Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/rapidio/switches/tsi57x.c
Alexandre Bounine a93192a5d2 rapidio: use common destid storage for endpoints and switches 
Change code to use one storage location common for switches and endpoints.
This eliminates unnecessary device type checks during basic access
operations.  Logic that assigns destid to RIO devices stays unchanged - as
before, switches use an associated destid because they do not have their
own.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:17 -08:00

312 lines
8.7 KiB
C
Raw Blame History

/*
* RapidIO Tsi57x switch family support
*
* Copyright 2009-2010 Integrated Device Technology, Inc.
* Alexandre Bounine <alexandre.bounine@idt.com>
* - Added EM support
* - Modified switch operations initialization.
*
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/rio.h>
#include <linux/rio_drv.h>
#include <linux/rio_ids.h>
#include <linux/delay.h>
#include "../rio.h"
/* Global (broadcast) route registers */
#define SPBC_ROUTE_CFG_DESTID 0x10070
#define SPBC_ROUTE_CFG_PORT 0x10074
/* Per port route registers */
#define SPP_ROUTE_CFG_DESTID(n) (0x11070 + 0x100*n)
#define SPP_ROUTE_CFG_PORT(n) (0x11074 + 0x100*n)
#define TSI578_SP_MODE(n) (0x11004 + n*0x100)
#define TSI578_SP_MODE_GLBL 0x10004
#define TSI578_SP_MODE_PW_DIS 0x08000000
#define TSI578_SP_MODE_LUT_512 0x01000000
#define TSI578_SP_CTL_INDEP(n) (0x13004 + n*0x100)
#define TSI578_SP_LUT_PEINF(n) (0x13010 + n*0x100)
#define TSI578_SP_CS_TX(n) (0x13014 + n*0x100)
#define TSI578_SP_INT_STATUS(n) (0x13018 + n*0x100)
#define TSI578_GLBL_ROUTE_BASE 0x10078
static int
tsi57x_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 route_port)
{
if (table == RIO_GLOBAL_TABLE) {
rio_mport_write_config_32(mport, destid, hopcount,
SPBC_ROUTE_CFG_DESTID, route_destid);
rio_mport_write_config_32(mport, destid, hopcount,
SPBC_ROUTE_CFG_PORT, route_port);
} else {
rio_mport_write_config_32(mport, destid, hopcount,
SPP_ROUTE_CFG_DESTID(table), route_destid);
rio_mport_write_config_32(mport, destid, hopcount,
SPP_ROUTE_CFG_PORT(table), route_port);
}
udelay(10);
return 0;
}
static int
tsi57x_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 *route_port)
{
int ret = 0;
u32 result;
if (table == RIO_GLOBAL_TABLE) {
/* Use local RT of the ingress port to avoid possible
race condition */
rio_mport_read_config_32(mport, destid, hopcount,
RIO_SWP_INFO_CAR, &result);
table = (result & RIO_SWP_INFO_PORT_NUM_MASK);
}
rio_mport_write_config_32(mport, destid, hopcount,
SPP_ROUTE_CFG_DESTID(table), route_destid);
rio_mport_read_config_32(mport, destid, hopcount,
SPP_ROUTE_CFG_PORT(table), &result);
*route_port = (u8)result;
if (*route_port > 15)
ret = -1;
return ret;
}
static int
tsi57x_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table)
{
u32 route_idx;
u32 lut_size;
lut_size = (mport->sys_size) ? 0x1ff : 0xff;
if (table == RIO_GLOBAL_TABLE) {
rio_mport_write_config_32(mport, destid, hopcount,
SPBC_ROUTE_CFG_DESTID, 0x80000000);
for (route_idx = 0; route_idx <= lut_size; route_idx++)
rio_mport_write_config_32(mport, destid, hopcount,
SPBC_ROUTE_CFG_PORT,
RIO_INVALID_ROUTE);
} else {
rio_mport_write_config_32(mport, destid, hopcount,
SPP_ROUTE_CFG_DESTID(table), 0x80000000);
for (route_idx = 0; route_idx <= lut_size; route_idx++)
rio_mport_write_config_32(mport, destid, hopcount,
SPP_ROUTE_CFG_PORT(table) , RIO_INVALID_ROUTE);
}
return 0;
}
static int
tsi57x_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
u8 sw_domain)
{
u32 regval;
/*
* Switch domain configuration operates only at global level
*/
/* Turn off flat (LUT_512) mode */
rio_mport_read_config_32(mport, destid, hopcount,
TSI578_SP_MODE_GLBL, &regval);
rio_mport_write_config_32(mport, destid, hopcount, TSI578_SP_MODE_GLBL,
regval & ~TSI578_SP_MODE_LUT_512);
/* Set switch domain base */
rio_mport_write_config_32(mport, destid, hopcount,
TSI578_GLBL_ROUTE_BASE,
(u32)(sw_domain << 24));
return 0;
}
static int
tsi57x_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
u8 *sw_domain)
{
u32 regval;
/*
* Switch domain configuration operates only at global level
*/
rio_mport_read_config_32(mport, destid, hopcount,
TSI578_GLBL_ROUTE_BASE, &regval);
