kernel-fxtec-pro1x/drivers/pci/pcie/portdrv.h
Rafael J. Wysocki c39fae1416 PCI PM: Make it possible to force using INTx for PCIe PME signaling
Apparently, some machines may have problems with PCI run-time power
management if MSIs are used for the native PCIe PME signaling.  In
particular, on the MSI Wind U-100 PCIe PME interrupts are not
generated by a PCIe root port after a resume from suspend to RAM, if
the system wake-up was triggered by a PME from the device attached to
this port.  [It doesn't help to free the interrupt on suspend and
request it back on resume, even if that is done along with disabling
the MSI and re-enabling it, respectively.]  However, if INTx
interrupts are used for this purpose on the same machine, everything
works just fine.

For this reason, add a kernel command line switch allowing one to
request that MSIs be not used for the native PCIe PME signaling,
introduce a DMI table allowing us to blacklist machines that need
this switch to be set by default and put the MSI Wind U-100 into this
table.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:20:39 -08:00

50 lines
1.3 KiB
C

/*
* File: portdrv.h
* Purpose: PCI Express Port Bus Driver's Internal Data Structures
*
* Copyright (C) 2004 Intel
* Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
*/
#ifndef _PORTDRV_H_
#define _PORTDRV_H_
#include <linux/compiler.h>
#define PCIE_PORT_DEVICE_MAXSERVICES 4
/*
* According to the PCI Express Base Specification 2.0, the indices of
* the MSI-X table entires used by port services must not exceed 31
*/
#define PCIE_PORT_MAX_MSIX_ENTRIES 32
#define get_descriptor_id(type, service) (((type - 4) << 4) | service)
extern struct bus_type pcie_port_bus_type;
extern int pcie_port_device_register(struct pci_dev *dev);
#ifdef CONFIG_PM
extern int pcie_port_device_suspend(struct device *dev);
extern int pcie_port_device_resume(struct device *dev);
#endif
extern void pcie_port_device_remove(struct pci_dev *dev);
extern int __must_check pcie_port_bus_register(void);
extern void pcie_port_bus_unregister(void);
#ifdef CONFIG_PCIE_PME
extern bool pcie_pme_msi_disabled;
static inline void pcie_pme_disable_msi(void)
{
pcie_pme_msi_disabled = true;
}
static inline bool pcie_pme_no_msi(void)
{
return pcie_pme_msi_disabled;
}
#else /* !CONFIG_PCIE_PME */
static inline void pcie_pme_disable_msi(void) {}
static inline bool pcie_pme_no_msi(void) { return false; }
#endif /* !CONFIG_PCIE_PME */
#endif /* _PORTDRV_H_ */