770a1ad557
Add support for reading module EEPROMs through phylink. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
148 lines
5.1 KiB
C
148 lines
5.1 KiB
C
#ifndef NETDEV_PCS_H
|
|
#define NETDEV_PCS_H
|
|
|
|
#include <linux/phy.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
struct device_node;
|
|
struct ethtool_cmd;
|
|
struct net_device;
|
|
|
|
enum {
|
|
MLO_PAUSE_NONE,
|
|
MLO_PAUSE_ASYM = BIT(0),
|
|
MLO_PAUSE_SYM = BIT(1),
|
|
MLO_PAUSE_RX = BIT(2),
|
|
MLO_PAUSE_TX = BIT(3),
|
|
MLO_PAUSE_TXRX_MASK = MLO_PAUSE_TX | MLO_PAUSE_RX,
|
|
MLO_PAUSE_AN = BIT(4),
|
|
|
|
MLO_AN_PHY = 0, /* Conventional PHY */
|
|
MLO_AN_FIXED, /* Fixed-link mode */
|
|
MLO_AN_SGMII, /* Cisco SGMII protocol */
|
|
MLO_AN_8023Z, /* 1000base-X protocol */
|
|
};
|
|
|
|
static inline bool phylink_autoneg_inband(unsigned int mode)
|
|
{
|
|
return mode == MLO_AN_SGMII || mode == MLO_AN_8023Z;
|
|
}
|
|
|
|
struct phylink_link_state {
|
|
__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
|
|
__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
|
|
phy_interface_t interface; /* PHY_INTERFACE_xxx */
|
|
int speed;
|
|
int duplex;
|
|
int pause;
|
|
unsigned int link:1;
|
|
unsigned int an_enabled:1;
|
|
unsigned int an_complete:1;
|
|
};
|
|
|
|
struct phylink_mac_ops {
|
|
/**
|
|
* validate: validate and update the link configuration
|
|
* @ndev: net_device structure associated with MAC
|
|
* @config: configuration to validate
|
|
*
|
|
* Update the %config->supported and %config->advertised masks
|
|
* clearing bits that can not be supported.
|
|
*
|
|
* Note: the PHY may be able to transform from one connection
|
|
* technology to another, so, eg, don't clear 1000BaseX just
|
|
* because the MAC is unable to support it. This is more about
|
|
* clearing unsupported speeds and duplex settings.
|
|
*
|
|
* If the %config->interface mode is %PHY_INTERFACE_MODE_1000BASEX
|
|
* or %PHY_INTERFACE_MODE_2500BASEX, select the appropriate mode
|
|
* based on %config->advertised and/or %config->speed.
|
|
*/
|
|
void (*validate)(struct net_device *ndev, unsigned long *supported,
|
|
struct phylink_link_state *state);
|
|
|
|
/* Read the current link state from the hardware */
|
|
int (*mac_link_state)(struct net_device *, struct phylink_link_state *);
|
|
|
|
/* Configure the MAC */
|
|
/**
|
|
* mac_config: configure the MAC for the selected mode and state
|
|
* @ndev: net_device structure for the MAC
|
|
* @mode: one of MLO_AN_FIXED, MLO_AN_PHY, MLO_AN_8023Z, MLO_AN_SGMII
|
|
* @state: state structure
|
|
*
|
|
* The action performed depends on the currently selected mode:
|
|
*
|
|
* %MLO_AN_FIXED, %MLO_AN_PHY:
|
|
* set the specified speed, duplex, pause mode, and phy interface
|
|
* mode in the provided @state.
|
|
* %MLO_AN_8023Z:
|
|
* place the link in 1000base-X mode, advertising the parameters
|
|
* given in advertising in @state.
|
|
* %MLO_AN_SGMII:
|
|
* place the link in Cisco SGMII mode - there is no advertisment
|
|
* to make as the PHY communicates the speed and duplex to the
|
|
* MAC over the in-band control word. Configuration of the pause
|
|
* mode is as per MLO_AN_PHY since this is not included.
|
|
*/
|
|
void (*mac_config)(struct net_device *ndev, unsigned int mode,
|
|
const struct phylink_link_state *state);
|
|
|
|
/**
|
|
* mac_an_restart: restart 802.3z BaseX autonegotiation
|
|
* @ndev: net_device structure for the MAC
|
|
*/
|
|
void (*mac_an_restart)(struct net_device *ndev);
|
|
|
|
void (*mac_link_down)(struct net_device *, unsigned int mode);
|
|
void (*mac_link_up)(struct net_device *, unsigned int mode,
|
|
struct phy_device *);
|
|
};
|
|
|
|
struct phylink *phylink_create(struct net_device *, struct device_node *,
|
|
phy_interface_t iface, const struct phylink_mac_ops *ops);
|
|
void phylink_destroy(struct phylink *);
|
|
|
|
int phylink_connect_phy(struct phylink *, struct phy_device *);
|
|
int phylink_of_phy_connect(struct phylink *, struct device_node *);
|
|
void phylink_disconnect_phy(struct phylink *);
|
|
|
|
void phylink_mac_change(struct phylink *, bool up);
|
|
|
|
void phylink_start(struct phylink *);
|
|
void phylink_stop(struct phylink *);
|
|
|
|
void phylink_ethtool_get_wol(struct phylink *, struct ethtool_wolinfo *);
|
|
int phylink_ethtool_set_wol(struct phylink *, struct ethtool_wolinfo *);
|
|
|
|
int phylink_ethtool_ksettings_get(struct phylink *,
|
|
struct ethtool_link_ksettings *);
|
|
int phylink_ethtool_ksettings_set(struct phylink *,
|
|
const struct ethtool_link_ksettings *);
|
|
int phylink_ethtool_nway_reset(struct phylink *);
|
|
void phylink_ethtool_get_pauseparam(struct phylink *,
|
|
struct ethtool_pauseparam *);
|
|
int phylink_ethtool_set_pauseparam(struct phylink *,
|
|
struct ethtool_pauseparam *);
|
|
int phylink_ethtool_get_module_info(struct phylink *, struct ethtool_modinfo *);
|
|
int phylink_ethtool_get_module_eeprom(struct phylink *,
|
|
struct ethtool_eeprom *, u8 *);
|
|
int phylink_init_eee(struct phylink *, bool);
|
|
int phylink_get_eee_err(struct phylink *);
|
|
int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *);
|
|
int phylink_ethtool_set_eee(struct phylink *, struct ethtool_eee *);
|
|
int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);
|
|
|
|
#define phylink_zero(bm) \
|
|
bitmap_zero(bm, __ETHTOOL_LINK_MODE_MASK_NBITS)
|
|
#define __phylink_do_bit(op, bm, mode) \
|
|
op(ETHTOOL_LINK_MODE_ ## mode ## _BIT, bm)
|
|
|
|
#define phylink_set(bm, mode) __phylink_do_bit(__set_bit, bm, mode)
|
|
#define phylink_clear(bm, mode) __phylink_do_bit(__clear_bit, bm, mode)
|
|
#define phylink_test(bm, mode) __phylink_do_bit(test_bit, bm, mode)
|
|
|
|
void phylink_set_port_modes(unsigned long *bits);
|
|
|
|
#endif
|