Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/mfd/madera-core.c
Richard Fitzgerald 16b27467f4 mfd: madera: Add common support for Cirrus Logic Madera codecs 
This adds the generic core support for Cirrus Logic "Madera" class codecs.
These are complex audio codec SoCs with a variety of digital and analogue
I/O, onboard audio processing and DSPs, and other features.

These codecs are all based off a common set of hardware IP so can be
supported by a core of common code (with a few minor device-to-device
variations).

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Nikesh Oswal <Nikesh.Oswal@cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-06-05 11:14:56 +01:00

609 lines
14 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Core MFD support for Cirrus Logic Madera codecs
*
* Copyright (C) 2015-2018 Cirrus Logic
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by the
* Free Software Foundation; version 2.
*/
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/notifier.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/madera/core.h>
#include <linux/mfd/madera/registers.h>
#include "madera.h"
#define CS47L35_SILICON_ID 0x6360
#define CS47L85_SILICON_ID 0x6338
#define CS47L90_SILICON_ID 0x6364
#define MADERA_32KZ_MCLK2 1
static const char * const madera_core_supplies[] = {
"AVDD",
"DBVDD1",
};
static const struct mfd_cell madera_ldo1_devs[] = {
{ .name = "madera-ldo1" },
};
static const char * const cs47l35_supplies[] = {
"MICVDD",
"DBVDD2",
"CPVDD1",
"CPVDD2",
"SPKVDD",
};
static const struct mfd_cell cs47l35_devs[] = {
{ .name = "madera-pinctrl", },
{ .name = "madera-irq", },
{ .name = "madera-micsupp", },
{ .name = "madera-gpio", },
{ .name = "madera-extcon", },
{
.name = "cs47l35-codec",
.parent_supplies = cs47l35_supplies,
.num_parent_supplies = ARRAY_SIZE(cs47l35_supplies),
},
};
static const char * const cs47l85_supplies[] = {
"MICVDD",
"DBVDD2",
"DBVDD3",
"DBVDD4",
"CPVDD1",
"CPVDD2",
"SPKVDDL",
"SPKVDDR",
};
static const struct mfd_cell cs47l85_devs[] = {
{ .name = "madera-pinctrl", },
{ .name = "madera-irq", },
{ .name = "madera-micsupp" },
{ .name = "madera-gpio", },
{ .name = "madera-extcon", },
{
.name = "cs47l85-codec",
.parent_supplies = cs47l85_supplies,
.num_parent_supplies = ARRAY_SIZE(cs47l85_supplies),
},
};
static const char * const cs47l90_supplies[] = {
"MICVDD",
"DBVDD2",
"DBVDD3",
"DBVDD4",
"CPVDD1",
"CPVDD2",
};
static const struct mfd_cell cs47l90_devs[] = {
{ .name = "madera-pinctrl", },
{ .name = "madera-irq", },
{ .name = "madera-micsupp", },
{ .name = "madera-gpio", },
{ .name = "madera-extcon", },
{
.name = "cs47l90-codec",
.parent_supplies = cs47l90_supplies,
.num_parent_supplies = ARRAY_SIZE(cs47l90_supplies),
},
};
/* Used by madera-i2c and madera-spi drivers */
const char *madera_name_from_type(enum madera_type type)
{
switch (type) {
case CS47L35:
return "CS47L35";
case CS47L85:
return "CS47L85";
case CS47L90:
return "CS47L90";
case CS47L91:
return "CS47L91";
case WM1840:
return "WM1840";
default:
return "Unknown";
}
}
EXPORT_SYMBOL_GPL(madera_name_from_type);
#define MADERA_BOOT_POLL_MAX_INTERVAL_US 5000
#define MADERA_BOOT_POLL_TIMEOUT_US 25000
static int madera_wait_for_boot(struct madera *madera)
{
unsigned int val;
int ret;
/*
* We can't use an interrupt as we need to runtime resume to do so,
* so we poll the status bit. This won't race with the interrupt
* handler because it will be blocked on runtime resume.
