4f608d382e
The initialization of MediaTek power manager(SCPSYS) is builtin_platform_driver, and SMI must depend on power-domain. Thus, currently subsys_initcall for SMI is unnecessary, SMI will be always probe defered by power-domain. Degrade it to module_init. In addition, there are two small changes about the probe sequence: 1) Delete this two lines. if (!dev->pm_domain) return -EPROBE_DEFER; This is not helpful. the platform driver framework guarantee this. The "dev_pm_domain_attach" in the "platform_drv_probe" will return EPROBE_DEFER if its powerdomain is not ready. 2) Add the probe-defer for the smi-larb device should waiting for smi-common. In mt2712, there are 2 smi-commons, 10 smi-larbs. All will be probe-defered by the power-domain, there is seldom case that smi-larb probe done before smi-common. then it will hang like this: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffff800a4e0000 [00000000] *pgd=00000000beffe003[ 17.610026] , *pud=00000000beffe003 ... [<ffffff800897fe04>] mtk_smi_enable+0x1c/0xd0 [<ffffff800897fee8>] mtk_smi_larb_get+0x30/0x98 [<ffffff80088edfa8>] mtk_mipicsi0_resume+0x38/0x1b8 [<ffffff8008634f44>] pm_generic_runtime_resume+0x3c/0x58 [<ffffff8008644ff8>] __genpd_runtime_resume+0x38/0x98 [<ffffff8008647434>] genpd_runtime_resume+0x164/0x220 [<ffffff80086372f8>] __rpm_callback+0x78/0xa0 [<ffffff8008637358>] rpm_callback+0x38/0xa0 [<ffffff8008638a4c>] rpm_resume+0x4a4/0x6f8 [<ffffff8008638d04>] __pm_runtime_resume+0x64/0xa0 [<ffffff80088ed05c>] mtk_mipicsi0_probe+0x40c/0xb70 [<ffffff800862cdc0>] platform_drv_probe+0x58/0xc0 [<ffffff800862a514>] driver_probe_device+0x284/0x438 [<ffffff800862a8ac>] __device_attach_driver+0xb4/0x160 [<ffffff8008627d58>] bus_for_each_drv+0x68/0xa8 [<ffffff800862a0a4>] __device_attach+0xd4/0x168 [<ffffff800862a9d4>] device_initial_probe+0x24/0x30 [<ffffff80086291d8>] bus_probe_device+0xa0/0xa8 [<ffffff8008629784>] deferred_probe_work_func+0x94/0xf0 [<ffffff80080f03a8>] process_one_work+0x1d8/0x6e0 Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
456 lines
11 KiB
C
456 lines
11 KiB
C
/*
|
|
* Copyright (c) 2015-2016 MediaTek Inc.
|
|
* Author: Yong Wu <yong.wu@mediatek.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/component.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <soc/mediatek/smi.h>
|
|
#include <dt-bindings/memory/mt2701-larb-port.h>
|
|
|
|
/* mt8173 */
|
|
#define SMI_LARB_MMU_EN 0xf00
|
|
|
|
/* mt2701 */
|
|
#define REG_SMI_SECUR_CON_BASE 0x5c0
|
|
|
|
/* every register control 8 port, register offset 0x4 */
|
|
#define REG_SMI_SECUR_CON_OFFSET(id) (((id) >> 3) << 2)
|
|
#define REG_SMI_SECUR_CON_ADDR(id) \
|
|
(REG_SMI_SECUR_CON_BASE + REG_SMI_SECUR_CON_OFFSET(id))
|
|
|
|
/*
|
|
* every port have 4 bit to control, bit[port + 3] control virtual or physical,
|
|
* bit[port + 2 : port + 1] control the domain, bit[port] control the security
|
|
* or non-security.
