Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/net/wireless/iwlwifi/iwl-6000.c
Wey-Yi Guy aeb4a2eec2 iwlagn: wifi/bt coex configuration sequence 
bt config command need to send before the init calibration command,
driver need to let uCode know that calibrations are being performed now
in order to assure antenna is not being taken to BT use during radio/dsp
reads/writes

Also, bt_coex_priorty_table command need to be send right after the
bt_config_command during init sequence. Followed by bt coex envelope
command to initialize and prepare uCode bt state machine

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25 14:34:19 -04:00

1298 lines
43 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-sta.h"
#include "iwl-agn.h"
#include "iwl-helpers.h"
#include "iwl-agn-hw.h"
#include "iwl-6000-hw.h"
#include "iwl-agn-led.h"
#include "iwl-agn-debugfs.h"
/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 4
#define IWL6050_UCODE_API_MAX 4
#define IWL6000G2_UCODE_API_MAX 5
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 4
#define IWL6050_UCODE_API_MIN 4
#define IWL6000G2_UCODE_API_MIN 4
#define IWL6000_FW_PRE "iwlwifi-6000-"
#define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
#define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
#define IWL6050_FW_PRE "iwlwifi-6050-"
#define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
#define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
#define IWL6000G2A_FW_PRE "iwlwifi-6000g2a-"
#define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode"
#define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api)
#define IWL6000G2B_FW_PRE "iwlwifi-6000g2b-"
#define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode"
#define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api)
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
/* want Celsius */
priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
}
/* Indicate calibration version to uCode. */
static void iwl6000_set_calib_version(struct iwl_priv *priv)
{
if (priv->cfg->need_dc_calib &&
(priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6))
iwl_set_bit(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
}
/* NIC configuration for 6000 series */
static void iwl6000_nic_config(struct iwl_priv *priv)
{
u16 radio_cfg;
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
/* write radio config values to register */
if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
EEPROM_RF_CFG_DASH_MSK(radio_cfg));
/* set CSR_HW_CONFIG_REG for uCode use */
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
/* no locking required for register write */
if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
/* 2x2 IPA phy type */
iwl_write32(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
}
/* else do nothing, uCode configured */
if (priv->cfg->ops->lib->temp_ops.set_calib_version)
priv->cfg->ops->lib->temp_ops.set_calib_version(priv);
}
/*
* Macros to access the lookup table.
*
* The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req,
* wifi_prio, wifi_txrx and wifi_sh_ant_req.
*
* It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH
*
* The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits
* one after another in 32-bit registers, and "registers" 0 through 7 contain
* the WLAN_KILL and ANT_SWITCH bits interleaved (in that order).
*
* These macros encode that format.
*/
#define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \
wifi_txrx, wifi_sh_ant_req) \
(bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \
(wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6))
#define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \
lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f)))
#define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req) \
(!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx,\
bt_rf_act, wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
#define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req) \
LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \
bt_rf_act, wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
#define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req) \
LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \
bt_rf_act, wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
#define LUT_WLAN_KILL_OP(lut, op, val) \
lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e)))
#define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
wifi_prio, wifi_txrx, wifi_sh_ant_req) \
(!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
#define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
wifi_prio, wifi_txrx, wifi_sh_ant_req) \
LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
#define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
wifi_prio, wifi_txrx, wifi_sh_ant_req) \
LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
#define LUT_ANT_SWITCH_OP(lut, op, val) \
lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1)))
#define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
wifi_prio, wifi_txrx, wifi_sh_ant_req) \
(!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
#define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
wifi_prio, wifi_txrx, wifi_sh_ant_req) \
LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
#define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
wifi_prio, wifi_txrx, wifi_sh_ant_req) \
LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
static const __le32 iwl6000g2b_def_3w_lookup[12] = {
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaeaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xcc00ff28),
cpu_to_le32(0x0000aaaa),
cpu_to_le32(0xcc00aaaa),
cpu_to_le32(0x0000aaaa),
cpu_to_le32(0xc0004000),
cpu_to_le32(0x00004000),
cpu_to_le32(0xf0005000),
cpu_to_le32(0xf0004000),
};
static const __le32 iwl6000g2b_concurrent_lookup[12] = {
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0x00000000),
cpu_to_le32(0x00000000),
cpu_to_le32(0x00000000),
cpu_to_le32(0x00000000),
};
static void iwl6000g2b_send_bt_config(struct iwl_priv *priv)
{
struct iwl6000g2b_bt_cmd bt_cmd = {
.prio_boost = IWL6000G2B_BT_PRIO_BOOST_DEFAULT,
.max_kill = IWL6000G2B_BT_MAX_KILL_DEFAULT,
.bt3_timer_t7_value = IWL6000G2B_BT3_T7_DEFAULT,
.kill_ack_mask = IWL6000G2B_BT_KILL_ACK_MASK_DEFAULT,
.kill_cts_mask = IWL6000G2B_BT_KILL_CTS_MASK_DEFAULT,
.bt3_prio_sample_time = IWL6000G2B_BT3_PRIO_SAMPLE_DEFAULT,
.bt3_timer_t2_value = IWL6000G2B_BT3_T2_DEFAULT,
.valid = IWL6000G2B_BT_VALID_ENABLE_FLAGS,
};
BUILD_BUG_ON(sizeof(iwl6000g2b_def_3w_lookup) !=
sizeof(bt_cmd.bt3_lookup_table));
/*
* Configure BT coex mode to "no coexistence" when the
* user disabled BT coexistence, we have no interface
* user disabled BT coexistence, or the interface is in
* IBSS mode (no proper uCode support for coex then).