*/
ret = regmap_read_poll_timeout(madera->regmap,
MADERA_IRQ1_RAW_STATUS_1,
val,
(val & MADERA_BOOT_DONE_STS1),
MADERA_BOOT_POLL_MAX_INTERVAL_US,
MADERA_BOOT_POLL_TIMEOUT_US);
if (ret)
dev_err(madera->dev, "Polling BOOT_DONE_STS failed: %d\n", ret);
/*
* BOOT_DONE defaults to unmasked on boot so we must ack it.
* Do this unconditionally to avoid interrupt storms.
*/
regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,
MADERA_BOOT_DONE_EINT1);
pm_runtime_mark_last_busy(madera->dev);
return ret;
}
static int madera_soft_reset(struct madera *madera)
{
int ret;
ret = regmap_write(madera->regmap, MADERA_SOFTWARE_RESET, 0);
if (ret != 0) {
dev_err(madera->dev, "Failed to soft reset device: %d\n", ret);
return ret;
}
/* Allow time for internal clocks to startup after reset */
usleep_range(1000, 2000);
return 0;
}
static void madera_enable_hard_reset(struct madera *madera)
{
if (!madera->pdata.reset)
return;
/*
* There are many existing out-of-tree users of these codecs that we
* can't break so preserve the expected behaviour of setting the line
* low to assert reset.
*/
gpiod_set_raw_value_cansleep(madera->pdata.reset, 0);
}
static void madera_disable_hard_reset(struct madera *madera)
{
if (!madera->pdata.reset)
return;
gpiod_set_raw_value_cansleep(madera->pdata.reset, 1);
usleep_range(1000, 2000);
}
static int __maybe_unused madera_runtime_resume(struct device *dev)
{
struct madera *madera = dev_get_drvdata(dev);
int ret;
dev_dbg(dev, "Leaving sleep mode\n");
ret = regulator_enable(madera->dcvdd);
if (ret) {
dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
return ret;
}
regcache_cache_only(madera->regmap, false);
regcache_cache_only(madera->regmap_32bit, false);
ret = madera_wait_for_boot(madera);
if (ret)
goto err;
ret = regcache_sync(madera->regmap);
if (ret) {
dev_err(dev, "Failed to restore 16-bit register cache\n");
goto err;
}
ret = regcache_sync(madera->regmap_32bit);
if (ret) {
dev_err(dev, "Failed to restore 32-bit register cache\n");
goto err;
}
return 0;
err:
regcache_cache_only(madera->regmap_32bit, true);
regcache_cache_only(madera->regmap, true);
regulator_disable(madera->dcvdd);
return ret;
}
static int __maybe_unused madera_runtime_suspend(struct device *dev)
{
struct madera *madera = dev_get_drvdata(dev);
dev_dbg(madera->dev, "Entering sleep mode\n");
regcache_cache_only(madera->regmap, true);
regcache_mark_dirty(madera->regmap);
regcache_cache_only(madera->regmap_32bit, true);
regcache_mark_dirty(madera->regmap_32bit);
regulator_disable(madera->dcvdd);
return 0;
}
const struct dev_pm_ops madera_pm_ops = {
SET_RUNTIME_PM_OPS(madera_runtime_suspend,
madera_runtime_resume,
NULL)
};
EXPORT_SYMBOL_GPL(madera_pm_ops);
const struct of_device_id madera_of_match[] = {
{ .compatible = "cirrus,cs47l35", .data = (void *)CS47L35 },
{ .compatible = "cirrus,cs47l85", .data = (void *)CS47L85 },
{ .compatible = "cirrus,cs47l90", .data = (void *)CS47L90 },
{ .compatible = "cirrus,cs47l91", .data = (void *)CS47L91 },
{ .compatible = "cirrus,wm1840", .data = (void *)WM1840 },
{}
};
EXPORT_SYMBOL_GPL(madera_of_match);
static int madera_get_reset_gpio(struct madera *madera)
{
struct gpio_desc *reset;
int ret;
if (madera->pdata.reset)
return 0;
reset = devm_gpiod_get_optional(madera->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(reset)) {
ret = PTR_ERR(reset);
if (ret != -EPROBE_DEFER)
dev_err(madera->dev, "Failed to request /RESET: %d\n",
ret);
return ret;
}
/*
* A hard reset is needed for full reset of the chip. We allow running
* without hard reset only because it can be useful for early
* prototyping and some debugging, but we need to warn it's not ideal.
