kernel-fxtec-pro1x/drivers/gpio/gpio-it87.c
Leonid Bloch a5ec96ddfd gpio: it87: Add support for IT8613
This was tested on actual hardware and found to work fine, but currently
the official specifications of this chip could not be obtained to
confirm the numbers.

Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10 23:19:17 +02:00

432 lines
9.7 KiB
C

/*
* GPIO interface for IT87xx Super I/O chips
*
* Author: Diego Elio Pettenò <flameeyes@flameeyes.eu>
* Copyright (c) 2017 Google, Inc.
*
* Based on it87_wdt.c by Oliver Schuster
* gpio-it8761e.c by Denis Turischev
* gpio-stmpe.c by Rabin Vincent
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/gpio/driver.h>
/* Chip Id numbers */
#define NO_DEV_ID 0xffff
#define IT8613_ID 0x8613
#define IT8620_ID 0x8620
#define IT8628_ID 0x8628
#define IT8718_ID 0x8718
#define IT8728_ID 0x8728
#define IT8732_ID 0x8732
#define IT8761_ID 0x8761
#define IT8772_ID 0x8772
#define IT8786_ID 0x8786
/* IO Ports */
#define REG 0x2e
#define VAL 0x2f
/* Logical device Numbers LDN */
#define GPIO 0x07
/* Configuration Registers and Functions */
#define LDNREG 0x07
#define CHIPID 0x20
#define CHIPREV 0x22
/**
* struct it87_gpio - it87-specific GPIO chip
* @chip the underlying gpio_chip structure
* @lock a lock to avoid races between operations
* @io_base base address for gpio ports
* @io_size size of the port rage starting from io_base.
* @output_base Super I/O register address for Output Enable register
* @simple_base Super I/O 'Simple I/O' Enable register
* @simple_size Super IO 'Simple I/O' Enable register size; this is
* required because IT87xx chips might only provide Simple I/O
* switches on a subset of lines, whereas the others keep the
* same status all time.
*/
struct it87_gpio {
struct gpio_chip chip;
spinlock_t lock;
u16 io_base;
u16 io_size;
u8 output_base;
u8 simple_base;
u8 simple_size;
};
static struct it87_gpio it87_gpio_chip = {
.lock = __SPIN_LOCK_UNLOCKED(it87_gpio_chip.lock),
};
/* Superio chip access functions; copied from wdt_it87 */
static inline int superio_enter(void)
{
/*
* Try to reserve REG and REG + 1 for exclusive access.
*/
if (!request_muxed_region(REG, 2, KBUILD_MODNAME))
return -EBUSY;
outb(0x87, REG);
outb(0x01, REG);
outb(0x55, REG);
outb(0x55, REG);
return 0;
}
static inline void superio_exit(void)
{
outb(0x02, REG);
outb(0x02, VAL);
release_region(REG, 2);
}
static inline void superio_select(int ldn)
{
outb(LDNREG, REG);
outb(ldn, VAL);
}
static inline int superio_inb(int reg)
{
outb(reg, REG);
return inb(VAL);
}
static inline void superio_outb(int val, int reg)
{
outb(reg, REG);
outb(val, VAL);
}
static inline int superio_inw(int reg)
{
int val;
outb(reg++, REG);
val = inb(VAL) << 8;
outb(reg, REG);
val |= inb(VAL);
return val;
}
static inline void superio_outw(int val, int reg)
{
outb(reg++, REG);
outb(val >> 8, VAL);
outb(reg, REG);
outb(val, VAL);
}
static inline void superio_set_mask(int mask, int reg)
{
u8 curr_val = superio_inb(reg);
u8 new_val = curr_val | mask;
if (curr_val != new_val)
superio_outb(new_val, reg);
}
static inline void superio_clear_mask(int mask, int reg)
{
u8 curr_val = superio_inb(reg);
u8 new_val = curr_val & ~mask;
if (curr_val != new_val)
superio_outb(new_val, reg);
}
static int it87_gpio_request(struct gpio_chip *chip, unsigned gpio_num)
{
u8 mask, group;
int rc = 0;
struct it87_gpio *it87_gpio = gpiochip_get_data(chip);
mask = 1 << (gpio_num % 8);
group = (gpio_num / 8);
spin_lock(&it87_gpio->lock);
rc = superio_enter();
if (rc)
goto exit;
/* not all the IT87xx chips support Simple I/O and not all of
* them allow all the lines to be set/unset to Simple I/O.