*/
if (!bt_coex_active || priv->iw_mode == NL80211_IFTYPE_ADHOC) {
bt_cmd.flags = 0;
} else {
bt_cmd.flags = IWL6000G2B_BT_FLAG_CHANNEL_INHIBITION |
IWL6000G2B_BT_FLAG_COEX_MODE_3W <<
IWL6000G2B_BT_FLAG_COEX_MODE_SHIFT;
bt_cmd.valid |= IWL6000G2B_BT_ALL_VALID_MSK;
}
if (priv->bt_full_concurrent)
memcpy(bt_cmd.bt3_lookup_table, iwl6000g2b_concurrent_lookup,
sizeof(iwl6000g2b_concurrent_lookup));
else
memcpy(bt_cmd.bt3_lookup_table, iwl6000g2b_def_3w_lookup,
sizeof(iwl6000g2b_def_3w_lookup));
IWL_DEBUG_INFO(priv, "BT coex %s in %s mode\n",
bt_cmd.flags ? "active" : "disabled",
priv->bt_full_concurrent ?
"full concurrency" : "3-wire");
if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(bt_cmd), &bt_cmd))
IWL_ERR(priv, "failed to send BT Coex Config\n");
/*
* When we are doing a restart, need to also reconfigure BT
* SCO to the device. If not doing a restart, bt_sco_active
* will always be false, so there's no need to have an extra
* variable to check for it.
*/
if (priv->bt_sco_active) {
struct iwl6000g2b_bt_sco_cmd sco_cmd = { .flags = 0 };
if (priv->bt_sco_active)
sco_cmd.flags |= IWL6000G2B_BT_SCO_ACTIVE;
if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_SCO,
sizeof(sco_cmd), &sco_cmd))
IWL_ERR(priv, "failed to send BT SCO command\n");
}
}
static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
.min_nrg_cck = 97,
.max_nrg_cck = 0, /* not used, set to 0 */
.auto_corr_min_ofdm = 80,
.auto_corr_min_ofdm_mrc = 128,
.auto_corr_min_ofdm_x1 = 105,
.auto_corr_min_ofdm_mrc_x1 = 192,
.auto_corr_max_ofdm = 145,
.auto_corr_max_ofdm_mrc = 232,
.auto_corr_max_ofdm_x1 = 110,
.auto_corr_max_ofdm_mrc_x1 = 232,
.auto_corr_min_cck = 125,
.auto_corr_max_cck = 175,
.auto_corr_min_cck_mrc = 160,
.auto_corr_max_cck_mrc = 310,
.nrg_th_cck = 97,
.nrg_th_ofdm = 100,
.barker_corr_th_min = 190,
.barker_corr_th_min_mrc = 390,
.nrg_th_cca = 62,
};
static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
{
if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
priv->cfg->num_of_queues =
priv->cfg->mod_params->num_of_queues;
priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
priv->hw_params.scd_bc_tbls_size =
priv->cfg->num_of_queues *
sizeof(struct iwlagn_scd_bc_tbl);
priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
priv->hw_params.max_stations = IWLAGN_STATION_COUNT;
priv->hw_params.bcast_sta_id = IWLAGN_BROADCAST_ID;
priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
priv->hw_params.max_bsm_size = 0;
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
/* Set initial sensitivity parameters */
/* Set initial calibration set */
priv->hw_params.sens = &iwl6000_sensitivity;
priv->hw_params.calib_init_cfg =
BIT(IWL_CALIB_XTAL) |
BIT(IWL_CALIB_LO) |
BIT(IWL_CALIB_TX_IQ) |
BIT(IWL_CALIB_BASE_BAND);
if (priv->cfg->need_dc_calib)
priv->hw_params.calib_init_cfg |= BIT(IWL_CALIB_DC);
priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
return 0;
}
static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
struct ieee80211_channel_switch *ch_switch)
{
struct iwl6000_channel_switch_cmd cmd;
const struct iwl_channel_info *ch_info;
u32 switch_time_in_usec, ucode_switch_time;
u16 ch;
u32 tsf_low;
u8 switch_count;
u16 beacon_interval = le16_to_cpu(priv->rxon_timing.beacon_interval);
struct ieee80211_vif *vif = priv->vif;
struct iwl_host_cmd hcmd = {
.id = REPLY_CHANNEL_SWITCH,
.len = sizeof(cmd),
.flags = CMD_SYNC,
.data = &cmd,
};
cmd.band = priv->band == IEEE80211_BAND_2GHZ;
ch = ch_switch->channel->hw_value;
IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
priv->active_rxon.channel, ch);
cmd.channel = cpu_to_le16(ch);
cmd.rxon_flags = priv->staging_rxon.flags;
cmd.rxon_filter_flags = priv->staging_rxon.filter_flags;
switch_count = ch_switch->count;
tsf_low = ch_switch->timestamp & 0x0ffffffff;
/*
* calculate the ucode channel switch time
* adding TSF as one of the factor for when to switch
*/
if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
beacon_interval)) {
switch_count -= (priv->ucode_beacon_time -
tsf_low) / beacon_interval;
} else
switch_count = 0;
}
if (switch_count <= 1)
cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
else {
switch_time_in_usec =
vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
ucode_switch_time = iwl_usecs_to_beacons(priv,
switch_time_in_usec,
beacon_interval);
cmd.switch_time = iwl_add_beacon_time(priv,
priv->ucode_beacon_time,
ucode_switch_time,
beacon_interval);
}
IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
cmd.switch_time);
ch_info = iwl_get_channel_info(priv, priv->band, ch);
if (ch_info)
cmd.expect_beacon = is_channel_radar(ch_info);
else {
IWL_ERR(priv, "invalid channel switch from %u to %u\n",
priv->active_rxon.channel, ch);
return -EFAULT;
}
priv->switch_rxon.channel = cmd.channel;
priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
}
static void iwl6000g2b_bt_traffic_change_work(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, bt_traffic_change_work);
int smps_request = -1;
switch (priv->bt_traffic_load) {
case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
smps_request = IEEE80211_SMPS_AUTOMATIC;
break;
case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
smps_request = IEEE80211_SMPS_DYNAMIC;
break;
case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
smps_request = IEEE80211_SMPS_STATIC;
break;
default:
IWL_ERR(priv, "Invalid BT traffic load: %d\n",
priv->bt_traffic_load);
break;
}
mutex_lock(&priv->mutex);
if (smps_request != -1 &&
priv->vif && priv->vif->type == NL80211_IFTYPE_STATION)
ieee80211_request_smps(priv->vif, smps_request);
mutex_unlock(&priv->mutex);
}
static void iwl6000g2b_bt_coex_profile_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
unsigned long flags;
struct iwl_rx_packet *pkt = rxb_addr(rxb);
struct iwl_bt_coex_profile_notif *coex = &pkt->u.bt_coex_profile_notif;
struct iwl6000g2b_bt_sco_cmd sco_cmd = { .flags = 0 };
IWL_DEBUG_NOTIF(priv, "BT Coex notification:\n");
IWL_DEBUG_NOTIF(priv, " status: %d\n", coex->bt_status);
IWL_DEBUG_NOTIF(priv, " traffic load: %d\n", coex->bt_traffic_load);
IWL_DEBUG_NOTIF(priv, " CI compliance: %d\n", coex->bt_ci_compliance);
IWL_DEBUG_NOTIF(priv, " UART msg: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x:"
"%.2x:%.2x\n",
coex->uart_msg[0], coex->uart_msg[1], coex->uart_msg[2],
coex->uart_msg[3], coex->uart_msg[4], coex->uart_msg[5],
coex->uart_msg[6], coex->uart_msg[7]);
priv->notif_bt_traffic_load = coex->bt_traffic_load;
if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
if (coex->bt_traffic_load != priv->bt_traffic_load) {
priv->bt_traffic_load = coex->bt_traffic_load;
queue_work(priv->workqueue,
&priv->bt_traffic_change_work);
}
/* FIXME: add defines for this check */
priv->bt_sco_active = coex->uart_msg[3] & 1;
if (priv->bt_sco_active)
sco_cmd.flags |= IWL6000G2B_BT_SCO_ACTIVE;
iwl_send_cmd_pdu_async(priv, REPLY_BT_COEX_SCO,
sizeof(sco_cmd), &sco_cmd, NULL);
}
spin_lock_irqsave(&priv->lock, flags);
priv->bt_ci_compliance = coex->bt_ci_compliance;
spin_unlock_irqrestore(&priv->lock, flags);
}
void iwl6000g2b_rx_handler_setup(struct iwl_priv *priv)
{
iwlagn_rx_handler_setup(priv);
priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] =
iwl6000g2b_bt_coex_profile_notif;
}
static void iwl6000g2b_bt_setup_deferred_work(struct iwl_priv *priv)
{
iwlagn_setup_deferred_work(priv);
INIT_WORK(&priv->bt_traffic_change_work,
iwl6000g2b_bt_traffic_change_work);
}
static void iwl6000g2b_bt_cancel_deferred_work(struct iwl_priv *priv)
{
cancel_work_sync(&priv->bt_traffic_change_work);
}
static struct iwl_lib_ops iwl6000_lib = {
.set_hw_params = iwl6000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,
.txq_agg_enable = iwlagn_txq_agg_enable,
.txq_agg_disable = iwlagn_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.load_ucode = iwlagn_load_ucode,
.dump_nic_event_log = iwl_dump_nic_event_log,
.dump_nic_error_log = iwl_dump_nic_error_log,
.dump_csr = iwl_dump_csr,
.dump_fh = iwl_dump_fh,
.init_alive_start = iwlagn_init_alive_start,
.alive_notify = iwlagn_alive_notify,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl6000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.stop = iwl_apm_stop,
.config = iwl6000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
