
|
** Fasternet chips and 4 longwords for all others: DMA errors result
|
|
** without these values. Cache align 16 long.
|
|
*/
|
|
bmr = (lp->chipset==DC21140 ? PBL_8 : PBL_4) | DESC_SKIP_LEN | DE4X5_CACHE_ALIGN;
|
|
bmr |= ((lp->chipset & ~0x00ff)==DC2114x ? BMR_RML : 0);
|
|
outl(bmr, DE4X5_BMR);
|
|
|
|
omr = inl(DE4X5_OMR) & ~OMR_PR; /* Turn off promiscuous mode */
|
|
if (lp->chipset == DC21140) {
|
|
omr |= (OMR_SDP | OMR_SB);
|
|
}
|
|
lp->setup_f = PERFECT;
|
|
outl(lp->dma_rings, DE4X5_RRBA);
|
|
outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
|
|
DE4X5_TRBA);
|
|
|
|
lp->rx_new = lp->rx_old = 0;
|
|
lp->tx_new = lp->tx_old = 0;
|
|
|
|
for (i = 0; i < lp->rxRingSize; i++) {
|
|
lp->rx_ring[i].status = cpu_to_le32(R_OWN);
|
|
}
|
|
|
|
for (i = 0; i < lp->txRingSize; i++) {
|
|
lp->tx_ring[i].status = cpu_to_le32(0);
|
|
}
|
|
|
|
barrier();
|
|
|
|
/* Build the setup frame depending on filtering mode */
|
|
SetMulticastFilter(dev);
|
|
|
|
load_packet(dev, lp->setup_frame, PERFECT_F|TD_SET|SETUP_FRAME_LEN, (struct sk_buff *)1);
|
|
outl(omr|OMR_ST, DE4X5_OMR);
|
|
|
|
/* Poll for setup frame completion (adapter interrupts are disabled now) */
|
|
|
|
for (j=0, i=0;(i<500) && (j==0);i++) { /* Upto 500ms delay */
|
|
mdelay(1);
|
|
if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1;
|
|
}
|
|
outl(omr, DE4X5_OMR); /* Stop everything! */
|
|
|
|
if (j == 0) {
|
|
printk("%s: Setup frame timed out, status %08x\n", dev->name,
|
|
inl(DE4X5_STS));
|
|
status = -EIO;
|
|
}
|
|
|
|
lp->tx_new = (++lp->tx_new) % lp->txRingSize;
|
|
lp->tx_old = lp->tx_new;
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
** Writes a socket buffer address to the next available transmit descriptor.
|
|
*/
|
|
static int
|
|
de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int status = NETDEV_TX_OK;
|
|
u_long flags = 0;
|
|
|
|
netif_stop_queue(dev);
|
|
if (!lp->tx_enable) { /* Cannot send for now */
|
|
return NETDEV_TX_LOCKED;
|
|
}
|
|
|
|
/*
|
|
** Clean out the TX ring asynchronously to interrupts - sometimes the
|
|
** interrupts are lost by delayed descriptor status updates relative to
|
|
** the irq assertion, especially with a busy PCI bus.
|
|
*/
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
de4x5_tx(dev);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
|
|
/* Test if cache is already locked - requeue skb if so */
|
|
if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt)
|
|
return NETDEV_TX_LOCKED;
|
|
|
|
/* Transmit descriptor ring full or stale skb */
|
|
if (netif_queue_stopped(dev) || (u_long) lp->tx_skb[lp->tx_new] > 1) {
|
|
if (lp->interrupt) {
|
|
de4x5_putb_cache(dev, skb); /* Requeue the buffer */
|
|
} else {
|
|
de4x5_put_cache(dev, skb);
|
|
}
|
|
if (de4x5_debug & DEBUG_TX) {
|
|
printk("%s: transmit busy, lost media or stale skb found:\n STS:%08x\n tbusy:%d\n IMR:%08x\n OMR:%08x\n Stale skb: %s\n",dev->name, inl(DE4X5_STS), netif_queue_stopped(dev), inl(DE4X5_IMR), inl(DE4X5_OMR), ((u_long) lp->tx_skb[lp->tx_new] > 1) ? "YES" : "NO");
|
|
}
|
|
} else if (skb->len > 0) {
|
|
/* If we already have stuff queued locally, use that first */
|
|
if (!skb_queue_empty(&lp->cache.queue) && !lp->interrupt) {
|
|
de4x5_put_cache(dev, skb);
|
|
skb = de4x5_get_cache(dev);
|
|
}
|
|
|
|
while (skb && !netif_queue_stopped(dev) &&
|
|
(u_long) lp->tx_skb[lp->tx_new] <= 1) {
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
netif_stop_queue(dev);
|
|
load_packet(dev, skb->data, TD_IC | TD_LS | TD_FS | skb->len, skb);
|
|
lp->stats.tx_bytes += skb->len;
|
|
outl(POLL_DEMAND, DE4X5_TPD);/* Start the TX */
|
|
|
|
lp->tx_new = (++lp->tx_new) % lp->txRingSize;
|
|
dev->trans_start = jiffies;
|
|
|
|
if (TX_BUFFS_AVAIL) {
|
|
netif_start_queue(dev); /* Another pkt may be queued */
|
|
}
|
|
skb = de4x5_get_cache(dev);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
}
|
|
if (skb) de4x5_putb_cache(dev, skb);
|
|
}
|
|
|
|
lp->cache.lock = 0;
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
** The DE4X5 interrupt handler.
|
|
**
|
|
** I/O Read/Writes through intermediate PCI bridges are never 'posted',
|
|
** so that the asserted interrupt always has some real data to work with -
|
|
** if these I/O accesses are ever changed to memory accesses, ensure the
|
|
** STS write is read immediately to complete the transaction if the adapter
|
|
** is not on bus 0. Lost interrupts can still occur when the PCI bus load
|
|
** is high and descriptor status bits cannot be set before the associated
|
|
** interrupt is asserted and this routine entered.
|
|
*/
|
|
static irqreturn_t
|
|
de4x5_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct de4x5_private *lp;
|
|
s32 imr, omr, sts, limit;
|
|
u_long iobase;
|
|
unsigned int handled = 0;
|
|
|
|
lp = netdev_priv(dev);
|
|
spin_lock(&lp->lock);
|
|
iobase = dev->base_addr;
|
|
|
|
DISABLE_IRQs; /* Ensure non re-entrancy */
|
|
|
|
if (test_and_set_bit(MASK_INTERRUPTS, (void*) &lp->interrupt))
|
|
printk("%s: Re-entering the interrupt handler.\n", dev->name);
|
|
|
|
synchronize_irq(dev->irq);
|
|
|
|
for (limit=0; limit<8; limit++) {
|
|
sts = inl(DE4X5_STS); /* Read IRQ status */
|
|
outl(sts, DE4X5_STS); /* Reset the board interrupts */
|
|
|
|
if (!(sts & lp->irq_mask)) break;/* All done */
|
|
handled = 1;
|
|
|
|
if (sts & (STS_RI | STS_RU)) /* Rx interrupt (packet[s] arrived) */
|
|
de4x5_rx(dev);
|
|
|
|
if (sts & (STS_TI | STS_TU)) /* Tx interrupt (packet sent) */
|
|
de4x5_tx(dev);
|
|
|
|
if (sts & STS_LNF) { /* TP Link has failed */
|
|
lp->irq_mask &= ~IMR_LFM;
|
|
}
|
|
|
|
if (sts & STS_UNF) { /* Transmit underrun */
|
|
de4x5_txur(dev);
|
|
}
|
|
|
|
if (sts & STS_SE) { /* Bus Error */
|
|
STOP_DE4X5;
|
|
printk("%s: Fatal bus error occurred, sts=%#8x, device stopped.\n",
|
|
dev->name, sts);
|
|
spin_unlock(&lp->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
/* Load the TX ring with any locally stored packets */
|
|
if (!test_and_set_bit(0, (void *)&lp->cache.lock)) {
|
|
while (!skb_queue_empty(&lp->cache.queue) && !netif_queue_stopped(dev) && lp->tx_enable) {
|
|
de4x5_queue_pkt(de4x5_get_cache(dev), dev);
|
|
}
|
|
lp->cache.lock = 0;
|
|
}
|
|
|
|
lp->interrupt = UNMASK_INTERRUPTS;
|
|
ENABLE_IRQs;
|
|
spin_unlock(&lp->lock);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static int
|
|
de4x5_rx(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int entry;
|
|
s32 status;
|
|
|
|
for (entry=lp->rx_new; (s32)le32_to_cpu(lp->rx_ring[entry].status)>=0;
|
|
entry=lp->rx_new) {
|
|
status = (s32)le32_to_cpu(lp->rx_ring[entry].status);
|
|
|
|
if (lp->rx_ovf) {
|
|
if (inl(DE4X5_MFC) & MFC_FOCM) {
|
|
de4x5_rx_ovfc(dev);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (status & RD_FS) { /* Remember the start of frame */
|
|
lp->rx_old = entry;
|
|
}
|
|
|
|
if (status & RD_LS) { /* Valid frame status */
|
|
if (lp->tx_enable) lp->linkOK++;
|
|
if (status & RD_ES) { /* There was an error. */
|
|
lp->stats.rx_errors++; /* Update the error stats. */
|
|
if (status & (RD_RF | RD_TL)) lp->stats.rx_frame_errors++;
|
|
if (status & RD_CE) lp->stats.rx_crc_errors++;
|
|
if (status & RD_OF) lp->stats.rx_fifo_errors++;
|
|
if (status & RD_TL) lp->stats.rx_length_errors++;
|
|
if (status & RD_RF) lp->pktStats.rx_runt_frames++;
|
|
if (status & RD_CS) lp->pktStats.rx_collision++;
|
|
if (status & RD_DB) lp->pktStats.rx_dribble++;
|
|
if (status & RD_OF) lp->pktStats.rx_overflow++;
|
|
} else { /* A valid frame received */
|
|
struct sk_buff *skb;
|
|
short pkt_len = (short)(le32_to_cpu(lp->rx_ring[entry].status)
|
|
>> 16) - 4;
|
|
|
|
if ((skb = de4x5_alloc_rx_buff(dev, entry, pkt_len)) == NULL) {
|
|
printk("%s: Insufficient memory; nuking packet.\n",
|
|
dev->name);
|
|
lp->stats.rx_dropped++;
|
|
} else {
|
|
de4x5_dbg_rx(skb, pkt_len);
|
|
|
|
/* Push up the protocol stack */
|
|
skb->protocol=eth_type_trans(skb,dev);
|
|
de4x5_local_stats(dev, skb->data, pkt_len);
|
|
netif_rx(skb);
|
|
|
|
/* Update stats */
|
|
lp->stats.rx_packets++;
|
|
lp->stats.rx_bytes += pkt_len;
|
|
}
|
|
}
|
|
|
|
/* Change buffer ownership for this frame, back to the adapter */
|
|
for (;lp->rx_old!=entry;lp->rx_old=(++lp->rx_old)%lp->rxRingSize) {
|
|
lp->rx_ring[lp->rx_old].status = cpu_to_le32(R_OWN);
|
|
barrier();
|
|
}
|
|
lp->rx_ring[entry].status = cpu_to_le32(R_OWN);
|
|
barrier();
|
|
}
|
|
|
|
/*
|
|
** Update entry information
|
|
*/
|
|
lp->rx_new = (++lp->rx_new) % lp->rxRingSize;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void
|
|
de4x5_free_tx_buff(struct de4x5_private *lp, int entry)
|
|
{
|
|
dma_unmap_single(lp->gendev, le32_to_cpu(lp->tx_ring[entry].buf),
|
|
le32_to_cpu(lp->tx_ring[entry].des1) & TD_TBS1,
|
|
DMA_TO_DEVICE);
|
|
if ((u_long) lp->tx_skb[entry] > 1)
|
|
dev_kfree_skb_irq(lp->tx_skb[entry]);
|
|
lp->tx_skb[entry] = NULL;
|
|
}
|
|
|
|
/*
|
|
** Buffer sent - check for TX buffer errors.
|
|
*/
|
|
static int
|
|
de4x5_tx(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int entry;
|
|
s32 status;
|
|
|
|
for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) {
|
|
status = (s32)le32_to_cpu(lp->tx_ring[entry].status);
|
|
if (status < 0) { /* Buffer not sent yet */
|
|
break;
|
|
} else if (status != 0x7fffffff) { /* Not setup frame */
|
|
if (status & TD_ES) { /* An error happened */
|
|
lp->stats.tx_errors++;
|
|
if (status & TD_NC) lp->stats.tx_carrier_errors++;
|
|
if (status & TD_LC) lp->stats.tx_window_errors++;
|
|
if (status & TD_UF) lp->stats.tx_fifo_errors++;
|
|
if (status & TD_EC) lp->pktStats.excessive_collisions++;
|
|
if (status & TD_DE) lp->stats.tx_aborted_errors++;
|
|
|
|
if (TX_PKT_PENDING) {
|
|
outl(POLL_DEMAND, DE4X5_TPD);/* Restart a stalled TX */
|
|
}
|
|
} else { /* Packet sent */
|
|
lp->stats.tx_packets++;
|
|
if (lp->tx_enable) lp->linkOK++;
|
|
}
|
|
/* Update the collision counter */
|
|
lp->stats.collisions += ((status & TD_EC) ? 16 :
|
|
((status & TD_CC) >> 3));
|
|
|
|
/* Free the buffer. */
|
|
if (lp->tx_skb[entry] != NULL)
|
|
de4x5_free_tx_buff(lp, entry);
|
|
}
|
|
|
|
/* Update all the pointers */
|
|
lp->tx_old = (++lp->tx_old) % lp->txRingSize;
|
|
}
|
|
|
|
/* Any resources available? */
|
|
if (TX_BUFFS_AVAIL && netif_queue_stopped(dev)) {
|
|
if (lp->interrupt)
|
|
netif_wake_queue(dev);
|
|
else
|
|
netif_start_queue(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
de4x5_ast(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int next_tick = DE4X5_AUTOSENSE_MS;
|
|
int dt;
|
|
|
|
if (lp->useSROM)
|
|
next_tick = srom_autoconf(dev);
|
|
else if (lp->chipset == DC21140)
|
|
next_tick = dc21140m_autoconf(dev);
|
|
else if (lp->chipset == DC21041)
|
|
next_tick = dc21041_autoconf(dev);
|
|
else if (lp->chipset == DC21040)
|
|
next_tick = dc21040_autoconf(dev);
|
|
lp->linkOK = 0;
|
|
|
|
dt = (next_tick * HZ) / 1000;
|
|
|
|
if (!dt)
|
|
dt = 1;
|
|
|
|
mod_timer(&lp->timer, jiffies + dt);
|
|
}
|
|
|
|
static int
|
|
de4x5_txur(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int omr;
|
|
|
|
omr = inl(DE4X5_OMR);
|
|
if (!(omr & OMR_SF) || (lp->chipset==DC21041) || (lp->chipset==DC21040)) {
|
|
omr &= ~(OMR_ST|OMR_SR);
|
|
outl(omr, DE4X5_OMR);
|
|
while (inl(DE4X5_STS) & STS_TS);
|
|
if ((omr & OMR_TR) < OMR_TR) {
|
|
omr += 0x4000;
|
|
} else {
|
|
omr |= OMR_SF;
|
|
}
|
|
outl(omr | OMR_ST | OMR_SR, DE4X5_OMR);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
de4x5_rx_ovfc(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int omr;
|
|
|
|
omr = inl(DE4X5_OMR);
|
|
outl(omr & ~OMR_SR, DE4X5_OMR);
|
|
while (inl(DE4X5_STS) & STS_RS);
|
|
|
|
for (; (s32)le32_to_cpu(lp->rx_ring[lp->rx_new].status)>=0;) {
|
|
lp->rx_ring[lp->rx_new].status = cpu_to_le32(R_OWN);
|
|
lp->rx_new = (++lp->rx_new % lp->rxRingSize);
|
|
}
|
|
|
|
outl(omr, DE4X5_OMR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
de4x5_close(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
s32 imr, omr;
|
|
|
|
disable_ast(dev);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (de4x5_debug & DEBUG_CLOSE) {
|
|
printk("%s: Shutting down ethercard, status was %8.8x.\n",
|
|
dev->name, inl(DE4X5_STS));
|
|
}
|
|
|
|
/*
|
|
** We stop the DE4X5 here... mask interrupts and stop TX & RX
|
|
*/
|
|
DISABLE_IRQs;
|
|
STOP_DE4X5;
|
|
|
|
/* Free the associated irq */
|
|
free_irq(dev->irq, dev);
|
|
lp->state = CLOSED;
|
|
|
|
/* Free any socket buffers */
|
|
de4x5_free_rx_buffs(dev);
|
|
de4x5_free_tx_buffs(dev);
|
|
|
|
/* Put the adapter to sleep to save power */
|
|
yawn(dev, SLEEP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device_stats *
|
|
de4x5_get_stats(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
|
|
lp->stats.rx_missed_errors = (int)(inl(DE4X5_MFC) & (MFC_OVFL | MFC_CNTR));
|
|
|
|
return &lp->stats;
|
|
}
|
|
|
|
static void
|
|
de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int i;
|
|
|
|
for (i=1; i<DE4X5_PKT_STAT_SZ-1; i++) {
|
|
if (pkt_len < (i*DE4X5_PKT_BIN_SZ)) {
|
|
lp->pktStats.bins[i]++;
|
|
i = DE4X5_PKT_STAT_SZ;
|
|
}
|
|
}
|
|
if (buf[0] & 0x01) { /* Multicast/Broadcast */
|
|
if ((*(s32 *)&buf[0] == -1) && (*(s16 *)&buf[4] == -1)) {
|
|
lp->pktStats.broadcast++;
|
|
} else {
|
|
lp->pktStats.multicast++;
|
|
}
|
|
} else if ((*(s32 *)&buf[0] == *(s32 *)&dev->dev_addr[0]) &&
|
|
(*(s16 *)&buf[4] == *(s16 *)&dev->dev_addr[4])) {
|
|
lp->pktStats.unicast++;
|
|
}
|
|
|
|
lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */
|
|
if (lp->pktStats.bins[0] == 0) { /* Reset counters */
|
|
memset((char *)&lp->pktStats, 0, sizeof(lp->pktStats));
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Removes the TD_IC flag from previous descriptor to improve TX performance.