*/
if (!reset)
dev_warn(madera->dev,
"Running without reset GPIO is not recommended\n");
madera->pdata.reset = reset;
return 0;
}
static void madera_set_micbias_info(struct madera *madera)
{
/*
* num_childbias is an array because future codecs can have different
* childbiases for each micbias. Unspecified values default to 0.
*/
switch (madera->type) {
case CS47L35:
madera->num_micbias = 2;
madera->num_childbias[0] = 2;
madera->num_childbias[1] = 2;
return;
case CS47L85:
case WM1840:
madera->num_micbias = 4;
/* no child biases */
return;
case CS47L90:
case CS47L91:
madera->num_micbias = 2;
madera->num_childbias[0] = 4;
madera->num_childbias[1] = 4;
return;
default:
return;
}
}
int madera_dev_init(struct madera *madera)
{
struct device *dev = madera->dev;
unsigned int hwid;
int (*patch_fn)(struct madera *) = NULL;
const struct mfd_cell *mfd_devs;
int n_devs = 0;
int i, ret;
dev_set_drvdata(madera->dev, madera);
BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier);
madera_set_micbias_info(madera);
/*
* We need writable hw config info that all children can share.
* Simplest to take one shared copy of pdata struct.
*/
if (dev_get_platdata(madera->dev)) {
memcpy(&madera->pdata, dev_get_platdata(madera->dev),
sizeof(madera->pdata));
}
ret = madera_get_reset_gpio(madera);
if (ret)
return ret;
regcache_cache_only(madera->regmap, true);
regcache_cache_only(madera->regmap_32bit, true);
for (i = 0; i < ARRAY_SIZE(madera_core_supplies); i++)
madera->core_supplies[i].supply = madera_core_supplies[i];
madera->num_core_supplies = ARRAY_SIZE(madera_core_supplies);
/*
* On some codecs DCVDD could be supplied by the internal LDO1.
* For those we must add the LDO1 driver before requesting DCVDD
* No devm_ because we need to control shutdown order of children.
*/
switch (madera->type) {
case CS47L35:
case CS47L90:
case CS47L91:
break;
case CS47L85:
case WM1840:
ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
madera_ldo1_devs,
ARRAY_SIZE(madera_ldo1_devs),
NULL, 0, NULL);
if (ret) {
dev_err(dev, "Failed to add LDO1 child: %d\n", ret);
return ret;
}
break;
default:
/* No point continuing if the type is unknown */
dev_err(madera->dev, "Unknown device type %d\n", madera->type);
return -ENODEV;
}
ret = devm_regulator_bulk_get(dev, madera->num_core_supplies,
madera->core_supplies);
if (ret) {
dev_err(dev, "Failed to request core supplies: %d\n", ret);
goto err_devs;
}
/*
* Don't use devres here. If the regulator is one of our children it
* will already have been removed before devres cleanup on this mfd
* driver tries to call put() on it. We need control of shutdown order.
*/
madera->dcvdd = regulator_get(madera->dev, "DCVDD");
if (IS_ERR(madera->dcvdd)) {
ret = PTR_ERR(madera->dcvdd);
dev_err(dev, "Failed to request DCVDD: %d\n", ret);
goto err_devs;
}
ret = regulator_bulk_enable(madera->num_core_supplies,
madera->core_supplies);
if (ret) {
dev_err(dev, "Failed to enable core supplies: %d\n", ret);
goto err_dcvdd;
}
ret = regulator_enable(madera->dcvdd);
if (ret) {
dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
goto err_enable;
}
madera_disable_hard_reset(madera);
regcache_cache_only(madera->regmap, false);
regcache_cache_only(madera->regmap_32bit, false);
/*
* Now we can power up and verify that this is a chip we know about
* before we start doing any writes to its registers.
