kernel-fxtec-pro1x/drivers/usb
Mathias Nyman b630d4b9d0 usb: xhci: check usb2 port capabilities before adding hw link PM support
Hardware link powermanagement in usb2 is a per-port capability.
Previously support for hw lpm was enabled for all ports if any usb2 port supported it.

Now instead cache the capability values and check them for each port individually

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-06-05 16:46:19 -07:00
..
atm USB: cxacru: potential underflow in cxacru_cm_get_array() 2013-05-20 11:35:47 -07:00
c67x00 usb: c67x00 RetryCnt value in c67x00 TD should be 3 2013-03-07 12:31:37 +08:00
chipidea usb, chipidea: remove redundant D0 power state set 2013-06-03 11:01:36 -07:00
class USB: usbtmc: Change magic number to constant 2013-05-16 17:50:51 -07:00
core Allow the USB HCD to create Wireless USB root hubs 2013-06-03 10:52:40 -07:00
dwc3 USB: set device dma_mask without reference to global data 2013-05-16 17:30:52 -07:00
early fix build of EHCI debug port code when USB_CHIPIDEA but !USB_EHCI_HCD 2012-11-02 10:13:33 -07:00
gadget Merge 3.10-rc3 into usb-next 2013-05-27 11:00:52 +09:00
host usb: xhci: check usb2 port capabilities before adding hw link PM support 2013-06-05 16:46:19 -07:00
image USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
misc usb: misc: usb3503: Remove 100ms sleep on reset, conform to data sheet 2013-06-03 11:01:09 -07:00
mon USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
musb USB: MUSB: upgrade the isochronous API 2013-05-30 21:34:29 +09:00
phy Merge 3.10-rc3 into usb-next 2013-05-27 11:00:52 +09:00
renesas_usbhs USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
serial USB: serial: pl2303 works at 500kbps 2013-06-03 14:33:26 -07:00
storage Merge 3.10-rc3 into usb-next 2013-05-27 11:00:52 +09:00
wusbcore USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
Kconfig USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
Makefile usb host: Faraday USB2.0 FUSBH200-HCD driver 2013-05-17 10:12:52 -07:00
README
usb-common.c usb: otg: move usb_otg_state_string to usb-common.c 2013-03-18 11:18:03 +02:00
usb-skeleton.c USB: usb-skeleton.c: fix blocked forever in skel_read 2013-03-25 13:32:20 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.