|
|
** If the flag is changed on a descriptor that is being read by the hardware,
|
|
** I assume PCI transaction ordering will mean you are either successful or
|
|
** just miss asserting the change to the hardware. Anyway you're messing with
|
|
** a descriptor you don't own, but this shouldn't kill the chip provided
|
|
** the descriptor register is read only to the hardware.
|
|
*/
|
|
static void
|
|
load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int entry = (lp->tx_new ? lp->tx_new-1 : lp->txRingSize-1);
|
|
dma_addr_t buf_dma = dma_map_single(lp->gendev, buf, flags & TD_TBS1, DMA_TO_DEVICE);
|
|
|
|
lp->tx_ring[lp->tx_new].buf = cpu_to_le32(buf_dma);
|
|
lp->tx_ring[lp->tx_new].des1 &= cpu_to_le32(TD_TER);
|
|
lp->tx_ring[lp->tx_new].des1 |= cpu_to_le32(flags);
|
|
lp->tx_skb[lp->tx_new] = skb;
|
|
lp->tx_ring[entry].des1 &= cpu_to_le32(~TD_IC);
|
|
barrier();
|
|
|
|
lp->tx_ring[lp->tx_new].status = cpu_to_le32(T_OWN);
|
|
barrier();
|
|
}
|
|
|
|
/*
|
|
** Set or clear the multicast filter for this adaptor.
|
|
*/
|
|
static void
|
|
set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
|
|
/* First, double check that the adapter is open */
|
|
if (lp->state == OPEN) {
|
|
if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
|
|
u32 omr;
|
|
omr = inl(DE4X5_OMR);
|
|
omr |= OMR_PR;
|
|
outl(omr, DE4X5_OMR);
|
|
} else {
|
|
SetMulticastFilter(dev);
|
|
load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
|
|
SETUP_FRAME_LEN, (struct sk_buff *)1);
|
|
|
|
lp->tx_new = (++lp->tx_new) % lp->txRingSize;
|
|
outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */
|
|
dev->trans_start = jiffies;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
** Calculate the hash code and update the logical address filter
|
|
** from a list of ethernet multicast addresses.
|
|
** Little endian crc one liner from Matt Thomas, DEC.
|
|
*/
|
|
static void
|
|
SetMulticastFilter(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
struct dev_mc_list *dmi=dev->mc_list;
|
|
u_long iobase = dev->base_addr;
|
|
int i, j, bit, byte;
|
|
u16 hashcode;
|
|
u32 omr, crc;
|
|
char *pa;
|
|
unsigned char *addrs;
|
|
|
|
omr = inl(DE4X5_OMR);
|
|
omr &= ~(OMR_PR | OMR_PM);
|
|
pa = build_setup_frame(dev, ALL); /* Build the basic frame */
|
|
|
|
if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 14)) {
|
|
omr |= OMR_PM; /* Pass all multicasts */
|
|
} else if (lp->setup_f == HASH_PERF) { /* Hash Filtering */
|
|
for (i=0;i<dev->mc_count;i++) { /* for each address in the list */
|
|
addrs=dmi->dmi_addr;
|
|
dmi=dmi->next;
|
|
if ((*addrs & 0x01) == 1) { /* multicast address? */
|
|
crc = ether_crc_le(ETH_ALEN, addrs);
|
|
hashcode = crc & HASH_BITS; /* hashcode is 9 LSb of CRC */
|
|
|
|
byte = hashcode >> 3; /* bit[3-8] -> byte in filter */
|
|
bit = 1 << (hashcode & 0x07);/* bit[0-2] -> bit in byte */
|
|
|
|
byte <<= 1; /* calc offset into setup frame */
|
|
if (byte & 0x02) {
|
|
byte -= 1;
|
|
}
|
|
lp->setup_frame[byte] |= bit;
|
|
}
|
|
}
|
|
} else { /* Perfect filtering */
|
|
for (j=0; j<dev->mc_count; j++) {
|
|
addrs=dmi->dmi_addr;
|
|
dmi=dmi->next;
|
|
for (i=0; i<ETH_ALEN; i++) {
|
|
*(pa + (i&1)) = *addrs++;
|
|
if (i & 0x01) pa += 4;
|
|
}
|
|
}
|
|
}
|
|
outl(omr, DE4X5_OMR);
|
|
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_EISA
|
|
|
|
static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST;
|
|
|
|
static int __init de4x5_eisa_probe (struct device *gendev)
|
|
{
|
|
struct eisa_device *edev;
|
|
u_long iobase;
|
|
u_char irq, regval;
|
|
u_short vendor;
|
|
u32 cfid;
|
|
int status, device;
|
|
struct net_device *dev;
|
|
struct de4x5_private *lp;
|
|
|
|
edev = to_eisa_device (gendev);
|
|
iobase = edev->base_addr;
|
|
|
|
if (!request_region (iobase, DE4X5_EISA_TOTAL_SIZE, "de4x5"))
|
|
return -EBUSY;
|
|
|
|
if (!request_region (iobase + DE4X5_EISA_IO_PORTS,
|
|
DE4X5_EISA_TOTAL_SIZE, "de4x5")) {
|
|
status = -EBUSY;
|
|
goto release_reg_1;
|
|
}
|
|
|
|
if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) {
|
|
status = -ENOMEM;
|
|
goto release_reg_2;
|
|
}
|
|
lp = netdev_priv(dev);
|
|
|
|
cfid = (u32) inl(PCI_CFID);
|
|
lp->cfrv = (u_short) inl(PCI_CFRV);
|
|
device = (cfid >> 8) & 0x00ffff00;
|
|
vendor = (u_short) cfid;
|
|
|
|
/* Read the EISA Configuration Registers */
|
|
regval = inb(EISA_REG0) & (ER0_INTL | ER0_INTT);
|
|
#ifdef CONFIG_ALPHA
|
|
/* Looks like the Jensen firmware (rev 2.2) doesn't really
|
|
* care about the EISA configuration, and thus doesn't
|
|
* configure the PLX bridge properly. Oh well... Simply mimic
|
|
* the EISA config file to sort it out. */
|
|
|
|
/* EISA REG1: Assert DecChip 21040 HW Reset */
|
|
outb (ER1_IAM | 1, EISA_REG1);
|
|
mdelay (1);
|
|
|
|
/* EISA REG1: Deassert DecChip 21040 HW Reset */
|
|
outb (ER1_IAM, EISA_REG1);
|
|
mdelay (1);
|
|
|
|
/* EISA REG3: R/W Burst Transfer Enable */
|
|
outb (ER3_BWE | ER3_BRE, EISA_REG3);
|
|
|
|
/* 32_bit slave/master, Preempt Time=23 bclks, Unlatched Interrupt */
|
|
outb (ER0_BSW | ER0_BMW | ER0_EPT | regval, EISA_REG0);
|
|
#endif
|
|
irq = de4x5_irq[(regval >> 1) & 0x03];
|
|
|
|
if (is_DC2114x) {
|
|
device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
|
|
}
|
|
lp->chipset = device;
|
|
lp->bus = EISA;
|
|
|
|
/* Write the PCI Configuration Registers */
|
|
outl(PCI_COMMAND_IO | PCI_COMMAND_MASTER, PCI_CFCS);
|
|
outl(0x00006000, PCI_CFLT);
|
|
outl(iobase, PCI_CBIO);
|
|
|
|
DevicePresent(dev, EISA_APROM);
|
|
|
|
dev->irq = irq;
|
|
|
|
if (!(status = de4x5_hw_init (dev, iobase, gendev))) {
|
|
return 0;
|
|
}
|
|
|
|
free_netdev (dev);
|
|
release_reg_2:
|
|
release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE);
|
|
release_reg_1:
|
|
release_region (iobase, DE4X5_EISA_TOTAL_SIZE);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int __devexit de4x5_eisa_remove (struct device *device)
|
|
{
|
|
struct net_device *dev;
|
|
u_long iobase;
|
|
|
|
dev = dev_get_drvdata(device);
|
|
iobase = dev->base_addr;
|
|
|
|
unregister_netdev (dev);
|
|
free_netdev (dev);
|
|
release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE);
|
|
release_region (iobase, DE4X5_EISA_TOTAL_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct eisa_device_id de4x5_eisa_ids[] = {
|
|
{ "DEC4250", 0 }, /* 0 is the board name index... */
|
|
{ "" }
|
|
};
|
|
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
|
|
|
|
static struct eisa_driver de4x5_eisa_driver = {
|
|
.id_table = de4x5_eisa_ids,
|
|
.driver = {
|
|
.name = "de4x5",
|
|
.probe = de4x5_eisa_probe,
|
|
.remove = __devexit_p (de4x5_eisa_remove),
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI
|
|
|
|
/*
|
|
** This function searches the current bus (which is >0) for a DECchip with an
|
|
** SROM, so that in multiport cards that have one SROM shared between multiple
|
|
** DECchips, we can find the base SROM irrespective of the BIOS scan direction.
|
|
** For single port cards this is a time waster...
|
|
*/
|
|
static void __devinit
|
|
srom_search(struct net_device *dev, struct pci_dev *pdev)
|
|
{
|
|
u_char pb;
|
|
u_short vendor, status;
|
|
u_int irq = 0, device;
|
|
u_long iobase = 0; /* Clear upper 32 bits in Alphas */
|
|
int i, j;
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
struct list_head *walk;
|
|
|
|
list_for_each(walk, &pdev->bus_list) {
|
|
struct pci_dev *this_dev = pci_dev_b(walk);
|
|
|
|
/* Skip the pci_bus list entry */
|
|
if (list_entry(walk, struct pci_bus, devices) == pdev->bus) continue;
|
|
|
|
vendor = this_dev->vendor;
|
|
device = this_dev->device << 8;
|
|
if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x)) continue;
|
|
|
|
/* Get the chip configuration revision register */
|
|
pb = this_dev->bus->number;
|
|
|
|
/* Set the device number information */
|
|
lp->device = PCI_SLOT(this_dev->devfn);
|
|
lp->bus_num = pb;
|
|
|
|
/* Set the chipset information */
|
|
if (is_DC2114x) {
|
|
device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK
|
|
? DC21142 : DC21143);
|
|
}
|
|
lp->chipset = device;
|
|
|
|
/* Get the board I/O address (64 bits on sparc64) */
|
|
iobase = pci_resource_start(this_dev, 0);
|
|
|
|
/* Fetch the IRQ to be used */
|
|
irq = this_dev->irq;
|
|
if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) continue;
|
|
|
|
/* Check if I/O accesses are enabled */
|
|
pci_read_config_word(this_dev, PCI_COMMAND, &status);
|
|
if (!(status & PCI_COMMAND_IO)) continue;
|
|
|
|
/* Search for a valid SROM attached to this DECchip */
|
|
DevicePresent(dev, DE4X5_APROM);
|
|
for (j=0, i=0; i<ETH_ALEN; i++) {
|
|
j += (u_char) *((u_char *)&lp->srom + SROM_HWADD + i);
|
|
}
|
|
if (j != 0 && j != 6 * 0xff) {
|
|
last.chipset = device;
|
|
last.bus = pb;
|
|
last.irq = irq;
|
|
for (i=0; i<ETH_ALEN; i++) {
|
|
last.addr[i] = (u_char)*((u_char *)&lp->srom + SROM_HWADD + i);
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** PCI bus I/O device probe
|
|
** NB: PCI I/O accesses and Bus Mastering are enabled by the PCI BIOS, not
|
|
** the driver. Some PCI BIOS's, pre V2.1, need the slot + features to be
|
|
** enabled by the user first in the set up utility. Hence we just check for
|
|
** enabled features and silently ignore the card if they're not.
|
|
**
|
|
** STOP PRESS: Some BIOS's __require__ the driver to enable the bus mastering
|
|
** bit. Here, check for I/O accesses and then set BM. If you put the card in
|
|
** a non BM slot, you're on your own (and complain to the PC vendor that your
|
|
** PC doesn't conform to the PCI standard)!
|
|
**
|
|
** This function is only compatible with the *latest* 2.1.x kernels. For 2.0.x
|
|
** kernels use the V0.535[n] drivers.
|
|
*/
|
|
|
|
static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
u_char pb, pbus = 0, dev_num, dnum = 0, timer;
|
|
u_short vendor, status;
|
|
u_int irq = 0, device;
|
|
u_long iobase = 0; /* Clear upper 32 bits in Alphas */
|
|
int error;
|
|
struct net_device *dev;
|
|
struct de4x5_private *lp;
|
|
|
|
dev_num = PCI_SLOT(pdev->devfn);
|
|
pb = pdev->bus->number;
|
|
|
|
if (io) { /* probe a single PCI device */
|
|
pbus = (u_short)(io >> 8);
|
|
dnum = (u_short)(io & 0xff);
|
|
if ((pbus != pb) || (dnum != dev_num))
|
|
return -ENODEV;
|
|
}
|
|
|
|
vendor = pdev->vendor;
|
|
device = pdev->device << 8;
|
|
if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x))
|
|
return -ENODEV;
|
|
|
|
/* Ok, the device seems to be for us. */
|
|
if ((error = pci_enable_device (pdev)))
|
|
return error;
|
|
|
|
if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) {
|
|
error = -ENOMEM;
|
|
goto disable_dev;
|
|
}
|
|
|
|
lp = netdev_priv(dev);
|
|
lp->bus = PCI;
|
|
lp->bus_num = 0;
|
|
|
|
/* Search for an SROM on this bus */
|
|
if (lp->bus_num != pb) {
|
|
lp->bus_num = pb;
|
|
srom_search(dev, pdev);
|
|
}
|
|
|
|
/* Get the chip configuration revision register */
|
|
lp->cfrv = pdev->revision;
|
|
|
|
/* Set the device number information */
|
|
lp->device = dev_num;
|
|
lp->bus_num = pb;
|
|
|
|
/* Set the chipset information */
|
|
if (is_DC2114x) {
|
|
device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
|
|
}
|
|
lp->chipset = device;
|
|
|
|
/* Get the board I/O address (64 bits on sparc64) */
|
|
iobase = pci_resource_start(pdev, 0);
|
|
|
|
/* Fetch the IRQ to be used */
|
|
irq = pdev->irq;
|
|
if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) {
|
|
error = -ENODEV;
|
|
goto free_dev;
|
|
}
|
|
|
|
/* Check if I/O accesses and Bus Mastering are enabled */
|
|
pci_read_config_word(pdev, PCI_COMMAND, &status);
|
|
#ifdef __powerpc__
|
|
if (!(status & PCI_COMMAND_IO)) {
|
|
status |= PCI_COMMAND_IO;
|
|
pci_write_config_word(pdev, PCI_COMMAND, status);
|
|
pci_read_config_word(pdev, PCI_COMMAND, &status);
|
|
}
|
|
#endif /* __powerpc__ */
|
|
if (!(status & PCI_COMMAND_IO)) {
|
|
error = -ENODEV;
|
|
goto free_dev;
|
|
}
|
|
|
|
if (!(status & PCI_COMMAND_MASTER)) {
|
|
status |= PCI_COMMAND_MASTER;
|
|
pci_write_config_word(pdev, PCI_COMMAND, status);
|
|
pci_read_config_word(pdev, PCI_COMMAND, &status);
|
|
}
|
|
if (!(status & PCI_COMMAND_MASTER)) {
|
|
error = -ENODEV;
|
|
goto free_dev;
|
|
}
|
|
|
|
/* Check the latency timer for values >= 0x60 */
|
|
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &timer);
|
|
if (timer < 0x60) {
|
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x60);
|
|
}
|
|
|
|
DevicePresent(dev, DE4X5_APROM);
|
|
|
|
if (!request_region (iobase, DE4X5_PCI_TOTAL_SIZE, "de4x5")) {
|
|
error = -EBUSY;
|
|
goto free_dev;
|
|
}
|
|
|
|
dev->irq = irq;
|
|
|
|
if ((error = de4x5_hw_init(dev, iobase, &pdev->dev))) {
|
|
goto release;
|
|
}
|
|
|
|
return 0;
|
|
|
|
release:
|
|
release_region (iobase, DE4X5_PCI_TOTAL_SIZE);
|
|
free_dev:
|
|
free_netdev (dev);
|
|
disable_dev:
|
|
pci_disable_device (pdev);
|
|
return error;
|
|
}
|
|
|
|
static void __devexit de4x5_pci_remove (struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev;
|
|
u_long iobase;
|
|
|
|
dev = dev_get_drvdata(&pdev->dev);
|
|
iobase = dev->base_addr;
|
|
|
|
unregister_netdev (dev);
|
|
free_netdev (dev);
|
|
release_region (iobase, DE4X5_PCI_TOTAL_SIZE);
|
|
pci_disable_device (pdev);
|
|
}
|
|
|
|
static struct pci_device_id de4x5_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
|
|
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
|
|
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
|
|
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver de4x5_pci_driver = {
|
|
.name = "de4x5",
|
|
.id_table = de4x5_pci_tbl,
|
|
.probe = de4x5_pci_probe,
|
|
.remove = __devexit_p (de4x5_pci_remove),
|
|
};
|
|
|
|
#endif
|
|
|
|
/*
|
|
** Auto configure the media here rather than setting the port at compile
|
|
** time. This routine is called by de4x5_init() and when a loss of media is
|
|
** detected (excessive collisions, loss of carrier, no carrier or link fail
|
|
** [TP] or no recent receive activity) to check whether the user has been
|
|
** sneaky and changed the port on us.
|
|
*/
|
|
static int
|
|
autoconf_media(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
|
|
disable_ast(dev);
|
|
|
|
lp->c_media = AUTO; /* Bogus last media */
|
|
inl(DE4X5_MFC); /* Zero the lost frames counter */
|
|
lp->media = INIT;
|
|
lp->tcount = 0;
|
|
|
|
de4x5_ast(dev);
|
|
|
|
return lp->media;
