Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/usb/c67x00/c67x00.h
Greg Kroah-Hartman 12c3de7ef7 USB: c67x00: Remove redundant license text 
Now that the SPDX tag is in all USB files, that identifies the license
in a specific and legally-defined manner.  So the extra GPL text wording
can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07 15:45:02 +01:00

280 lines
8.5 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* c67x00.h: Cypress C67X00 USB register and field definitions
*
* Copyright (C) 2006-2008 Barco N.V.
* Derived from the Cypress cy7c67200/300 ezusb linux driver and
* based on multiple host controller drivers inside the linux kernel.
*/
#ifndef _USB_C67X00_H
#define _USB_C67X00_H
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/completion.h>
#include <linux/mutex.h>
/* ---------------------------------------------------------------------
* Cypress C67x00 register definitions
*/
/* Hardware Revision Register */
#define HW_REV_REG 0xC004
/* General USB registers */
/* ===================== */
/* USB Control Register */
#define USB_CTL_REG(x) ((x) ? 0xC0AA : 0xC08A)
#define LOW_SPEED_PORT(x) ((x) ? 0x0800 : 0x0400)
#define HOST_MODE 0x0200
#define PORT_RES_EN(x) ((x) ? 0x0100 : 0x0080)
#define SOF_EOP_EN(x) ((x) ? 0x0002 : 0x0001)
/* USB status register - Notice it has different content in hcd/udc mode */
#define USB_STAT_REG(x) ((x) ? 0xC0B0 : 0xC090)
#define EP0_IRQ_FLG 0x0001
#define EP1_IRQ_FLG 0x0002
#define EP2_IRQ_FLG 0x0004
#define EP3_IRQ_FLG 0x0008
#define EP4_IRQ_FLG 0x0010
#define EP5_IRQ_FLG 0x0020
#define EP6_IRQ_FLG 0x0040
#define EP7_IRQ_FLG 0x0080
#define RESET_IRQ_FLG 0x0100
#define SOF_EOP_IRQ_FLG 0x0200
#define ID_IRQ_FLG 0x4000
#define VBUS_IRQ_FLG 0x8000
/* USB Host only registers */
/* ======================= */
/* Host n Control Register */
#define HOST_CTL_REG(x) ((x) ? 0xC0A0 : 0xC080)
#define PREAMBLE_EN 0x0080 /* Preamble enable */
#define SEQ_SEL 0x0040 /* Data Toggle Sequence Bit Select */
#define ISO_EN 0x0010 /* Isochronous enable */
#define ARM_EN 0x0001 /* Arm operation */
/* Host n Interrupt Enable Register */
#define HOST_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
#define SOF_EOP_IRQ_EN 0x0200 /* SOF/EOP Interrupt Enable */
#define SOF_EOP_TMOUT_IRQ_EN 0x0800 /* SOF/EOP Timeout Interrupt Enable */
#define ID_IRQ_EN 0x4000 /* ID interrupt enable */
#define VBUS_IRQ_EN 0x8000 /* VBUS interrupt enable */
#define DONE_IRQ_EN 0x0001 /* Done Interrupt Enable */
/* USB status register */
#define HOST_STAT_MASK 0x02FD
#define PORT_CONNECT_CHANGE(x) ((x) ? 0x0020 : 0x0010)
#define PORT_SE0_STATUS(x) ((x) ? 0x0008 : 0x0004)
/* Host Frame Register */
#define HOST_FRAME_REG(x) ((x) ? 0xC0B6 : 0xC096)
#define HOST_FRAME_MASK 0x07FF
/* USB Peripheral only registers */
/* ============================= */
/* Device n Port Sel reg */
#define DEVICE_N_PORT_SEL(x) ((x) ? 0xC0A4 : 0xC084)
/* Device n Interrupt Enable Register */
#define DEVICE_N_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
#define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep) ((dev) \
? (0x0280 + (ep << 4)) \
: (0x0200 + (ep << 4)))
#define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep) ((dev) \
? (0x0286 + (ep << 4)) \
: (0x0206 + (ep << 4)))
#define DEVICE_N_ADDRESS(dev) ((dev) ? (0xC0AE) : (0xC08E))
/* HPI registers */
/* ============= */
/* HPI Status register */
#define SOFEOP_FLG(x) (1 << ((x) ? 12 : 10))
#define SIEMSG_FLG(x) (1 << (4 + (x)))
#define RESET_FLG(x) ((x) ? 0x0200 : 0x0002)
#define DONE_FLG(x) (1 << (2 + (x)))
#define RESUME_FLG(x) (1 << (6 + (x)))
#define MBX_OUT_FLG 0x0001 /* Message out available */
#define MBX_IN_FLG 0x0100
#define ID_FLG 0x4000
#define VBUS_FLG 0x8000
/* Interrupt routing register */
#define HPI_IRQ_ROUTING_REG 0x0142
#define HPI_SWAP_ENABLE(x) ((x) ? 0x0100 : 0x0001)
#define RESET_TO_HPI_ENABLE(x) ((x) ? 0x0200 : 0x0002)
#define DONE_TO_HPI_ENABLE(x) ((x) ? 0x0008 : 0x0004)
#define RESUME_TO_HPI_ENABLE(x) ((x) ? 0x0080 : 0x0040)
#define SOFEOP_TO_HPI_EN(x) ((x) ? 0x2000 : 0x0800)
#define SOFEOP_TO_CPU_EN(x) ((x) ? 0x1000 : 0x0400)
#define ID_TO_HPI_ENABLE 0x4000
#define VBUS_TO_HPI_ENABLE 0x8000
/* SIE msg registers */
#define SIEMSG_REG(x) ((x) ? 0x0148 : 0x0144)
#define HUSB_TDListDone 0x1000
#define SUSB_EP0_MSG 0x0001
#define SUSB_EP1_MSG 0x0002
#define SUSB_EP2_MSG 0x0004
#define SUSB_EP3_MSG 0x0008
#define SUSB_EP4_MSG 0x0010
#define SUSB_EP5_MSG 0x0020
#define SUSB_EP6_MSG 0x0040
#define SUSB_EP7_MSG 0x0080
