kernel-fxtec-pro1x/drivers/ide/pci/sgiioc4.c
Brent Casavant f5befceb5c [PATCH] SGI IOC4: Detect IO card variant
There are three different IO cards which an SGI IOC4 controller may find
itself on.  One of these variants does not bring out the IDE and serial
signals, so we need to disable attaching the corresponding IOC4 subdrivers
to such cards.

Cleans up message clutter emitted during device probing.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:07 -07:00

760 lines
19 KiB
C

/*
* Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* For further information regarding this notice, see:
*
* http://oss.sgi.com/projects/GenInfo/NoticeExplan
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/ioc4.h>
#include <asm/io.h>
#include <linux/ide.h>
/* IOC4 Specific Definitions */
#define IOC4_CMD_OFFSET 0x100
#define IOC4_CTRL_OFFSET 0x120
#define IOC4_DMA_OFFSET 0x140
#define IOC4_INTR_OFFSET 0x0
#define IOC4_TIMING 0x00
#define IOC4_DMA_PTR_L 0x01
#define IOC4_DMA_PTR_H 0x02
#define IOC4_DMA_ADDR_L 0x03
#define IOC4_DMA_ADDR_H 0x04
#define IOC4_BC_DEV 0x05
#define IOC4_BC_MEM 0x06
#define IOC4_DMA_CTRL 0x07
#define IOC4_DMA_END_ADDR 0x08
/* Bits in the IOC4 Control/Status Register */
#define IOC4_S_DMA_START 0x01
#define IOC4_S_DMA_STOP 0x02
#define IOC4_S_DMA_DIR 0x04
#define IOC4_S_DMA_ACTIVE 0x08
#define IOC4_S_DMA_ERROR 0x10
#define IOC4_ATA_MEMERR 0x02
/* Read/Write Directions */
#define IOC4_DMA_WRITE 0x04
#define IOC4_DMA_READ 0x00
/* Interrupt Register Offsets */
#define IOC4_INTR_REG 0x03
#define IOC4_INTR_SET 0x05
#define IOC4_INTR_CLEAR 0x07
#define IOC4_IDE_CACHELINE_SIZE 128
#define IOC4_CMD_CTL_BLK_SIZE 0x20
#define IOC4_SUPPORTED_FIRMWARE_REV 46
typedef struct {
u32 timing_reg0;
u32 timing_reg1;
u32 low_mem_ptr;
u32 high_mem_ptr;
u32 low_mem_addr;
u32 high_mem_addr;
u32 dev_byte_count;
u32 mem_byte_count;
u32 status;
} ioc4_dma_regs_t;
/* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
/* IOC4 has only 1 IDE channel */
#define IOC4_PRD_BYTES 16
#define IOC4_PRD_ENTRIES (PAGE_SIZE /(4*IOC4_PRD_BYTES))
static void
sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
unsigned long ctrl_port, unsigned long irq_port)
{
unsigned long reg = data_port;
int i;
/* Registers are word (32 bit) aligned */
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
hw->io_ports[i] = reg + i * 4;
if (ctrl_port)
hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
if (irq_port)
hw->io_ports[IDE_IRQ_OFFSET] = irq_port;
}
static void
sgiioc4_maskproc(ide_drive_t * drive, int mask)
{
ide_hwif_t *hwif = HWIF(drive);
hwif->OUTB(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
IDE_CONTROL_REG);
}
static int
sgiioc4_checkirq(ide_hwif_t * hwif)
{
u8 intr_reg =
hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET] + IOC4_INTR_REG * 4);
if (intr_reg & 0x03)
return 1;
return 0;
}
static int
sgiioc4_clearirq(ide_drive_t * drive)
{
u32 intr_reg;
ide_hwif_t *hwif = HWIF(drive);
unsigned long other_ir =
hwif->io_ports[IDE_IRQ_OFFSET] + (IOC4_INTR_REG << 2);
/* Code to check for PCI error conditions */
intr_reg = hwif->INL(other_ir);
if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
/*
* Using hwif->INB to read the IDE_STATUS_REG has a side effect
* of clearing the interrupt. The first read should clear it
* if it is set. The second read should return a "clear" status
* if it got cleared. If not, then spin for a bit trying to
* clear it.