|
|
}
|
|
|
|
/*
|
|
** Autoconfigure the media when using the DC21040. AUI cannot be distinguished
|
|
** from BNC as the port has a jumper to set thick or thin wire. When set for
|
|
** BNC, the BNC port will indicate activity if it's not terminated correctly.
|
|
** The only way to test for that is to place a loopback packet onto the
|
|
** network and watch for errors. Since we're messing with the interrupt mask
|
|
** register, disable the board interrupts and do not allow any more packets to
|
|
** be queued to the hardware. Re-enable everything only when the media is
|
|
** found.
|
|
** I may have to "age out" locally queued packets so that the higher layer
|
|
** timeouts don't effectively duplicate packets on the network.
|
|
*/
|
|
static int
|
|
dc21040_autoconf(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int next_tick = DE4X5_AUTOSENSE_MS;
|
|
s32 imr;
|
|
|
|
switch (lp->media) {
|
|
case INIT:
|
|
DISABLE_IRQs;
|
|
lp->tx_enable = false;
|
|
lp->timeout = -1;
|
|
de4x5_save_skbs(dev);
|
|
if ((lp->autosense == AUTO) || (lp->autosense == TP)) {
|
|
lp->media = TP;
|
|
} else if ((lp->autosense == BNC) || (lp->autosense == AUI) || (lp->autosense == BNC_AUI)) {
|
|
lp->media = BNC_AUI;
|
|
} else if (lp->autosense == EXT_SIA) {
|
|
lp->media = EXT_SIA;
|
|
} else {
|
|
lp->media = NC;
|
|
}
|
|
lp->local_state = 0;
|
|
next_tick = dc21040_autoconf(dev);
|
|
break;
|
|
|
|
case TP:
|
|
next_tick = dc21040_state(dev, 0x8f01, 0xffff, 0x0000, 3000, BNC_AUI,
|
|
TP_SUSPECT, test_tp);
|
|
break;
|
|
|
|
case TP_SUSPECT:
|
|
next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21040_autoconf);
|
|
break;
|
|
|
|
case BNC:
|
|
case AUI:
|
|
case BNC_AUI:
|
|
next_tick = dc21040_state(dev, 0x8f09, 0x0705, 0x0006, 3000, EXT_SIA,
|
|
BNC_AUI_SUSPECT, ping_media);
|
|
break;
|
|
|
|
case BNC_AUI_SUSPECT:
|
|
next_tick = de4x5_suspect_state(dev, 1000, BNC_AUI, ping_media, dc21040_autoconf);
|
|
break;
|
|
|
|
case EXT_SIA:
|
|
next_tick = dc21040_state(dev, 0x3041, 0x0000, 0x0006, 3000,
|
|
NC, EXT_SIA_SUSPECT, ping_media);
|
|
break;
|
|
|
|
case EXT_SIA_SUSPECT:
|
|
next_tick = de4x5_suspect_state(dev, 1000, EXT_SIA, ping_media, dc21040_autoconf);
|
|
break;
|
|
|
|
case NC:
|
|
/* default to TP for all */
|
|
reset_init_sia(dev, 0x8f01, 0xffff, 0x0000);
|
|
if (lp->media != lp->c_media) {
|
|
de4x5_dbg_media(dev);
|
|
lp->c_media = lp->media;
|
|
}
|
|
lp->media = INIT;
|
|
lp->tx_enable = false;
|
|
break;
|
|
}
|
|
|
|
return next_tick;
|
|
}
|
|
|
|
static int
|
|
dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout,
|
|
int next_state, int suspect_state,
|
|
int (*fn)(struct net_device *, int))
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int next_tick = DE4X5_AUTOSENSE_MS;
|
|
int linkBad;
|
|
|
|
switch (lp->local_state) {
|
|
case 0:
|
|
reset_init_sia(dev, csr13, csr14, csr15);
|
|
lp->local_state++;
|
|
next_tick = 500;
|
|
break;
|
|
|
|
case 1:
|
|
if (!lp->tx_enable) {
|
|
linkBad = fn(dev, timeout);
|
|
if (linkBad < 0) {
|
|
next_tick = linkBad & ~TIMER_CB;
|
|
} else {
|
|
if (linkBad && (lp->autosense == AUTO)) {
|
|
lp->local_state = 0;
|
|
lp->media = next_state;
|
|
} else {
|
|
de4x5_init_connection(dev);
|
|
}
|
|
}
|
|
} else if (!lp->linkOK && (lp->autosense == AUTO)) {
|
|
lp->media = suspect_state;
|
|
next_tick = 3000;
|
|
}
|
|
break;
|
|
}
|
|
|
|
return next_tick;
|
|
}
|
|
|
|
static int
|
|
de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state,
|
|
int (*fn)(struct net_device *, int),
|
|
int (*asfn)(struct net_device *))
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int next_tick = DE4X5_AUTOSENSE_MS;
|
|
int linkBad;
|
|
|
|
switch (lp->local_state) {
|
|
case 1:
|
|
if (lp->linkOK) {
|
|
lp->media = prev_state;
|
|
} else {
|
|
lp->local_state++;
|
|
next_tick = asfn(dev);
|
|
}
|
|
break;
|
|
|
|
case 2:
|
|
linkBad = fn(dev, timeout);
|
|
if (linkBad < 0) {
|
|
next_tick = linkBad & ~TIMER_CB;
|
|
} else if (!linkBad) {
|
|
lp->local_state--;
|
|
lp->media = prev_state;
|
|
} else {
|
|
lp->media = INIT;
|
|
lp->tcount++;
|
|
}
|
|
}
|
|
|
|
return next_tick;
|
|
}
|
|
|
|
/*
|
|
** Autoconfigure the media when using the DC21041. AUI needs to be tested
|
|
** before BNC, because the BNC port will indicate activity if it's not
|
|
** terminated correctly. The only way to test for that is to place a loopback
|
|
** packet onto the network and watch for errors. Since we're messing with
|
|
** the interrupt mask register, disable the board interrupts and do not allow
|
|
** any more packets to be queued to the hardware. Re-enable everything only
|
|
** when the media is found.
|
|
*/
|
|
static int
|
|
dc21041_autoconf(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
s32 sts, irqs, irq_mask, imr, omr;
|
|
int next_tick = DE4X5_AUTOSENSE_MS;
|
|
|
|
switch (lp->media) {
|
|
case INIT:
|
|
DISABLE_IRQs;
|
|
lp->tx_enable = false;
|
|
lp->timeout = -1;
|
|
de4x5_save_skbs(dev); /* Save non transmitted skb's */
|
|
if ((lp->autosense == AUTO) || (lp->autosense == TP_NW)) {
|
|
lp->media = TP; /* On chip auto negotiation is broken */
|
|
} else if (lp->autosense == TP) {
|
|
lp->media = TP;
|
|
} else if (lp->autosense == BNC) {
|
|
lp->media = BNC;
|
|
} else if (lp->autosense == AUI) {
|
|
lp->media = AUI;
|
|
} else {
|
|
lp->media = NC;
|
|
}
|
|
lp->local_state = 0;
|
|
next_tick = dc21041_autoconf(dev);
|
|
break;
|
|
|
|
case TP_NW:
|
|
if (lp->timeout < 0) {
|
|
omr = inl(DE4X5_OMR);/* Set up full duplex for the autonegotiate */
|
|
outl(omr | OMR_FDX, DE4X5_OMR);
|
|
}
|
|
irqs = STS_LNF | STS_LNP;
|
|
irq_mask = IMR_LFM | IMR_LPM;
|
|
sts = test_media(dev, irqs, irq_mask, 0xef01, 0xffff, 0x0008, 2400);
|
|
if (sts < 0) {
|
|
next_tick = sts & ~TIMER_CB;
|
|
} else {
|
|
if (sts & STS_LNP) {
|
|
lp->media = ANS;
|
|
} else {
|
|
lp->media = AUI;
|
|
}
|
|
next_tick = dc21041_autoconf(dev);
|
|
}
|
|
break;
|
|
|
|
case ANS:
|
|
if (!lp->tx_enable) {
|
|
irqs = STS_LNP;
|
|
irq_mask = IMR_LPM;
|
|
sts = test_ans(dev, irqs, irq_mask, 3000);
|
|
if (sts < 0) {
|
|
next_tick = sts & ~TIMER_CB;
|
|
} else {
|
|
if (!(sts & STS_LNP) && (lp->autosense == AUTO)) {
|
|
lp->media = TP;
|
|
next_tick = dc21041_autoconf(dev);
|
|
} else {
|
|
lp->local_state = 1;
|
|
de4x5_init_connection(dev);
|
|
}
|
|
}
|
|
} else if (!lp->linkOK && (lp->autosense == AUTO)) {
|
|
lp->media = ANS_SUSPECT;
|
|
next_tick = 3000;
|
|
}
|
|
break;
|
|
|
|
case ANS_SUSPECT:
|
|
next_tick = de4x5_suspect_state(dev, 1000, ANS, test_tp, dc21041_autoconf);
|
|
break;
|
|
|
|
case TP:
|
|
if (!lp->tx_enable) {
|
|
if (lp->timeout < 0) {
|
|
omr = inl(DE4X5_OMR); /* Set up half duplex for TP */
|
|
outl(omr & ~OMR_FDX, DE4X5_OMR);
|
|
}
|
|
irqs = STS_LNF | STS_LNP;
|
|
irq_mask = IMR_LFM | IMR_LPM;
|
|
sts = test_media(dev,irqs, irq_mask, 0xef01, 0xff3f, 0x0008, 2400);
|
|
if (sts < 0) {
|
|
next_tick = sts & ~TIMER_CB;
|
|
} else {
|
|
if (!(sts & STS_LNP) && (lp->autosense == AUTO)) {
|
|
if (inl(DE4X5_SISR) & SISR_NRA) {
|
|
lp->media = AUI; /* Non selected port activity */
|
|
} else {
|
|
lp->media = BNC;
|
|
}
|
|
next_tick = dc21041_autoconf(dev);
|
|
} else {
|
|
lp->local_state = 1;
|
|
de4x5_init_connection(dev);
|
|
}
|
|
}
|
|
} else if (!lp->linkOK && (lp->autosense == AUTO)) {
|
|
lp->media = TP_SUSPECT;
|
|
next_tick = 3000;
|
|
}
|
|
break;
|
|
|
|
case TP_SUSPECT:
|
|
next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21041_autoconf);
|
|
break;
|
|
|
|
case AUI:
|
|
if (!lp->tx_enable) {
|
|
if (lp->timeout < 0) {
|
|
omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */
|
|
outl(omr & ~OMR_FDX, DE4X5_OMR);
|
|
}
|
|
irqs = 0;
|
|
irq_mask = 0;
|
|
sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x000e, 1000);
|
|
if (sts < 0) {
|
|
next_tick = sts & ~TIMER_CB;
|
|
} else {
|
|
if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) {
|
|
lp->media = BNC;
|
|
next_tick = dc21041_autoconf(dev);
|
|
} else {
|
|
lp->local_state = 1;
|
|
de4x5_init_connection(dev);
|
|
}
|
|
}
|
|
} else if (!lp->linkOK && (lp->autosense == AUTO)) {
|
|
lp->media = AUI_SUSPECT;
|
|
next_tick = 3000;
|
|
}
|
|
break;
|
|
|
|
case AUI_SUSPECT:
|
|
next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc21041_autoconf);
|
|
break;
|
|
|
|
case BNC:
|
|
switch (lp->local_state) {
|
|
case 0:
|
|
if (lp->timeout < 0) {
|
|
omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */
|
|
outl(omr & ~OMR_FDX, DE4X5_OMR);
|
|
}
|
|
irqs = 0;
|
|
irq_mask = 0;
|
|
sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x0006, 1000);
|
|
if (sts < 0) {
|
|
next_tick = sts & ~TIMER_CB;
|
|
} else {
|
|
lp->local_state++; /* Ensure media connected */
|
|
next_tick = dc21041_autoconf(dev);
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
if (!lp->tx_enable) {
|
|
if ((sts = ping_media(dev, 3000)) < 0) {
|
|
next_tick = sts & ~TIMER_CB;
|
|
} else {
|
|
if (sts) {
|
|
lp->local_state = 0;
|
|
lp->media = NC;
|
|
} else {
|
|
de4x5_init_connection(dev);
|
|
}
|
|
}
|
|
} else if (!lp->linkOK && (lp->autosense == AUTO)) {
|
|
lp->media = BNC_SUSPECT;
|
|
next_tick = 3000;
|
|
}
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case BNC_SUSPECT:
|
|
next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc21041_autoconf);
|
|
break;
|
|
|
|
case NC:
|
|
omr = inl(DE4X5_OMR); /* Set up full duplex for the autonegotiate */
|
|
outl(omr | OMR_FDX, DE4X5_OMR);
|
|
reset_init_sia(dev, 0xef01, 0xffff, 0x0008);/* Initialise the SIA */
|
|
if (lp->media != lp->c_media) {
|
|
de4x5_dbg_media(dev);
|
|
lp->c_media = lp->media;
|
|
}
|
|
lp->media = INIT;
|
|
lp->tx_enable = false;
|
|
break;
|
|
}
|
|
|
|
return next_tick;
|
|
}
|
|
|
|
/*
|
|
** Some autonegotiation chips are broken in that they do not return the
|
|
** acknowledge bit (anlpa & MII_ANLPA_ACK) in the link partner advertisement
|
|
** register, except at the first power up negotiation.
|
|
*/
|
|
static int
|
|
dc21140m_autoconf(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int ana, anlpa, cap, cr, slnk, sr;
|
|
int next_tick = DE4X5_AUTOSENSE_MS;
|
|
u_long imr, omr, iobase = dev->base_addr;
|
|
|
|
switch(lp->media) {
|
|
case INIT:
|
|
if (lp->timeout < 0) {
|
|
DISABLE_IRQs;
|
|
lp->tx_enable = false;
|
|
lp->linkOK = 0;
|
|
de4x5_save_skbs(dev); /* Save non transmitted skb's */
|
|
}
|
|
if ((next_tick = de4x5_reset_phy(dev)) < 0) {
|
|
next_tick &= ~TIMER_CB;
|
|
} else {
|
|
if (lp->useSROM) {
|
|
if (srom_map_media(dev) < 0) {
|
|
lp->tcount++;
|
|
return next_tick;
|
|
}
|
|
srom_exec(dev, lp->phy[lp->active].gep);
|
|
if (lp->infoblock_media == ANS) {
|
|
ana = lp->phy[lp->active].ana | MII_ANA_CSMA;
|
|
mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
|
|
}
|
|
} else {
|
|
lp->tmp = MII_SR_ASSC; /* Fake out the MII speed set */
|
|
SET_10Mb;
|
|
if (lp->autosense == _100Mb) {
|
|
lp->media = _100Mb;
|
|
} else if (lp->autosense == _10Mb) {
|
|
lp->media = _10Mb;
|
|
} else if ((lp->autosense == AUTO) &&
|
|
((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
|
|
ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
|
|
ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
|
|
mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
|
|
lp->media = ANS;
|
|
} else if (lp->autosense == AUTO) {
|
|
lp->media = SPD_DET;
|
|
} else if (is_spd_100(dev) && is_100_up(dev)) {
|
|
lp->media = _100Mb;
|
|
} else {
|
|
lp->media = NC;
|
|
}
|
|
}
|
|
lp->local_state = 0;
|
|
next_tick = dc21140m_autoconf(dev);
|
|
}
|
|
break;
|
|
|
|
case ANS:
|
|
switch (lp->local_state) {
|
|
case 0:
|
|
if (lp->timeout < 0) {
|
|
mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
|
|
}
|
|
cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500);
|
|
if (cr < 0) {
|
|
next_tick = cr & ~TIMER_CB;
|
|
} else {
|
|
if (cr) {
|
|
lp->local_state = 0;
|
|
lp->media = SPD_DET;
|
|
} else {
|
|
lp->local_state++;
|
|
}
|
|
next_tick = dc21140m_autoconf(dev);
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000)) < 0) {
|
|
next_tick = sr & ~TIMER_CB;
|
|
} else {
|
|
lp->media = SPD_DET;
|
|
lp->local_state = 0;
|
|
if (sr) { /* Success! */
|
|
lp->tmp = MII_SR_ASSC;
|
|
anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
|
|
ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
|
|
if (!(anlpa & MII_ANLPA_RF) &&
|
|
(cap = anlpa & MII_ANLPA_TAF & ana)) {
|
|
if (cap & MII_ANA_100M) {
|
|
lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0;
|
|
lp->media = _100Mb;
|
|
} else if (cap & MII_ANA_10M) {
|
|
lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0;
|
|
|
|
lp->media = _10Mb;
|
|
}
|
|
}
|
|
} /* Auto Negotiation failed to finish */
|
|
next_tick = dc21140m_autoconf(dev);
|
|
} /* Auto Negotiation failed to start */
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case SPD_DET: /* Choose 10Mb/s or 100Mb/s */
|
|
if (lp->timeout < 0) {
|
|
lp->tmp = (lp->phy[lp->active].id ? MII_SR_LKS :
|
|
(~gep_rd(dev) & GEP_LNP));
|
|
SET_100Mb_PDET;
|
|
}
|
|
if ((slnk = test_for_100Mb(dev, 6500)) < 0) {
|
|
next_tick = slnk & ~TIMER_CB;
|
|
} else {
|
|
if (is_spd_100(dev) && is_100_up(dev)) {
|
|
lp->media = _100Mb;
|
|
} else if ((!is_spd_100(dev) && (is_10_up(dev) & lp->tmp))) {
|
|
lp->media = _10Mb;
|
|
} else {
|
|
lp->media = NC;
|
|
}
|
|
next_tick = dc21140m_autoconf(dev);
|
|
}
|
|
break;
|
|
|
|
case _100Mb: /* Set 100Mb/s */
|
|
next_tick = 3000;
|
|
if (!lp->tx_enable) {
|
|
SET_100Mb;
|
|
de4x5_init_connection(dev);
|
|
} else {
|
|
if (!lp->linkOK && (lp->autosense == AUTO)) {
|
|
if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) {
|
|
lp->media = INIT;
|
|
lp->tcount++;
|
|
next_tick = DE4X5_AUTOSENSE_MS;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case BNC:
|
|
case AUI:
|
|
case _10Mb: /* Set 10Mb/s */
|
|
next_tick = 3000;
|
|
if (!lp->tx_enable) {
|
|
SET_10Mb;
|
|
de4x5_init_connection(dev);
|
|
} else {
|
|
if (!lp->linkOK && (lp->autosense == AUTO)) {
|
|
if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) {
|
|
lp->media = INIT;
|
|
lp->tcount++;
|
|
next_tick = DE4X5_AUTOSENSE_MS;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case NC:
|
|
if (lp->media != lp->c_media) {
|
|
de4x5_dbg_media(dev);
|
|
lp->c_media = lp->media;
|
|
}
|
|
lp->media = INIT;
|
|
lp->tx_enable = false;
|
|
break;
|
|
}
|
|
|
|
return next_tick;
