kernel-fxtec-pro1x/arch/avr32/mach-at32ap/at32ap700x.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

2353 lines
53 KiB
C

/*
* Copyright (C) 2005-2006 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dw_dmac.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/usb/atmel_usba_udc.h>
#include <mach/atmel-mci.h>
#include <linux/atmel-mci.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <mach/at32ap700x.h>
#include <mach/board.h>
#include <mach/hmatrix.h>
#include <mach/portmux.h>
#include <mach/sram.h>
#include <sound/atmel-abdac.h>
#include <sound/atmel-ac97c.h>
#include <video/atmel_lcdc.h>
#include "clock.h"
#include "pio.h"
#include "pm.h"
#define PBMEM(base) \
{ \
.start = base, \
.end = base + 0x3ff, \
.flags = IORESOURCE_MEM, \
}
#define IRQ(num) \
{ \
.start = num, \
.end = num, \
.flags = IORESOURCE_IRQ, \
}
#define NAMED_IRQ(num, _name) \
{ \
.start = num, \
.end = num, \
.name = _name, \
.flags = IORESOURCE_IRQ, \
}
/* REVISIT these assume *every* device supports DMA, but several
* don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
*/
#define DEFINE_DEV(_name, _id) \
static u64 _name##_id##_dma_mask = DMA_BIT_MASK(32); \
static struct platform_device _name##_id##_device = { \
.name = #_name, \
.id = _id, \
.dev = { \
.dma_mask = &_name##_id##_dma_mask, \
.coherent_dma_mask = DMA_BIT_MASK(32), \
}, \
.resource = _name##_id##_resource, \
.num_resources = ARRAY_SIZE(_name##_id##_resource), \
}
#define DEFINE_DEV_DATA(_name, _id) \
static u64 _name##_id##_dma_mask = DMA_BIT_MASK(32); \
static struct platform_device _name##_id##_device = { \
.name = #_name, \
.id = _id, \
.dev = { \
.dma_mask = &_name##_id##_dma_mask, \
.platform_data = &_name##_id##_data, \
.coherent_dma_mask = DMA_BIT_MASK(32), \
}, \
.resource = _name##_id##_resource, \
.num_resources = ARRAY_SIZE(_name##_id##_resource), \
}
#define select_peripheral(port, pin_mask, periph, flags) \
at32_select_periph(GPIO_##port##_BASE, pin_mask, \
GPIO_##periph, flags)
#define DEV_CLK(_name, devname, bus, _index) \
static struct clk devname##_##_name = { \
.name = #_name, \
.dev = &devname##_device.dev, \
.parent = &bus##_clk, \
.mode = bus##_clk_mode, \
.get_rate = bus##_clk_get_rate, \
.index = _index, \
}
static DEFINE_SPINLOCK(pm_lock);
static struct clk osc0;
static struct clk osc1;
static unsigned long osc_get_rate(struct clk *clk)
{
return at32_board_osc_rates[clk->index];
}
static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
{
unsigned long div, mul, rate;
div = PM_BFEXT(PLLDIV, control) + 1;
mul = PM_BFEXT(PLLMUL, control) + 1;
rate = clk->parent->get_rate(clk->parent);
rate = (rate + div / 2) / div;
rate *= mul;
return rate;
}
static long pll_set_rate(struct clk *clk, unsigned long rate,
u32 *pll_ctrl)
{
unsigned long mul;
unsigned long mul_best_fit = 0;
unsigned long div;
unsigned long div_min;
unsigned long div_max;
unsigned long div_best_fit = 0;
unsigned long base;
unsigned long pll_in;
unsigned long actual = 0;
unsigned long rate_error;
unsigned long rate_error_prev = ~0UL;
u32 ctrl;
/* Rate must be between 80 MHz and 200 Mhz. */
if (rate < 80000000UL || rate > 200000000UL)
return -EINVAL;
ctrl = PM_BF(PLLOPT, 4);
base = clk->parent->get_rate(clk->parent);
/* PLL input frequency must be between 6 MHz and 32 MHz. */
div_min = DIV_ROUND_UP(base, 32000000UL);
div_max = base / 6000000UL;
if (div_max < div_min)
return -EINVAL;
for (div = div_min; div <= div_max; div++) {
pll_in = (base + div / 2) / div;
mul = (rate + pll_in / 2) / pll_in;
if (mul == 0)
continue;
actual = pll_in * mul;
rate_error = abs(actual - rate);
if (rate_error < rate_error_prev) {
mul_best_fit = mul;
div_best_fit = div;
rate_error_prev = rate_error;
}
if (rate_error == 0)
break;
}
if (div_best_fit == 0)
return -EINVAL;
ctrl |= PM_BF(PLLMUL, mul_best_fit - 1);
ctrl |= PM_BF(PLLDIV, div_best_fit - 1);
ctrl |= PM_BF(PLLCOUNT, 16);
if (clk->parent == &osc1)
ctrl |= PM_BIT(PLLOSC);
*pll_ctrl = ctrl;
return actual;
}
static unsigned long pll0_get_rate(struct clk *clk)
{
u32 control;
control = pm_readl(PLL0);
return pll_get_rate(clk, control);
}
static void pll1_mode(struct clk *clk, int enabled)
{
unsigned long timeout;
u32 status;
u32 ctrl;
ctrl = pm_readl(PLL1);
if (enabled) {
if (!PM_BFEXT(PLLMUL, ctrl) && !PM_BFEXT(PLLDIV, ctrl)) {
pr_debug("clk %s: failed to enable, rate not set\n",
clk->name);
return;
}
ctrl |= PM_BIT(PLLEN);
pm_writel(PLL1, ctrl);
/* Wait for PLL lock. */
for (timeout = 10000; timeout; timeout--) {
status = pm_readl(ISR);
if (status & PM_BIT(LOCK1))
break;
udelay(10);
}
if (!(status & PM_BIT(LOCK1)))
printk(KERN_ERR "clk %s: timeout waiting for lock\n",
clk->name);
} else {
ctrl &= ~PM_BIT(PLLEN);
pm_writel(PLL1, ctrl);
}
}
static unsigned long pll1_get_rate(struct clk *clk)
{
u32 control;
control = pm_readl(PLL1);
return pll_get_rate(clk, control);
}
static long pll1_set_rate(struct clk *clk, unsigned long rate, int apply)
{
u32 ctrl = 0;
unsigned long actual_rate;
actual_rate = pll_set_rate(clk, rate, &ctrl);
if (apply) {
if (actual_rate != rate)
return -EINVAL;
if (clk->users > 0)
return -EBUSY;
pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n",
clk->name, rate, actual_rate);
pm_writel(PLL1, ctrl);
}
return actual_rate;
}
static int pll1_set_parent(struct clk *clk, struct clk *parent)
{
u32 ctrl;
if (clk->users > 0)
return -EBUSY;
ctrl = pm_readl(PLL1);
WARN_ON(ctrl & PM_BIT(PLLEN));
if (parent == &osc0)
ctrl &= ~PM_BIT(PLLOSC);
else if (parent == &osc1)
ctrl |= PM_BIT(PLLOSC);
else
return -EINVAL;
pm_writel(PLL1, ctrl);
clk->parent = parent;
return 0;
}
/*
* The AT32AP7000 has five primary clock sources: One 32kHz
* oscillator, two crystal oscillators and two PLLs.
*/
static struct clk osc32k = {
.name = "osc32k",
.get_rate = osc_get_rate,
.users = 1,
.index = 0,
};
static struct clk osc0 = {
.name = "osc0",
.get_rate = osc_get_rate,
.users = 1,
.index = 1,
};
static struct clk osc1 = {
.name = "osc1",
.get_rate = osc_get_rate,
.index = 2,
};
static struct clk pll0 = {
.name = "pll0",
.get_rate = pll0_get_rate,
.parent = &osc0,
};
static struct clk pll1 = {
.name = "pll1",
.mode = pll1_mode,
.get_rate = pll1_get_rate,
.set_rate = pll1_set_rate,
.set_parent = pll1_set_parent,
.parent = &osc0,
};
/*
* The main clock can be either osc0 or pll0. The boot loader may
* have chosen one for us, so we don't really know which one until we
* have a look at the SM.