|
|
*/
|
|
#define SMI_SECUR_CON_VAL_MSK(id) (~(0xf << (((id) & 0x7) << 2)))
|
|
#define SMI_SECUR_CON_VAL_VIRT(id) BIT((((id) & 0x7) << 2) + 3)
|
|
/* mt2701 domain should be set to 3 */
|
|
#define SMI_SECUR_CON_VAL_DOMAIN(id) (0x3 << ((((id) & 0x7) << 2) + 1))
|
|
|
|
/* mt2712 */
|
|
#define SMI_LARB_NONSEC_CON(id) (0x380 + ((id) * 4))
|
|
#define F_MMU_EN BIT(0)
|
|
|
|
struct mtk_smi_larb_gen {
|
|
bool need_larbid;
|
|
int port_in_larb[MTK_LARB_NR_MAX + 1];
|
|
void (*config_port)(struct device *);
|
|
};
|
|
|
|
struct mtk_smi {
|
|
struct device *dev;
|
|
struct clk *clk_apb, *clk_smi;
|
|
struct clk *clk_async; /*only needed by mt2701*/
|
|
void __iomem *smi_ao_base;
|
|
};
|
|
|
|
struct mtk_smi_larb { /* larb: local arbiter */
|
|
struct mtk_smi smi;
|
|
void __iomem *base;
|
|
struct device *smi_common_dev;
|
|
const struct mtk_smi_larb_gen *larb_gen;
|
|
int larbid;
|
|
u32 *mmu;
|
|
};
|
|
|
|
enum mtk_smi_gen {
|
|
MTK_SMI_GEN1,
|
|
MTK_SMI_GEN2
|
|
};
|
|
|
|
static int mtk_smi_enable(const struct mtk_smi *smi)
|
|
{
|
|
int ret;
|
|
|
|
ret = pm_runtime_get_sync(smi->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(smi->clk_apb);
|
|
if (ret)
|
|
goto err_put_pm;
|
|
|
|
ret = clk_prepare_enable(smi->clk_smi);
|
|
if (ret)
|
|
goto err_disable_apb;
|
|
|
|
return 0;
|
|
|
|
err_disable_apb:
|
|
clk_disable_unprepare(smi->clk_apb);
|
|
err_put_pm:
|
|
pm_runtime_put_sync(smi->dev);
|
|
return ret;
|
|
}
|
|
|
|
static void mtk_smi_disable(const struct mtk_smi *smi)
|
|
{
|
|
clk_disable_unprepare(smi->clk_smi);
|
|
clk_disable_unprepare(smi->clk_apb);
|
|
pm_runtime_put_sync(smi->dev);
|
|
}
|
|
|
|
int mtk_smi_larb_get(struct device *larbdev)
|
|
{
|
|
struct mtk_smi_larb *larb = dev_get_drvdata(larbdev);
|
|
const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
|
|
struct mtk_smi *common = dev_get_drvdata(larb->smi_common_dev);
|
|
int ret;
|
|
|
|
/* Enable the smi-common's power and clocks */
|
|
ret = mtk_smi_enable(common);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable the larb's power and clocks */
|
|
ret = mtk_smi_enable(&larb->smi);
|
|
if (ret) {
|
|
mtk_smi_disable(common);
|
|
return ret;
|
|
}
|
|
|
|
/* Configure the iommu info for this larb */
|
|
larb_gen->config_port(larbdev);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_smi_larb_get);
|
|
|
|
void mtk_smi_larb_put(struct device *larbdev)
|
|
{
|
|
struct mtk_smi_larb *larb = dev_get_drvdata(larbdev);
|
|
struct mtk_smi *common = dev_get_drvdata(larb->smi_common_dev);
|
|
|
|
/*
|
|
* Don't de-configure the iommu info for this larb since there may be
|
|
* several modules in this larb.
|
|
* The iommu info will be reset after power off.
|
|
*/
|
|
|
|
mtk_smi_disable(&larb->smi);
|
|
mtk_smi_disable(common);
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_smi_larb_put);
|
|
|
|
static int
|
|
mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
|
|
{
|
|
struct mtk_smi_larb *larb = dev_get_drvdata(dev);
|
|
struct mtk_smi_iommu *smi_iommu = data;
|
|
unsigned int i;
|
|
|
|
if (larb->larb_gen->need_larbid) {
|
|
larb->mmu = &smi_iommu->larb_imu[larb->larbid].mmu;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If there is no larbid property, Loop to find the corresponding
|
|
* iommu information.
|
|
*/
|
|
for (i = 0; i < smi_iommu->larb_nr; i++) {
|
|
if (dev == smi_iommu->larb_imu[i].dev) {
|
|
/* The 'mmu' may be updated in iommu-attach/detach. */
|
|
larb->mmu = &smi_iommu->larb_imu[i].mmu;
|
|
return 0;
|
|
}
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void mtk_smi_larb_config_port_mt2712(struct device *dev)
|
|
{
|
|
struct mtk_smi_larb *larb = dev_get_drvdata(dev);
|
|
u32 reg;
|
|
int i;
|
|
|
|
/*
|
|
* larb 8/9 is the bdpsys larb, the iommu_en is enabled defaultly.
|
|
* Don't need to set it again.