|
|
}
|
|
|
|
/*
|
|
** This routine may be merged into dc21140m_autoconf() sometime as I'm
|
|
** changing how I figure out the media - but trying to keep it backwards
|
|
** compatible with the de500-xa and de500-aa.
|
|
** Whether it's BNC, AUI, SYM or MII is sorted out in the infoblock
|
|
** functions and set during de4x5_mac_port() and/or de4x5_reset_phy().
|
|
** This routine just has to figure out whether 10Mb/s or 100Mb/s is
|
|
** active.
|
|
** When autonegotiation is working, the ANS part searches the SROM for
|
|
** the highest common speed (TP) link that both can run and if that can
|
|
** be full duplex. That infoblock is executed and then the link speed set.
|
|
**
|
|
** Only _10Mb and _100Mb are tested here.
|
|
*/
|
|
static int
|
|
dc2114x_autoconf(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
s32 cr, anlpa, ana, cap, irqs, irq_mask, imr, omr, slnk, sr, sts;
|
|
int next_tick = DE4X5_AUTOSENSE_MS;
|
|
|
|
switch (lp->media) {
|
|
case INIT:
|
|
if (lp->timeout < 0) {
|
|
DISABLE_IRQs;
|
|
lp->tx_enable = false;
|
|
lp->linkOK = 0;
|
|
lp->timeout = -1;
|
|
de4x5_save_skbs(dev); /* Save non transmitted skb's */
|
|
if (lp->params.autosense & ~AUTO) {
|
|
srom_map_media(dev); /* Fixed media requested */
|
|
if (lp->media != lp->params.autosense) {
|
|
lp->tcount++;
|
|
lp->media = INIT;
|
|
return next_tick;
|
|
}
|
|
lp->media = INIT;
|
|
}
|
|
}
|
|
if ((next_tick = de4x5_reset_phy(dev)) < 0) {
|
|
next_tick &= ~TIMER_CB;
|
|
} else {
|
|
if (lp->autosense == _100Mb) {
|
|
lp->media = _100Mb;
|
|
} else if (lp->autosense == _10Mb) {
|
|
lp->media = _10Mb;
|
|
} else if (lp->autosense == TP) {
|
|
lp->media = TP;
|
|
} else if (lp->autosense == BNC) {
|
|
lp->media = BNC;
|
|
} else if (lp->autosense == AUI) {
|
|
lp->media = AUI;
|
|
} else {
|
|
lp->media = SPD_DET;
|
|
if ((lp->infoblock_media == ANS) &&
|
|
((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
|
|
ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
|
|
ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
|
|
mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
|
|
lp->media = ANS;
|
|
}
|
|
}
|
|
lp->local_state = 0;
|
|
next_tick = dc2114x_autoconf(dev);
|
|
}
|
|
break;
|
|
|
|
case ANS:
|
|
switch (lp->local_state) {
|
|
case 0:
|
|
if (lp->timeout < 0) {
|
|
mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
|
|
}
|
|
cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500);
|
|
if (cr < 0) {
|
|
next_tick = cr & ~TIMER_CB;
|
|
} else {
|
|
if (cr) {
|
|
lp->local_state = 0;
|
|
lp->media = SPD_DET;
|
|
} else {
|
|
lp->local_state++;
|
|
}
|
|
next_tick = dc2114x_autoconf(dev);
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
sr = test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000);
|
|
if (sr < 0) {
|
|
next_tick = sr & ~TIMER_CB;
|
|
} else {
|
|
lp->media = SPD_DET;
|
|
lp->local_state = 0;
|
|
if (sr) { /* Success! */
|
|
lp->tmp = MII_SR_ASSC;
|
|
anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
|
|
ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
|
|
if (!(anlpa & MII_ANLPA_RF) &&
|
|
(cap = anlpa & MII_ANLPA_TAF & ana)) {
|
|
if (cap & MII_ANA_100M) {
|
|
lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0;
|
|
lp->media = _100Mb;
|
|
} else if (cap & MII_ANA_10M) {
|
|
lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0;
|
|
lp->media = _10Mb;
|
|
}
|
|
}
|
|
} /* Auto Negotiation failed to finish */
|
|
next_tick = dc2114x_autoconf(dev);
|
|
} /* Auto Negotiation failed to start */
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case AUI:
|
|
if (!lp->tx_enable) {
|
|
if (lp->timeout < 0) {
|
|
omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */
|
|
outl(omr & ~OMR_FDX, DE4X5_OMR);
|
|
}
|
|
irqs = 0;
|
|
irq_mask = 0;
|
|
sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000);
|
|
if (sts < 0) {
|
|
next_tick = sts & ~TIMER_CB;
|
|
} else {
|
|
if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) {
|
|
lp->media = BNC;
|
|
next_tick = dc2114x_autoconf(dev);
|
|
} else {
|
|
lp->local_state = 1;
|
|
de4x5_init_connection(dev);
|
|
}
|
|
}
|
|
} else if (!lp->linkOK && (lp->autosense == AUTO)) {
|
|
lp->media = AUI_SUSPECT;
|
|
next_tick = 3000;
|
|
}
|
|
break;
|
|
|
|
case AUI_SUSPECT:
|
|
next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc2114x_autoconf);
|
|
break;
|
|
|
|
case BNC:
|
|
switch (lp->local_state) {
|
|
case 0:
|
|
if (lp->timeout < 0) {
|
|
omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */
|
|
outl(omr & ~OMR_FDX, DE4X5_OMR);
|
|
}
|
|
irqs = 0;
|
|
irq_mask = 0;
|
|
sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000);
|
|
if (sts < 0) {
|
|
next_tick = sts & ~TIMER_CB;
|
|
} else {
|
|
lp->local_state++; /* Ensure media connected */
|
|
next_tick = dc2114x_autoconf(dev);
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
if (!lp->tx_enable) {
|
|
if ((sts = ping_media(dev, 3000)) < 0) {
|
|
next_tick = sts & ~TIMER_CB;
|
|
} else {
|
|
if (sts) {
|
|
lp->local_state = 0;
|
|
lp->tcount++;
|
|
lp->media = INIT;
|
|
} else {
|
|
de4x5_init_connection(dev);
|
|
}
|
|
}
|
|
} else if (!lp->linkOK && (lp->autosense == AUTO)) {
|
|
lp->media = BNC_SUSPECT;
|
|
next_tick = 3000;
|
|
}
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case BNC_SUSPECT:
|
|
next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc2114x_autoconf);
|
|
break;
|
|
|
|
case SPD_DET: /* Choose 10Mb/s or 100Mb/s */
|
|
if (srom_map_media(dev) < 0) {
|
|
lp->tcount++;
|
|
lp->media = INIT;
|
|
return next_tick;
|
|
}
|
|
if (lp->media == _100Mb) {
|
|
if ((slnk = test_for_100Mb(dev, 6500)) < 0) {
|
|
lp->media = SPD_DET;
|
|
return (slnk & ~TIMER_CB);
|
|
}
|
|
} else {
|
|
if (wait_for_link(dev) < 0) {
|
|
lp->media = SPD_DET;
|
|
return PDET_LINK_WAIT;
|
|
}
|
|
}
|
|
if (lp->media == ANS) { /* Do MII parallel detection */
|
|
if (is_spd_100(dev)) {
|
|
lp->media = _100Mb;
|
|
} else {
|
|
lp->media = _10Mb;
|
|
}
|
|
next_tick = dc2114x_autoconf(dev);
|
|
} else if (((lp->media == _100Mb) && is_100_up(dev)) ||
|
|
(((lp->media == _10Mb) || (lp->media == TP) ||
|
|
(lp->media == BNC) || (lp->media == AUI)) &&
|
|
is_10_up(dev))) {
|
|
next_tick = dc2114x_autoconf(dev);
|
|
} else {
|
|
lp->tcount++;
|
|
lp->media = INIT;
|
|
}
|
|
break;
|
|
|
|
case _10Mb:
|
|
next_tick = 3000;
|
|
if (!lp->tx_enable) {
|
|
SET_10Mb;
|
|
de4x5_init_connection(dev);
|
|
} else {
|
|
if (!lp->linkOK && (lp->autosense == AUTO)) {
|
|
if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) {
|
|
lp->media = INIT;
|
|
lp->tcount++;
|
|
next_tick = DE4X5_AUTOSENSE_MS;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case _100Mb:
|
|
next_tick = 3000;
|
|
if (!lp->tx_enable) {
|
|
SET_100Mb;
|
|
de4x5_init_connection(dev);
|
|
} else {
|
|
if (!lp->linkOK && (lp->autosense == AUTO)) {
|
|
if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) {
|
|
lp->media = INIT;
|
|
lp->tcount++;
|
|
next_tick = DE4X5_AUTOSENSE_MS;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
default:
|
|
lp->tcount++;
|
|
printk("Huh?: media:%02x\n", lp->media);
|
|
lp->media = INIT;
|
|
break;
|
|
}
|
|
|
|
return next_tick;
|
|
}
|
|
|
|
static int
|
|
srom_autoconf(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
|
|
return lp->infoleaf_fn(dev);
|
|
}
|
|
|
|
/*
|
|
** This mapping keeps the original media codes and FDX flag unchanged.
|
|
** While it isn't strictly necessary, it helps me for the moment...
|
|
** The early return avoids a media state / SROM media space clash.
|
|
*/
|
|
static int
|
|
srom_map_media(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
|
|
lp->fdx = false;
|
|
if (lp->infoblock_media == lp->media)
|
|
return 0;
|
|
|
|
switch(lp->infoblock_media) {
|
|
case SROM_10BASETF:
|
|
if (!lp->params.fdx) return -1;
|
|
lp->fdx = true;
|
|
case SROM_10BASET:
|
|
if (lp->params.fdx && !lp->fdx) return -1;
|
|
if ((lp->chipset == DC21140) || ((lp->chipset & ~0x00ff) == DC2114x)) {
|
|
lp->media = _10Mb;
|
|
} else {
|
|
lp->media = TP;
|
|
}
|
|
break;
|
|
|
|
case SROM_10BASE2:
|
|
lp->media = BNC;
|
|
break;
|
|
|
|
case SROM_10BASE5:
|
|
lp->media = AUI;
|
|
break;
|
|
|
|
case SROM_100BASETF:
|
|
if (!lp->params.fdx) return -1;
|
|
lp->fdx = true;
|
|
case SROM_100BASET:
|
|
if (lp->params.fdx && !lp->fdx) return -1;
|
|
lp->media = _100Mb;
|
|
break;
|
|
|
|
case SROM_100BASET4:
|
|
lp->media = _100Mb;
|
|
break;
|
|
|
|
case SROM_100BASEFF:
|
|
if (!lp->params.fdx) return -1;
|
|
lp->fdx = true;
|
|
case SROM_100BASEF:
|
|
if (lp->params.fdx && !lp->fdx) return -1;
|
|
lp->media = _100Mb;
|
|
break;
|
|
|
|
case ANS:
|
|
lp->media = ANS;
|
|
lp->fdx = lp->params.fdx;
|
|
break;
|
|
|
|
default:
|
|
printk("%s: Bad media code [%d] detected in SROM!\n", dev->name,
|
|
lp->infoblock_media);
|
|
return -1;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
de4x5_init_connection(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
u_long flags = 0;
|
|
|
|
if (lp->media != lp->c_media) {
|
|
de4x5_dbg_media(dev);
|
|
lp->c_media = lp->media; /* Stop scrolling media messages */
|
|
}
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
de4x5_rst_desc_ring(dev);
|
|
de4x5_setup_intr(dev);
|
|
lp->tx_enable = true;
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
outl(POLL_DEMAND, DE4X5_TPD);
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** General PHY reset function. Some MII devices don't reset correctly
|
|
** since their MII address pins can float at voltages that are dependent
|
|
** on the signal pin use. Do a double reset to ensure a reset.
|
|
*/
|
|
static int
|
|
de4x5_reset_phy(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int next_tick = 0;
|
|
|
|
if ((lp->useSROM) || (lp->phy[lp->active].id)) {
|
|
if (lp->timeout < 0) {
|
|
if (lp->useSROM) {
|
|
if (lp->phy[lp->active].rst) {
|
|
srom_exec(dev, lp->phy[lp->active].rst);
|
|
srom_exec(dev, lp->phy[lp->active].rst);
|
|
} else if (lp->rst) { /* Type 5 infoblock reset */
|
|
srom_exec(dev, lp->rst);
|
|
srom_exec(dev, lp->rst);
|
|
}
|
|
} else {
|
|
PHY_HARD_RESET;
|
|
}
|
|
if (lp->useMII) {
|
|
mii_wr(MII_CR_RST, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
|
|
}
|
|
}
|
|
if (lp->useMII) {
|
|
next_tick = test_mii_reg(dev, MII_CR, MII_CR_RST, false, 500);
|
|
}
|
|
} else if (lp->chipset == DC21140) {
|
|
PHY_HARD_RESET;
|
|
}
|
|
|
|
return next_tick;
|
|
}
|
|
|
|
static int
|
|
test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
s32 sts, csr12;
|
|
|
|
if (lp->timeout < 0) {
|
|
lp->timeout = msec/100;
|
|
if (!lp->useSROM) { /* Already done if by SROM, else dc2104[01] */
|
|
reset_init_sia(dev, csr13, csr14, csr15);
|
|
}
|
|
|
|
/* set up the interrupt mask */
|
|
outl(irq_mask, DE4X5_IMR);
|
|
|
|
/* clear all pending interrupts */
|
|
sts = inl(DE4X5_STS);
|
|
outl(sts, DE4X5_STS);
|
|
|
|
/* clear csr12 NRA and SRA bits */
|
|
if ((lp->chipset == DC21041) || lp->useSROM) {
|
|
csr12 = inl(DE4X5_SISR);
|
|
outl(csr12, DE4X5_SISR);
|
|
}
|
|
}
|
|
|
|
sts = inl(DE4X5_STS) & ~TIMER_CB;
|
|
|
|
if (!(sts & irqs) && --lp->timeout) {
|
|
sts = 100 | TIMER_CB;
|
|
} else {
|
|
lp->timeout = -1;
|
|
}
|
|
|
|
return sts;
|
|
}
|
|
|
|
static int
|
|
test_tp(struct net_device *dev, s32 msec)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int sisr;
|
|
|
|
if (lp->timeout < 0) {
|
|
lp->timeout = msec/100;
|
|
}
|
|
|
|
sisr = (inl(DE4X5_SISR) & ~TIMER_CB) & (SISR_LKF | SISR_NCR);
|
|
|
|
if (sisr && --lp->timeout) {
|
|
sisr = 100 | TIMER_CB;
|
|
} else {
|
|
lp->timeout = -1;
|
|
}
|
|
|
|
return sisr;
|
|
}
|
|
|
|
/*
|
|
** Samples the 100Mb Link State Signal. The sample interval is important
|
|
** because too fast a rate can give erroneous results and confuse the
|
|
** speed sense algorithm.
|
|
*/
|
|
#define SAMPLE_INTERVAL 500 /* ms */
|
|
#define SAMPLE_DELAY 2000 /* ms */
|
|
static int
|
|
test_for_100Mb(struct net_device *dev, int msec)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int gep = 0, ret = ((lp->chipset & ~0x00ff)==DC2114x? -1 :GEP_SLNK);
|
|
|
|
if (lp->timeout < 0) {
|
|
if ((msec/SAMPLE_INTERVAL) <= 0) return 0;
|
|
if (msec > SAMPLE_DELAY) {
|
|
lp->timeout = (msec - SAMPLE_DELAY)/SAMPLE_INTERVAL;
|
|
gep = SAMPLE_DELAY | TIMER_CB;
|
|
return gep;
|
|
} else {
|
|
lp->timeout = msec/SAMPLE_INTERVAL;
|
|
}
|
|
}
|
|
|
|
if (lp->phy[lp->active].id || lp->useSROM) {
|
|
gep = is_100_up(dev) | is_spd_100(dev);
|
|
} else {
|
|
gep = (~gep_rd(dev) & (GEP_SLNK | GEP_LNP));
|
|
}
|
|
if (!(gep & ret) && --lp->timeout) {
|
|
gep = SAMPLE_INTERVAL | TIMER_CB;
|
|
} else {
|
|
lp->timeout = -1;
|
|
}
|
|
|
|
return gep;
|
|
}
|
|
|
|
static int
|
|
wait_for_link(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
|
|
if (lp->timeout < 0) {
|
|
lp->timeout = 1;
|
|
}
|
|
|
|
if (lp->timeout--) {
|
|
return TIMER_CB;
|
|
} else {
|
|
lp->timeout = -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
**
|
|
**
|
|
*/
|
|
static int
|
|
test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int test;
|
|
u_long iobase = dev->base_addr;
|
|
|
|
if (lp->timeout < 0) {
|
|
lp->timeout = msec/100;
|
|
}
|
|
|
|
reg = mii_rd((u_char)reg, lp->phy[lp->active].addr, DE4X5_MII) & mask;
|
|
test = (reg ^ (pol ? ~0 : 0)) & mask;
|
|
|
|
if (test && --lp->timeout) {
|
|
reg = 100 | TIMER_CB;
|
|
} else {
|
|
lp->timeout = -1;
|
|
}
|
|
|
|
return reg;
|
|
}
|
|
|
|
static int
|
|
is_spd_100(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int spd;
|
|
|
|
if (lp->useMII) {
|
|
spd = mii_rd(lp->phy[lp->active].spd.reg, lp->phy[lp->active].addr, DE4X5_MII);
|
|
spd = ~(spd ^ lp->phy[lp->active].spd.value);
|
|
spd &= lp->phy[lp->active].spd.mask;
|
|
} else if (!lp->useSROM) { /* de500-xa */
|
|
spd = ((~gep_rd(dev)) & GEP_SLNK);
|
|
} else {
|
|
if ((lp->ibn == 2) || !lp->asBitValid)
|
|
return ((lp->chipset == DC21143)?(~inl(DE4X5_SISR)&SISR_LS100):0);
|
|
|
|
spd = (lp->asBitValid & (lp->asPolarity ^ (gep_rd(dev) & lp->asBit))) |
|
|
(lp->linkOK & ~lp->asBitValid);
|
|
}
|
|
|
|
return spd;
|
|
}
|
|
|
|
static int
|
|
is_100_up(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
|
|
if (lp->useMII) {
|
|
/* Double read for sticky bits & temporary drops */
|
|
mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
|
|
return (mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS);
|
|
} else if (!lp->useSROM) { /* de500-xa */
|
|
return ((~gep_rd(dev)) & GEP_SLNK);
|
|
} else {
|
|
if ((lp->ibn == 2) || !lp->asBitValid)
|
|
return ((lp->chipset == DC21143)?(~inl(DE4X5_SISR)&SISR_LS100):0);
|
|
|
|
return ((lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) |
|
|
(lp->linkOK & ~lp->asBitValid));
|
|
}
|
|
}
|
|
|
|
static int
|
|
is_10_up(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
|
|
if (lp->useMII) {
|
|
/* Double read for sticky bits & temporary drops */
|
|
mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
|
|
return (mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS);
|
|
} else if (!lp->useSROM) { /* de500-xa */
|
|
return ((~gep_rd(dev)) & GEP_LNP);
|
|
} else {
|
|
if ((lp->ibn == 2) || !lp->asBitValid)
|
|
return (((lp->chipset & ~0x00ff) == DC2114x) ?