*/
static struct clk *main_clock;
/*
* Synchronous clocks are generated from the main clock. The clocks
* must satisfy the constraint
* fCPU >= fHSB >= fPB
* i.e. each clock must not be faster than its parent.
*/
static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
{
return main_clock->get_rate(main_clock) >> shift;
};
static void cpu_clk_mode(struct clk *clk, int enabled)
{
unsigned long flags;
u32 mask;
spin_lock_irqsave(&pm_lock, flags);
mask = pm_readl(CPU_MASK);
if (enabled)
mask |= 1 << clk->index;
else
mask &= ~(1 << clk->index);
pm_writel(CPU_MASK, mask);
spin_unlock_irqrestore(&pm_lock, flags);
}
static unsigned long cpu_clk_get_rate(struct clk *clk)
{
unsigned long cksel, shift = 0;
cksel = pm_readl(CKSEL);
if (cksel & PM_BIT(CPUDIV))
shift = PM_BFEXT(CPUSEL, cksel) + 1;
return bus_clk_get_rate(clk, shift);
}
static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
{
u32 control;
unsigned long parent_rate, child_div, actual_rate, div;
parent_rate = clk->parent->get_rate(clk->parent);
control = pm_readl(CKSEL);
if (control & PM_BIT(HSBDIV))
child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
else
child_div = 1;
if (rate > 3 * (parent_rate / 4) || child_div == 1) {
actual_rate = parent_rate;
control &= ~PM_BIT(CPUDIV);
} else {
unsigned int cpusel;
div = (parent_rate + rate / 2) / rate;
if (div > child_div)
div = child_div;
cpusel = (div > 1) ? (fls(div) - 2) : 0;
control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
actual_rate = parent_rate / (1 << (cpusel + 1));
}
pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
clk->name, rate, actual_rate);
if (apply)
pm_writel(CKSEL, control);
return actual_rate;
}
static void hsb_clk_mode(struct clk *clk, int enabled)
{
unsigned long flags;
u32 mask;
spin_lock_irqsave(&pm_lock, flags);
mask = pm_readl(HSB_MASK);
if (enabled)
mask |= 1 << clk->index;
else
mask &= ~(1 << clk->index);
pm_writel(HSB_MASK, mask);
spin_unlock_irqrestore(&pm_lock, flags);
}
static unsigned long hsb_clk_get_rate(struct clk *clk)
{
unsigned long cksel, shift = 0;
cksel = pm_readl(CKSEL);
if (cksel & PM_BIT(HSBDIV))
shift = PM_BFEXT(HSBSEL, cksel) + 1;
return bus_clk_get_rate(clk, shift);
}
void pba_clk_mode(struct clk *clk, int enabled)
{
unsigned long flags;
u32 mask;
spin_lock_irqsave(&pm_lock, flags);
mask = pm_readl(PBA_MASK);
if (enabled)
mask |= 1 << clk->index;
else
mask &= ~(1 << clk->index);
pm_writel(PBA_MASK, mask);
spin_unlock_irqrestore(&pm_lock, flags);
}
unsigned long pba_clk_get_rate(struct clk *clk)
{
unsigned long cksel, shift = 0;
cksel = pm_readl(CKSEL);
if (cksel & PM_BIT(PBADIV))
shift = PM_BFEXT(PBASEL, cksel) + 1;
return bus_clk_get_rate(clk, shift);
}
static void pbb_clk_mode(struct clk *clk, int enabled)
{
unsigned long flags;
u32 mask;
spin_lock_irqsave(&pm_lock, flags);
mask = pm_readl(PBB_MASK);
if (enabled)
mask |= 1 << clk->index;
else
mask &= ~(1 << clk->index);
pm_writel(PBB_MASK, mask);
spin_unlock_irqrestore(&pm_lock, flags);
}
static unsigned long pbb_clk_get_rate(struct clk *clk)
{
unsigned long cksel, shift = 0;
cksel = pm_readl(CKSEL);
if (cksel & PM_BIT(PBBDIV))
shift = PM_BFEXT(PBBSEL, cksel) + 1;
return bus_clk_get_rate(clk, shift);
}
static struct clk cpu_clk = {
.name = "cpu",
.get_rate = cpu_clk_get_rate,
.set_rate = cpu_clk_set_rate,
.users = 1,
};
static struct clk hsb_clk = {
.name = "hsb",
.parent = &cpu_clk,
.get_rate = hsb_clk_get_rate,
};
static struct clk pba_clk = {
.name = "pba",
.parent = &hsb_clk,
.mode = hsb_clk_mode,
.get_rate = pba_clk_get_rate,
.index = 1,
};
static struct clk pbb_clk = {
.name = "pbb",
.parent = &hsb_clk,
.mode = hsb_clk_mode,
.get_rate = pbb_clk_get_rate,
.users = 1,
.index = 2,
};
/* --------------------------------------------------------------------
* Generic Clock operations
* -------------------------------------------------------------------- */
static void genclk_mode(struct clk *clk, int enabled)
{
u32 control;
control = pm_readl(GCCTRL(clk->index));
if (enabled)
control |= PM_BIT(CEN);
else
control &= ~PM_BIT(CEN);
pm_writel(GCCTRL(clk->index), control);
}
static unsigned long genclk_get_rate(struct clk *clk)
{
u32 control;
unsigned long div = 1;
control = pm_readl(GCCTRL(clk->index));
if (control & PM_BIT(DIVEN))
div = 2 * (PM_BFEXT(DIV, control) + 1);
return clk->parent->get_rate(clk->parent) / div;
}
static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
{
u32 control;
unsigned long parent_rate, actual_rate, div;
parent_rate = clk->parent->get_rate(clk->parent);
control = pm_readl(GCCTRL(clk->index));
if (rate > 3 * parent_rate / 4) {
actual_rate = parent_rate;
control &= ~PM_BIT(DIVEN);
} else {
div = (parent_rate + rate) / (2 * rate) - 1;
control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
actual_rate = parent_rate / (2 * (div + 1));
}
dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
clk->name, rate, actual_rate);
if (apply)
pm_writel(GCCTRL(clk->index), control);
return actual_rate;
}
int genclk_set_parent(struct clk *clk, struct clk *parent)
{
u32 control;
dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
clk->name, parent->name, clk->parent->name);
control = pm_readl(GCCTRL(clk->index));
if (parent == &osc1 || parent == &pll1)
control |= PM_BIT(OSCSEL);
else if (parent == &osc0 || parent == &pll0)
control &= ~PM_BIT(OSCSEL);
else
return -EINVAL;
if (parent == &pll0 || parent == &pll1)
control |= PM_BIT(PLLSEL);
else
control &= ~PM_BIT(PLLSEL);
pm_writel(GCCTRL(clk->index), control);
clk->parent = parent;
return 0;
}
static void __init genclk_init_parent(struct clk *clk)
{
u32 control;
struct clk *parent;
BUG_ON(clk->index > 7);
control = pm_readl(GCCTRL(clk->index));
if (control & PM_BIT(OSCSEL))
parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
else
parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
clk->parent = parent;
}
static struct dw_dma_platform_data dw_dmac0_data = {
.nr_channels = 3,
};
static struct resource dw_dmac0_resource[] = {
PBMEM(0xff200000),
IRQ(2),
};
DEFINE_DEV_DATA(dw_dmac, 0);
DEV_CLK(hclk, dw_dmac0, hsb, 10);
/* --------------------------------------------------------------------
* System peripherals
* -------------------------------------------------------------------- */
static struct resource at32_pm0_resource[] = {
{
.start = 0xfff00000,
.end = 0xfff0007f,
.flags = IORESOURCE_MEM,
},
IRQ(20),
};
static struct resource at32ap700x_rtc0_resource[] = {
{
.start = 0xfff00080,
.end = 0xfff000af,
.flags = IORESOURCE_MEM,
},
IRQ(21),
};
static struct resource at32_wdt0_resource[] = {
{
.start = 0xfff000b0,
.end = 0xfff000cf,
.flags = IORESOURCE_MEM,
},
};
static struct resource at32_eic0_resource[] = {
{
.start = 0xfff00100,
.end = 0xfff0013f,
.flags = IORESOURCE_MEM,
},
IRQ(19),
};
DEFINE_DEV(at32_pm, 0);
DEFINE_DEV(at32ap700x_rtc, 0);
DEFINE_DEV(at32_wdt, 0);
DEFINE_DEV(at32_eic, 0);
/*
* Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
* is always running.
