kernel-fxtec-pro1x/drivers/usb
John Youn aebda61871 usb: dwc3: Reset the transfer resource index on SET_INTERFACE
This fixes an issue introduced in commit b23c843992 (usb: dwc3:
gadget: fix DEPSTARTCFG for non-EP0 EPs) that made sure we would
only use DEPSTARTCFG once per SetConfig.

The trick is that we should use one DEPSTARTCFG per SetConfig *OR*
SetInterface. SetInterface was completely missed from the original
patch.

This problem became aparent after commit 76e838c9f7 (usb: dwc3:
gadget: return error if command sent to DEPCMD register fails)
added checking of the return status of device endpoint commands.

'Set Endpoint Transfer Resource' command was caught failing
occasionally. This is because the Transfer Resource
Index was not getting reset during a SET_INTERFACE request.

Finally, to fix the issue, was we have to do is make sure that
our start_config_issued flag gets reset whenever we receive a
SetInterface request.

To verify the problem (and its fix), all we have to do is run
test 9 from testusb with 'testusb -t 9 -s 2048 -a -c 5000'.

Tested-by: Huang Rui <ray.huang@amd.com>
Tested-by: Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
Fixes: b23c843992 (usb: dwc3: gadget: fix DEPSTARTCFG for non-EP0 EPs)
Cc: <stable@vger.kernel.org> # v3.2+
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-22 08:52:42 -05:00
..
atm Minor merge needed, due to function move. 2015-07-01 10:49:25 -07:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea USB Chipidea update for v4.2-rc1 2015-06-10 18:18:10 -07:00
class cdc-acm: Add support of ATOL FPrint fiscal printers 2015-06-08 14:01:13 -07:00
common usb: ulpi: ulpi_init should be executed in subsys_initcall 2015-07-20 12:57:46 -05:00
core usb: patches for v4.2 merge window 2015-06-02 10:47:03 +09:00
dwc2 usb: dwc2: embed storage for reg backup in struct dwc2_hsotg 2015-07-06 12:34:08 -05:00
dwc3 usb: dwc3: Reset the transfer resource index on SET_INTERFACE 2015-07-22 08:52:42 -05:00
early
gadget usb: gadget: udc: core: Fix argument of dma_map_single for IOMMU 2015-07-20 12:57:46 -05:00
host Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus 2015-06-27 12:44:34 -07:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: check for null return from kzalloc 2015-06-08 14:25:04 -07:00
misc USB patches for 4.2-rc1 2015-06-26 15:59:26 -07:00
mon USB: mon_stat.c: move assignment out of if () block 2015-05-10 16:01:11 +02:00
musb usb: musb: host: rely on port_mode to call musb_start() 2015-07-06 12:34:07 -05:00
phy usb: phy: mxs: suspend to RAM causes NULL pointer dereference 2015-07-06 12:34:08 -05:00
renesas_usbhs usb: patches for v4.2 merge window 2015-06-02 10:47:03 +09:00
serial USB: serial: Destroy serial_minors IDR on module exit 2015-07-09 10:41:23 +02:00
storage USB patches for 4.2-rc1 2015-06-26 15:59:26 -07:00
usbip usbip: vhci_hcd: use USB_DT_HUB 2015-04-03 19:03:15 +02:00
wusbcore wusbcore: rh: use USB_DT_HUB 2015-04-03 19:03:15 +02:00
Kconfig usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/ 2015-01-27 09:39:38 -06:00
Makefile usb: load usb phy earlier 2015-03-18 17:25:16 +01:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.