|
|
(~inl(DE4X5_SISR)&SISR_LS10):
|
|
0);
|
|
|
|
return ((lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) |
|
|
(lp->linkOK & ~lp->asBitValid));
|
|
}
|
|
}
|
|
|
|
static int
|
|
is_anc_capable(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
|
|
if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
|
|
return (mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII));
|
|
} else if ((lp->chipset & ~0x00ff) == DC2114x) {
|
|
return (inl(DE4X5_SISR) & SISR_LPN) >> 12;
|
|
} else {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
** Send a packet onto the media and watch for send errors that indicate the
|
|
** media is bad or unconnected.
|
|
*/
|
|
static int
|
|
ping_media(struct net_device *dev, int msec)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int sisr;
|
|
|
|
if (lp->timeout < 0) {
|
|
lp->timeout = msec/100;
|
|
|
|
lp->tmp = lp->tx_new; /* Remember the ring position */
|
|
load_packet(dev, lp->frame, TD_LS | TD_FS | sizeof(lp->frame), (struct sk_buff *)1);
|
|
lp->tx_new = (++lp->tx_new) % lp->txRingSize;
|
|
outl(POLL_DEMAND, DE4X5_TPD);
|
|
}
|
|
|
|
sisr = inl(DE4X5_SISR);
|
|
|
|
if ((!(sisr & SISR_NCR)) &&
|
|
((s32)le32_to_cpu(lp->tx_ring[lp->tmp].status) < 0) &&
|
|
(--lp->timeout)) {
|
|
sisr = 100 | TIMER_CB;
|
|
} else {
|
|
if ((!(sisr & SISR_NCR)) &&
|
|
!(le32_to_cpu(lp->tx_ring[lp->tmp].status) & (T_OWN | TD_ES)) &&
|
|
lp->timeout) {
|
|
sisr = 0;
|
|
} else {
|
|
sisr = 1;
|
|
}
|
|
lp->timeout = -1;
|
|
}
|
|
|
|
return sisr;
|
|
}
|
|
|
|
/*
|
|
** This function does 2 things: on Intels it kmalloc's another buffer to
|
|
** replace the one about to be passed up. On Alpha's it kmallocs a buffer
|
|
** into which the packet is copied.
|
|
*/
|
|
static struct sk_buff *
|
|
de4x5_alloc_rx_buff(struct net_device *dev, int index, int len)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
struct sk_buff *p;
|
|
|
|
#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
|
|
struct sk_buff *ret;
|
|
u_long i=0, tmp;
|
|
|
|
p = dev_alloc_skb(IEEE802_3_SZ + DE4X5_ALIGN + 2);
|
|
if (!p) return NULL;
|
|
|
|
tmp = virt_to_bus(p->data);
|
|
i = ((tmp + DE4X5_ALIGN) & ~DE4X5_ALIGN) - tmp;
|
|
skb_reserve(p, i);
|
|
lp->rx_ring[index].buf = cpu_to_le32(tmp + i);
|
|
|
|
ret = lp->rx_skb[index];
|
|
lp->rx_skb[index] = p;
|
|
|
|
if ((u_long) ret > 1) {
|
|
skb_put(ret, len);
|
|
}
|
|
|
|
return ret;
|
|
|
|
#else
|
|
if (lp->state != OPEN) return (struct sk_buff *)1; /* Fake out the open */
|
|
|
|
p = dev_alloc_skb(len + 2);
|
|
if (!p) return NULL;
|
|
|
|
skb_reserve(p, 2); /* Align */
|
|
if (index < lp->rx_old) { /* Wrapped buffer */
|
|
short tlen = (lp->rxRingSize - lp->rx_old) * RX_BUFF_SZ;
|
|
memcpy(skb_put(p,tlen),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,tlen);
|
|
memcpy(skb_put(p,len-tlen),lp->rx_bufs,len-tlen);
|
|
} else { /* Linear buffer */
|
|
memcpy(skb_put(p,len),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,len);
|
|
}
|
|
|
|
return p;
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
de4x5_free_rx_buffs(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int i;
|
|
|
|
for (i=0; i<lp->rxRingSize; i++) {
|
|
if ((u_long) lp->rx_skb[i] > 1) {
|
|
dev_kfree_skb(lp->rx_skb[i]);
|
|
}
|
|
lp->rx_ring[i].status = 0;
|
|
lp->rx_skb[i] = (struct sk_buff *)1; /* Dummy entry */
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
de4x5_free_tx_buffs(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int i;
|
|
|
|
for (i=0; i<lp->txRingSize; i++) {
|
|
if (lp->tx_skb[i])
|
|
de4x5_free_tx_buff(lp, i);
|
|
lp->tx_ring[i].status = 0;
|
|
}
|
|
|
|
/* Unload the locally queued packets */
|
|
__skb_queue_purge(&lp->cache.queue);
|
|
}
|
|
|
|
/*
|
|
** When a user pulls a connection, the DECchip can end up in a
|
|
** 'running - waiting for end of transmission' state. This means that we
|
|
** have to perform a chip soft reset to ensure that we can synchronize
|
|
** the hardware and software and make any media probes using a loopback
|
|
** packet meaningful.
|
|
*/
|
|
static void
|
|
de4x5_save_skbs(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
s32 omr;
|
|
|
|
if (!lp->cache.save_cnt) {
|
|
STOP_DE4X5;
|
|
de4x5_tx(dev); /* Flush any sent skb's */
|
|
de4x5_free_tx_buffs(dev);
|
|
de4x5_cache_state(dev, DE4X5_SAVE_STATE);
|
|
de4x5_sw_reset(dev);
|
|
de4x5_cache_state(dev, DE4X5_RESTORE_STATE);
|
|
lp->cache.save_cnt++;
|
|
START_DE4X5;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
de4x5_rst_desc_ring(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int i;
|
|
s32 omr;
|
|
|
|
if (lp->cache.save_cnt) {
|
|
STOP_DE4X5;
|
|
outl(lp->dma_rings, DE4X5_RRBA);
|
|
outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
|
|
DE4X5_TRBA);
|
|
|
|
lp->rx_new = lp->rx_old = 0;
|
|
lp->tx_new = lp->tx_old = 0;
|
|
|
|
for (i = 0; i < lp->rxRingSize; i++) {
|
|
lp->rx_ring[i].status = cpu_to_le32(R_OWN);
|
|
}
|
|
|
|
for (i = 0; i < lp->txRingSize; i++) {
|
|
lp->tx_ring[i].status = cpu_to_le32(0);
|
|
}
|
|
|
|
barrier();
|
|
lp->cache.save_cnt--;
|
|
START_DE4X5;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
de4x5_cache_state(struct net_device *dev, int flag)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
|
|
switch(flag) {
|
|
case DE4X5_SAVE_STATE:
|
|
lp->cache.csr0 = inl(DE4X5_BMR);
|
|
lp->cache.csr6 = (inl(DE4X5_OMR) & ~(OMR_ST | OMR_SR));
|
|
lp->cache.csr7 = inl(DE4X5_IMR);
|
|
break;
|
|
|
|
case DE4X5_RESTORE_STATE:
|
|
outl(lp->cache.csr0, DE4X5_BMR);
|
|
outl(lp->cache.csr6, DE4X5_OMR);
|
|
outl(lp->cache.csr7, DE4X5_IMR);
|
|
if (lp->chipset == DC21140) {
|
|
gep_wr(lp->cache.gepc, dev);
|
|
gep_wr(lp->cache.gep, dev);
|
|
} else {
|
|
reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14,
|
|
lp->cache.csr15);
|
|
}
|
|
break;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
de4x5_put_cache(struct net_device *dev, struct sk_buff *skb)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
|
|
__skb_queue_tail(&lp->cache.queue, skb);
|
|
}
|
|
|
|
static void
|
|
de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
|
|
__skb_queue_head(&lp->cache.queue, skb);
|
|
}
|
|
|
|
static struct sk_buff *
|
|
de4x5_get_cache(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
|
|
return __skb_dequeue(&lp->cache.queue);
|
|
}
|
|
|
|
/*
|
|
** Check the Auto Negotiation State. Return OK when a link pass interrupt
|
|
** is received and the auto-negotiation status is NWAY OK.
|
|
*/
|
|
static int
|
|
test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
s32 sts, ans;
|
|
|
|
if (lp->timeout < 0) {
|
|
lp->timeout = msec/100;
|
|
outl(irq_mask, DE4X5_IMR);
|
|
|
|
/* clear all pending interrupts */
|
|
sts = inl(DE4X5_STS);
|
|
outl(sts, DE4X5_STS);
|
|
}
|
|
|
|
ans = inl(DE4X5_SISR) & SISR_ANS;
|
|
sts = inl(DE4X5_STS) & ~TIMER_CB;
|
|
|
|
if (!(sts & irqs) && (ans ^ ANS_NWOK) && --lp->timeout) {
|
|
sts = 100 | TIMER_CB;
|
|
} else {
|
|
lp->timeout = -1;
|
|
}
|
|
|
|
return sts;
|
|
}
|
|
|
|
static void
|
|
de4x5_setup_intr(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
s32 imr, sts;
|
|
|
|
if (inl(DE4X5_OMR) & OMR_SR) { /* Only unmask if TX/RX is enabled */
|
|
imr = 0;
|
|
UNMASK_IRQs;
|
|
sts = inl(DE4X5_STS); /* Reset any pending (stale) interrupts */
|
|
outl(sts, DE4X5_STS);
|
|
ENABLE_IRQs;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
**
|
|
*/
|
|
static void
|
|
reset_init_sia(struct net_device *dev, s32 csr13, s32 csr14, s32 csr15)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
|
|
RESET_SIA;
|
|
if (lp->useSROM) {
|
|
if (lp->ibn == 3) {
|
|
srom_exec(dev, lp->phy[lp->active].rst);
|
|
srom_exec(dev, lp->phy[lp->active].gep);
|
|
outl(1, DE4X5_SICR);
|
|
return;
|
|
} else {
|
|
csr15 = lp->cache.csr15;
|
|
csr14 = lp->cache.csr14;
|
|
csr13 = lp->cache.csr13;
|
|
outl(csr15 | lp->cache.gepc, DE4X5_SIGR);
|
|
outl(csr15 | lp->cache.gep, DE4X5_SIGR);
|
|
}
|
|
} else {
|
|
outl(csr15, DE4X5_SIGR);
|
|
}
|
|
outl(csr14, DE4X5_STRR);
|
|
outl(csr13, DE4X5_SICR);
|
|
|
|
mdelay(10);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Create a loopback ethernet packet
|
|
*/
|
|
static void
|
|
create_packet(struct net_device *dev, char *frame, int len)
|
|
{
|
|
int i;
|
|
char *buf = frame;
|
|
|
|
for (i=0; i<ETH_ALEN; i++) { /* Use this source address */
|
|
*buf++ = dev->dev_addr[i];
|
|
}
|
|
for (i=0; i<ETH_ALEN; i++) { /* Use this destination address */
|
|
*buf++ = dev->dev_addr[i];
|
|
}
|
|
|
|
*buf++ = 0; /* Packet length (2 bytes) */
|
|
*buf++ = 1;
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Look for a particular board name in the EISA configuration space
|
|
*/
|
|
static int
|
|
EISA_signature(char *name, struct device *device)
|
|
{
|
|
int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures);
|
|
struct eisa_device *edev;
|
|
|
|
*name = '\0';
|
|
edev = to_eisa_device (device);
|
|
i = edev->id.driver_data;
|
|
|
|
if (i >= 0 && i < siglen) {
|
|
strcpy (name, de4x5_signatures[i]);
|
|
status = 1;
|
|
}
|
|
|
|
return status; /* return the device name string */
|
|
}
|
|
|
|
/*
|
|
** Look for a particular board name in the PCI configuration space
|
|
*/
|
|
static int
|
|
PCI_signature(char *name, struct de4x5_private *lp)
|
|
{
|
|
int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures);
|
|
|
|
if (lp->chipset == DC21040) {
|
|
strcpy(name, "DE434/5");
|
|
return status;
|
|
} else { /* Search for a DEC name in the SROM */
|
|
int tmp = *((char *)&lp->srom + 19) * 3;
|
|
strncpy(name, (char *)&lp->srom + 26 + tmp, 8);
|
|
}
|
|
name[8] = '\0';
|
|
for (i=0; i<siglen; i++) {
|
|
if (strstr(name,de4x5_signatures[i])!=NULL) break;
|
|
}
|
|
if (i == siglen) {
|
|
if (dec_only) {
|
|
*name = '\0';
|
|
} else { /* Use chip name to avoid confusion */
|
|
strcpy(name, (((lp->chipset == DC21040) ? "DC21040" :
|
|
((lp->chipset == DC21041) ? "DC21041" :
|
|
((lp->chipset == DC21140) ? "DC21140" :
|
|
((lp->chipset == DC21142) ? "DC21142" :
|
|
((lp->chipset == DC21143) ? "DC21143" : "UNKNOWN"
|
|
)))))));
|
|
}
|
|
if (lp->chipset != DC21041) {
|
|
lp->useSROM = true; /* card is not recognisably DEC */
|
|
}
|
|
} else if ((lp->chipset & ~0x00ff) == DC2114x) {
|
|
lp->useSROM = true;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
** Set up the Ethernet PROM counter to the start of the Ethernet address on
|
|
** the DC21040, else read the SROM for the other chips.
|
|
** The SROM may not be present in a multi-MAC card, so first read the
|
|
** MAC address and check for a bad address. If there is a bad one then exit
|
|
** immediately with the prior srom contents intact (the h/w address will
|
|
** be fixed up later).
|
|
*/
|
|
static void
|
|
DevicePresent(struct net_device *dev, u_long aprom_addr)
|
|
{
|
|
int i, j=0;
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
|
|
if (lp->chipset == DC21040) {
|
|
if (lp->bus == EISA) {
|
|
enet_addr_rst(aprom_addr); /* Reset Ethernet Address ROM Pointer */
|
|
} else {
|
|
outl(0, aprom_addr); /* Reset Ethernet Address ROM Pointer */
|
|
}
|
|
} else { /* Read new srom */
|
|
u_short tmp;
|
|
__le16 *p = (__le16 *)((char *)&lp->srom + SROM_HWADD);
|
|
for (i=0; i<(ETH_ALEN>>1); i++) {
|
|
tmp = srom_rd(aprom_addr, (SROM_HWADD>>1) + i);
|
|
j += tmp; /* for check for 0:0:0:0:0:0 or ff:ff:ff:ff:ff:ff */
|
|
*p = cpu_to_le16(tmp);
|
|
}
|
|
if (j == 0 || j == 3 * 0xffff) {
|
|
/* could get 0 only from all-0 and 3 * 0xffff only from all-1 */
|
|
return;
|
|
}
|
|
|
|
p = (__le16 *)&lp->srom;
|
|
for (i=0; i<(sizeof(struct de4x5_srom)>>1); i++) {
|
|
tmp = srom_rd(aprom_addr, i);
|
|
*p++ = cpu_to_le16(tmp);
|
|
}
|
|
de4x5_dbg_srom((struct de4x5_srom *)&lp->srom);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Since the write on the Enet PROM register doesn't seem to reset the PROM
|
|
** pointer correctly (at least on my DE425 EISA card), this routine should do
|
|
** it...from depca.c.
|
|
*/
|
|
static void
|
|
enet_addr_rst(u_long aprom_addr)
|
|
{
|
|
union {
|
|
struct {
|
|
u32 a;
|
|
u32 b;
|
|
} llsig;
|
|
char Sig[sizeof(u32) << 1];
|
|
} dev;
|
|
short sigLength=0;
|
|
s8 data;
|
|
int i, j;
|
|
|
|
dev.llsig.a = ETH_PROM_SIG;
|
|
dev.llsig.b = ETH_PROM_SIG;
|
|
sigLength = sizeof(u32) << 1;
|
|
|
|
for (i=0,j=0;j<sigLength && i<PROBE_LENGTH+sigLength-1;i++) {
|
|
data = inb(aprom_addr);
|
|
if (dev.Sig[j] == data) { /* track signature */
|
|
j++;
|
|
} else { /* lost signature; begin search again */
|
|
if (data == dev.Sig[0]) { /* rare case.... */
|
|
j=1;
|
|
} else {
|
|
j=0;
|
|
}
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** For the bad status case and no SROM, then add one to the previous
|
|
** address. However, need to add one backwards in case we have 0xff
|
|
** as one or more of the bytes. Only the last 3 bytes should be checked
|
|
** as the first three are invariant - assigned to an organisation.
|
|
*/
|
|
static int
|
|
get_hw_addr(struct net_device *dev)
|
|
{
|
|
u_long iobase = dev->base_addr;
|
|
int broken, i, k, tmp, status = 0;
|
|
u_short j,chksum;
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
|
|
broken = de4x5_bad_srom(lp);
|
|
|
|
for (i=0,k=0,j=0;j<3;j++) {
|
|
k <<= 1;
|
|
if (k > 0xffff) k-=0xffff;
|
|
|
|
if (lp->bus == PCI) {
|
|
if (lp->chipset == DC21040) {
|
|
while ((tmp = inl(DE4X5_APROM)) < 0);
|
|
k += (u_char) tmp;
|
|
dev->dev_addr[i++] = (u_char) tmp;
|
|
while ((tmp = inl(DE4X5_APROM)) < 0);
|
|
k += (u_short) (tmp << 8);
|
|
dev->dev_addr[i++] = (u_char) tmp;
|
|
} else if (!broken) {
|
|
dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++;
|
|
dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++;
|
|
} else if ((broken == SMC) || (broken == ACCTON)) {
|
|
dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++;
|
|
dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++;
|
|
}
|
|
} else {
|
|
k += (u_char) (tmp = inb(EISA_APROM));
|
|
dev->dev_addr[i++] = (u_char) tmp;
|
|
k += (u_short) ((tmp = inb(EISA_APROM)) << 8);
|
|
dev->dev_addr[i++] = (u_char) tmp;
|
|
}
|
|
|
|
if (k > 0xffff) k-=0xffff;
|
|
}
|
|
if (k == 0xffff) k=0;
|
|
|
|
if (lp->bus == PCI) {
|
|
if (lp->chipset == DC21040) {
|
|
while ((tmp = inl(DE4X5_APROM)) < 0);
|
|
chksum = (u_char) tmp;
|
|
while ((tmp = inl(DE4X5_APROM)) < 0);
|
|
chksum |= (u_short) (tmp << 8);
|
|
if ((k != chksum) && (dec_only)) status = -1;
|
|
}
|
|
} else {
|
|
chksum = (u_char) inb(EISA_APROM);
|
|
chksum |= (u_short) (inb(EISA_APROM) << 8);
|
|
if ((k != chksum) && (dec_only)) status = -1;
|
|
}
|
|
|
|
/* If possible, try to fix a broken card - SMC only so far */
|
|
srom_repair(dev, broken);