*/
static struct clk at32_pm_pclk = {
.name = "pclk",
.dev = &at32_pm0_device.dev,
.parent = &pbb_clk,
.mode = pbb_clk_mode,
.get_rate = pbb_clk_get_rate,
.users = 1,
.index = 0,
};
static struct resource intc0_resource[] = {
PBMEM(0xfff00400),
};
struct platform_device at32_intc0_device = {
.name = "intc",
.id = 0,
.resource = intc0_resource,
.num_resources = ARRAY_SIZE(intc0_resource),
};
DEV_CLK(pclk, at32_intc0, pbb, 1);
static struct clk ebi_clk = {
.name = "ebi",
.parent = &hsb_clk,
.mode = hsb_clk_mode,
.get_rate = hsb_clk_get_rate,
.users = 1,
};
static struct clk hramc_clk = {
.name = "hramc",
.parent = &hsb_clk,
.mode = hsb_clk_mode,
.get_rate = hsb_clk_get_rate,
.users = 1,
.index = 3,
};
static struct clk sdramc_clk = {
.name = "sdramc_clk",
.parent = &pbb_clk,
.mode = pbb_clk_mode,
.get_rate = pbb_clk_get_rate,
.users = 1,
.index = 14,
};
static struct resource smc0_resource[] = {
PBMEM(0xfff03400),
};
DEFINE_DEV(smc, 0);
DEV_CLK(pclk, smc0, pbb, 13);
DEV_CLK(mck, smc0, hsb, 0);
static struct platform_device pdc_device = {
.name = "pdc",
.id = 0,
};
DEV_CLK(hclk, pdc, hsb, 4);
DEV_CLK(pclk, pdc, pba, 16);
static struct clk pico_clk = {
.name = "pico",
.parent = &cpu_clk,
.mode = cpu_clk_mode,
.get_rate = cpu_clk_get_rate,
.users = 1,
};
/* --------------------------------------------------------------------
* HMATRIX
* -------------------------------------------------------------------- */
struct clk at32_hmatrix_clk = {
.name = "hmatrix_clk",
.parent = &pbb_clk,
.mode = pbb_clk_mode,
.get_rate = pbb_clk_get_rate,
.index = 2,
.users = 1,
};
/*
* Set bits in the HMATRIX Special Function Register (SFR) used by the
* External Bus Interface (EBI). This can be used to enable special
* features like CompactFlash support, NAND Flash support, etc. on
* certain chipselects.
*/
static inline void set_ebi_sfr_bits(u32 mask)
{
hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, mask);
}
/* --------------------------------------------------------------------
* Timer/Counter (TC)
* -------------------------------------------------------------------- */
static struct resource at32_tcb0_resource[] = {
PBMEM(0xfff00c00),
IRQ(22),
};
static struct platform_device at32_tcb0_device = {
.name = "atmel_tcb",
.id = 0,
.resource = at32_tcb0_resource,
.num_resources = ARRAY_SIZE(at32_tcb0_resource),
};
DEV_CLK(t0_clk, at32_tcb0, pbb, 3);
static struct resource at32_tcb1_resource[] = {
PBMEM(0xfff01000),
IRQ(23),
};
static struct platform_device at32_tcb1_device = {
.name = "atmel_tcb",
.id = 1,
.resource = at32_tcb1_resource,
.num_resources = ARRAY_SIZE(at32_tcb1_resource),
};
DEV_CLK(t0_clk, at32_tcb1, pbb, 4);
/* --------------------------------------------------------------------
* PIO
* -------------------------------------------------------------------- */
static struct resource pio0_resource[] = {
PBMEM(0xffe02800),
IRQ(13),
};
DEFINE_DEV(pio, 0);
DEV_CLK(mck, pio0, pba, 10);
static struct resource pio1_resource[] = {
PBMEM(0xffe02c00),
IRQ(14),
};
DEFINE_DEV(pio, 1);
DEV_CLK(mck, pio1, pba, 11);
static struct resource pio2_resource[] = {
PBMEM(0xffe03000),
IRQ(15),
};
DEFINE_DEV(pio, 2);
DEV_CLK(mck, pio2, pba, 12);
static struct resource pio3_resource[] = {
PBMEM(0xffe03400),
IRQ(16),
};
DEFINE_DEV(pio, 3);
DEV_CLK(mck, pio3, pba, 13);
static struct resource pio4_resource[] = {
PBMEM(0xffe03800),
IRQ(17),
};
DEFINE_DEV(pio, 4);
DEV_CLK(mck, pio4, pba, 14);
static int __init system_device_init(void)
{
platform_device_register(&at32_pm0_device);
platform_device_register(&at32_intc0_device);
platform_device_register(&at32ap700x_rtc0_device);
platform_device_register(&at32_wdt0_device);
platform_device_register(&at32_eic0_device);
platform_device_register(&smc0_device);
platform_device_register(&pdc_device);
platform_device_register(&dw_dmac0_device);
platform_device_register(&at32_tcb0_device);
platform_device_register(&at32_tcb1_device);
platform_device_register(&pio0_device);
platform_device_register(&pio1_device);
platform_device_register(&pio2_device);
platform_device_register(&pio3_device);
platform_device_register(&pio4_device);
return 0;
}
core_initcall(system_device_init);
/* --------------------------------------------------------------------
* PSIF
* -------------------------------------------------------------------- */
static struct resource atmel_psif0_resource[] __initdata = {
{
.start = 0xffe03c00,
.end = 0xffe03cff,
.flags = IORESOURCE_MEM,
},
IRQ(18),
};
static struct clk atmel_psif0_pclk = {
.name = "pclk",
.parent = &pba_clk,
.mode = pba_clk_mode,
.get_rate = pba_clk_get_rate,
.index = 15,
};
static struct resource atmel_psif1_resource[] __initdata = {
{
.start = 0xffe03d00,
.end = 0xffe03dff,
.flags = IORESOURCE_MEM,
},
IRQ(18),
};
static struct clk atmel_psif1_pclk = {
.name = "pclk",
.parent = &pba_clk,
.mode = pba_clk_mode,
.get_rate = pba_clk_get_rate,
.index = 15,
};
struct platform_device *__init at32_add_device_psif(unsigned int id)
{
struct platform_device *pdev;
u32 pin_mask;
if (!(id == 0 || id == 1))
return NULL;
pdev = platform_device_alloc("atmel_psif", id);
if (!pdev)
return NULL;
switch (id) {
case 0:
pin_mask = (1 << 8) | (1 << 9); /* CLOCK & DATA */
if (platform_device_add_resources(pdev, atmel_psif0_resource,
ARRAY_SIZE(atmel_psif0_resource)))
goto err_add_resources;
atmel_psif0_pclk.dev = &pdev->dev;
select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
break;
case 1:
pin_mask = (1 << 11) | (1 << 12); /* CLOCK & DATA */
if (platform_device_add_resources(pdev, atmel_psif1_resource,
ARRAY_SIZE(atmel_psif1_resource)))
goto err_add_resources;
atmel_psif1_pclk.dev = &pdev->dev;
select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
break;
default:
return NULL;
}
platform_device_add(pdev);
return pdev;
err_add_resources:
platform_device_put(pdev);
return NULL;
}
/* --------------------------------------------------------------------
* USART
* -------------------------------------------------------------------- */
static struct atmel_uart_data atmel_usart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static struct resource atmel_usart0_resource[] = {
PBMEM(0xffe00c00),