},
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REG_BAND_1_CHANNELS,
EEPROM_REG_BAND_2_CHANNELS,
EEPROM_REG_BAND_3_CHANNELS,
EEPROM_REG_BAND_4_CHANNELS,
EEPROM_REG_BAND_5_CHANNELS,
EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
EEPROM_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
.release_semaphore = iwlcore_eeprom_release_semaphore,
.calib_version = iwlagn_eeprom_calib_version,
.query_addr = iwlagn_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
.post_associate = iwl_post_associate,
.isr = iwl_isr_ict,
.config_ap = iwl_config_ap,
.temp_ops = {
.temperature = iwlagn_temperature,
.set_ct_kill = iwl6000_set_ct_threshold,
.set_calib_version = iwl6000_set_calib_version,
},
.manage_ibss_station = iwlagn_manage_ibss_station,
.update_bcast_station = iwl_update_bcast_station,
.debugfs_ops = {
.rx_stats_read = iwl_ucode_rx_stats_read,
.tx_stats_read = iwl_ucode_tx_stats_read,
.general_stats_read = iwl_ucode_general_stats_read,
.bt_stats_read = iwl_ucode_bt_stats_read,
},
.recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl_good_plcp_health,
.check_ack_health = iwl_good_ack_health,
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
.tt_ops = {
.lower_power_detection = iwl_tt_is_low_power_state,
.tt_power_mode = iwl_tt_current_power_mode,
.ct_kill_check = iwl_check_for_ct_kill,
}
};
static struct iwl_lib_ops iwl6000g2b_lib = {
.set_hw_params = iwl6000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,
.txq_agg_enable = iwlagn_txq_agg_enable,
.txq_agg_disable = iwlagn_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwl6000g2b_rx_handler_setup,
.setup_deferred_work = iwl6000g2b_bt_setup_deferred_work,
.cancel_deferred_work = iwl6000g2b_bt_cancel_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.load_ucode = iwlagn_load_ucode,
.dump_nic_event_log = iwl_dump_nic_event_log,
.dump_nic_error_log = iwl_dump_nic_error_log,
.dump_csr = iwl_dump_csr,
.dump_fh = iwl_dump_fh,
.init_alive_start = iwlagn_init_alive_start,
.alive_notify = iwlagn_alive_notify,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl6000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.stop = iwl_apm_stop,
.config = iwl6000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
},
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REG_BAND_1_CHANNELS,
EEPROM_REG_BAND_2_CHANNELS,
EEPROM_REG_BAND_3_CHANNELS,
EEPROM_REG_BAND_4_CHANNELS,
EEPROM_REG_BAND_5_CHANNELS,
EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
EEPROM_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
.release_semaphore = iwlcore_eeprom_release_semaphore,
.calib_version = iwlagn_eeprom_calib_version,
.query_addr = iwlagn_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
.post_associate = iwl_post_associate,
.isr = iwl_isr_ict,
.config_ap = iwl_config_ap,
.temp_ops = {
.temperature = iwlagn_temperature,
.set_ct_kill = iwl6000_set_ct_threshold,
.set_calib_version = iwl6000_set_calib_version,
},
.manage_ibss_station = iwlagn_manage_ibss_station,
.update_bcast_station = iwl_update_bcast_station,
.debugfs_ops = {
.rx_stats_read = iwl_ucode_rx_stats_read,
.tx_stats_read = iwl_ucode_tx_stats_read,
.general_stats_read = iwl_ucode_general_stats_read,
.bt_stats_read = iwl_ucode_bt_stats_read,
},
.recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl_good_plcp_health,
.check_ack_health = iwl_good_ack_health,
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
.tt_ops = {
.lower_power_detection = iwl_tt_is_low_power_state,
.tt_power_mode = iwl_tt_current_power_mode,
.ct_kill_check = iwl_check_for_ct_kill,
}
};
static const struct iwl_ops iwl6000_ops = {
.lib = &iwl6000_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
.led = &iwlagn_led_ops,
};
static struct iwl_hcmd_ops iwl6000g2b_hcmd = {
.rxon_assoc = iwlagn_send_rxon_assoc,
.commit_rxon = iwl_commit_rxon,
.set_rxon_chain = iwl_set_rxon_chain,
.set_tx_ant = iwlagn_send_tx_ant_config,
.send_bt_config = iwl6000g2b_send_bt_config,
};
static const struct iwl_ops iwl6000g2b_ops = {
.lib = &iwl6000g2b_lib,
.hcmd = &iwl6000g2b_hcmd,
.utils = &iwlagn_hcmd_utils,