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
/*
|
|
** If the address starts with 00 a0, we have to bit-reverse
|
|
** each byte of the address.
|
|
*/
|
|
if ( machine_is(powermac) &&
|
|
(dev->dev_addr[0] == 0) &&
|
|
(dev->dev_addr[1] == 0xa0) )
|
|
{
|
|
for (i = 0; i < ETH_ALEN; ++i)
|
|
{
|
|
int x = dev->dev_addr[i];
|
|
x = ((x & 0xf) << 4) + ((x & 0xf0) >> 4);
|
|
x = ((x & 0x33) << 2) + ((x & 0xcc) >> 2);
|
|
dev->dev_addr[i] = ((x & 0x55) << 1) + ((x & 0xaa) >> 1);
|
|
}
|
|
}
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
/* Test for a bad enet address */
|
|
status = test_bad_enet(dev, status);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
** Test for enet addresses in the first 32 bytes. The built-in strncmp
|
|
** didn't seem to work here...?
|
|
*/
|
|
static int
|
|
de4x5_bad_srom(struct de4x5_private *lp)
|
|
{
|
|
int i, status = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(enet_det); i++) {
|
|
if (!de4x5_strncmp((char *)&lp->srom, (char *)&enet_det[i], 3) &&
|
|
!de4x5_strncmp((char *)&lp->srom+0x10, (char *)&enet_det[i], 3)) {
|
|
if (i == 0) {
|
|
status = SMC;
|
|
} else if (i == 1) {
|
|
status = ACCTON;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static int
|
|
de4x5_strncmp(char *a, char *b, int n)
|
|
{
|
|
int ret=0;
|
|
|
|
for (;n && !ret; n--) {
|
|
ret = *a++ - *b++;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
srom_repair(struct net_device *dev, int card)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
|
|
switch(card) {
|
|
case SMC:
|
|
memset((char *)&lp->srom, 0, sizeof(struct de4x5_srom));
|
|
memcpy(lp->srom.ieee_addr, (char *)dev->dev_addr, ETH_ALEN);
|
|
memcpy(lp->srom.info, (char *)&srom_repair_info[SMC-1], 100);
|
|
lp->useSROM = true;
|
|
break;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Assume that the irq's do not follow the PCI spec - this is seems
|
|
** to be true so far (2 for 2).
|
|
*/
|
|
static int
|
|
test_bad_enet(struct net_device *dev, int status)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int i, tmp;
|
|
|
|
for (tmp=0,i=0; i<ETH_ALEN; i++) tmp += (u_char)dev->dev_addr[i];
|
|
if ((tmp == 0) || (tmp == 0x5fa)) {
|
|
if ((lp->chipset == last.chipset) &&
|
|
(lp->bus_num == last.bus) && (lp->bus_num > 0)) {
|
|
for (i=0; i<ETH_ALEN; i++) dev->dev_addr[i] = last.addr[i];
|
|
for (i=ETH_ALEN-1; i>2; --i) {
|
|
dev->dev_addr[i] += 1;
|
|
if (dev->dev_addr[i] != 0) break;
|
|
}
|
|
for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i];
|
|
if (!an_exception(lp)) {
|
|
dev->irq = last.irq;
|
|
}
|
|
|
|
status = 0;
|
|
}
|
|
} else if (!status) {
|
|
last.chipset = lp->chipset;
|
|
last.bus = lp->bus_num;
|
|
last.irq = dev->irq;
|
|
for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i];
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
** List of board exceptions with correctly wired IRQs
|
|
*/
|
|
static int
|
|
an_exception(struct de4x5_private *lp)
|
|
{
|
|
if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) &&
|
|
(*(u_short *)lp->srom.sub_system_id == 0x95e0)) {
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
** SROM Read
|
|
*/
|
|
static short
|
|
srom_rd(u_long addr, u_char offset)
|
|
{
|
|
sendto_srom(SROM_RD | SROM_SR, addr);
|
|
|
|
srom_latch(SROM_RD | SROM_SR | DT_CS, addr);
|
|
srom_command(SROM_RD | SROM_SR | DT_IN | DT_CS, addr);
|
|
srom_address(SROM_RD | SROM_SR | DT_CS, addr, offset);
|
|
|
|
return srom_data(SROM_RD | SROM_SR | DT_CS, addr);
|
|
}
|
|
|
|
static void
|
|
srom_latch(u_int command, u_long addr)
|
|
{
|
|
sendto_srom(command, addr);
|
|
sendto_srom(command | DT_CLK, addr);
|
|
sendto_srom(command, addr);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
srom_command(u_int command, u_long addr)
|
|
{
|
|
srom_latch(command, addr);
|
|
srom_latch(command, addr);
|
|
srom_latch((command & 0x0000ff00) | DT_CS, addr);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
srom_address(u_int command, u_long addr, u_char offset)
|
|
{
|
|
int i, a;
|
|
|
|
a = offset << 2;
|
|
for (i=0; i<6; i++, a <<= 1) {
|
|
srom_latch(command | ((a & 0x80) ? DT_IN : 0), addr);
|
|
}
|
|
udelay(1);
|
|
|
|
i = (getfrom_srom(addr) >> 3) & 0x01;
|
|
|
|
return;
|
|
}
|
|
|
|
static short
|
|
srom_data(u_int command, u_long addr)
|
|
{
|
|
int i;
|
|
short word = 0;
|
|
s32 tmp;
|
|
|
|
for (i=0; i<16; i++) {
|
|
sendto_srom(command | DT_CLK, addr);
|
|
tmp = getfrom_srom(addr);
|
|
sendto_srom(command, addr);
|
|
|
|
word = (word << 1) | ((tmp >> 3) & 0x01);
|
|
}
|
|
|
|
sendto_srom(command & 0x0000ff00, addr);
|
|
|
|
return word;
|
|
}
|
|
|
|
/*
|
|
static void
|
|
srom_busy(u_int command, u_long addr)
|
|
{
|
|
sendto_srom((command & 0x0000ff00) | DT_CS, addr);
|
|
|
|
while (!((getfrom_srom(addr) >> 3) & 0x01)) {
|
|
mdelay(1);
|
|
}
|
|
|
|
sendto_srom(command & 0x0000ff00, addr);
|
|
|
|
return;
|
|
}
|
|
*/
|
|
|
|
static void
|
|
sendto_srom(u_int command, u_long addr)
|
|
{
|
|
outl(command, addr);
|
|
udelay(1);
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
getfrom_srom(u_long addr)
|
|
{
|
|
s32 tmp;
|
|
|
|
tmp = inl(addr);
|
|
udelay(1);
|
|
|
|
return tmp;
|
|
}
|
|
|
|
static int
|
|
srom_infoleaf_info(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int i, count;
|
|
u_char *p;
|
|
|
|
/* Find the infoleaf decoder function that matches this chipset */
|
|
for (i=0; i<INFOLEAF_SIZE; i++) {
|
|
if (lp->chipset == infoleaf_array[i].chipset) break;
|
|
}
|
|
if (i == INFOLEAF_SIZE) {
|
|
lp->useSROM = false;
|
|
printk("%s: Cannot find correct chipset for SROM decoding!\n",
|
|
dev->name);
|
|
return -ENXIO;
|
|
}
|
|
|
|
lp->infoleaf_fn = infoleaf_array[i].fn;
|
|
|
|
/* Find the information offset that this function should use */
|
|
count = *((u_char *)&lp->srom + 19);
|
|
p = (u_char *)&lp->srom + 26;
|
|
|
|
if (count > 1) {
|
|
for (i=count; i; --i, p+=3) {
|
|
if (lp->device == *p) break;
|
|
}
|
|
if (i == 0) {
|
|
lp->useSROM = false;
|
|
printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n",
|
|
dev->name, lp->device);
|
|
return -ENXIO;
|
|
}
|
|
}
|
|
|
|
lp->infoleaf_offset = get_unaligned_le16(p + 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
** This routine loads any type 1 or 3 MII info into the mii device
|
|
** struct and executes any type 5 code to reset PHY devices for this
|
|
** controller.
|
|
** The info for the MII devices will be valid since the index used
|
|
** will follow the discovery process from MII address 1-31 then 0.
|
|
*/
|
|
static void
|
|
srom_init(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
|
|
u_char count;
|
|
|
|
p+=2;
|
|
if (lp->chipset == DC21140) {
|
|
lp->cache.gepc = (*p++ | GEP_CTRL);
|
|
gep_wr(lp->cache.gepc, dev);
|
|
}
|
|
|
|
/* Block count */
|
|
count = *p++;
|
|
|
|
/* Jump the infoblocks to find types */
|
|
for (;count; --count) {
|
|
if (*p < 128) {
|
|
p += COMPACT_LEN;
|
|
} else if (*(p+1) == 5) {
|
|
type5_infoblock(dev, 1, p);
|
|
p += ((*p & BLOCK_LEN) + 1);
|
|
} else if (*(p+1) == 4) {
|
|
p += ((*p & BLOCK_LEN) + 1);
|
|
} else if (*(p+1) == 3) {
|
|
type3_infoblock(dev, 1, p);
|
|
p += ((*p & BLOCK_LEN) + 1);
|
|
} else if (*(p+1) == 2) {
|
|
p += ((*p & BLOCK_LEN) + 1);
|
|
} else if (*(p+1) == 1) {
|
|
type1_infoblock(dev, 1, p);
|
|
p += ((*p & BLOCK_LEN) + 1);
|
|
} else {
|
|
p += ((*p & BLOCK_LEN) + 1);
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** A generic routine that writes GEP control, data and reset information
|
|
** to the GEP register (21140) or csr15 GEP portion (2114[23]).
|
|
*/
|
|
static void
|
|
srom_exec(struct net_device *dev, u_char *p)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
u_char count = (p ? *p++ : 0);
|
|
u_short *w = (u_short *)p;
|
|
|
|
if (((lp->ibn != 1) && (lp->ibn != 3) && (lp->ibn != 5)) || !count) return;
|
|
|
|
if (lp->chipset != DC21140) RESET_SIA;
|
|
|
|
while (count--) {
|
|
gep_wr(((lp->chipset==DC21140) && (lp->ibn!=5) ?
|
|
*p++ : get_unaligned_le16(w++)), dev);
|
|
mdelay(2); /* 2ms per action */
|
|
}
|
|
|
|
if (lp->chipset != DC21140) {
|
|
outl(lp->cache.csr14, DE4X5_STRR);
|
|
outl(lp->cache.csr13, DE4X5_SICR);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Basically this function is a NOP since it will never be called,
|
|
** unless I implement the DC21041 SROM functions. There's no need
|
|
** since the existing code will be satisfactory for all boards.
|
|
*/
|
|
static int
|
|
dc21041_infoleaf(struct net_device *dev)
|
|
{
|
|
return DE4X5_AUTOSENSE_MS;
|
|
}
|
|
|
|
static int
|
|
dc21140_infoleaf(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_char count = 0;
|
|
u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
|
|
int next_tick = DE4X5_AUTOSENSE_MS;
|
|
|
|
/* Read the connection type */
|
|
p+=2;
|
|
|
|
/* GEP control */
|
|
lp->cache.gepc = (*p++ | GEP_CTRL);
|
|
|
|
/* Block count */
|
|
count = *p++;
|
|
|
|
/* Recursively figure out the info blocks */
|
|
if (*p < 128) {
|
|
next_tick = dc_infoblock[COMPACT](dev, count, p);
|
|
} else {
|
|
next_tick = dc_infoblock[*(p+1)](dev, count, p);
|
|
}
|
|
|
|
if (lp->tcount == count) {
|
|
lp->media = NC;
|
|
if (lp->media != lp->c_media) {
|
|
de4x5_dbg_media(dev);
|
|
lp->c_media = lp->media;
|
|
}
|
|
lp->media = INIT;
|
|
lp->tcount = 0;
|
|
lp->tx_enable = false;
|
|
}
|
|
|
|
return next_tick & ~TIMER_CB;
|
|
}
|
|
|
|
static int
|
|
dc21142_infoleaf(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_char count = 0;
|
|
u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
|
|
int next_tick = DE4X5_AUTOSENSE_MS;
|
|
|
|
/* Read the connection type */
|
|
p+=2;
|
|
|
|
/* Block count */
|
|
count = *p++;
|
|
|
|
/* Recursively figure out the info blocks */
|
|
if (*p < 128) {
|
|
next_tick = dc_infoblock[COMPACT](dev, count, p);
|
|
} else {
|
|
next_tick = dc_infoblock[*(p+1)](dev, count, p);
|
|
}
|
|
|
|
if (lp->tcount == count) {
|
|
lp->media = NC;
|
|
if (lp->media != lp->c_media) {
|
|
de4x5_dbg_media(dev);
|
|
lp->c_media = lp->media;
|
|
}
|
|
lp->media = INIT;
|
|
lp->tcount = 0;
|
|
lp->tx_enable = false;
|
|
}
|
|
|
|
return next_tick & ~TIMER_CB;
|
|
}
|
|
|
|
static int
|
|
dc21143_infoleaf(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_char count = 0;
|
|
u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
|
|
int next_tick = DE4X5_AUTOSENSE_MS;
|
|
|
|
/* Read the connection type */
|
|
p+=2;
|
|
|
|
/* Block count */
|
|
count = *p++;
|
|
|
|
/* Recursively figure out the info blocks */
|
|
if (*p < 128) {
|
|
next_tick = dc_infoblock[COMPACT](dev, count, p);
|
|
} else {
|
|
next_tick = dc_infoblock[*(p+1)](dev, count, p);
|
|
}
|
|
if (lp->tcount == count) {
|
|
lp->media = NC;
|
|
if (lp->media != lp->c_media) {
|
|
de4x5_dbg_media(dev);
|
|
lp->c_media = lp->media;
|
|
}
|
|
lp->media = INIT;
|
|
lp->tcount = 0;
|
|
lp->tx_enable = false;
|
|
}
|
|
|
|
return next_tick & ~TIMER_CB;
|
|
}
|
|
|
|
/*
|
|
** The compact infoblock is only designed for DC21140[A] chips, so
|
|
** we'll reuse the dc21140m_autoconf function. Non MII media only.
|
|
*/
|
|
static int
|
|
compact_infoblock(struct net_device *dev, u_char count, u_char *p)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_char flags, csr6;
|
|
|
|
/* Recursively figure out the info blocks */
|
|
if (--count > lp->tcount) {
|
|
if (*(p+COMPACT_LEN) < 128) {
|
|
return dc_infoblock[COMPACT](dev, count, p+COMPACT_LEN);
|
|
} else {
|
|
return dc_infoblock[*(p+COMPACT_LEN+1)](dev, count, p+COMPACT_LEN);
|
|
}
|
|
}
|
|
|
|
if ((lp->media == INIT) && (lp->timeout < 0)) {
|
|
lp->ibn = COMPACT;
|
|
lp->active = 0;
|
|
gep_wr(lp->cache.gepc, dev);
|
|
lp->infoblock_media = (*p++) & COMPACT_MC;
|
|
lp->cache.gep = *p++;
|
|
csr6 = *p++;
|
|
flags = *p++;
|
|
|
|
lp->asBitValid = (flags & 0x80) ? 0 : -1;
|
|
lp->defMedium = (flags & 0x40) ? -1 : 0;
|
|
lp->asBit = 1 << ((csr6 >> 1) & 0x07);
|
|
lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
|
|
lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
|
|
lp->useMII = false;
|
|
|
|
de4x5_switch_mac_port(dev);
|
|
}
|
|
|
|
return dc21140m_autoconf(dev);