IRQ(6),
};
DEFINE_DEV_DATA(atmel_usart, 0);
DEV_CLK(usart, atmel_usart0, pba, 3);
static struct atmel_uart_data atmel_usart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static struct resource atmel_usart1_resource[] = {
PBMEM(0xffe01000),
IRQ(7),
};
DEFINE_DEV_DATA(atmel_usart, 1);
DEV_CLK(usart, atmel_usart1, pba, 4);
static struct atmel_uart_data atmel_usart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static struct resource atmel_usart2_resource[] = {
PBMEM(0xffe01400),
IRQ(8),
};
DEFINE_DEV_DATA(atmel_usart, 2);
DEV_CLK(usart, atmel_usart2, pba, 5);
static struct atmel_uart_data atmel_usart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static struct resource atmel_usart3_resource[] = {
PBMEM(0xffe01800),
IRQ(9),
};
DEFINE_DEV_DATA(atmel_usart, 3);
DEV_CLK(usart, atmel_usart3, pba, 6);
static inline void configure_usart0_pins(int flags)
{
u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 6);
if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 7);
if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 10);
select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static inline void configure_usart1_pins(int flags)
{
u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 19);
if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 20);
if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 16);
select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
}
static inline void configure_usart2_pins(int flags)
{
u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 30);
if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 29);
if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 28);
select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static inline void configure_usart3_pins(int flags)
{
u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 16);
if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 15);
if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 19);
select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static struct platform_device *__initdata at32_usarts[4];
void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
{
struct platform_device *pdev;
switch (hw_id) {
case 0:
pdev = &atmel_usart0_device;
configure_usart0_pins(flags);
break;
case 1:
pdev = &atmel_usart1_device;
configure_usart1_pins(flags);
break;
case 2:
pdev = &atmel_usart2_device;
configure_usart2_pins(flags);
break;
case 3:
pdev = &atmel_usart3_device;
configure_usart3_pins(flags);
break;
default:
return;
}
if (PXSEG(pdev->resource[0].start) == P4SEG) {
/* Addresses in the P4 segment are permanently mapped 1:1 */
struct atmel_uart_data *data = pdev->dev.platform_data;
data->regs = (void __iomem *)pdev->resource[0].start;
}
pdev->id = line;
at32_usarts[line] = pdev;
}
struct platform_device *__init at32_add_device_usart(unsigned int id)
{
platform_device_register(at32_usarts[id]);
return at32_usarts[id];
}
struct platform_device *atmel_default_console_device;
void __init at32_setup_serial_console(unsigned int usart_id)
{
atmel_default_console_device = at32_usarts[usart_id];
}
/* --------------------------------------------------------------------
* Ethernet
* -------------------------------------------------------------------- */
#ifdef CONFIG_CPU_AT32AP7000
static struct eth_platform_data macb0_data;
static struct resource macb0_resource[] = {
PBMEM(0xfff01800),
IRQ(25),
};
DEFINE_DEV_DATA(macb, 0);
DEV_CLK(hclk, macb0, hsb, 8);
DEV_CLK(pclk, macb0, pbb, 6);
static struct eth_platform_data macb1_data;
static struct resource macb1_resource[] = {
PBMEM(0xfff01c00),
IRQ(26),
};
DEFINE_DEV_DATA(macb, 1);
DEV_CLK(hclk, macb1, hsb, 9);
DEV_CLK(pclk, macb1, pbb, 7);
struct platform_device *__init
at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
{
struct platform_device *pdev;
u32 pin_mask;
switch (id) {
case 0:
pdev = &macb0_device;
pin_mask = (1 << 3); /* TXD0 */
pin_mask |= (1 << 4); /* TXD1 */
pin_mask |= (1 << 7); /* TXEN */
pin_mask |= (1 << 8); /* TXCK */
pin_mask |= (1 << 9); /* RXD0 */
pin_mask |= (1 << 10); /* RXD1 */
pin_mask |= (1 << 13); /* RXER */
pin_mask |= (1 << 15); /* RXDV */
pin_mask |= (1 << 16); /* MDC */
pin_mask |= (1 << 17); /* MDIO */
if (!data->is_rmii) {
pin_mask |= (1 << 0); /* COL */
pin_mask |= (1 << 1); /* CRS */
pin_mask |= (1 << 2); /* TXER */
pin_mask |= (1 << 5); /* TXD2 */
pin_mask |= (1 << 6); /* TXD3 */
pin_mask |= (1 << 11); /* RXD2 */
pin_mask |= (1 << 12); /* RXD3 */
pin_mask |= (1 << 14); /* RXCK */
#ifndef CONFIG_BOARD_MIMC200
pin_mask |= (1 << 18); /* SPD */
#endif
}
select_peripheral(PIOC, pin_mask, PERIPH_A, 0);
break;
case 1:
pdev = &macb1_device;
pin_mask = (1 << 13); /* TXD0 */
pin_mask |= (1 << 14); /* TXD1 */
pin_mask |= (1 << 11); /* TXEN */
pin_mask |= (1 << 12); /* TXCK */
pin_mask |= (1 << 10); /* RXD0 */
pin_mask |= (1 << 6); /* RXD1 */
pin_mask |= (1 << 5); /* RXER */
pin_mask |= (1 << 4); /* RXDV */
pin_mask |= (1 << 3); /* MDC */
pin_mask |= (1 << 2); /* MDIO */
#ifndef CONFIG_BOARD_MIMC200
if (!data->is_rmii)
pin_mask |= (1 << 15); /* SPD */
#endif
select_peripheral(PIOD, pin_mask, PERIPH_B, 0);
if (!data->is_rmii) {
pin_mask = (1 << 19); /* COL */
pin_mask |= (1 << 23); /* CRS */
pin_mask |= (1 << 26); /* TXER */
pin_mask |= (1 << 27); /* TXD2 */
pin_mask |= (1 << 28); /* TXD3 */
pin_mask |= (1 << 29); /* RXD2 */
pin_mask |= (1 << 30); /* RXD3 */
pin_mask |= (1 << 24); /* RXCK */
select_peripheral(PIOC, pin_mask, PERIPH_B, 0);
}
break;
default:
return NULL;
}
memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
platform_device_register(pdev);
return pdev;
}
#endif
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
static struct resource atmel_spi0_resource[] = {
PBMEM(0xffe00000),
IRQ(3),
};
DEFINE_DEV(atmel_spi, 0);
DEV_CLK(spi_clk, atmel_spi0, pba, 0);
static struct resource atmel_spi1_resource[] = {
PBMEM(0xffe00400),
IRQ(4),
};
DEFINE_DEV(atmel_spi, 1);
DEV_CLK(spi_clk, atmel_spi1, pba, 1);
void __init
at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, unsigned int n)
{
/*
* Manage the chipselects as GPIOs, normally using the same pins
* the SPI controller expects; but boards can use other pins.