*/
ret = regmap_read(madera->regmap, MADERA_SOFTWARE_RESET, &hwid);
if (ret) {
dev_err(dev, "Failed to read ID register: %d\n", ret);
goto err_reset;
}
switch (hwid) {
case CS47L35_SILICON_ID:
if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
switch (madera->type) {
case CS47L35:
patch_fn = cs47l35_patch;
mfd_devs = cs47l35_devs;
n_devs = ARRAY_SIZE(cs47l35_devs);
break;
default:
break;
}
}
break;
case CS47L85_SILICON_ID:
if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
switch (madera->type) {
case CS47L85:
case WM1840:
patch_fn = cs47l85_patch;
mfd_devs = cs47l85_devs;
n_devs = ARRAY_SIZE(cs47l85_devs);
break;
default:
break;
}
}
break;
case CS47L90_SILICON_ID:
if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
switch (madera->type) {
case CS47L90:
case CS47L91:
patch_fn = cs47l90_patch;
mfd_devs = cs47l90_devs;
n_devs = ARRAY_SIZE(cs47l90_devs);
break;
default:
break;
}
}
break;
default:
dev_err(madera->dev, "Unknown device ID: %x\n", hwid);
ret = -EINVAL;
goto err_reset;
}
if (!n_devs) {
dev_err(madera->dev, "Device ID 0x%x not a %s\n", hwid,
madera->type_name);
ret = -ENODEV;
goto err_reset;
}
/*
* It looks like a device we support. If we don't have a hard reset
* we can now attempt a soft reset.
*/
if (!madera->pdata.reset) {
ret = madera_soft_reset(madera);
if (ret)
goto err_reset;
}
ret = madera_wait_for_boot(madera);
if (ret) {
dev_err(madera->dev, "Device failed initial boot: %d\n", ret);
goto err_reset;
}
ret = regmap_read(madera->regmap, MADERA_HARDWARE_REVISION,
&madera->rev);
if (ret) {
dev_err(dev, "Failed to read revision register: %d\n", ret);
goto err_reset;
}
madera->rev &= MADERA_HW_REVISION_MASK;
dev_info(dev, "%s silicon revision %d\n", madera->type_name,
madera->rev);
/* Apply hardware patch */
if (patch_fn) {
ret = patch_fn(madera);
if (ret) {
dev_err(madera->dev, "Failed to apply patch %d\n", ret);
goto err_reset;
}
}
/* Init 32k clock sourced from MCLK2 */
ret = regmap_update_bits(madera->regmap,
MADERA_CLOCK_32K_1,
MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
if (ret) {
dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
goto err_reset;
}
pm_runtime_set_active(madera->dev);
pm_runtime_enable(madera->dev);
pm_runtime_set_autosuspend_delay(madera->dev, 100);
pm_runtime_use_autosuspend(madera->dev);
/* No devm_ because we need to control shutdown order of children */
ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
mfd_devs, n_devs,
NULL, 0, NULL);
if (ret) {
dev_err(madera->dev, "Failed to add subdevices: %d\n", ret);
goto err_pm_runtime;
}
return 0;
err_pm_runtime:
pm_runtime_disable(madera->dev);
err_reset:
madera_enable_hard_reset(madera);
regulator_disable(madera->dcvdd);
err_enable:
regulator_bulk_disable(madera->num_core_supplies,
madera->core_supplies);
err_dcvdd:
regulator_put(madera->dcvdd);
err_devs:
mfd_remove_devices(dev);
return ret;
}
EXPORT_SYMBOL_GPL(madera_dev_init);
int madera_dev_exit(struct madera *madera)
{
/* Prevent any IRQs being serviced while we clean up */
disable_irq(madera->irq);
/*
* DCVDD could be supplied by a child node, we must disable it before
* removing the children, and prevent PM runtime from turning it back on
*/
pm_runtime_disable(madera->dev);
regulator_disable(madera->dcvdd);
regulator_put(madera->dcvdd);
mfd_remove_devices(madera->dev);
madera_enable_hard_reset(madera);
regulator_bulk_disable(madera->num_core_supplies,
madera->core_supplies);
return 0;
}
EXPORT_SYMBOL_GPL(madera_dev_exit);
MODULE_DESCRIPTION("Madera core MFD driver");
MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>");
MODULE_LICENSE("GPL v2");
Reference in a new issue View git blame Copy permalink