|
|
}
|
|
|
|
/*
|
|
** This block describes non MII media for the DC21140[A] only.
|
|
*/
|
|
static int
|
|
type0_infoblock(struct net_device *dev, u_char count, u_char *p)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_char flags, csr6, len = (*p & BLOCK_LEN)+1;
|
|
|
|
/* Recursively figure out the info blocks */
|
|
if (--count > lp->tcount) {
|
|
if (*(p+len) < 128) {
|
|
return dc_infoblock[COMPACT](dev, count, p+len);
|
|
} else {
|
|
return dc_infoblock[*(p+len+1)](dev, count, p+len);
|
|
}
|
|
}
|
|
|
|
if ((lp->media == INIT) && (lp->timeout < 0)) {
|
|
lp->ibn = 0;
|
|
lp->active = 0;
|
|
gep_wr(lp->cache.gepc, dev);
|
|
p+=2;
|
|
lp->infoblock_media = (*p++) & BLOCK0_MC;
|
|
lp->cache.gep = *p++;
|
|
csr6 = *p++;
|
|
flags = *p++;
|
|
|
|
lp->asBitValid = (flags & 0x80) ? 0 : -1;
|
|
lp->defMedium = (flags & 0x40) ? -1 : 0;
|
|
lp->asBit = 1 << ((csr6 >> 1) & 0x07);
|
|
lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
|
|
lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
|
|
lp->useMII = false;
|
|
|
|
de4x5_switch_mac_port(dev);
|
|
}
|
|
|
|
return dc21140m_autoconf(dev);
|
|
}
|
|
|
|
/* These functions are under construction! */
|
|
|
|
static int
|
|
type1_infoblock(struct net_device *dev, u_char count, u_char *p)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_char len = (*p & BLOCK_LEN)+1;
|
|
|
|
/* Recursively figure out the info blocks */
|
|
if (--count > lp->tcount) {
|
|
if (*(p+len) < 128) {
|
|
return dc_infoblock[COMPACT](dev, count, p+len);
|
|
} else {
|
|
return dc_infoblock[*(p+len+1)](dev, count, p+len);
|
|
}
|
|
}
|
|
|
|
p += 2;
|
|
if (lp->state == INITIALISED) {
|
|
lp->ibn = 1;
|
|
lp->active = *p++;
|
|
lp->phy[lp->active].gep = (*p ? p : NULL); p += (*p + 1);
|
|
lp->phy[lp->active].rst = (*p ? p : NULL); p += (*p + 1);
|
|
lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2;
|
|
lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
|
|
lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
|
|
lp->phy[lp->active].ttm = get_unaligned_le16(p);
|
|
return 0;
|
|
} else if ((lp->media == INIT) && (lp->timeout < 0)) {
|
|
lp->ibn = 1;
|
|
lp->active = *p;
|
|
lp->infoblock_csr6 = OMR_MII_100;
|
|
lp->useMII = true;
|
|
lp->infoblock_media = ANS;
|
|
|
|
de4x5_switch_mac_port(dev);
|
|
}
|
|
|
|
return dc21140m_autoconf(dev);
|
|
}
|
|
|
|
static int
|
|
type2_infoblock(struct net_device *dev, u_char count, u_char *p)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_char len = (*p & BLOCK_LEN)+1;
|
|
|
|
/* Recursively figure out the info blocks */
|
|
if (--count > lp->tcount) {
|
|
if (*(p+len) < 128) {
|
|
return dc_infoblock[COMPACT](dev, count, p+len);
|
|
} else {
|
|
return dc_infoblock[*(p+len+1)](dev, count, p+len);
|
|
}
|
|
}
|
|
|
|
if ((lp->media == INIT) && (lp->timeout < 0)) {
|
|
lp->ibn = 2;
|
|
lp->active = 0;
|
|
p += 2;
|
|
lp->infoblock_media = (*p) & MEDIA_CODE;
|
|
|
|
if ((*p++) & EXT_FIELD) {
|
|
lp->cache.csr13 = get_unaligned_le16(p); p += 2;
|
|
lp->cache.csr14 = get_unaligned_le16(p); p += 2;
|
|
lp->cache.csr15 = get_unaligned_le16(p); p += 2;
|
|
} else {
|
|
lp->cache.csr13 = CSR13;
|
|
lp->cache.csr14 = CSR14;
|
|
lp->cache.csr15 = CSR15;
|
|
}
|
|
lp->cache.gepc = ((s32)(get_unaligned_le16(p)) << 16); p += 2;
|
|
lp->cache.gep = ((s32)(get_unaligned_le16(p)) << 16);
|
|
lp->infoblock_csr6 = OMR_SIA;
|
|
lp->useMII = false;
|
|
|
|
de4x5_switch_mac_port(dev);
|
|
}
|
|
|
|
return dc2114x_autoconf(dev);
|
|
}
|
|
|
|
static int
|
|
type3_infoblock(struct net_device *dev, u_char count, u_char *p)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_char len = (*p & BLOCK_LEN)+1;
|
|
|
|
/* Recursively figure out the info blocks */
|
|
if (--count > lp->tcount) {
|
|
if (*(p+len) < 128) {
|
|
return dc_infoblock[COMPACT](dev, count, p+len);
|
|
} else {
|
|
return dc_infoblock[*(p+len+1)](dev, count, p+len);
|
|
}
|
|
}
|
|
|
|
p += 2;
|
|
if (lp->state == INITIALISED) {
|
|
lp->ibn = 3;
|
|
lp->active = *p++;
|
|
if (MOTO_SROM_BUG) lp->active = 0;
|
|
lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
|
|
lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
|
|
lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2;
|
|
lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
|
|
lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
|
|
lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2;
|
|
lp->phy[lp->active].mci = *p;
|
|
return 0;
|
|
} else if ((lp->media == INIT) && (lp->timeout < 0)) {
|
|
lp->ibn = 3;
|
|
lp->active = *p;
|
|
if (MOTO_SROM_BUG) lp->active = 0;
|
|
lp->infoblock_csr6 = OMR_MII_100;
|
|
lp->useMII = true;
|
|
lp->infoblock_media = ANS;
|
|
|
|
de4x5_switch_mac_port(dev);
|
|
}
|
|
|
|
return dc2114x_autoconf(dev);
|
|
}
|
|
|
|
static int
|
|
type4_infoblock(struct net_device *dev, u_char count, u_char *p)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_char flags, csr6, len = (*p & BLOCK_LEN)+1;
|
|
|
|
/* Recursively figure out the info blocks */
|
|
if (--count > lp->tcount) {
|
|
if (*(p+len) < 128) {
|
|
return dc_infoblock[COMPACT](dev, count, p+len);
|
|
} else {
|
|
return dc_infoblock[*(p+len+1)](dev, count, p+len);
|
|
}
|
|
}
|
|
|
|
if ((lp->media == INIT) && (lp->timeout < 0)) {
|
|
lp->ibn = 4;
|
|
lp->active = 0;
|
|
p+=2;
|
|
lp->infoblock_media = (*p++) & MEDIA_CODE;
|
|
lp->cache.csr13 = CSR13; /* Hard coded defaults */
|
|
lp->cache.csr14 = CSR14;
|
|
lp->cache.csr15 = CSR15;
|
|
lp->cache.gepc = ((s32)(get_unaligned_le16(p)) << 16); p += 2;
|
|
lp->cache.gep = ((s32)(get_unaligned_le16(p)) << 16); p += 2;
|
|
csr6 = *p++;
|
|
flags = *p++;
|
|
|
|
lp->asBitValid = (flags & 0x80) ? 0 : -1;
|
|
lp->defMedium = (flags & 0x40) ? -1 : 0;
|
|
lp->asBit = 1 << ((csr6 >> 1) & 0x07);
|
|
lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
|
|
lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
|
|
lp->useMII = false;
|
|
|
|
de4x5_switch_mac_port(dev);
|
|
}
|
|
|
|
return dc2114x_autoconf(dev);
|
|
}
|
|
|
|
/*
|
|
** This block type provides information for resetting external devices
|
|
** (chips) through the General Purpose Register.
|
|
*/
|
|
static int
|
|
type5_infoblock(struct net_device *dev, u_char count, u_char *p)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_char len = (*p & BLOCK_LEN)+1;
|
|
|
|
/* Recursively figure out the info blocks */
|
|
if (--count > lp->tcount) {
|
|
if (*(p+len) < 128) {
|
|
return dc_infoblock[COMPACT](dev, count, p+len);
|
|
} else {
|
|
return dc_infoblock[*(p+len+1)](dev, count, p+len);
|
|
}
|
|
}
|
|
|
|
/* Must be initializing to run this code */
|
|
if ((lp->state == INITIALISED) || (lp->media == INIT)) {
|
|
p+=2;
|
|
lp->rst = p;
|
|
srom_exec(dev, lp->rst);
|
|
}
|
|
|
|
return DE4X5_AUTOSENSE_MS;
|
|
}
|
|
|
|
/*
|
|
** MII Read/Write
|
|
*/
|
|
|
|
static int
|
|
mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr)
|
|
{
|
|
mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */
|
|
mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */
|
|
mii_wdata(MII_STRD, 4, ioaddr); /* SFD and Read operation */
|
|
mii_address(phyaddr, ioaddr); /* PHY address to be accessed */
|
|
mii_address(phyreg, ioaddr); /* PHY Register to read */
|
|
mii_ta(MII_STRD, ioaddr); /* Turn around time - 2 MDC */
|
|
|
|
return mii_rdata(ioaddr); /* Read data */
|
|
}
|
|
|
|
static void
|
|
mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr)
|
|
{
|
|
mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */
|
|
mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */
|
|
mii_wdata(MII_STWR, 4, ioaddr); /* SFD and Write operation */
|
|
mii_address(phyaddr, ioaddr); /* PHY address to be accessed */
|
|
mii_address(phyreg, ioaddr); /* PHY Register to write */
|
|
mii_ta(MII_STWR, ioaddr); /* Turn around time - 2 MDC */
|
|
data = mii_swap(data, 16); /* Swap data bit ordering */
|
|
mii_wdata(data, 16, ioaddr); /* Write data */
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
mii_rdata(u_long ioaddr)
|
|
{
|
|
int i;
|
|
s32 tmp = 0;
|
|
|
|
for (i=0; i<16; i++) {
|
|
tmp <<= 1;
|
|
tmp |= getfrom_mii(MII_MRD | MII_RD, ioaddr);
|
|
}
|
|
|
|
return tmp;
|
|
}
|
|
|
|
static void
|
|
mii_wdata(int data, int len, u_long ioaddr)
|
|
{
|
|
int i;
|
|
|
|
for (i=0; i<len; i++) {
|
|
sendto_mii(MII_MWR | MII_WR, data, ioaddr);
|
|
data >>= 1;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mii_address(u_char addr, u_long ioaddr)
|
|
{
|
|
int i;
|
|
|
|
addr = mii_swap(addr, 5);
|
|
for (i=0; i<5; i++) {
|
|
sendto_mii(MII_MWR | MII_WR, addr, ioaddr);
|
|
addr >>= 1;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mii_ta(u_long rw, u_long ioaddr)
|
|
{
|
|
if (rw == MII_STWR) {
|
|
sendto_mii(MII_MWR | MII_WR, 1, ioaddr);
|
|
sendto_mii(MII_MWR | MII_WR, 0, ioaddr);
|
|
} else {
|
|
getfrom_mii(MII_MRD | MII_RD, ioaddr); /* Tri-state MDIO */
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
mii_swap(int data, int len)
|
|
{
|
|
int i, tmp = 0;
|
|
|
|
for (i=0; i<len; i++) {
|
|
tmp <<= 1;
|
|
tmp |= (data & 1);
|
|
data >>= 1;
|
|
}
|
|
|
|
return tmp;
|
|
}
|
|
|
|
static void
|
|
sendto_mii(u32 command, int data, u_long ioaddr)
|
|
{
|
|
u32 j;
|
|
|
|
j = (data & 1) << 17;
|
|
outl(command | j, ioaddr);
|
|
udelay(1);
|
|
outl(command | MII_MDC | j, ioaddr);
|
|
udelay(1);
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
getfrom_mii(u32 command, u_long ioaddr)
|
|
{
|
|
outl(command, ioaddr);
|
|
udelay(1);
|
|
outl(command | MII_MDC, ioaddr);
|
|
udelay(1);
|
|
|
|
return ((inl(ioaddr) >> 19) & 1);
|
|
}
|
|
|
|
/*
|
|
** Here's 3 ways to calculate the OUI from the ID registers.
|
|
*/
|
|
static int
|
|
mii_get_oui(u_char phyaddr, u_long ioaddr)
|
|
{
|
|
/*
|
|
union {
|
|
u_short reg;
|
|
u_char breg[2];
|
|
} a;
|
|
int i, r2, r3, ret=0;*/
|
|
int r2, r3;
|
|
|
|
/* Read r2 and r3 */
|
|
r2 = mii_rd(MII_ID0, phyaddr, ioaddr);
|
|
r3 = mii_rd(MII_ID1, phyaddr, ioaddr);
|
|
/* SEEQ and Cypress way * /
|
|
/ * Shuffle r2 and r3 * /
|
|
a.reg=0;
|
|
r3 = ((r3>>10)|(r2<<6))&0x0ff;
|
|
r2 = ((r2>>2)&0x3fff);
|
|
|
|
/ * Bit reverse r3 * /
|
|
for (i=0;i<8;i++) {
|
|
ret<<=1;
|
|
ret |= (r3&1);
|
|
r3>>=1;
|
|
}
|
|
|
|
/ * Bit reverse r2 * /
|
|
for (i=0;i<16;i++) {
|
|
a.reg<<=1;
|
|
a.reg |= (r2&1);
|
|
r2>>=1;
|
|
}
|
|
|
|
/ * Swap r2 bytes * /
|
|
i=a.breg[0];
|
|
a.breg[0]=a.breg[1];
|
|
a.breg[1]=i;
|
|
|
|
return ((a.reg<<8)|ret); */ /* SEEQ and Cypress way */
|
|
/* return ((r2<<6)|(u_int)(r3>>10)); */ /* NATIONAL and BROADCOM way */
|
|
return r2; /* (I did it) My way */
|
|
}
|
|
|
|
/*
|
|
** The SROM spec forces us to search addresses [1-31 0]. Bummer.
|
|
*/
|
|
static int
|
|
mii_get_phy(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
int i, j, k, n, limit=ARRAY_SIZE(phy_info);
|
|
int id;
|
|
|
|
lp->active = 0;
|
|
lp->useMII = true;
|
|
|
|
/* Search the MII address space for possible PHY devices */
|
|
for (n=0, lp->mii_cnt=0, i=1; !((i==1) && (n==1)); i=(i+1)%DE4X5_MAX_MII) {
|
|
lp->phy[lp->active].addr = i;
|
|
if (i==0) n++; /* Count cycles */
|
|
while (de4x5_reset_phy(dev)<0) udelay(100);/* Wait for reset */
|
|
id = mii_get_oui(i, DE4X5_MII);
|
|
if ((id == 0) || (id == 65535)) continue; /* Valid ID? */
|
|
for (j=0; j<limit; j++) { /* Search PHY table */
|
|
if (id != phy_info[j].id) continue; /* ID match? */
|
|
for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
|
|
if (k < DE4X5_MAX_PHY) {
|
|
memcpy((char *)&lp->phy[k],
|
|
(char *)&phy_info[j], sizeof(struct phy_table));
|
|
lp->phy[k].addr = i;
|
|
lp->mii_cnt++;
|
|
lp->active++;
|
|
} else {
|
|
goto purgatory; /* Stop the search */
|
|
}
|
|
break;
|
|
}
|
|
if ((j == limit) && (i < DE4X5_MAX_MII)) {
|
|
for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
|
|
lp->phy[k].addr = i;
|
|
lp->phy[k].id = id;
|
|
lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */
|
|
lp->phy[k].spd.mask = GENERIC_MASK; /* 100Mb/s technologies */
|
|
lp->phy[k].spd.value = GENERIC_VALUE; /* TX & T4, H/F Duplex */
|
|
lp->mii_cnt++;
|
|
lp->active++;
|
|
printk("%s: Using generic MII device control. If the board doesn't operate, \nplease mail the following dump to the author:\n", dev->name);
|
|
j = de4x5_debug;
|
|
de4x5_debug |= DEBUG_MII;
|
|
de4x5_dbg_mii(dev, k);
|
|
de4x5_debug = j;
|
|
printk("\n");
|
|
}
|
|
}
|
|
purgatory:
|
|
lp->active = 0;
|
|
if (lp->phy[0].id) { /* Reset the PHY devices */
|
|
for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++) { /*For each PHY*/
|
|
mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII);
|
|
while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST);
|
|
|
|
de4x5_dbg_mii(dev, k);
|
|
}
|
|
}
|
|
if (!lp->mii_cnt) lp->useMII = false;
|
|
|
|
return lp->mii_cnt;
|
|
}
|
|
|
|
static char *
|
|
build_setup_frame(struct net_device *dev, int mode)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int i;
|
|
char *pa = lp->setup_frame;
|
|
|
|
/* Initialise the setup frame */
|
|
if (mode == ALL) {
|
|
memset(lp->setup_frame, 0, SETUP_FRAME_LEN);
|
|
}
|
|
|
|
if (lp->setup_f == HASH_PERF) {
|
|
for (pa=lp->setup_frame+IMPERF_PA_OFFSET, i=0; i<ETH_ALEN; i++) {
|
|
*(pa + i) = dev->dev_addr[i]; /* Host address */
|
|
if (i & 0x01) pa += 2;
|
|
}
|
|
*(lp->setup_frame + (HASH_TABLE_LEN >> 3) - 3) = 0x80;
|
|
} else {
|
|
for (i=0; i<ETH_ALEN; i++) { /* Host address */
|
|
*(pa + (i&1)) = dev->dev_addr[i];
|
|
if (i & 0x01) pa += 4;
|
|
}
|
|
for (i=0; i<ETH_ALEN; i++) { /* Broadcast address */
|
|
*(pa + (i&1)) = (char) 0xff;
|
|
if (i & 0x01) pa += 4;
|
|
}
|
|
}
|
|
|
|
return pa; /* Points to the next entry */
|
|
}
|
|
|
|
static void
|
|
disable_ast(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
del_timer_sync(&lp->timer);
|
|
}
|
|
|
|
static long
|
|
de4x5_switch_mac_port(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
s32 omr;
|
|
|
|
STOP_DE4X5;
|
|
|
|
/* Assert the OMR_PS bit in CSR6 */
|
|
omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR |
|
|
OMR_FDX));
|
|
omr |= lp->infoblock_csr6;
|
|
if (omr & OMR_PS) omr |= OMR_HBD;
|
|
outl(omr, DE4X5_OMR);
|
|
|
|
/* Soft Reset */
|
|
RESET_DE4X5;
|
|
|
|
/* Restore the GEP - especially for COMPACT and Type 0 Infoblocks */
|
|
if (lp->chipset == DC21140) {
|
|
gep_wr(lp->cache.gepc, dev);
|
|
gep_wr(lp->cache.gep, dev);
|
|
} else if ((lp->chipset & ~0x0ff) == DC2114x) {
|
|
reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14, lp->cache.csr15);
|
|
}
|
|
|
|
/* Restore CSR6 */