*/
if (group < it87_gpio->simple_size)
superio_set_mask(mask, group + it87_gpio->simple_base);
/* clear output enable, setting the pin to input, as all the
* newly-exported GPIO interfaces are set to input.
*/
superio_clear_mask(mask, group + it87_gpio->output_base);
superio_exit();
exit:
spin_unlock(&it87_gpio->lock);
return rc;
}
static int it87_gpio_get(struct gpio_chip *chip, unsigned gpio_num)
{
u16 reg;
u8 mask;
struct it87_gpio *it87_gpio = gpiochip_get_data(chip);
mask = 1 << (gpio_num % 8);
reg = (gpio_num / 8) + it87_gpio->io_base;
return !!(inb(reg) & mask);
}
static int it87_gpio_direction_in(struct gpio_chip *chip, unsigned gpio_num)
{
u8 mask, group;
int rc = 0;
struct it87_gpio *it87_gpio = gpiochip_get_data(chip);
mask = 1 << (gpio_num % 8);
group = (gpio_num / 8);
spin_lock(&it87_gpio->lock);
rc = superio_enter();
if (rc)
goto exit;
/* clear the output enable bit */
superio_clear_mask(mask, group + it87_gpio->output_base);
superio_exit();
exit:
spin_unlock(&it87_gpio->lock);
return rc;
}
static void it87_gpio_set(struct gpio_chip *chip,
unsigned gpio_num, int val)
{
u8 mask, curr_vals;
u16 reg;
struct it87_gpio *it87_gpio = gpiochip_get_data(chip);
mask = 1 << (gpio_num % 8);
reg = (gpio_num / 8) + it87_gpio->io_base;
curr_vals = inb(reg);
if (val)
outb(curr_vals | mask, reg);
else
outb(curr_vals & ~mask, reg);
}
static int it87_gpio_direction_out(struct gpio_chip *chip,
unsigned gpio_num, int val)
{
u8 mask, group;
int rc = 0;
struct it87_gpio *it87_gpio = gpiochip_get_data(chip);
mask = 1 << (gpio_num % 8);
group = (gpio_num / 8);
spin_lock(&it87_gpio->lock);
rc = superio_enter();
if (rc)
goto exit;
/* set the output enable bit */
superio_set_mask(mask, group + it87_gpio->output_base);
it87_gpio_set(chip, gpio_num, val);
superio_exit();
exit:
spin_unlock(&it87_gpio->lock);
return rc;
}
static const struct gpio_chip it87_template_chip = {
.label = KBUILD_MODNAME,
.owner = THIS_MODULE,
.request = it87_gpio_request,
.get = it87_gpio_get,
.direction_input = it87_gpio_direction_in,
.set = it87_gpio_set,
.direction_output = it87_gpio_direction_out,
.base = -1
};
static int __init it87_gpio_init(void)
{
int rc = 0, i;
u16 chip_type;
u8 chip_rev, gpio_ba_reg;
char *labels, **labels_table;
struct it87_gpio *it87_gpio = &it87_gpio_chip;
rc = superio_enter();
if (rc)
return rc;
chip_type = superio_inw(CHIPID);
chip_rev = superio_inb(CHIPREV) & 0x0f;
superio_exit();
it87_gpio->chip = it87_template_chip;
switch (chip_type) {
case IT8613_ID:
gpio_ba_reg = 0x62;
it87_gpio->io_size = 8; /* it8613 only needs 6, use 8 for alignment */
it87_gpio->output_base = 0xc8;
it87_gpio->simple_base = 0xc0;
it87_gpio->simple_size = 6;
