kernel-fxtec-pro1x/arch/arm/mach-s3c2410
Russell King d0d42df2a4 Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel
* at91: (24 commits)
  [ARM] 4615/4: sam926[13]ek buttons updated
  [ARM] 4765/1: [AT91] AT91CAP9A-DK board support
  [ARM] 4764/1: [AT91] AT91CAP9 core support
  [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation
  [ARM] 4761/1: [AT91] Board-support for NEW_LEDs
  [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200
  [ARM] 4759/1: [AT91] Buttons on CSB300
  [ARM] 4758/1: [AT91] LEDs
  [ARM] 4757/1: [AT91] UART initialization
  [ARM] 4756/1: [AT91] Makefile cleanup
  [ARM] 4755/1: [AT91] NAND update
  [ARM] 4754/1: [AT91] SSC library support
  [ARM] 4753/1: [AT91] Use DMA_BIT_MASK
  [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9
  [ARM] 4751/1: [AT91] ISI peripheral on SAM9263
  [ARM] 4750/1: [AT91] STN LCD displays on SAM9261
  [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY
  [ARM] 4646/1: AT91: configurable HZ, default to 128
  [ARM] 4688/1: at91: speed-up irq processing
  [ARM] 4657/1: AT91: Header definition update
  ...

* ep93xx:
  [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations
  [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type
  [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups
  [ARM] 4668/1: ep93xx: implement new GPIO API

* iop:
  [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field
  [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device
  [ARM] 4708/1: iop: update defconfigs for 2.6.24

* kprobes:
  ARM kprobes: let's enable it
  ARM kprobes: special hook for the kprobes breakpoint handler
  ARM kprobes: prevent some functions involved with kprobes from being probed
  ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack
  ARM kprobes: add the kprobes hook to the page fault handler
  ARM kprobes: core code
  ARM kprobes: instruction single-stepping support

* ks8695:
  [ARM] 4603/1: KS8695: debugfs interface to view pin state
  [ARM] 4601/1: KS8695: PCI support

* misc:
  [ARM] remove duplicate includes
  [ARM] CONFIG_DEBUG_STACK_USAGE
  [ARM] 4689/1: small comment wrap fix
  [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix
  [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h
  [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS
  [SERIAL] 21285: Report baud rate back via termios
  [ARM] Remove pointless casts from void pointers,
  [ARM] Misc minor interrupt handler cleanups
  [ARM] Remove at91_lcdc.h
  [ARM] ARRAY_SIZE() cleanup
  [ARM] Update mach-types

* msm:
  [ARM] msm: dma support for MSM7X00A
  [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A)
  [ARM] msm: irq and timer support for ARCH_MSM7X00A
  [ARM] msm: core platform support for ARCH_MSM7X00A

* s3c2410: (33 commits)
  [ARM] 4795/1: S3C244X: Add armclk and setparent call
  [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
  [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
  [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
  [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
  [ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
  [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
  [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
  [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
  [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
  [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
  [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
  [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
  [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
  [ARM] 4781/1: S3C24XX: DMA suspend and resume support
  [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
  [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
  [ARM] 4778/1: S3C2412: Add armclk and init from DVS state
  [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
  [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
  ...

* sa1100:
  [ARM] sa1100: add clock source support

* vfp:
  [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support
  [ARM] 4583/1: ARMv7: Add VFPv3 support
  [ARM] 4582/2: Add support for the common VFP subarchitecture
2008-01-28 13:21:21 +00:00
..
bast-irq.c [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
clock.c Fix misspellings of "system", "controller", "interrupt" and "necessary". 2007-10-19 23:10:43 +02:00
dma.c [ARM] 4566/1: s3c24xx: fix dma functions section mismatch 2007-10-12 23:43:15 +01:00
gpio.c [ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu components 2007-02-11 17:36:09 +00:00
h1940-bluetooth.c [ARM] 4359/3: H1940: Add bluetooth support 2007-05-11 17:19:37 +01:00
irq.c [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
Kconfig [ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU support 2007-07-22 16:44:28 +01:00
mach-amlm5900.c s3c2410fb: removes lcdcon1 register value from s3c2410fb_display 2007-10-16 09:43:18 -07:00
mach-bast.c [ARM] 4728/1: BAST: Do not add IIS device on initialisation 2008-01-28 13:20:49 +00:00
mach-h1940.c s3c2410fb: removes lcdcon1 register value from s3c2410fb_display 2007-10-16 09:43:18 -07:00
mach-n30.c [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c 2007-07-22 16:44:24 +01:00
mach-otom.c [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c 2007-07-22 16:44:24 +01:00
mach-qt2410.c s3c2410fb: removes lcdcon1 register value from s3c2410fb_display 2007-10-16 09:43:18 -07:00
mach-smdk2410.c [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c 2007-07-22 16:44:24 +01:00
mach-vr1000.c [ARM] 4729/1: VR1000: Do not add IIS device on initialisation 2008-01-28 13:20:49 +00:00
Makefile [ARM] 4359/3: H1940: Add bluetooth support 2007-05-11 17:19:37 +01:00
Makefile.boot
pm-h1940.S
pm.c [ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu components 2007-02-11 17:36:09 +00:00
s3c2410.c Driver core: change sysdev classes to use dynamic kobject names 2008-01-24 20:40:40 -08:00
sleep.S [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c 2007-07-22 16:44:24 +01:00
usb-simtec.c [ARM] Remove pointless casts from void pointers, 2008-01-26 14:50:00 +00:00
usb-simtec.h [ARM] 4050/1: S3C24XX: remove old changelogs in arch/arm/mach-s3c2410 2006-12-17 23:38:02 +00:00