*/
static u8 __initdata spi_pins[][4] = {
{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
GPIO_PIN_PA(5), GPIO_PIN_PA(20) },
{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
GPIO_PIN_PB(4), GPIO_PIN_PA(27) },
};
unsigned int pin, mode;
/* There are only 2 SPI controllers */
if (bus_num > 1)
return;
for (; n; n--, b++) {
b->bus_num = bus_num;
if (b->chip_select >= 4)
continue;
pin = (unsigned)b->controller_data;
if (!pin) {
pin = spi_pins[bus_num][b->chip_select];
b->controller_data = (void *)pin;
}
mode = AT32_GPIOF_OUTPUT;
if (!(b->mode & SPI_CS_HIGH))
mode |= AT32_GPIOF_HIGH;
at32_select_gpio(pin, mode);
}
}
struct platform_device *__init
at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
{
struct platform_device *pdev;
u32 pin_mask;
switch (id) {
case 0:
pdev = &atmel_spi0_device;
pin_mask = (1 << 1) | (1 << 2); /* MOSI & SCK */
/* pullup MISO so a level is always defined */
select_peripheral(PIOA, (1 << 0), PERIPH_A, AT32_GPIOF_PULLUP);
select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
at32_spi_setup_slaves(0, b, n);
break;
case 1:
pdev = &atmel_spi1_device;
pin_mask = (1 << 1) | (1 << 5); /* MOSI */
/* pullup MISO so a level is always defined */
select_peripheral(PIOB, (1 << 0), PERIPH_B, AT32_GPIOF_PULLUP);
select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
at32_spi_setup_slaves(1, b, n);
break;
default:
return NULL;
}
spi_register_board_info(b, n);
platform_device_register(pdev);
return pdev;
}
/* --------------------------------------------------------------------
* TWI
* -------------------------------------------------------------------- */
static struct resource atmel_twi0_resource[] __initdata = {
PBMEM(0xffe00800),
IRQ(5),
};
static struct clk atmel_twi0_pclk = {
.name = "twi_pclk",
.parent = &pba_clk,
.mode = pba_clk_mode,
.get_rate = pba_clk_get_rate,
.index = 2,
};
struct platform_device *__init at32_add_device_twi(unsigned int id,
struct i2c_board_info *b,
unsigned int n)
{
struct platform_device *pdev;
u32 pin_mask;
if (id != 0)
return NULL;
pdev = platform_device_alloc("atmel_twi", id);
if (!pdev)
return NULL;
if (platform_device_add_resources(pdev, atmel_twi0_resource,
ARRAY_SIZE(atmel_twi0_resource)))
goto err_add_resources;
pin_mask = (1 << 6) | (1 << 7); /* SDA & SDL */
select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
atmel_twi0_pclk.dev = &pdev->dev;
if (b)
i2c_register_board_info(id, b, n);
platform_device_add(pdev);
return pdev;
err_add_resources:
platform_device_put(pdev);
return NULL;
}
/* --------------------------------------------------------------------
* MMC
* -------------------------------------------------------------------- */
static struct resource atmel_mci0_resource[] __initdata = {
PBMEM(0xfff02400),
IRQ(28),
};
static struct clk atmel_mci0_pclk = {
.name = "mci_clk",
.parent = &pbb_clk,
.mode = pbb_clk_mode,
.get_rate = pbb_clk_get_rate,
.index = 9,
};
struct platform_device *__init
at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
{
struct platform_device *pdev;
struct mci_dma_data *slave;
u32 pioa_mask;
u32 piob_mask;
if (id != 0 || !data)
return NULL;
/* Must have at least one usable slot */
if (!data->slot[0].bus_width && !data->slot[1].bus_width)
return NULL;
pdev = platform_device_alloc("atmel_mci", id);
if (!pdev)
goto fail;
if (platform_device_add_resources(pdev, atmel_mci0_resource,
ARRAY_SIZE(atmel_mci0_resource)))
goto fail;
slave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
if (!slave)
goto fail;
slave->sdata.dma_dev = &dw_dmac0_device.dev;
slave->sdata.reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
slave->sdata.cfg_hi = (DWC_CFGH_SRC_PER(0)
| DWC_CFGH_DST_PER(1));
slave->sdata.cfg_lo &= ~(DWC_CFGL_HS_DST_POL
| DWC_CFGL_HS_SRC_POL);
data->dma_slave = slave;
if (platform_device_add_data(pdev, data,
sizeof(struct mci_platform_data)))
goto fail_free;
/* CLK line is common to both slots */
pioa_mask = 1 << 10;
switch (data->slot[0].bus_width) {
case 4:
pioa_mask |= 1 << 13; /* DATA1 */
pioa_mask |= 1 << 14; /* DATA2 */
pioa_mask |= 1 << 15; /* DATA3 */
/* fall through */
case 1:
pioa_mask |= 1 << 11; /* CMD */
pioa_mask |= 1 << 12; /* DATA0 */
if (gpio_is_valid(data->slot[0].detect_pin))
at32_select_gpio(data->slot[0].detect_pin, 0);
if (gpio_is_valid(data->slot[0].wp_pin))
at32_select_gpio(data->slot[0].wp_pin, 0);
break;
case 0:
/* Slot is unused */
break;
default:
goto fail_free;
}
select_peripheral(PIOA, pioa_mask, PERIPH_A, 0);
piob_mask = 0;
switch (data->slot[1].bus_width) {
case 4:
piob_mask |= 1 << 8; /* DATA1 */
piob_mask |= 1 << 9; /* DATA2 */
piob_mask |= 1 << 10; /* DATA3 */
/* fall through */
case 1:
piob_mask |= 1 << 6; /* CMD */
piob_mask |= 1 << 7; /* DATA0 */
select_peripheral(PIOB, piob_mask, PERIPH_B, 0);
if (gpio_is_valid(data->slot[1].detect_pin))
at32_select_gpio(data->slot[1].detect_pin, 0);
if (gpio_is_valid(data->slot[1].wp_pin))
at32_select_gpio(data->slot[1].wp_pin, 0);
break;
case 0:
/* Slot is unused */
break;
default:
if (!data->slot[0].bus_width)
goto fail_free;
data->slot[1].bus_width = 0;
break;
}
atmel_mci0_pclk.dev = &pdev->dev;
platform_device_add(pdev);
return pdev;
fail_free:
kfree(slave);
fail:
data->dma_slave = NULL;
platform_device_put(pdev);
return NULL;
}
/* --------------------------------------------------------------------
* LCDC
* -------------------------------------------------------------------- */
#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
static struct atmel_lcdfb_info atmel_lcdfb0_data;
static struct resource atmel_lcdfb0_resource[] = {
{
.start = 0xff000000,
.end = 0xff000fff,
.flags = IORESOURCE_MEM,
},
IRQ(1),
{
/* Placeholder for pre-allocated fb memory */
.start = 0x00000000,
.end = 0x00000000,
.flags = 0,
},
};
DEFINE_DEV_DATA(atmel_lcdfb, 0);
DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
static struct clk atmel_lcdfb0_pixclk = {
.name = "lcdc_clk",
.dev = &atmel_lcdfb0_device.dev,
.mode = genclk_mode,
.get_rate = genclk_get_rate,
.set_rate = genclk_set_rate,
.set_parent = genclk_set_parent,
.index = 7,
};
struct platform_device *__init
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
unsigned long fbmem_start, unsigned long fbmem_len,
u64 pin_mask)
{
struct platform_device *pdev;
struct atmel_lcdfb_info *info;
struct fb_monspecs *monspecs;
struct fb_videomode *modedb;
unsigned int modedb_size;
u32 portc_mask, portd_mask, porte_mask;
/*
* Do a deep copy of the fb data, monspecs and modedb. Make
* sure all allocations are done before setting up the
* portmux.