|
|
outl(omr, DE4X5_OMR);
|
|
|
|
/* Reset CSR8 */
|
|
inl(DE4X5_MFC);
|
|
|
|
return omr;
|
|
}
|
|
|
|
static void
|
|
gep_wr(s32 data, struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
|
|
if (lp->chipset == DC21140) {
|
|
outl(data, DE4X5_GEP);
|
|
} else if ((lp->chipset & ~0x00ff) == DC2114x) {
|
|
outl((data<<16) | lp->cache.csr15, DE4X5_SIGR);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
gep_rd(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
|
|
if (lp->chipset == DC21140) {
|
|
return inl(DE4X5_GEP);
|
|
} else if ((lp->chipset & ~0x00ff) == DC2114x) {
|
|
return (inl(DE4X5_SIGR) & 0x000fffff);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
yawn(struct net_device *dev, int state)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
|
|
if ((lp->chipset == DC21040) || (lp->chipset == DC21140)) return;
|
|
|
|
if(lp->bus == EISA) {
|
|
switch(state) {
|
|
case WAKEUP:
|
|
outb(WAKEUP, PCI_CFPM);
|
|
mdelay(10);
|
|
break;
|
|
|
|
case SNOOZE:
|
|
outb(SNOOZE, PCI_CFPM);
|
|
break;
|
|
|
|
case SLEEP:
|
|
outl(0, DE4X5_SICR);
|
|
outb(SLEEP, PCI_CFPM);
|
|
break;
|
|
}
|
|
} else {
|
|
struct pci_dev *pdev = to_pci_dev (lp->gendev);
|
|
switch(state) {
|
|
case WAKEUP:
|
|
pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP);
|
|
mdelay(10);
|
|
break;
|
|
|
|
case SNOOZE:
|
|
pci_write_config_byte(pdev, PCI_CFDA_PSM, SNOOZE);
|
|
break;
|
|
|
|
case SLEEP:
|
|
outl(0, DE4X5_SICR);
|
|
pci_write_config_byte(pdev, PCI_CFDA_PSM, SLEEP);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
de4x5_parse_params(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
char *p, *q, t;
|
|
|
|
lp->params.fdx = 0;
|
|
lp->params.autosense = AUTO;
|
|
|
|
if (args == NULL) return;
|
|
|
|
if ((p = strstr(args, dev->name))) {
|
|
if (!(q = strstr(p+strlen(dev->name), "eth"))) q = p + strlen(p);
|
|
t = *q;
|
|
*q = '\0';
|
|
|
|
if (strstr(p, "fdx") || strstr(p, "FDX")) lp->params.fdx = 1;
|
|
|
|
if (strstr(p, "autosense") || strstr(p, "AUTOSENSE")) {
|
|
if (strstr(p, "TP")) {
|
|
lp->params.autosense = TP;
|
|
} else if (strstr(p, "TP_NW")) {
|
|
lp->params.autosense = TP_NW;
|
|
} else if (strstr(p, "BNC")) {
|
|
lp->params.autosense = BNC;
|
|
} else if (strstr(p, "AUI")) {
|
|
lp->params.autosense = AUI;
|
|
} else if (strstr(p, "BNC_AUI")) {
|
|
lp->params.autosense = BNC;
|
|
} else if (strstr(p, "10Mb")) {
|
|
lp->params.autosense = _10Mb;
|
|
} else if (strstr(p, "100Mb")) {
|
|
lp->params.autosense = _100Mb;
|
|
} else if (strstr(p, "AUTO")) {
|
|
lp->params.autosense = AUTO;
|
|
}
|
|
}
|
|
*q = t;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
de4x5_dbg_open(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
int i;
|
|
|
|
if (de4x5_debug & DEBUG_OPEN) {
|
|
printk("%s: de4x5 opening with irq %d\n",dev->name,dev->irq);
|
|
printk("\tphysical address: ");
|
|
for (i=0;i<6;i++) {
|
|
printk("%2.2x:",(short)dev->dev_addr[i]);
|
|
}
|
|
printk("\n");
|
|
printk("Descriptor head addresses:\n");
|
|
printk("\t0x%8.8lx 0x%8.8lx\n",(u_long)lp->rx_ring,(u_long)lp->tx_ring);
|
|
printk("Descriptor addresses:\nRX: ");
|
|
for (i=0;i<lp->rxRingSize-1;i++){
|
|
if (i < 3) {
|
|
printk("0x%8.8lx ",(u_long)&lp->rx_ring[i].status);
|
|
}
|
|
}
|
|
printk("...0x%8.8lx\n",(u_long)&lp->rx_ring[i].status);
|
|
printk("TX: ");
|
|
for (i=0;i<lp->txRingSize-1;i++){
|
|
if (i < 3) {
|
|
printk("0x%8.8lx ", (u_long)&lp->tx_ring[i].status);
|
|
}
|
|
}
|
|
printk("...0x%8.8lx\n", (u_long)&lp->tx_ring[i].status);
|
|
printk("Descriptor buffers:\nRX: ");
|
|
for (i=0;i<lp->rxRingSize-1;i++){
|
|
if (i < 3) {
|
|
printk("0x%8.8x ",le32_to_cpu(lp->rx_ring[i].buf));
|
|
}
|
|
}
|
|
printk("...0x%8.8x\n",le32_to_cpu(lp->rx_ring[i].buf));
|
|
printk("TX: ");
|
|
for (i=0;i<lp->txRingSize-1;i++){
|
|
if (i < 3) {
|
|
printk("0x%8.8x ", le32_to_cpu(lp->tx_ring[i].buf));
|
|
}
|
|
}
|
|
printk("...0x%8.8x\n", le32_to_cpu(lp->tx_ring[i].buf));
|
|
printk("Ring size: \nRX: %d\nTX: %d\n",
|
|
(short)lp->rxRingSize,
|
|
(short)lp->txRingSize);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
de4x5_dbg_mii(struct net_device *dev, int k)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
u_long iobase = dev->base_addr;
|
|
|
|
if (de4x5_debug & DEBUG_MII) {
|
|
printk("\nMII device address: %d\n", lp->phy[k].addr);
|
|
printk("MII CR: %x\n",mii_rd(MII_CR,lp->phy[k].addr,DE4X5_MII));
|
|
printk("MII SR: %x\n",mii_rd(MII_SR,lp->phy[k].addr,DE4X5_MII));
|
|
printk("MII ID0: %x\n",mii_rd(MII_ID0,lp->phy[k].addr,DE4X5_MII));
|
|
printk("MII ID1: %x\n",mii_rd(MII_ID1,lp->phy[k].addr,DE4X5_MII));
|
|
if (lp->phy[k].id != BROADCOM_T4) {
|
|
printk("MII ANA: %x\n",mii_rd(0x04,lp->phy[k].addr,DE4X5_MII));
|
|
printk("MII ANC: %x\n",mii_rd(0x05,lp->phy[k].addr,DE4X5_MII));
|
|
}
|
|
printk("MII 16: %x\n",mii_rd(0x10,lp->phy[k].addr,DE4X5_MII));
|
|
if (lp->phy[k].id != BROADCOM_T4) {
|
|
printk("MII 17: %x\n",mii_rd(0x11,lp->phy[k].addr,DE4X5_MII));
|
|
printk("MII 18: %x\n",mii_rd(0x12,lp->phy[k].addr,DE4X5_MII));
|
|
} else {
|
|
printk("MII 20: %x\n",mii_rd(0x14,lp->phy[k].addr,DE4X5_MII));
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
de4x5_dbg_media(struct net_device *dev)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
|
|
if (lp->media != lp->c_media) {
|
|
if (de4x5_debug & DEBUG_MEDIA) {
|
|
printk("%s: media is %s%s\n", dev->name,
|
|
(lp->media == NC ? "unconnected, link down or incompatible connection" :
|
|
(lp->media == TP ? "TP" :
|
|
(lp->media == ANS ? "TP/Nway" :
|
|
(lp->media == BNC ? "BNC" :
|
|
(lp->media == AUI ? "AUI" :
|
|
(lp->media == BNC_AUI ? "BNC/AUI" :
|
|
(lp->media == EXT_SIA ? "EXT SIA" :
|
|
(lp->media == _100Mb ? "100Mb/s" :
|
|
(lp->media == _10Mb ? "10Mb/s" :
|
|
"???"
|
|
))))))))), (lp->fdx?" full duplex.":"."));
|
|
}
|
|
lp->c_media = lp->media;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
de4x5_dbg_srom(struct de4x5_srom *p)
|
|
{
|
|
int i;
|
|
|
|
if (de4x5_debug & DEBUG_SROM) {
|
|
printk("Sub-system Vendor ID: %04x\n", *((u_short *)p->sub_vendor_id));
|
|
printk("Sub-system ID: %04x\n", *((u_short *)p->sub_system_id));
|
|
printk("ID Block CRC: %02x\n", (u_char)(p->id_block_crc));
|
|
printk("SROM version: %02x\n", (u_char)(p->version));
|
|
printk("# controllers: %02x\n", (u_char)(p->num_controllers));
|
|
|
|
printk("Hardware Address: %pM\n", p->ieee_addr);
|
|
printk("CRC checksum: %04x\n", (u_short)(p->chksum));
|
|
for (i=0; i<64; i++) {
|
|
printk("%3d %04x\n", i<<1, (u_short)*((u_short *)p+i));
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
de4x5_dbg_rx(struct sk_buff *skb, int len)
|
|
{
|
|
int i, j;
|
|
|
|
if (de4x5_debug & DEBUG_RX) {
|
|
printk("R: %pM <- %pM len/SAP:%02x%02x [%d]\n",
|
|
skb->data, &skb->data[6],
|
|
(u_char)skb->data[12],
|
|
(u_char)skb->data[13],
|
|
len);
|
|
for (j=0; len>0;j+=16, len-=16) {
|
|
printk(" %03x: ",j);
|
|
for (i=0; i<16 && i<len; i++) {
|
|
printk("%02x ",(u_char)skb->data[i+j]);
|
|
}
|
|
printk("\n");
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Perform IOCTL call functions here. Some are privileged operations and the
|
|
** effective uid is checked in those cases. In the normal course of events
|
|
** this function is only used for my testing.
|
|
*/
|
|
static int
|
|
de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct de4x5_private *lp = netdev_priv(dev);
|
|
struct de4x5_ioctl *ioc = (struct de4x5_ioctl *) &rq->ifr_ifru;
|
|
u_long iobase = dev->base_addr;
|
|
int i, j, status = 0;
|
|
s32 omr;
|
|
union {
|
|
u8 addr[144];
|
|
u16 sval[72];
|
|
u32 lval[36];
|
|
} tmp;
|
|
u_long flags = 0;
|
|
|
|
switch(ioc->cmd) {
|
|
case DE4X5_GET_HWADDR: /* Get the hardware address */
|
|
ioc->len = ETH_ALEN;
|
|
for (i=0; i<ETH_ALEN; i++) {
|
|
tmp.addr[i] = dev->dev_addr[i];
|
|
}
|
|
if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
|
|
break;
|
|
|
|
case DE4X5_SET_HWADDR: /* Set the hardware address */
|
|
if (!capable(CAP_NET_ADMIN)) return -EPERM;
|
|
if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN)) return -EFAULT;
|
|
if (netif_queue_stopped(dev))
|
|
return -EBUSY;
|
|
netif_stop_queue(dev);
|
|
for (i=0; i<ETH_ALEN; i++) {
|
|
dev->dev_addr[i] = tmp.addr[i];
|
|
}
|
|
build_setup_frame(dev, PHYS_ADDR_ONLY);
|
|
/* Set up the descriptor and give ownership to the card */
|
|
load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
|
|
SETUP_FRAME_LEN, (struct sk_buff *)1);
|
|
lp->tx_new = (++lp->tx_new) % lp->txRingSize;
|
|
outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */
|
|
netif_wake_queue(dev); /* Unlock the TX ring */
|
|
break;
|
|
|
|
case DE4X5_SAY_BOO: /* Say "Boo!" to the kernel log file */
|
|
if (!capable(CAP_NET_ADMIN)) return -EPERM;
|
|
printk("%s: Boo!\n", dev->name);
|
|
break;
|
|
|
|
case DE4X5_MCA_EN: /* Enable pass all multicast addressing */
|
|
if (!capable(CAP_NET_ADMIN)) return -EPERM;
|
|
omr = inl(DE4X5_OMR);
|
|
omr |= OMR_PM;
|
|
outl(omr, DE4X5_OMR);
|
|
break;
|
|
|
|
case DE4X5_GET_STATS: /* Get the driver statistics */
|
|
{
|
|
struct pkt_stats statbuf;
|
|
ioc->len = sizeof(statbuf);
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
memcpy(&statbuf, &lp->pktStats, ioc->len);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
if (copy_to_user(ioc->data, &statbuf, ioc->len))
|
|
return -EFAULT;
|
|
break;
|
|
}
|
|
case DE4X5_CLR_STATS: /* Zero out the driver statistics */
|
|
if (!capable(CAP_NET_ADMIN)) return -EPERM;
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
memset(&lp->pktStats, 0, sizeof(lp->pktStats));
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
break;
|
|
|
|
case DE4X5_GET_OMR: /* Get the OMR Register contents */
|
|
tmp.addr[0] = inl(DE4X5_OMR);
|
|
if (copy_to_user(ioc->data, tmp.addr, 1)) return -EFAULT;
|
|
break;
|
|
|
|
case DE4X5_SET_OMR: /* Set the OMR Register contents */
|
|
if (!capable(CAP_NET_ADMIN)) return -EPERM;
|
|
if (copy_from_user(tmp.addr, ioc->data, 1)) return -EFAULT;
|
|
outl(tmp.addr[0], DE4X5_OMR);
|
|
break;
|
|
|
|
case DE4X5_GET_REG: /* Get the DE4X5 Registers */
|
|
j = 0;
|
|
tmp.lval[0] = inl(DE4X5_STS); j+=4;
|
|
tmp.lval[1] = inl(DE4X5_BMR); j+=4;
|
|
tmp.lval[2] = inl(DE4X5_IMR); j+=4;
|
|
tmp.lval[3] = inl(DE4X5_OMR); j+=4;
|
|
tmp.lval[4] = inl(DE4X5_SISR); j+=4;
|
|
tmp.lval[5] = inl(DE4X5_SICR); j+=4;
|
|
tmp.lval[6] = inl(DE4X5_STRR); j+=4;
|
|
tmp.lval[7] = inl(DE4X5_SIGR); j+=4;
|
|
ioc->len = j;
|
|
if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
|
|
break;
|
|
|
|
#define DE4X5_DUMP 0x0f /* Dump the DE4X5 Status */
|
|
/*
|
|
case DE4X5_DUMP:
|
|
j = 0;
|
|
tmp.addr[j++] = dev->irq;
|
|
for (i=0; i<ETH_ALEN; i++) {
|
|
tmp.addr[j++] = dev->dev_addr[i];
|
|
}
|
|
tmp.addr[j++] = lp->rxRingSize;
|
|
tmp.lval[j>>2] = (long)lp->rx_ring; j+=4;
|
|
tmp.lval[j>>2] = (long)lp->tx_ring; j+=4;
|
|
|
|
for (i=0;i<lp->rxRingSize-1;i++){
|
|
if (i < 3) {
|
|
tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4;
|
|
}
|
|
}
|
|
tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4;
|
|
for (i=0;i<lp->txRingSize-1;i++){
|
|
if (i < 3) {
|
|
tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4;
|
|
}
|
|
}
|
|
tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4;
|
|
|
|
for (i=0;i<lp->rxRingSize-1;i++){
|
|
if (i < 3) {
|
|
tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4;
|
|
}
|
|
}
|
|
tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4;
|
|
for (i=0;i<lp->txRingSize-1;i++){
|
|
if (i < 3) {
|
|
tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4;
|
|
}
|
|
}
|
|
tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4;
|
|
|
|
for (i=0;i<lp->rxRingSize;i++){
|
|
tmp.lval[j>>2] = le32_to_cpu(lp->rx_ring[i].status); j+=4;
|
|
}
|
|
for (i=0;i<lp->txRingSize;i++){
|
|
tmp.lval[j>>2] = le32_to_cpu(lp->tx_ring[i].status); j+=4;
|
|
}
|
|
|
|
tmp.lval[j>>2] = inl(DE4X5_BMR); j+=4;
|
|
tmp.lval[j>>2] = inl(DE4X5_TPD); j+=4;
|
|
tmp.lval[j>>2] = inl(DE4X5_RPD); j+=4;
|
|
tmp.lval[j>>2] = inl(DE4X5_RRBA); j+=4;
|
|
tmp.lval[j>>2] = inl(DE4X5_TRBA); j+=4;
|
|
tmp.lval[j>>2] = inl(DE4X5_STS); j+=4;
|
|
tmp.lval[j>>2] = inl(DE4X5_OMR); j+=4;
|
|
tmp.lval[j>>2] = inl(DE4X5_IMR); j+=4;
|
|
tmp.lval[j>>2] = lp->chipset; j+=4;
|
|
if (lp->chipset == DC21140) {
|
|
tmp.lval[j>>2] = gep_rd(dev); j+=4;
|
|
} else {
|
|
tmp.lval[j>>2] = inl(DE4X5_SISR); j+=4;
|
|
tmp.lval[j>>2] = inl(DE4X5_SICR); j+=4;
|
|
tmp.lval[j>>2] = inl(DE4X5_STRR); j+=4;
|
|
tmp.lval[j>>2] = inl(DE4X5_SIGR); j+=4;
|
|
}
|
|
tmp.lval[j>>2] = lp->phy[lp->active].id; j+=4;
|
|
if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
|
|
tmp.lval[j>>2] = lp->active; j+=4;
|
|
tmp.lval[j>>2]=mii_rd(MII_CR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
|
|
tmp.lval[j>>2]=mii_rd(MII_SR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
|
|
tmp.lval[j>>2]=mii_rd(MII_ID0,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
|
|
tmp.lval[j>>2]=mii_rd(MII_ID1,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
|
|
if (lp->phy[lp->active].id != BROADCOM_T4) {
|
|
tmp.lval[j>>2]=mii_rd(MII_ANA,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
|
|
tmp.lval[j>>2]=mii_rd(MII_ANLPA,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
|
|
}
|
|
tmp.lval[j>>2]=mii_rd(0x10,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
|
|
if (lp->phy[lp->active].id != BROADCOM_T4) {
|
|
tmp.lval[j>>2]=mii_rd(0x11,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
|
|
tmp.lval[j>>2]=mii_rd(0x12,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
|
|
} else {
|
|
tmp.lval[j>>2]=mii_rd(0x14,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
|
|
}
|
|
}
|
|
|
|
tmp.addr[j++] = lp->txRingSize;
|
|
tmp.addr[j++] = netif_queue_stopped(dev);
|
|
|
|
ioc->len = j;
|
|
if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
|
|
break;
|
|
|
|
*/
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static int __init de4x5_module_init (void)
|
|
{
|
|
int err = 0;
|
|
|
|
#ifdef CONFIG_PCI
|
|
err = pci_register_driver(&de4x5_pci_driver);
|
|
#endif
|
|
#ifdef CONFIG_EISA
|
|
err |= eisa_driver_register (&de4x5_eisa_driver);
|
|
#endif
|
|
|
|
return err;
|
|
}
|
|
|
|
static void __exit de4x5_module_exit (void)
|
|
{
|
|
#ifdef CONFIG_PCI
|
|
pci_unregister_driver (&de4x5_pci_driver);
|
|
#endif
|
|
#ifdef CONFIG_EISA
|
|
eisa_driver_unregister (&de4x5_eisa_driver);
|
|
#endif
|
|
}
|
|
|
|
module_init (de4x5_module_init);
|
|
module_exit (de4x5_module_exit);
|