*/
u8 stat = hwif->INB(IDE_STATUS_REG);
int count = 0;
stat = hwif->INB(IDE_STATUS_REG);
while ((stat & 0x80) && (count++ < 100)) {
udelay(1);
stat = hwif->INB(IDE_STATUS_REG);
}
if (intr_reg & 0x02) {
/* Error when transferring DMA data on PCI bus */
u32 pci_err_addr_low, pci_err_addr_high,
pci_stat_cmd_reg;
pci_err_addr_low =
hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET]);
pci_err_addr_high =
hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET] + 4);
pci_read_config_dword(hwif->pci_dev, PCI_COMMAND,
&pci_stat_cmd_reg);
printk(KERN_ERR
"%s(%s) : PCI Bus Error when doing DMA:"
" status-cmd reg is 0x%x\n",
__FUNCTION__, drive->name, pci_stat_cmd_reg);
printk(KERN_ERR
"%s(%s) : PCI Error Address is 0x%x%x\n",
__FUNCTION__, drive->name,
pci_err_addr_high, pci_err_addr_low);
/* Clear the PCI Error indicator */
pci_write_config_dword(hwif->pci_dev, PCI_COMMAND,
0x00000146);
}
/* Clear the Interrupt, Error bits on the IOC4 */
hwif->OUTL(0x03, other_ir);
intr_reg = hwif->INL(other_ir);
}
return intr_reg & 3;
}
static void sgiioc4_ide_dma_start(ide_drive_t * drive)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned int reg = hwif->INL(hwif->dma_base + IOC4_DMA_CTRL * 4);
unsigned int temp_reg = reg | IOC4_S_DMA_START;
hwif->OUTL(temp_reg, hwif->dma_base + IOC4_DMA_CTRL * 4);
}
static u32
sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
{
u32 ioc4_dma;
int count;
count = 0;
ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4);
while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
udelay(1);
ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4);
}
return ioc4_dma;
}
/* Stops the IOC4 DMA Engine */
static int
sgiioc4_ide_dma_end(ide_drive_t * drive)
{
u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
ide_hwif_t *hwif = HWIF(drive);
u64 dma_base = hwif->dma_base;
int dma_stat = 0;
unsigned long *ending_dma = (unsigned long *) hwif->dma_base2;
hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4);
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
if (ioc4_dma & IOC4_S_DMA_STOP) {
printk(KERN_ERR
"%s(%s): IOC4 DMA STOP bit is still 1 :"
"ioc4_dma_reg 0x%x\n",
__FUNCTION__, drive->name, ioc4_dma);
dma_stat = 1;
}
/*
* The IOC4 will DMA 1's to the ending dma area to indicate that
* previous data DMA is complete. This is necessary because of relaxed
* ordering between register reads and DMA writes on the Altix.
*/
while ((cnt++ < 200) && (!valid)) {
for (num = 0; num < 16; num++) {
if (ending_dma[num]) {
valid = 1;
break;
}
}
udelay(1);
}
if (!valid) {
printk(KERN_ERR "%s(%s) : DMA incomplete\n", __FUNCTION__,
drive->name);
dma_stat = 1;
}
bc_dev = hwif->INL(dma_base + IOC4_BC_DEV * 4);
bc_mem = hwif->INL(dma_base + IOC4_BC_MEM * 4);
if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
if (bc_dev > bc_mem + 8) {
printk(KERN_ERR
"%s(%s): WARNING!! byte_count_dev %d "
"!= byte_count_mem %d\n",
__FUNCTION__, drive->name, bc_dev, bc_mem);
}
}
drive->waiting_for_dma = 0;
ide_destroy_dmatable(drive);
return dma_stat;
}
static int
sgiioc4_ide_dma_check(ide_drive_t * drive)
{
if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0) {
printk(KERN_INFO
"Couldnot set %s in Multimode-2 DMA mode | "
"Drive %s using PIO instead\n",
drive->name, drive->name);
drive->using_dma = 0;
} else
drive->using_dma = 1;
return 0;
}
static int
sgiioc4_ide_dma_on(ide_drive_t * drive)
{
drive->using_dma = 1;
return HWIF(drive)->ide_dma_host_on(drive);
}
static int
sgiioc4_ide_dma_off_quietly(ide_drive_t * drive)
{
drive->using_dma = 0;
return HWIF(drive)->ide_dma_host_off(drive);
}
/* returns 1 if dma irq issued, 0 otherwise */
static int
sgiioc4_ide_dma_test_irq(ide_drive_t * drive)
{
return sgiioc4_checkirq(HWIF(drive));
}
static int