#define SUSB_RST_MSG 0x0100
#define SUSB_SOF_MSG 0x0200
#define SUSB_CFG_MSG 0x0400
#define SUSB_SUS_MSG 0x0800
#define SUSB_ID_MSG 0x4000
#define SUSB_VBUS_MSG 0x8000
/* BIOS interrupt routines */
#define SUSBx_RECEIVE_INT(x) ((x) ? 97 : 81)
#define SUSBx_SEND_INT(x) ((x) ? 96 : 80)
#define SUSBx_DEV_DESC_VEC(x) ((x) ? 0x00D4 : 0x00B4)
#define SUSBx_CONF_DESC_VEC(x) ((x) ? 0x00D6 : 0x00B6)
#define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)
#define CY_HCD_BUF_ADDR 0x500 /* Base address for host */
#define SIE_TD_SIZE 0x200 /* size of the td list */
#define SIE_TD_BUF_SIZE 0x400 /* size of the data buffer */
#define SIE_TD_OFFSET(host) ((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
#define SIE_BUF_OFFSET(host) (SIE_TD_OFFSET(host) + SIE_TD_SIZE)
/* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
#define CY_UDC_REQ_HEADER_BASE 0x1100
/* 8- byte request headers for IN/OUT transfers */
#define CY_UDC_REQ_HEADER_SIZE 8
#define CY_UDC_REQ_HEADER_ADDR(ep_num) (CY_UDC_REQ_HEADER_BASE + \
((ep_num) * CY_UDC_REQ_HEADER_SIZE))
#define CY_UDC_DESC_BASE_ADDRESS (CY_UDC_REQ_HEADER_ADDR(8))
#define CY_UDC_BIOS_REPLACE_BASE 0x1800
#define CY_UDC_REQ_BUFFER_BASE 0x2000
#define CY_UDC_REQ_BUFFER_SIZE 0x0400
#define CY_UDC_REQ_BUFFER_ADDR(ep_num) (CY_UDC_REQ_BUFFER_BASE + \
((ep_num) * CY_UDC_REQ_BUFFER_SIZE))
/* ---------------------------------------------------------------------
* Driver data structures
*/
struct c67x00_device;
/**
* struct c67x00_sie - Common data associated with a SIE
* @lock: lock to protect this struct and the associated chip registers
* @private_data: subdriver dependent data
* @irq: subdriver dependent irq handler, set NULL when not used
* @dev: link to common driver structure
* @sie_num: SIE number on chip, starting from 0
* @mode: SIE mode (host/peripheral/otg/not used)
*/
struct c67x00_sie {
/* Entries to be used by the subdrivers */
spinlock_t lock; /* protect this structure */
void *private_data;
void (*irq) (struct c67x00_sie *sie, u16 int_status, u16 msg);
/* Read only: */
struct c67x00_device *dev;
int sie_num;
int mode;
};
#define sie_dev(s) (&(s)->dev->pdev->dev)
/**
* struct c67x00_lcp
*/
struct c67x00_lcp {
/* Internal use only */
struct mutex mutex;
struct completion msg_received;
u16 last_msg;
};
/*
* struct c67x00_hpi
*/
struct c67x00_hpi {
void __iomem *base;
int regstep;
spinlock_t lock;
struct c67x00_lcp lcp;
};
#define C67X00_SIES 2
#define C67X00_PORTS 2
/**
* struct c67x00_device - Common data associated with a c67x00 instance
* @hpi: hpi addresses
* @sie: array of sie's on this chip
* @pdev: platform device of instance
* @pdata: configuration provided by the platform
*/
struct c67x00_device {
struct c67x00_hpi hpi;
struct c67x00_sie sie[C67X00_SIES];
struct platform_device *pdev;
struct c67x00_platform_data *pdata;
};
/* ---------------------------------------------------------------------
* Low level interface functions
*/
/* Host Port Interface (HPI) functions */
u16 c67x00_ll_hpi_status(struct c67x00_device *dev);
void c67x00_ll_hpi_reg_init(struct c67x00_device *dev);
void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie);
void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie);
/* General functions */
u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num);
u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie);
void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits);
u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie);
void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
void *data, int len);
void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
void *data, int len);
/* Host specific functions */
void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value);
void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port);
void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr);
u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie);
u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie);
void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie);
void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port);
/* Called by c67x00_irq to handle lcp interrupts */
void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status);
/* Setup and teardown */
void c67x00_ll_init(struct c67x00_device *dev);
void c67x00_ll_release(struct c67x00_device *dev);
int c67x00_ll_reset(struct c67x00_device *dev);
#endif /* _USB_C67X00_H */
Reference in a new issue View git blame Copy permalink