it87_gpio->chip.ngpio = 64; /* has 48, use 64 for convenient calc */
break;
case IT8620_ID:
case IT8628_ID:
gpio_ba_reg = 0x62;
it87_gpio->io_size = 11;
it87_gpio->output_base = 0xc8;
it87_gpio->simple_size = 0;
it87_gpio->chip.ngpio = 64;
break;
case IT8718_ID:
case IT8728_ID:
case IT8732_ID:
case IT8772_ID:
case IT8786_ID:
gpio_ba_reg = 0x62;
it87_gpio->io_size = 8;
it87_gpio->output_base = 0xc8;
it87_gpio->simple_base = 0xc0;
it87_gpio->simple_size = 5;
it87_gpio->chip.ngpio = 64;
break;
case IT8761_ID:
gpio_ba_reg = 0x60;
it87_gpio->io_size = 4;
it87_gpio->output_base = 0xf0;
it87_gpio->simple_size = 0;
it87_gpio->chip.ngpio = 16;
break;
case NO_DEV_ID:
pr_err("no device\n");
return -ENODEV;
default:
pr_err("Unknown Chip found, Chip %04x Revision %x\n",
chip_type, chip_rev);
return -ENODEV;
}
rc = superio_enter();
if (rc)
return rc;
superio_select(GPIO);
/* fetch GPIO base address */
it87_gpio->io_base = superio_inw(gpio_ba_reg);
superio_exit();
pr_info("Found Chip IT%04x rev %x. %u GPIO lines starting at %04xh\n",
chip_type, chip_rev, it87_gpio->chip.ngpio,
it87_gpio->io_base);
if (!request_region(it87_gpio->io_base, it87_gpio->io_size,
KBUILD_MODNAME))
return -EBUSY;
/* Set up aliases for the GPIO connection.
*
* ITE documentation for recent chips such as the IT8728F
* refers to the GPIO lines as GPxy, with a coordinates system
* where x is the GPIO group (starting from 1) and y is the
* bit within the group.
*
* By creating these aliases, we make it easier to understand
* to which GPIO pin we're referring to.
*/
labels = kcalloc(it87_gpio->chip.ngpio, sizeof("it87_gpXY"),
GFP_KERNEL);
labels_table = kcalloc(it87_gpio->chip.ngpio, sizeof(const char *),
GFP_KERNEL);
if (!labels || !labels_table) {
rc = -ENOMEM;
goto labels_free;
}
for (i = 0; i < it87_gpio->chip.ngpio; i++) {
char *label = &labels[i * sizeof("it87_gpXY")];
sprintf(label, "it87_gp%u%u", 1+(i/8), i%8);
labels_table[i] = label;
}
it87_gpio->chip.names = (const char *const*)labels_table;
rc = gpiochip_add_data(&it87_gpio->chip, it87_gpio);
if (rc)
goto labels_free;
return 0;
labels_free:
kfree(labels_table);
kfree(labels);
release_region(it87_gpio->io_base, it87_gpio->io_size);
return rc;
}
static void __exit it87_gpio_exit(void)
{
struct it87_gpio *it87_gpio = &it87_gpio_chip;
gpiochip_remove(&it87_gpio->chip);
release_region(it87_gpio->io_base, it87_gpio->io_size);
kfree(it87_gpio->chip.names[0]);
kfree(it87_gpio->chip.names);
}
module_init(it87_gpio_init);
module_exit(it87_gpio_exit);
MODULE_AUTHOR("Diego Elio Pettenò <flameeyes@flameeyes.eu>");
MODULE_DESCRIPTION("GPIO interface for IT87xx Super I/O chips");
MODULE_LICENSE("GPL");