kernel-fxtec-pro1x/drivers/rtc/rtc-opal.c
Nicholas Piggin 682e6b4da5 rtc: opal: Fix OPAL RTC driver OPAL_BUSY loops
The OPAL RTC driver does not sleep in case it gets OPAL_BUSY or
OPAL_BUSY_EVENT from firmware, which causes large scheduling
latencies, up to 50 seconds have been observed here when RTC stops
responding (BMC reboot can do it).

Fix this by converting it to the standard form OPAL_BUSY loop that
sleeps.

Fixes: 628daa8d5a ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-25 13:24:13 +10:00

310 lines
7.3 KiB
C

/*
* IBM OPAL RTC driver
* Copyright (C) 2014 IBM
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#define DRVNAME "rtc-opal"
#include <linux/module.h>
#include <linux/err.h>
#include <linux/rtc.h>
#include <linux/delay.h>
#include <linux/bcd.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <asm/opal.h>
#include <asm/firmware.h>
static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm)
{
tm->tm_year = ((bcd2bin(y_m_d >> 24) * 100) +
bcd2bin((y_m_d >> 16) & 0xff)) - 1900;
tm->tm_mon = bcd2bin((y_m_d >> 8) & 0xff) - 1;
tm->tm_mday = bcd2bin(y_m_d & 0xff);
tm->tm_hour = bcd2bin((h_m_s_ms >> 56) & 0xff);
tm->tm_min = bcd2bin((h_m_s_ms >> 48) & 0xff);
tm->tm_sec = bcd2bin((h_m_s_ms >> 40) & 0xff);
tm->tm_wday = -1;
}
static void tm_to_opal(struct rtc_time *tm, u32 *y_m_d, u64 *h_m_s_ms)
{
*y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) / 100)) << 24;
*y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) % 100)) << 16;
*y_m_d |= ((u32)bin2bcd((tm->tm_mon + 1))) << 8;
*y_m_d |= ((u32)bin2bcd(tm->tm_mday));
*h_m_s_ms |= ((u64)bin2bcd(tm->tm_hour)) << 56;
*h_m_s_ms |= ((u64)bin2bcd(tm->tm_min)) << 48;
*h_m_s_ms |= ((u64)bin2bcd(tm->tm_sec)) << 40;
}
static int opal_get_rtc_time(struct device *dev, struct rtc_time *tm)
{
s64 rc = OPAL_BUSY;
int retries = 10;
u32 y_m_d;
u64 h_m_s_ms;
__be32 __y_m_d;
__be64 __h_m_s_ms;
while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
rc = opal_rtc_read(&__y_m_d, &__h_m_s_ms);
if (rc == OPAL_BUSY_EVENT) {
msleep(OPAL_BUSY_DELAY_MS);
opal_poll_events(NULL);
} else if (rc == OPAL_BUSY) {
msleep(OPAL_BUSY_DELAY_MS);
} else if (rc == OPAL_HARDWARE || rc == OPAL_INTERNAL_ERROR) {
if (retries--) {
msleep(10); /* Wait 10ms before retry */
rc = OPAL_BUSY; /* go around again */
}
}
}
if (rc != OPAL_SUCCESS)
return -EIO;
y_m_d = be32_to_cpu(__y_m_d);
h_m_s_ms = be64_to_cpu(__h_m_s_ms);
opal_to_tm(y_m_d, h_m_s_ms, tm);
return 0;
}
static int opal_set_rtc_time(struct device *dev, struct rtc_time *tm)
{
s64 rc = OPAL_BUSY;
int retries = 10;
u32 y_m_d = 0;
u64 h_m_s_ms = 0;
tm_to_opal(tm, &y_m_d, &h_m_s_ms);
while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
rc = opal_rtc_write(y_m_d, h_m_s_ms);
if (rc == OPAL_BUSY_EVENT) {
msleep(OPAL_BUSY_DELAY_MS);
opal_poll_events(NULL);
} else if (rc == OPAL_BUSY) {
msleep(OPAL_BUSY_DELAY_MS);
} else if (rc == OPAL_HARDWARE || rc == OPAL_INTERNAL_ERROR) {
if (retries--) {
msleep(10); /* Wait 10ms before retry */
rc = OPAL_BUSY; /* go around again */
}
}
}
return rc == OPAL_SUCCESS ? 0 : -EIO;
}
/*
* TPO Timed Power-On
*
* TPO get/set OPAL calls care about the hour and min and to make it consistent
* with the rtc utility time conversion functions, we use the 'u64' to store
* its value and perform bit shift by 32 before use..
*/
static int opal_get_tpo_time(struct device *dev, struct rtc_wkalrm *alarm)
{
__be32 __y_m_d, __h_m;
struct opal_msg msg;
int rc, token;
u64 h_m_s_ms;
u32 y_m_d;
token = opal_async_get_token_interruptible();
if (token < 0) {