*/
monspecs = kmemdup(data->default_monspecs,
sizeof(struct fb_monspecs), GFP_KERNEL);
if (!monspecs)
return NULL;
modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
if (!modedb)
goto err_dup_modedb;
monspecs->modedb = modedb;
switch (id) {
case 0:
pdev = &atmel_lcdfb0_device;
if (pin_mask == 0ULL)
/* Default to "full" lcdc control signals and 24bit */
pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL;
/* LCDC on port C */
portc_mask = pin_mask & 0xfff80000;
select_peripheral(PIOC, portc_mask, PERIPH_A, 0);
/* LCDC on port D */
portd_mask = pin_mask & 0x0003ffff;
select_peripheral(PIOD, portd_mask, PERIPH_A, 0);
/* LCDC on port E */
porte_mask = (pin_mask >> 32) & 0x0007ffff;
select_peripheral(PIOE, porte_mask, PERIPH_B, 0);
clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
break;
default:
goto err_invalid_id;
}
if (fbmem_len) {
pdev->resource[2].start = fbmem_start;
pdev->resource[2].end = fbmem_start + fbmem_len - 1;
pdev->resource[2].flags = IORESOURCE_MEM;
}
info = pdev->dev.platform_data;
memcpy(info, data, sizeof(struct atmel_lcdfb_info));
info->default_monspecs = monspecs;
platform_device_register(pdev);
return pdev;
err_invalid_id:
kfree(modedb);
err_dup_modedb:
kfree(monspecs);
return NULL;
}
#endif
/* --------------------------------------------------------------------
* PWM
* -------------------------------------------------------------------- */
static struct resource atmel_pwm0_resource[] __initdata = {
PBMEM(0xfff01400),
IRQ(24),
};
static struct clk atmel_pwm0_mck = {
.name = "pwm_clk",
.parent = &pbb_clk,
.mode = pbb_clk_mode,
.get_rate = pbb_clk_get_rate,
.index = 5,
};
struct platform_device *__init at32_add_device_pwm(u32 mask)
{
struct platform_device *pdev;
u32 pin_mask;
if (!mask)
return NULL;
pdev = platform_device_alloc("atmel_pwm", 0);
if (!pdev)
return NULL;
if (platform_device_add_resources(pdev, atmel_pwm0_resource,
ARRAY_SIZE(atmel_pwm0_resource)))
goto out_free_pdev;
if (platform_device_add_data(pdev, &mask, sizeof(mask)))
goto out_free_pdev;
pin_mask = 0;
if (mask & (1 << 0))
pin_mask |= (1 << 28);
if (mask & (1 << 1))
pin_mask |= (1 << 29);
if (pin_mask > 0)
select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
pin_mask = 0;
if (mask & (1 << 2))
pin_mask |= (1 << 21);
if (mask & (1 << 3))
pin_mask |= (1 << 22);
if (pin_mask > 0)
select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
atmel_pwm0_mck.dev = &pdev->dev;
platform_device_add(pdev);
return pdev;
out_free_pdev:
platform_device_put(pdev);
return NULL;
}
/* --------------------------------------------------------------------
* SSC
* -------------------------------------------------------------------- */
static struct resource ssc0_resource[] = {
PBMEM(0xffe01c00),
IRQ(10),
};
DEFINE_DEV(ssc, 0);
DEV_CLK(pclk, ssc0, pba, 7);
static struct resource ssc1_resource[] = {
PBMEM(0xffe02000),
IRQ(11),
};
DEFINE_DEV(ssc, 1);
DEV_CLK(pclk, ssc1, pba, 8);
static struct resource ssc2_resource[] = {
PBMEM(0xffe02400),
IRQ(12),
};
DEFINE_DEV(ssc, 2);
DEV_CLK(pclk, ssc2, pba, 9);
struct platform_device *__init
at32_add_device_ssc(unsigned int id, unsigned int flags)
{
struct platform_device *pdev;
u32 pin_mask = 0;
switch (id) {
case 0:
pdev = &ssc0_device;
if (flags & ATMEL_SSC_RF)
pin_mask |= (1 << 21); /* RF */
if (flags & ATMEL_SSC_RK)
pin_mask |= (1 << 22); /* RK */
if (flags & ATMEL_SSC_TK)
pin_mask |= (1 << 23); /* TK */
if (flags & ATMEL_SSC_TF)
pin_mask |= (1 << 24); /* TF */
if (flags & ATMEL_SSC_TD)
pin_mask |= (1 << 25); /* TD */
if (flags & ATMEL_SSC_RD)
pin_mask |= (1 << 26); /* RD */
if (pin_mask > 0)
select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
break;
case 1:
pdev = &ssc1_device;
if (flags & ATMEL_SSC_RF)
pin_mask |= (1 << 0); /* RF */
if (flags & ATMEL_SSC_RK)
pin_mask |= (1 << 1); /* RK */
if (flags & ATMEL_SSC_TK)
pin_mask |= (1 << 2); /* TK */
if (flags & ATMEL_SSC_TF)
pin_mask |= (1 << 3); /* TF */
if (flags & ATMEL_SSC_TD)
pin_mask |= (1 << 4); /* TD */
if (flags & ATMEL_SSC_RD)
pin_mask |= (1 << 5); /* RD */
if (pin_mask > 0)
select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
break;
case 2:
pdev = &ssc2_device;
if (flags & ATMEL_SSC_TD)
pin_mask |= (1 << 13); /* TD */
if (flags & ATMEL_SSC_RD)
pin_mask |= (1 << 14); /* RD */
if (flags & ATMEL_SSC_TK)
pin_mask |= (1 << 15); /* TK */
if (flags & ATMEL_SSC_TF)
pin_mask |= (1 << 16); /* TF */
if (flags & ATMEL_SSC_RF)
pin_mask |= (1 << 17); /* RF */
if (flags & ATMEL_SSC_RK)
pin_mask |= (1 << 18); /* RK */
if (pin_mask > 0)
select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
break;
default:
return NULL;
}
platform_device_register(pdev);
return pdev;
}
/* --------------------------------------------------------------------
* USB Device Controller
* -------------------------------------------------------------------- */
static struct resource usba0_resource[] __initdata = {
{
.start = 0xff300000,
.end = 0xff3fffff,
.flags = IORESOURCE_MEM,
}, {
.start = 0xfff03000,
.end = 0xfff033ff,
.flags = IORESOURCE_MEM,
},
IRQ(31),
};
static struct clk usba0_pclk = {
.name = "pclk",
.parent = &pbb_clk,
.mode = pbb_clk_mode,
.get_rate = pbb_clk_get_rate,
.index = 12,
};
static struct clk usba0_hclk = {
.name = "hclk",
.parent = &hsb_clk,
.mode = hsb_clk_mode,
.get_rate = hsb_clk_get_rate,
.index = 6,
};
#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
[idx] = { \
.name = nam, \
.index = idx, \
.fifo_size = maxpkt, \
.nr_banks = maxbk, \
.can_dma = dma, \
.can_isoc = isoc, \
}
static struct usba_ep_data at32_usba_ep[] __initdata = {
EP("ep0", 0, 64, 1, 0, 0),
EP("ep1", 1, 512, 2, 1, 1),
EP("ep2", 2, 512, 2, 1, 1),
EP("ep3-int", 3, 64, 3, 1, 0),
EP("ep4-int", 4, 64, 3, 1, 0),
EP("ep5", 5, 1024, 3, 1, 1),
EP("ep6", 6, 1024, 3, 1, 1),
};
#undef EP
struct platform_device *__init
at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
{
/*
* pdata doesn't have room for any endpoints, so we need to
* append room for the ones we need right after it.