*sw_domain = (u8)(regval >> 24);
return 0;
}
static int
tsi57x_em_init(struct rio_dev *rdev)
{
u32 regval;
int portnum;
pr_debug("TSI578 %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
for (portnum = 0;
portnum < RIO_GET_TOTAL_PORTS(rdev->swpinfo); portnum++) {
/* Make sure that Port-Writes are enabled (for all ports) */
rio_read_config_32(rdev,
TSI578_SP_MODE(portnum), &regval);
rio_write_config_32(rdev,
TSI578_SP_MODE(portnum),
regval & ~TSI578_SP_MODE_PW_DIS);
/* Clear all pending interrupts */
rio_read_config_32(rdev,
rdev->phys_efptr +
RIO_PORT_N_ERR_STS_CSR(portnum),
&regval);
rio_write_config_32(rdev,
rdev->phys_efptr +
RIO_PORT_N_ERR_STS_CSR(portnum),
regval & 0x07120214);
rio_read_config_32(rdev,
TSI578_SP_INT_STATUS(portnum), &regval);
rio_write_config_32(rdev,
TSI578_SP_INT_STATUS(portnum),
regval & 0x000700bd);
/* Enable all interrupts to allow ports to send a port-write */
rio_read_config_32(rdev,
TSI578_SP_CTL_INDEP(portnum), &regval);
rio_write_config_32(rdev,
TSI578_SP_CTL_INDEP(portnum),
regval | 0x000b0000);
/* Skip next (odd) port if the current port is in x4 mode */
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
&regval);
if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4)
portnum++;
}
/* set TVAL = ~50us */
rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x9a << 8);
return 0;
}
static int
tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
{
struct rio_mport *mport = rdev->net->hport;
u32 intstat, err_status;
int sendcount, checkcount;
u8 route_port;
u32 regval;
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
&err_status);
if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) &&
(err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
RIO_PORT_N_ERR_STS_PW_INP_ES))) {
/* Remove any queued packets by locking/unlocking port */
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
&regval);
if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) {
rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
regval | RIO_PORT_N_CTL_LOCKOUT);
udelay(50);
rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
regval);
}
/* Read from link maintenance response register to clear
* valid bit
*/
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum),
&regval);
/* Send a Packet-Not-Accepted/Link-Request-Input-Status control
* symbol to recover from IES/OES
*/
sendcount = 3;
while (sendcount) {
rio_write_config_32(rdev,
TSI578_SP_CS_TX(portnum), 0x40fc8000);
checkcount = 3;
while (checkcount--) {
udelay(50);
rio_read_config_32(rdev,
rdev->phys_efptr +
RIO_PORT_N_MNT_RSP_CSR(portnum),
&regval);
if (regval & RIO_PORT_N_MNT_RSP_RVAL)
goto exit_es;
}
sendcount--;
}
}
exit_es:
/* Clear implementation specific error status bits */
rio_read_config_32(rdev, TSI578_SP_INT_STATUS(portnum), &intstat);
pr_debug("TSI578[%x:%x] SP%d_INT_STATUS=0x%08x\n",
rdev->destid, rdev->hopcount, portnum, intstat);
if (intstat & 0x10000) {
rio_read_config_32(rdev,
TSI578_SP_LUT_PEINF(portnum), &regval);
regval = (mport->sys_size) ? (regval >> 16) : (regval >> 24);
route_port = rdev->rswitch->route_table[regval];
pr_debug("RIO: TSI578[%s] P%d LUT Parity Error (destID=%d)\n",
rio_name(rdev), portnum, regval);
tsi57x_route_add_entry(mport, rdev->destid, rdev->hopcount,
RIO_GLOBAL_TABLE, regval, route_port);
}
rio_write_config_32(rdev, TSI578_SP_INT_STATUS(portnum),
intstat & 0x000700bd);
return 0;
}
static int tsi57x_switch_init(struct rio_dev *rdev, int do_enum)
{
pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
rdev->rswitch->add_entry = tsi57x_route_add_entry;
rdev->rswitch->get_entry = tsi57x_route_get_entry;
rdev->rswitch->clr_table = tsi57x_route_clr_table;
rdev->rswitch->set_domain = tsi57x_set_domain;
rdev->rswitch->get_domain = tsi57x_get_domain;
rdev->rswitch->em_init = tsi57x_em_init;
rdev->rswitch->em_handle = tsi57x_em_handler;
return 0;
}
DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_switch_init);
DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_switch_init);
DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_switch_init);
DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_switch_init);
Reference in a new issue View git blame Copy permalink