if (token != -ERESTARTSYS)
pr_err("Failed to get the async token\n");
return token;
}
rc = opal_tpo_read(token, &__y_m_d, &__h_m);
if (rc != OPAL_ASYNC_COMPLETION) {
rc = -EIO;
goto exit;
}
rc = opal_async_wait_response(token, &msg);
if (rc) {
rc = -EIO;
goto exit;
}
rc = opal_get_async_rc(msg);
if (rc != OPAL_SUCCESS) {
rc = -EIO;
goto exit;
}
y_m_d = be32_to_cpu(__y_m_d);
h_m_s_ms = ((u64)be32_to_cpu(__h_m) << 32);
/* check if no alarm is set */
if (y_m_d == 0 && h_m_s_ms == 0) {
pr_debug("No alarm is set\n");
rc = -ENOENT;
goto exit;
} else {
pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms);
}
opal_to_tm(y_m_d, h_m_s_ms, &alarm->time);
exit:
opal_async_release_token(token);
return rc;
}
/* Set Timed Power-On */
static int opal_set_tpo_time(struct device *dev, struct rtc_wkalrm *alarm)
{
u64 h_m_s_ms = 0;
struct opal_msg msg;
u32 y_m_d = 0;
int token, rc;
/* if alarm is enabled */
if (alarm->enabled) {
tm_to_opal(&alarm->time, &y_m_d, &h_m_s_ms);
pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms);
} else {
pr_debug("Alarm getting disabled\n");
}
token = opal_async_get_token_interruptible();
if (token < 0) {
if (token != -ERESTARTSYS)
pr_err("Failed to get the async token\n");
return token;
}
/* TPO, we care about hour and minute */
rc = opal_tpo_write(token, y_m_d,
(u32)((h_m_s_ms >> 32) & 0xffff0000));
if (rc != OPAL_ASYNC_COMPLETION) {
rc = -EIO;
goto exit;
}
rc = opal_async_wait_response(token, &msg);
if (rc) {
rc = -EIO;
goto exit;
}
rc = opal_get_async_rc(msg);
if (rc != OPAL_SUCCESS)
rc = -EIO;
exit:
opal_async_release_token(token);
return rc;
}
int opal_tpo_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct rtc_wkalrm alarm = { .enabled = 0 };
/*
* TPO is automatically enabled when opal_set_tpo_time() is called with
* non-zero rtc-time. We only handle disable case which needs to be
* explicitly told to opal.
*/
return enabled ? 0 : opal_set_tpo_time(dev, &alarm);
}
static struct rtc_class_ops opal_rtc_ops = {
.read_time = opal_get_rtc_time,
.set_time = opal_set_rtc_time,
};
static int opal_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
if (pdev->dev.of_node &&
(of_property_read_bool(pdev->dev.of_node, "wakeup-source") ||
of_property_read_bool(pdev->dev.of_node, "has-tpo")/* legacy */)) {
device_set_wakeup_capable(&pdev->dev, true);
opal_rtc_ops.read_alarm = opal_get_tpo_time;
opal_rtc_ops.set_alarm = opal_set_tpo_time;
opal_rtc_ops.alarm_irq_enable = opal_tpo_alarm_irq_enable;
}
rtc = devm_rtc_device_register(&pdev->dev, DRVNAME, &opal_rtc_ops,
THIS_MODULE);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
rtc->uie_unsupported = 1;
return 0;
}
static const struct of_device_id opal_rtc_match[] = {
{
.compatible = "ibm,opal-rtc",
},
{ }
};
MODULE_DEVICE_TABLE(of, opal_rtc_match);
static const struct platform_device_id opal_rtc_driver_ids[] = {
{
.name = "opal-rtc",
},
{ }
};
MODULE_DEVICE_TABLE(platform, opal_rtc_driver_ids);
static struct platform_driver opal_rtc_driver = {
.probe = opal_rtc_probe,
.id_table = opal_rtc_driver_ids,
.driver = {
.name = DRVNAME,
.of_match_table = opal_rtc_match,
},
};
static int __init opal_rtc_init(void)
{
if (!firmware_has_feature(FW_FEATURE_OPAL))
return -ENODEV;
return platform_driver_register(&opal_rtc_driver);
}
static void __exit opal_rtc_exit(void)
{
platform_driver_unregister(&opal_rtc_driver);
}
MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>");
MODULE_DESCRIPTION("IBM OPAL RTC driver");
MODULE_LICENSE("GPL");
module_init(opal_rtc_init);
module_exit(opal_rtc_exit);