*/
struct {
struct usba_platform_data pdata;
struct usba_ep_data ep[7];
} usba_data;
struct platform_device *pdev;
if (id != 0)
return NULL;
pdev = platform_device_alloc("atmel_usba_udc", 0);
if (!pdev)
return NULL;
if (platform_device_add_resources(pdev, usba0_resource,
ARRAY_SIZE(usba0_resource)))
goto out_free_pdev;
if (data) {
usba_data.pdata.vbus_pin = data->vbus_pin;
usba_data.pdata.vbus_pin_inverted = data->vbus_pin_inverted;
} else {
usba_data.pdata.vbus_pin = -EINVAL;
usba_data.pdata.vbus_pin_inverted = -EINVAL;
}
data = &usba_data.pdata;
data->num_ep = ARRAY_SIZE(at32_usba_ep);
memcpy(data->ep, at32_usba_ep, sizeof(at32_usba_ep));
if (platform_device_add_data(pdev, data, sizeof(usba_data)))
goto out_free_pdev;
if (gpio_is_valid(data->vbus_pin))
at32_select_gpio(data->vbus_pin, 0);
usba0_pclk.dev = &pdev->dev;
usba0_hclk.dev = &pdev->dev;
platform_device_add(pdev);
return pdev;
out_free_pdev:
platform_device_put(pdev);
return NULL;
}
/* --------------------------------------------------------------------
* IDE / CompactFlash
* -------------------------------------------------------------------- */
#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
static struct resource at32_smc_cs4_resource[] __initdata = {
{
.start = 0x04000000,
.end = 0x07ffffff,
.flags = IORESOURCE_MEM,
},
IRQ(~0UL), /* Magic IRQ will be overridden */
};
static struct resource at32_smc_cs5_resource[] __initdata = {
{
.start = 0x20000000,
.end = 0x23ffffff,
.flags = IORESOURCE_MEM,
},
IRQ(~0UL), /* Magic IRQ will be overridden */
};
static int __init at32_init_ide_or_cf(struct platform_device *pdev,
unsigned int cs, unsigned int extint)
{
static unsigned int extint_pin_map[4] __initdata = {
(1 << 25),
(1 << 26),
(1 << 27),
(1 << 28),
};
static bool common_pins_initialized __initdata = false;
unsigned int extint_pin;
int ret;
u32 pin_mask;
if (extint >= ARRAY_SIZE(extint_pin_map))
return -EINVAL;
extint_pin = extint_pin_map[extint];
switch (cs) {
case 4:
ret = platform_device_add_resources(pdev,
at32_smc_cs4_resource,
ARRAY_SIZE(at32_smc_cs4_resource));
if (ret)
return ret;
/* NCS4 -> OE_N */
select_peripheral(PIOE, (1 << 21), PERIPH_A, 0);
hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
break;
case 5:
ret = platform_device_add_resources(pdev,
at32_smc_cs5_resource,
ARRAY_SIZE(at32_smc_cs5_resource));
if (ret)
return ret;
/* NCS5 -> OE_N */
select_peripheral(PIOE, (1 << 22), PERIPH_A, 0);
hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
break;
default:
return -EINVAL;
}
if (!common_pins_initialized) {
pin_mask = (1 << 19); /* CFCE1 -> CS0_N */
pin_mask |= (1 << 20); /* CFCE2 -> CS1_N */
pin_mask |= (1 << 23); /* CFRNW -> DIR */
pin_mask |= (1 << 24); /* NWAIT <- IORDY */
select_peripheral(PIOE, pin_mask, PERIPH_A, 0);
common_pins_initialized = true;
}
select_peripheral(PIOB, extint_pin, PERIPH_A, AT32_GPIOF_DEGLITCH);
pdev->resource[1].start = EIM_IRQ_BASE + extint;
pdev->resource[1].end = pdev->resource[1].start;
return 0;
}
struct platform_device *__init
at32_add_device_ide(unsigned int id, unsigned int extint,
struct ide_platform_data *data)
{
struct platform_device *pdev;
pdev = platform_device_alloc("at32_ide", id);
if (!pdev)
goto fail;
if (platform_device_add_data(pdev, data,
sizeof(struct ide_platform_data)))
goto fail;
if (at32_init_ide_or_cf(pdev, data->cs, extint))
goto fail;
platform_device_add(pdev);
return pdev;
fail:
platform_device_put(pdev);
return NULL;
}
struct platform_device *__init
at32_add_device_cf(unsigned int id, unsigned int extint,
struct cf_platform_data *data)
{
struct platform_device *pdev;
pdev = platform_device_alloc("at32_cf", id);
if (!pdev)
goto fail;
if (platform_device_add_data(pdev, data,
sizeof(struct cf_platform_data)))
goto fail;
if (at32_init_ide_or_cf(pdev, data->cs, extint))
goto fail;
if (gpio_is_valid(data->detect_pin))
at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
if (gpio_is_valid(data->reset_pin))
at32_select_gpio(data->reset_pin, 0);
if (gpio_is_valid(data->vcc_pin))
at32_select_gpio(data->vcc_pin, 0);
/* READY is used as extint, so we can't select it as gpio */
platform_device_add(pdev);
return pdev;
fail:
platform_device_put(pdev);
return NULL;
}
#endif
/* --------------------------------------------------------------------
* NAND Flash / SmartMedia
* -------------------------------------------------------------------- */
static struct resource smc_cs3_resource[] __initdata = {
{
.start = 0x0c000000,
.end = 0x0fffffff,
.flags = IORESOURCE_MEM,
}, {
.start = 0xfff03c00,
.end = 0xfff03fff,
.flags = IORESOURCE_MEM,
},
};
struct platform_device *__init
at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
{
struct platform_device *pdev;
if (id != 0 || !data)
return NULL;
pdev = platform_device_alloc("atmel_nand", id);
if (!pdev)
goto fail;
if (platform_device_add_resources(pdev, smc_cs3_resource,
ARRAY_SIZE(smc_cs3_resource)))
goto fail;
if (platform_device_add_data(pdev, data,
sizeof(struct atmel_nand_data)))
goto fail;
hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
if (data->enable_pin)
at32_select_gpio(data->enable_pin,
AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
if (data->rdy_pin)
at32_select_gpio(data->rdy_pin, 0);
if (data->det_pin)
at32_select_gpio(data->det_pin, 0);
platform_device_add(pdev);
return pdev;
fail:
platform_device_put(pdev);
return NULL;
}
/* --------------------------------------------------------------------
* AC97C
* -------------------------------------------------------------------- */
static struct resource atmel_ac97c0_resource[] __initdata = {
PBMEM(0xfff02800),
IRQ(29),
};
static struct clk atmel_ac97c0_pclk = {
.name = "pclk",
.parent = &pbb_clk,
.mode = pbb_clk_mode,
.get_rate = pbb_clk_get_rate,
.index = 10,
};
struct platform_device *__init
at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
unsigned int flags)
{
struct platform_device *pdev;
struct dw_dma_slave *rx_dws;
struct dw_dma_slave *tx_dws;
struct ac97c_platform_data _data;
u32 pin_mask;
if (id != 0)
return NULL;
pdev = platform_device_alloc("atmel_ac97c", id);
if (!pdev)
return NULL;
if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
ARRAY_SIZE(atmel_ac97c0_resource)))
goto out_free_resources;
if (!data) {
data = &_data;
memset(data, 0, sizeof(struct ac97c_platform_data));
data->reset_pin = -ENODEV;
}
rx_dws = &data->rx_dws;
tx_dws = &data->tx_dws;
/* Check if DMA slave interface for capture should be configured. */
if (flags & AC97C_CAPTURE) {
rx_dws->dma_dev = &dw_dmac0_device.dev;
rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3);
rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
}
/* Check if DMA slave interface for playback should be configured. */
if (flags & AC97C_PLAYBACK) {
tx_dws->dma_dev = &dw_dmac0_device.dev;
tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
tx_dws->cfg_hi = DWC_CFGH_DST_PER(4);
tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
}
if (platform_device_add_data(pdev, data,
sizeof(struct ac97c_platform_data)))
goto out_free_resources;
/* SDO | SYNC | SCLK | SDI */
pin_mask = (1 << 20) | (1 << 21) | (1 << 22) | (1 << 23);
select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
if (gpio_is_valid(data->reset_pin))
at32_select_gpio(data->reset_pin, AT32_GPIOF_OUTPUT
| AT32_GPIOF_HIGH);
atmel_ac97c0_pclk.dev = &pdev->dev;
platform_device_add(pdev);
return pdev;
out_free_resources:
platform_device_put(pdev);
return NULL;
}
/* --------------------------------------------------------------------
* ABDAC
* -------------------------------------------------------------------- */
static struct resource abdac0_resource[] __initdata = {
PBMEM(0xfff02000),
IRQ(27),
};
static struct clk abdac0_pclk = {
.name = "pclk",
.parent = &pbb_clk,
.mode = pbb_clk_mode,
.get_rate = pbb_clk_get_rate,
.index = 8,
};
static struct clk abdac0_sample_clk = {
.name = "sample_clk",
.mode = genclk_mode,
.get_rate = genclk_get_rate,
.set_rate = genclk_set_rate,
.set_parent = genclk_set_parent,
.index = 6,
};
struct platform_device *__init
at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data)
{
struct platform_device *pdev;
struct dw_dma_slave *dws;
u32 pin_mask;
if (id != 0 || !data)
return NULL;
pdev = platform_device_alloc("atmel_abdac", id);
if (!pdev)
return NULL;
if (platform_device_add_resources(pdev, abdac0_resource,
ARRAY_SIZE(abdac0_resource)))
goto out_free_resources;
dws = &data->dws;
dws->dma_dev = &dw_dmac0_device.dev;
dws->reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
dws->cfg_hi = DWC_CFGH_DST_PER(2);
dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
if (platform_device_add_data(pdev, data,
sizeof(struct atmel_abdac_pdata)))
goto out_free_resources;
pin_mask = (1 << 20) | (1 << 22); /* DATA1 & DATAN1 */
pin_mask |= (1 << 21) | (1 << 23); /* DATA0 & DATAN0 */
select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
abdac0_pclk.dev = &pdev->dev;
abdac0_sample_clk.dev = &pdev->dev;
platform_device_add(pdev);
return pdev;
out_free_resources:
platform_device_put(pdev);
return NULL;
}
/* --------------------------------------------------------------------
* GCLK
* -------------------------------------------------------------------- */
static struct clk gclk0 = {
.name = "gclk0",
.mode = genclk_mode,
.get_rate = genclk_get_rate,
.set_rate = genclk_set_rate,
.set_parent = genclk_set_parent,
.index = 0,
};
static struct clk gclk1 = {
.name = "gclk1",
.mode = genclk_mode,
.get_rate = genclk_get_rate,
.set_rate = genclk_set_rate,
.set_parent = genclk_set_parent,
.index = 1,
};
static struct clk gclk2 = {
.name = "gclk2",
.mode = genclk_mode,
.get_rate = genclk_get_rate,
.set_rate = genclk_set_rate,
.set_parent = genclk_set_parent,
.index = 2,
};
static struct clk gclk3 = {
.name = "gclk3",
.mode = genclk_mode,
.get_rate = genclk_get_rate,
.set_rate = genclk_set_rate,
.set_parent = genclk_set_parent,
.index = 3,
};
static struct clk gclk4 = {
.name = "gclk4",
.mode = genclk_mode,
.get_rate = genclk_get_rate,
.set_rate = genclk_set_rate,
.set_parent = genclk_set_parent,
.index = 4,
};
static __initdata struct clk *init_clocks[] = {
&osc32k,
&osc0,
&osc1,
&pll0,
&pll1,
&cpu_clk,
&hsb_clk,
&pba_clk,
&pbb_clk,
&at32_pm_pclk,
&at32_intc0_pclk,
&at32_hmatrix_clk,
&ebi_clk,
&hramc_clk,
&sdramc_clk,
&smc0_pclk,
&smc0_mck,
&pdc_hclk,
&pdc_pclk,
&dw_dmac0_hclk,
&pico_clk,
&pio0_mck,
&pio1_mck,
&pio2_mck,
&pio3_mck,
&pio4_mck,
&at32_tcb0_t0_clk,
&at32_tcb1_t0_clk,
&atmel_psif0_pclk,
&atmel_psif1_pclk,
&atmel_usart0_usart,
&atmel_usart1_usart,
&atmel_usart2_usart,
&atmel_usart3_usart,
&atmel_pwm0_mck,
#if defined(CONFIG_CPU_AT32AP7000)
&macb0_hclk,
&macb0_pclk,
&macb1_hclk,
&macb1_pclk,
#endif
&atmel_spi0_spi_clk,
&atmel_spi1_spi_clk,
&atmel_twi0_pclk,
&atmel_mci0_pclk,
#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
&atmel_lcdfb0_hck1,
&atmel_lcdfb0_pixclk,
#endif
&ssc0_pclk,
&ssc1_pclk,
&ssc2_pclk,
&usba0_hclk,
&usba0_pclk,
&atmel_ac97c0_pclk,
&abdac0_pclk,
&abdac0_sample_clk,
&gclk0,
&gclk1,
&gclk2,
&gclk3,
&gclk4,
};
void __init setup_platform(void)
{
u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
int i;
if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
main_clock = &pll0;
cpu_clk.parent = &pll0;
} else {
main_clock = &osc0;
cpu_clk.parent = &osc0;
}
if (pm_readl(PLL0) & PM_BIT(PLLOSC))
pll0.parent = &osc1;
if (pm_readl(PLL1) & PM_BIT(PLLOSC))
pll1.parent = &osc1;
genclk_init_parent(&gclk0);
genclk_init_parent(&gclk1);
genclk_init_parent(&gclk2);
genclk_init_parent(&gclk3);
genclk_init_parent(&gclk4);
#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
genclk_init_parent(&atmel_lcdfb0_pixclk);
#endif
genclk_init_parent(&abdac0_sample_clk);
/*
* Build initial dynamic clock list by registering all clocks
* from the array.
* At the same time, turn on all clocks that have at least one
* user already, and turn off everything else. We only do this
* for module clocks, and even though it isn't particularly
* pretty to check the address of the mode function, it should
* do the trick...
*/
for (i = 0; i < ARRAY_SIZE(init_clocks); i++) {
struct clk *clk = init_clocks[i];
/* first, register clock */
at32_clk_register(clk);
if (clk->users == 0)
continue;
if (clk->mode == &cpu_clk_mode)
cpu_mask |= 1 << clk->index;
else if (clk->mode == &hsb_clk_mode)
hsb_mask |= 1 << clk->index;
else if (clk->mode == &pba_clk_mode)
pba_mask |= 1 << clk->index;
else if (clk->mode == &pbb_clk_mode)
pbb_mask |= 1 << clk->index;
}
pm_writel(CPU_MASK, cpu_mask);
pm_writel(HSB_MASK, hsb_mask);
pm_writel(PBA_MASK, pba_mask);
pm_writel(PBB_MASK, pbb_mask);
/* Initialize the port muxes */
at32_init_pio(&pio0_device);
at32_init_pio(&pio1_device);
at32_init_pio(&pio2_device);
at32_init_pio(&pio3_device);
at32_init_pio(&pio4_device);
}
struct gen_pool *sram_pool;
static int __init sram_init(void)
{
struct gen_pool *pool;
/* 1KiB granularity */
pool = gen_pool_create(10, -1);
if (!pool)
goto fail;
if (gen_pool_add(pool, 0x24000000, 0x8000, -1))
goto err_pool_add;
sram_pool = pool;
return 0;
err_pool_add:
gen_pool_destroy(pool);
fail:
pr_err("Failed to create SRAM pool\n");
return -ENOMEM;
}
core_initcall(sram_init);