|
|
*/
|
|
if (larb->larbid == 8 || larb->larbid == 9)
|
|
return;
|
|
|
|
for_each_set_bit(i, (unsigned long *)larb->mmu, 32) {
|
|
reg = readl_relaxed(larb->base + SMI_LARB_NONSEC_CON(i));
|
|
reg |= F_MMU_EN;
|
|
writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
|
|
}
|
|
}
|
|
|
|
static void mtk_smi_larb_config_port_mt8173(struct device *dev)
|
|
{
|
|
struct mtk_smi_larb *larb = dev_get_drvdata(dev);
|
|
|
|
writel(*larb->mmu, larb->base + SMI_LARB_MMU_EN);
|
|
}
|
|
|
|
static void mtk_smi_larb_config_port_gen1(struct device *dev)
|
|
{
|
|
struct mtk_smi_larb *larb = dev_get_drvdata(dev);
|
|
const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
|
|
struct mtk_smi *common = dev_get_drvdata(larb->smi_common_dev);
|
|
int i, m4u_port_id, larb_port_num;
|
|
u32 sec_con_val, reg_val;
|
|
|
|
m4u_port_id = larb_gen->port_in_larb[larb->larbid];
|
|
larb_port_num = larb_gen->port_in_larb[larb->larbid + 1]
|
|
- larb_gen->port_in_larb[larb->larbid];
|
|
|
|
for (i = 0; i < larb_port_num; i++, m4u_port_id++) {
|
|
if (*larb->mmu & BIT(i)) {
|
|
/* bit[port + 3] controls the virtual or physical */
|
|
sec_con_val = SMI_SECUR_CON_VAL_VIRT(m4u_port_id);
|
|
} else {
|
|
/* do not need to enable m4u for this port */
|
|
continue;
|
|
}
|
|
reg_val = readl(common->smi_ao_base
|
|
+ REG_SMI_SECUR_CON_ADDR(m4u_port_id));
|
|
reg_val &= SMI_SECUR_CON_VAL_MSK(m4u_port_id);
|
|
reg_val |= sec_con_val;
|
|
reg_val |= SMI_SECUR_CON_VAL_DOMAIN(m4u_port_id);
|
|
writel(reg_val,
|
|
common->smi_ao_base
|
|
+ REG_SMI_SECUR_CON_ADDR(m4u_port_id));
|
|
}
|
|
}
|
|
|
|
static void
|
|
mtk_smi_larb_unbind(struct device *dev, struct device *master, void *data)
|
|
{
|
|
/* Do nothing as the iommu is always enabled. */
|
|
}
|
|
|
|
static const struct component_ops mtk_smi_larb_component_ops = {
|
|
.bind = mtk_smi_larb_bind,
|
|
.unbind = mtk_smi_larb_unbind,
|
|
};
|
|
|
|
static const struct mtk_smi_larb_gen mtk_smi_larb_mt8173 = {
|
|
/* mt8173 do not need the port in larb */
|
|
.config_port = mtk_smi_larb_config_port_mt8173,
|
|
};
|
|
|
|
static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
|
|
.need_larbid = true,
|
|
.port_in_larb = {
|
|
LARB0_PORT_OFFSET, LARB1_PORT_OFFSET,
|
|
LARB2_PORT_OFFSET, LARB3_PORT_OFFSET
|
|
},
|
|
.config_port = mtk_smi_larb_config_port_gen1,
|
|
};
|
|
|
|
static const struct mtk_smi_larb_gen mtk_smi_larb_mt2712 = {
|
|
.need_larbid = true,
|
|
.config_port = mtk_smi_larb_config_port_mt2712,
|
|
};
|
|
|
|
static const struct of_device_id mtk_smi_larb_of_ids[] = {
|
|
{
|
|
.compatible = "mediatek,mt8173-smi-larb",
|
|
.data = &mtk_smi_larb_mt8173
|
|
},
|
|
{
|
|
.compatible = "mediatek,mt2701-smi-larb",
|
|
.data = &mtk_smi_larb_mt2701
|
|
},
|
|
{
|
|
.compatible = "mediatek,mt2712-smi-larb",
|
|
.data = &mtk_smi_larb_mt2712
|
|
},
|
|
{}
|
|
};
|
|
|
|
static int mtk_smi_larb_probe(struct platform_device *pdev)
|
|
{
|
|
struct mtk_smi_larb *larb;
|
|
struct resource *res;
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *smi_node;
|
|
struct platform_device *smi_pdev;
|
|
int err;
|
|
|
|
larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL);
|
|
if (!larb)
|
|
return -ENOMEM;
|
|
|
|
larb->larb_gen = of_device_get_match_data(dev);
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
larb->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(larb->base))
|
|
return PTR_ERR(larb->base);
|
|
|
|
larb->smi.clk_apb = devm_clk_get(dev, "apb");
|
|
if (IS_ERR(larb->smi.clk_apb))
|
|
return PTR_ERR(larb->smi.clk_apb);
|
|
|
|
larb->smi.clk_smi = devm_clk_get(dev, "smi");
|
|
if (IS_ERR(larb->smi.clk_smi))
|
|
return PTR_ERR(larb->smi.clk_smi);
|
|
larb->smi.dev = dev;
|
|
|
|
if (larb->larb_gen->need_larbid) {
|
|
err = of_property_read_u32(dev->of_node, "mediatek,larb-id",
|