sgiioc4_ide_dma_host_on(ide_drive_t * drive)
{
if (drive->using_dma)
return 0;
return 1;
}
static int
sgiioc4_ide_dma_host_off(ide_drive_t * drive)
{
sgiioc4_clearirq(drive);
return 0;
}
static int
sgiioc4_ide_dma_lostirq(ide_drive_t * drive)
{
HWIF(drive)->resetproc(drive);
return __ide_dma_lostirq(drive);
}
static void
sgiioc4_resetproc(ide_drive_t * drive)
{
sgiioc4_ide_dma_end(drive);
sgiioc4_clearirq(drive);
}
static u8
sgiioc4_INB(unsigned long port)
{
u8 reg = (u8) readb((void __iomem *) port);
if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */
if (reg & 0x51) { /* Not busy...check for interrupt */
unsigned long other_ir = port - 0x110;
unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
/* Clear the Interrupt, Error bits on the IOC4 */
if (intr_reg & 0x03) {
writel(0x03, (void __iomem *) other_ir);
intr_reg = (u32) readl((void __iomem *) other_ir);
}
}
}
return reg;
}
/* Creates a dma map for the scatter-gather list entries */
static void __devinit
ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
{
int num_ports = sizeof (ioc4_dma_regs_t);
printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
dma_base, dma_base + num_ports - 1);
if (!request_region(dma_base, num_ports, hwif->name)) {
printk(KERN_ERR
"%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
"ALREADY in use\n",
__FUNCTION__, hwif->name, (void *) dma_base,
(void *) dma_base + num_ports - 1);
goto dma_alloc_failure;
}
hwif->dma_base = dma_base;
hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
&hwif->dmatable_dma);
if (!hwif->dmatable_cpu)
goto dma_alloc_failure;
hwif->sg_max_nents = IOC4_PRD_ENTRIES;
hwif->dma_base2 = (unsigned long)
pci_alloc_consistent(hwif->pci_dev,
IOC4_IDE_CACHELINE_SIZE,
(dma_addr_t *) &(hwif->dma_status));
if (!hwif->dma_base2)
goto dma_base2alloc_failure;
return;
dma_base2alloc_failure:
pci_free_consistent(hwif->pci_dev,
IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
hwif->dmatable_cpu, hwif->dmatable_dma);
printk(KERN_INFO
"%s() -- Error! Unable to allocate DMA Maps for drive %s\n",
__FUNCTION__, hwif->name);
printk(KERN_INFO
"Changing from DMA to PIO mode for Drive %s\n", hwif->name);
dma_alloc_failure:
/* Disable DMA because we couldnot allocate any DMA maps */
hwif->autodma = 0;
hwif->atapi_dma = 0;
}
/* Initializes the IOC4 DMA Engine */
static void
sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
{
u32 ioc4_dma;
ide_hwif_t *hwif = HWIF(drive);
u64 dma_base = hwif->dma_base;
u32 dma_addr, ending_dma_addr;
ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4);
if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
printk(KERN_WARNING
"%s(%s):Warning!! DMA from previous transfer was still active\n",
__FUNCTION__, drive->name);
hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4);
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
if (ioc4_dma & IOC4_S_DMA_STOP)
printk(KERN_ERR
"%s(%s) : IOC4 Dma STOP bit is still 1\n",
__FUNCTION__, drive->name);
}
ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4);
if (ioc4_dma & IOC4_S_DMA_ERROR) {
printk(KERN_WARNING
"%s(%s) : Warning!! - DMA Error during Previous"
" transfer | status 0x%x\n",
__FUNCTION__, drive->name, ioc4_dma);
hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4);
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
if (ioc4_dma & IOC4_S_DMA_STOP)
printk(KERN_ERR
"%s(%s) : IOC4 DMA STOP bit is still 1\n",
__FUNCTION__, drive->name);
}
/* Address of the Scatter Gather List */
dma_addr = cpu_to_le32(hwif->dmatable_dma);
hwif->OUTL(dma_addr, dma_base + IOC4_DMA_PTR_L * 4);
/* Address of the Ending DMA */
memset((unsigned int *) hwif->dma_base2, 0, IOC4_IDE_CACHELINE_SIZE);
ending_dma_addr = cpu_to_le32(hwif->dma_status);
