69f22be7b1
USB2.0 Device Controller (U2DC) which is found in Marvell PXA3xx. U2DC supports both High and Full speed modes. PXA320 and PXA300 U2DC supports only UTMI interface. PXA310 U2DC supports only ULPI interface and has the OTG capability. U2D Controller ULPI driver introduced in this patch supports only the PXA310 USB Host via the ULPI. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
103 lines
3.8 KiB
Makefile
103 lines
3.8 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
# Common support (must be linked before board specific support)
|
|
obj-y += clock.o devices.o generic.o irq.o \
|
|
time.o reset.o
|
|
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
|
|
|
|
ifeq ($(CONFIG_CPU_FREQ),y)
|
|
obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o
|
|
obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o
|
|
obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o
|
|
endif
|
|
|
|
# Generic drivers that other drivers may depend upon
|
|
|
|
# SoC-specific code
|
|
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
|
|
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
|
|
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
|
|
obj-$(CONFIG_CPU_PXA300) += pxa300.o
|
|
obj-$(CONFIG_CPU_PXA320) += pxa320.o
|
|
obj-$(CONFIG_CPU_PXA930) += pxa930.o
|
|
|
|
# NOTE: keep the order of boards in accordance to their order in Kconfig
|
|
|
|
# Intel/Marvell Dev Platforms
|
|
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
|
|
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
|
|
obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o
|
|
obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o
|
|
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
|
|
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
|
|
obj-$(CONFIG_MACH_SAAR) += saar.o
|
|
|
|
# 3rd Party Dev Platforms
|
|
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
|
|
obj-$(CONFIG_ARCH_VIPER) += viper.o
|
|
obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o
|
|
obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
|
|
obj-$(CONFIG_MACH_CSB726) += csb726.o
|
|
obj-$(CONFIG_CSB726_CSB701) += csb701.o
|
|
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
|
|
ifeq ($(CONFIG_PCI),y)
|
|
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
|
|
endif
|
|
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
|
|
obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
|
|
obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o
|
|
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
|
|
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
|
|
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
|
|
obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o
|
|
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
|
|
obj-$(CONFIG_MACH_XCEP) += xcep.o
|
|
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
|
|
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
|
|
obj-$(CONFIG_MACH_PCM027) += pcm027.o
|
|
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
|
|
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
|
|
obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o
|
|
obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o
|
|
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
|
|
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
|
|
obj-$(CONFIG_MACH_VPAC270) += vpac270.o
|
|
|
|
# End-user Products
|
|
obj-$(CONFIG_MACH_H4700) += hx4700.o
|
|
obj-$(CONFIG_MACH_H5000) += h5000.o
|
|
obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
|
|
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
|
|
obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
|
|
obj-$(CONFIG_PXA_EZX) += ezx.o
|
|
obj-$(CONFIG_MACH_MP900C) += mp900.o
|
|
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
|
|
obj-$(CONFIG_MACH_PALMTC) += palmtc.o
|
|
obj-$(CONFIG_MACH_PALM27X) += palm27x.o
|
|
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
|
|
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
|
|
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
|
|
obj-$(CONFIG_MACH_PALMLD) += palmld.o
|
|
obj-$(CONFIG_PALM_TREO) += palmtreo.o
|
|
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
|
|
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
|
|
obj-$(CONFIG_MACH_POODLE) += poodle.o
|
|
obj-$(CONFIG_MACH_TOSA) += tosa.o
|
|
obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o
|
|
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
|
|
obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o
|
|
obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
|
|
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
|
|
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
|
|
|
|
# Support for blinky lights
|
|
led-y := leds.o
|
|
led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
|
|
led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
|
|
led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
|
|
|
|
obj-$(CONFIG_LEDS) += $(led-y)
|
|
|
|
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
|