cfe781946d
Adds power management code with fine granularity. Every flash control command is enclosed by runtime_put()/get()s. To make sure that no overhead is generated by too frequent power state switches, a quality of service request is issued. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
171 lines
5.8 KiB
C
171 lines
5.8 KiB
C
/*
|
|
* SuperH FLCTL nand controller
|
|
*
|
|
* Copyright © 2008 Renesas Solutions Corp.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#ifndef __SH_FLCTL_H__
|
|
#define __SH_FLCTL_H__
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/pm_qos.h>
|
|
|
|
/* FLCTL registers */
|
|
#define FLCMNCR(f) (f->reg + 0x0)
|
|
#define FLCMDCR(f) (f->reg + 0x4)
|
|
#define FLCMCDR(f) (f->reg + 0x8)
|
|
#define FLADR(f) (f->reg + 0xC)
|
|
#define FLADR2(f) (f->reg + 0x3C)
|
|
#define FLDATAR(f) (f->reg + 0x10)
|
|
#define FLDTCNTR(f) (f->reg + 0x14)
|
|
#define FLINTDMACR(f) (f->reg + 0x18)
|
|
#define FLBSYTMR(f) (f->reg + 0x1C)
|
|
#define FLBSYCNT(f) (f->reg + 0x20)
|
|
#define FLDTFIFO(f) (f->reg + 0x24)
|
|
#define FLECFIFO(f) (f->reg + 0x28)
|
|
#define FLTRCR(f) (f->reg + 0x2C)
|
|
#define FLHOLDCR(f) (f->reg + 0x38)
|
|
#define FL4ECCRESULT0(f) (f->reg + 0x80)
|
|
#define FL4ECCRESULT1(f) (f->reg + 0x84)
|
|
#define FL4ECCRESULT2(f) (f->reg + 0x88)
|
|
#define FL4ECCRESULT3(f) (f->reg + 0x8C)
|
|
#define FL4ECCCR(f) (f->reg + 0x90)
|
|
#define FL4ECCCNT(f) (f->reg + 0x94)
|
|
#define FLERRADR(f) (f->reg + 0x98)
|
|
|
|
/* FLCMNCR control bits */
|
|
#define ECCPOS2 (0x1 << 25)
|
|
#define _4ECCCNTEN (0x1 << 24)
|
|
#define _4ECCEN (0x1 << 23)
|
|
#define _4ECCCORRECT (0x1 << 22)
|
|
#define SHBUSSEL (0x1 << 20)
|
|
#define SEL_16BIT (0x1 << 19)
|
|
#define SNAND_E (0x1 << 18) /* SNAND (0=512 1=2048)*/
|
|
#define QTSEL_E (0x1 << 17)
|
|
#define ENDIAN (0x1 << 16) /* 1 = little endian */
|
|
#define FCKSEL_E (0x1 << 15)
|
|
#define ECCPOS_00 (0x00 << 12)
|
|
#define ECCPOS_01 (0x01 << 12)
|
|
#define ECCPOS_02 (0x02 << 12)
|
|
#define ACM_SACCES_MODE (0x01 << 10)
|
|
#define NANWF_E (0x1 << 9)
|
|
#define SE_D (0x1 << 8) /* Spare area disable */
|
|
#define CE1_ENABLE (0x1 << 4) /* Chip Enable 1 */
|
|
#define CE0_ENABLE (0x1 << 3) /* Chip Enable 0 */
|
|
#define TYPESEL_SET (0x1 << 0)
|
|
|
|
/*
|
|
* Clock settings using the PULSEx registers from FLCMNCR
|
|
*
|
|
* Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E
|
|
* to control the clock divider used between the High-Speed Peripheral Clock
|
|
* and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
|
|
* and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
|
|
* bit version the divider is seperate for the pulse width of high and low
|
|
* signals.