hwif->OUTL(ending_dma_addr, dma_base + IOC4_DMA_END_ADDR * 4);
hwif->OUTL(dma_direction, dma_base + IOC4_DMA_CTRL * 4);
drive->waiting_for_dma = 1;
}
/* IOC4 Scatter Gather list Format */
/* 128 Bit entries to support 64 bit addresses in the future */
/* The Scatter Gather list Entry should be in the BIG-ENDIAN Format */
/* --------------------------------------------------------------------- */
/* | Upper 32 bits - Zero | Lower 32 bits- address | */
/* --------------------------------------------------------------------- */
/* | Upper 32 bits - Zero |EOL| 15 unused | 16 Bit Length| */
/* --------------------------------------------------------------------- */
/* Creates the scatter gather list, DMA Table */
static unsigned int
sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned int *table = hwif->dmatable_cpu;
unsigned int count = 0, i = 1;
struct scatterlist *sg;
hwif->sg_nents = i = ide_build_sglist(drive, rq);
if (!i)
return 0; /* sglist of length Zero */
sg = hwif->sg_table;
while (i && sg_dma_len(sg)) {
dma_addr_t cur_addr;
int cur_len;
cur_addr = sg_dma_address(sg);
cur_len = sg_dma_len(sg);
while (cur_len) {
if (count++ >= IOC4_PRD_ENTRIES) {
printk(KERN_WARNING
"%s: DMA table too small\n",
drive->name);
goto use_pio_instead;
} else {
u32 bcount =
0x10000 - (cur_addr & 0xffff);
if (bcount > cur_len)
bcount = cur_len;
/* put the addr, length in
* the IOC4 dma-table format */
*table = 0x0;
table++;
*table = cpu_to_be32(cur_addr);
table++;
*table = 0x0;
table++;
*table = cpu_to_be32(bcount);
table++;
cur_addr += bcount;
cur_len -= bcount;
}
}
sg++;
i--;
}
if (count) {
table--;
*table |= cpu_to_be32(0x80000000);
return count;
}
use_pio_instead:
pci_unmap_sg(hwif->pci_dev, hwif->sg_table, hwif->sg_nents,
hwif->sg_dma_direction);
return 0; /* revert to PIO for this request */
}
static int sgiioc4_ide_dma_setup(ide_drive_t *drive)
{
struct request *rq = HWGROUP(drive)->rq;
unsigned int count = 0;
int ddir;
if (rq_data_dir(rq))
ddir = PCI_DMA_TODEVICE;
else
ddir = PCI_DMA_FROMDEVICE;
if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) {
/* try PIO instead of DMA */
ide_map_sg(drive, rq);
return 1;
}
if (rq_data_dir(rq))
/* Writes TO the IOC4 FROM Main Memory */
ddir = IOC4_DMA_READ;
else
/* Writes FROM the IOC4 TO Main Memory */
ddir = IOC4_DMA_WRITE;
sgiioc4_configure_for_dma(ddir, drive);
return 0;
}
static void __devinit
ide_init_sgiioc4(ide_hwif_t * hwif)
{
hwif->mmio = 2;
hwif->autodma = 1;
hwif->atapi_dma = 1;
hwif->ultra_mask = 0x0; /* Disable Ultra DMA */
hwif->mwdma_mask = 0x2; /* Multimode-2 DMA */
hwif->swdma_mask = 0x2;
hwif->tuneproc = NULL; /* Sets timing for PIO mode */
hwif->speedproc = NULL; /* Sets timing for DMA &/or PIO modes */
hwif->selectproc = NULL;/* Use the default routine to select drive */
hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */
hwif->pre_reset = NULL; /* No HBA specific pre_set needed */
hwif->resetproc = &sgiioc4_resetproc;/* Reset DMA engine,
clear interrupts */
hwif->intrproc = NULL; /* Enable or Disable interrupt from drive */
hwif->maskproc = &sgiioc4_maskproc; /* Mask on/off NIEN register */
hwif->quirkproc = NULL;
hwif->busproc = NULL;
hwif->dma_setup = &sgiioc4_ide_dma_setup;
hwif->dma_start = &sgiioc4_ide_dma_start;
hwif->ide_dma_end = &sgiioc4_ide_dma_end;
hwif->ide_dma_check = &sgiioc4_ide_dma_check;
hwif->ide_dma_on = &sgiioc4_ide_dma_on;
hwif->ide_dma_off_quietly = &sgiioc4_ide_dma_off_quietly;
hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq;
hwif->ide_dma_host_on = &sgiioc4_ide_dma_host_on;
hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off;
hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
hwif->ide_dma_timeout = &__ide_dma_timeout;
/*
* The IOC4 uses MMIO rather than Port IO.