.led = &iwlagn_led_ops,
};
struct iwl_cfg iwl6000g2a_2agn_cfg = {
.name = "6000 Series 2x2 AGN Gen2a",
.fw_name_pre = IWL6000G2A_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 512,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
};
struct iwl_cfg iwl6000g2a_2abg_cfg = {
.name = "6000 Series 2x2 ABG Gen2a",
.fw_name_pre = IWL6000G2A_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 512,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
};
struct iwl_cfg iwl6000g2a_2bg_cfg = {
.name = "6000 Series 2x2 BG Gen2a",
.fw_name_pre = IWL6000G2A_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_G,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 512,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
};
struct iwl_cfg iwl6000g2b_2agn_cfg = {
.name = "6000 Series 2x2 AGN Gen2b",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000g2b_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
.max_event_log_size = 512,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
.bt_statistics = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.advanced_bt_coexist = true,
};
struct iwl_cfg iwl6000g2b_2abg_cfg = {
.name = "6000 Series 2x2 ABG Gen2b",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.ops = &iwl6000g2b_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
.max_event_log_size = 512,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
.bt_statistics = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.advanced_bt_coexist = true,
};
struct iwl_cfg iwl6000g2b_2bgn_cfg = {
.name = "6000 Series 2x2 BGN Gen2b",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000g2b_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
.max_event_log_size = 512,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
.bt_statistics = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.advanced_bt_coexist = true,
};
struct iwl_cfg iwl6000g2b_2bg_cfg = {
.name = "6000 Series 2x2 BG Gen2b",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_G,
.ops = &iwl6000g2b_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
.max_event_log_size = 512,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
.bt_statistics = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.advanced_bt_coexist = true,
};
struct iwl_cfg iwl6000g2b_bgn_cfg = {
.name = "6000 Series 1x2 BGN Gen2b",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000g2b_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
.max_event_log_size = 512,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
.bt_statistics = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.advanced_bt_coexist = true,
};
struct iwl_cfg iwl6000g2b_bg_cfg = {
.name = "6000 Series 1x2 BG Gen2b",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_G,
.ops = &iwl6000g2b_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
.max_event_log_size = 512,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
.bt_statistics = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.advanced_bt_coexist = true,
};
/*
* "i": Internal configuration, use internal Power Amplifier
*/
struct iwl_cfg iwl6000i_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
};
struct iwl_cfg iwl6000i_2bg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_G,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
};
struct iwl_cfg iwl6050_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1500,
.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
};
struct iwl_cfg iwl6050g2_bgn_cfg = {
.name = "6050 Series 1x2 BGN Gen2",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6050G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6050G2_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1500,
.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
};
struct iwl_cfg iwl6050_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1500,
.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
};
struct iwl_cfg iwl6000_3agn_cfg = {
.name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_aggregation = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
Reference in a new issue View git blame Copy permalink