|
|
*/
|
|
#define PULSE3 (0x1 << 27)
|
|
#define PULSE2 (0x1 << 17)
|
|
#define PULSE1 (0x1 << 15)
|
|
#define PULSE0 (0x1 << 9)
|
|
#define CLK_8B_0_5 PULSE1
|
|
#define CLK_8B_1 0x0
|
|
#define CLK_8B_1_5 (PULSE1 | PULSE2)
|
|
#define CLK_8B_2 PULSE0
|
|
#define CLK_8B_3 (PULSE0 | PULSE1 | PULSE2)
|
|
#define CLK_8B_4 (PULSE0 | PULSE2)
|
|
#define CLK_16B_6L_2H PULSE0
|
|
#define CLK_16B_9L_3H (PULSE0 | PULSE1 | PULSE2)
|
|
#define CLK_16B_12L_4H (PULSE0 | PULSE2)
|
|
|
|
/* FLCMDCR control bits */
|
|
#define ADRCNT2_E (0x1 << 31) /* 5byte address enable */
|
|
#define ADRMD_E (0x1 << 26) /* Sector address access */
|
|
#define CDSRC_E (0x1 << 25) /* Data buffer selection */
|
|
#define DOSR_E (0x1 << 24) /* Status read check */
|
|
#define SELRW (0x1 << 21) /* 0:read 1:write */
|
|
#define DOADR_E (0x1 << 20) /* Address stage execute */
|
|
#define ADRCNT_1 (0x00 << 18) /* Address data bytes: 1byte */
|
|
#define ADRCNT_2 (0x01 << 18) /* Address data bytes: 2byte */
|
|
#define ADRCNT_3 (0x02 << 18) /* Address data bytes: 3byte */
|
|
#define ADRCNT_4 (0x03 << 18) /* Address data bytes: 4byte */
|
|
#define DOCMD2_E (0x1 << 17) /* 2nd cmd stage execute */
|
|
#define DOCMD1_E (0x1 << 16) /* 1st cmd stage execute */
|
|
|
|
/* FLTRCR control bits */
|
|
#define TRSTRT (0x1 << 0) /* translation start */
|
|
#define TREND (0x1 << 1) /* translation end */
|
|
|
|
/*
|
|
* FLHOLDCR control bits
|
|
*
|
|
* HOLDEN: Bus Occupancy Enable (inverted)
|
|
* Enable this bit when the external bus might be used in between transfers.
|
|
* If not set and the bus gets used by other modules, a deadlock occurs.
|
|
*/
|
|
#define HOLDEN (0x1 << 0)
|
|
|
|
/* FL4ECCCR control bits */
|
|
#define _4ECCFA (0x1 << 2) /* 4 symbols correct fault */
|
|
#define _4ECCEND (0x1 << 1) /* 4 symbols end */
|
|
#define _4ECCEXST (0x1 << 0) /* 4 symbols exist */
|
|
|
|
#define INIT_FL4ECCRESULT_VAL 0x03FF03FF
|
|
#define LOOP_TIMEOUT_MAX 0x00010000
|
|
|
|
struct sh_flctl {
|
|
struct mtd_info mtd;
|
|
struct nand_chip chip;
|
|
struct platform_device *pdev;
|
|
struct dev_pm_qos_request pm_qos;
|
|
void __iomem *reg;
|
|
|
|
uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */
|
|
int read_bytes;
|
|
int index;
|
|
int seqin_column; /* column in SEQIN cmd */
|
|
int seqin_page_addr; /* page_addr in SEQIN cmd */
|
|
uint32_t seqin_read_cmd; /* read cmd in SEQIN cmd */
|
|
int erase1_page_addr; /* page_addr in ERASE1 cmd */
|
|
uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */
|
|
uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */
|
|
uint32_t flcmncr_base; /* base value of FLCMNCR */
|
|
|
|
int hwecc_cant_correct[4];
|
|
|
|
unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */
|
|
unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */
|
|
unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */
|
|
unsigned qos_request:1; /* QoS request to prevent deep power shutdown */
|
|
};
|
|
|
|
struct sh_flctl_platform_data {
|
|
struct mtd_partition *parts;
|
|
int nr_parts;
|
|
unsigned long flcmncr_val;
|
|
|
|
unsigned has_hwecc:1;
|
|
unsigned use_holden:1;
|
|
};
|
|
|
|
static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
|
|
{
|
|
return container_of(mtdinfo, struct sh_flctl, mtd);
|
|
}
|
|
|
|
#endif /* __SH_FLCTL_H__ */
|