* It also needs special workarounds for INB.
*/
default_hwif_mmiops(hwif);
hwif->INB = &sgiioc4_INB;
}
static int __devinit
sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
{
unsigned long base, ctl, dma_base, irqport;
ide_hwif_t *hwif;
int h;
/*
* Find an empty HWIF; if none available, return -ENOMEM.
*/
for (h = 0; h < MAX_HWIFS; ++h) {
hwif = &ide_hwifs[h];
if (hwif->chipset == ide_unknown)
break;
}
if (h == MAX_HWIFS) {
printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", d->name);
return -ENOMEM;
}
/* Get the CmdBlk and CtrlBlk Base Registers */
base = pci_resource_start(dev, 0) + IOC4_CMD_OFFSET;
ctl = pci_resource_start(dev, 0) + IOC4_CTRL_OFFSET;
irqport = pci_resource_start(dev, 0) + IOC4_INTR_OFFSET;
dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
if (!request_region(base, IOC4_CMD_CTL_BLK_SIZE, hwif->name)) {
printk(KERN_ERR
"%s : %s -- ERROR, Port Addresses "
"0x%p to 0x%p ALREADY in use\n",
__FUNCTION__, hwif->name, (void *) base,
(void *) base + IOC4_CMD_CTL_BLK_SIZE);
return -ENOMEM;
}
if (hwif->io_ports[IDE_DATA_OFFSET] != base) {
/* Initialize the IO registers */
sgiioc4_init_hwif_ports(&hwif->hw, base, ctl, irqport);
memcpy(hwif->io_ports, hwif->hw.io_ports,
sizeof (hwif->io_ports));
hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
}
hwif->irq = dev->irq;
hwif->chipset = ide_pci;
hwif->pci_dev = dev;
hwif->channel = 0; /* Single Channel chip */
hwif->cds = (struct ide_pci_device_s *) d;
hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */
/* Initializing chipset IRQ Registers */
hwif->OUTL(0x03, irqport + IOC4_INTR_SET * 4);
ide_init_sgiioc4(hwif);
if (dma_base)
ide_dma_sgiioc4(hwif, dma_base);
else
printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n",
hwif->name, d->name);
if (probe_hwif_init(hwif))
return -EIO;
/* Create /proc/ide entries */
create_proc_ide_interfaces();
return 0;
}
static unsigned int __devinit
pci_init_sgiioc4(struct pci_dev *dev, ide_pci_device_t * d)
{
unsigned int class_rev;
int ret;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
d->name, pci_name(dev), class_rev);
if (class_rev < IOC4_SUPPORTED_FIRMWARE_REV) {
printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
"firmware is obsolete - please upgrade to revision"
"46 or higher\n", d->name, pci_name(dev));
ret = -EAGAIN;
goto out;
}
ret = sgiioc4_ide_setup_pci_device(dev, d);
out:
return ret;
}
static ide_pci_device_t sgiioc4_chipsets[] __devinitdata = {
{
/* Channel 0 */
.name = "SGIIOC4",
.init_hwif = ide_init_sgiioc4,
.init_dma = ide_dma_sgiioc4,
.channels = 1,
.autodma = AUTODMA,
/* SGI IOC4 doesn't have enablebits. */
.bootable = ON_BOARD,
}
};
int
ioc4_ide_attach_one(struct ioc4_driver_data *idd)
{
/* PCI-RT does not bring out IDE connection.
* Do not attach to this particular IOC4.
*/
if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
return 0;
return pci_init_sgiioc4(idd->idd_pdev,
&sgiioc4_chipsets[idd->idd_pci_id->driver_data]);
}
static struct ioc4_submodule ioc4_ide_submodule = {
.is_name = "IOC4_ide",
.is_owner = THIS_MODULE,
.is_probe = ioc4_ide_attach_one,
/* .is_remove = ioc4_ide_remove_one, */
};
static int __devinit
ioc4_ide_init(void)
{
return ioc4_register_submodule(&ioc4_ide_submodule);
}
static void __devexit
ioc4_ide_exit(void)
{
ioc4_unregister_submodule(&ioc4_ide_submodule);
}
module_init(ioc4_ide_init);
module_exit(ioc4_ide_exit);
MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
MODULE_LICENSE("GPL");