|
&larb->larbid);
|
|
if (err) {
|
|
dev_err(dev, "missing larbid property\n");
|
|
return err;
|
|
}
|
|
}
|
|
|
|
smi_node = of_parse_phandle(dev->of_node, "mediatek,smi", 0);
|
|
if (!smi_node)
|
|
return -EINVAL;
|
|
|
|
smi_pdev = of_find_device_by_node(smi_node);
|
|
of_node_put(smi_node);
|
|
if (smi_pdev) {
|
|
if (!platform_get_drvdata(smi_pdev))
|
|
return -EPROBE_DEFER;
|
|
larb->smi_common_dev = &smi_pdev->dev;
|
|
} else {
|
|
dev_err(dev, "Failed to get the smi_common device\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pm_runtime_enable(dev);
|
|
platform_set_drvdata(pdev, larb);
|
|
return component_add(dev, &mtk_smi_larb_component_ops);
|
|
}
|
|
|
|
static int mtk_smi_larb_remove(struct platform_device *pdev)
|
|
{
|
|
pm_runtime_disable(&pdev->dev);
|
|
component_del(&pdev->dev, &mtk_smi_larb_component_ops);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mtk_smi_larb_driver = {
|
|
.probe = mtk_smi_larb_probe,
|
|
.remove = mtk_smi_larb_remove,
|
|
.driver = {
|
|
.name = "mtk-smi-larb",
|
|
.of_match_table = mtk_smi_larb_of_ids,
|
|
}
|
|
};
|
|
|
|
static const struct of_device_id mtk_smi_common_of_ids[] = {
|
|
{
|
|
.compatible = "mediatek,mt8173-smi-common",
|
|
.data = (void *)MTK_SMI_GEN2
|
|
},
|
|
{
|
|
.compatible = "mediatek,mt2701-smi-common",
|
|
.data = (void *)MTK_SMI_GEN1
|
|
},
|
|
{
|
|
.compatible = "mediatek,mt2712-smi-common",
|
|
.data = (void *)MTK_SMI_GEN2
|
|
},
|
|
{}
|
|
};
|
|
|
|
static int mtk_smi_common_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct mtk_smi *common;
|
|
struct resource *res;
|
|
enum mtk_smi_gen smi_gen;
|
|
int ret;
|
|
|
|
common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
|
|
if (!common)
|
|
return -ENOMEM;
|
|
common->dev = dev;
|
|
|
|
common->clk_apb = devm_clk_get(dev, "apb");
|
|
if (IS_ERR(common->clk_apb))
|
|
return PTR_ERR(common->clk_apb);
|
|
|
|
common->clk_smi = devm_clk_get(dev, "smi");
|
|
if (IS_ERR(common->clk_smi))
|
|
return PTR_ERR(common->clk_smi);
|
|
|
|
/*
|
|
* for mtk smi gen 1, we need to get the ao(always on) base to config
|
|
* m4u port, and we need to enable the aync clock for transform the smi
|
|
* clock into emi clock domain, but for mtk smi gen2, there's no smi ao
|
|
* base.
|
|
*/
|
|
smi_gen = (enum mtk_smi_gen)of_device_get_match_data(dev);
|
|
if (smi_gen == MTK_SMI_GEN1) {
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
common->smi_ao_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(common->smi_ao_base))
|
|
return PTR_ERR(common->smi_ao_base);
|
|
|
|
common->clk_async = devm_clk_get(dev, "async");
|
|
if (IS_ERR(common->clk_async))
|
|
return PTR_ERR(common->clk_async);
|
|
|
|
ret = clk_prepare_enable(common->clk_async);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
pm_runtime_enable(dev);
|
|
platform_set_drvdata(pdev, common);
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_smi_common_remove(struct platform_device *pdev)
|
|
{
|
|
pm_runtime_disable(&pdev->dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mtk_smi_common_driver = {
|
|
.probe = mtk_smi_common_probe,
|
|
.remove = mtk_smi_common_remove,
|
|
.driver = {
|
|
.name = "mtk-smi-common",
|
|
.of_match_table = mtk_smi_common_of_ids,
|
|
}
|
|
};
|
|
|
|
static int __init mtk_smi_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = platform_driver_register(&mtk_smi_common_driver);
|
|
if (ret != 0) {
|
|
pr_err("Failed to register SMI driver\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = platform_driver_register(&mtk_smi_larb_driver);
|
|
if (ret != 0) {
|
|
pr_err("Failed to register SMI-LARB driver\n");
|
|
goto err_unreg_smi;
|
|
}
|
|
return ret;
|
|
|
|
err_unreg_smi:
|
|
platform_driver_unregister(&mtk_smi_common_driver);
|
|
return ret;
|
|
}
|
|
|
|
module_init(mtk_smi_init);
|