a3bee42f05
This patch lets the user enable support for EVKLCD100 and EVKLCD101 (refered to by EVKLCD10X). By enabling EVKLCD10X support the LCD controller and AC97 controller platform devices are added. The user can also choose between the EVKLCD100 (QVGA display) and the EVKLCD101 (VGA display), this is added to automagically select the correct panel timing and resolution parameters. Enabling support for EVKLCD10X addon board will cripple the MCI platform device a bit since they share two GPIO lines (detect and write-protect). These two lines are disabled when EVKLCD10X is enabled. The default configurations are based upon ATNGW100, but with added AC97C and LCDC driver. Virtual terminal is also enabled by default for EVKLCD10X boards. Verified on hardware with a NGW100 + EVKLCD100/101. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
259 lines
4.5 KiB
Text
259 lines
4.5 KiB
Text
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see Documentation/kbuild/kconfig-language.txt.
|
|
#
|
|
|
|
mainmenu "Linux Kernel Configuration"
|
|
|
|
config AVR32
|
|
def_bool y
|
|
# With EMBEDDED=n, we get lots of stuff automatically selected
|
|
# that we usually don't need on AVR32.
|
|
select EMBEDDED
|
|
select HAVE_CLK
|
|
select HAVE_OPROFILE
|
|
select HAVE_KPROBES
|
|
help
|
|
AVR32 is a high-performance 32-bit RISC microprocessor core,
|
|
designed for cost-sensitive embedded applications, with particular
|
|
emphasis on low power consumption and high code density.
|
|
|
|
There is an AVR32 Linux project with a web page at
|
|
http://avr32linux.org/.
|
|
|
|
config GENERIC_GPIO
|
|
def_bool y
|
|
|
|
config GENERIC_HARDIRQS
|
|
def_bool y
|
|
|
|
config STACKTRACE_SUPPORT
|
|
def_bool y
|
|
|
|
config LOCKDEP_SUPPORT
|
|
def_bool y
|
|
|
|
config TRACE_IRQFLAGS_SUPPORT
|
|
def_bool y
|
|
|
|
config HARDIRQS_SW_RESEND
|
|
def_bool y
|
|
|
|
config GENERIC_IRQ_PROBE
|
|
def_bool y
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
def_bool y
|
|
|
|
config GENERIC_TIME
|
|
def_bool y
|
|
|
|
config GENERIC_CLOCKEVENTS
|
|
def_bool y
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
def_bool n
|
|
|
|
config ARCH_HAS_ILOG2_U32
|
|
def_bool n
|
|
|
|
config ARCH_HAS_ILOG2_U64
|
|
def_bool n
|
|
|
|
config GENERIC_HWEIGHT
|
|
def_bool y
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
def_bool y
|
|
|
|
config GENERIC_BUG
|
|
def_bool y
|
|
depends on BUG
|
|
|
|
source "init/Kconfig"
|
|
|
|
menu "System Type and features"
|
|
|
|
source "kernel/time/Kconfig"
|
|
|
|
config SUBARCH_AVR32B
|
|
bool
|
|
config MMU
|
|
bool
|
|
config PERFORMANCE_COUNTERS
|
|
bool
|
|
|
|
config PLATFORM_AT32AP
|
|
bool
|
|
select SUBARCH_AVR32B
|
|
select MMU
|
|
select PERFORMANCE_COUNTERS
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select GENERIC_ALLOCATOR
|
|
|
|
#
|
|
# CPU types
|
|
#
|
|
|
|
# AP7000 derivatives
|
|
config CPU_AT32AP700X
|
|
bool
|
|
select PLATFORM_AT32AP
|
|
config CPU_AT32AP7000
|
|
bool
|
|
select CPU_AT32AP700X
|
|
config CPU_AT32AP7001
|
|
bool
|
|
select CPU_AT32AP700X
|
|
config CPU_AT32AP7002
|
|
bool
|
|
select CPU_AT32AP700X
|
|
|
|
choice
|
|
prompt "AVR32 board type"
|
|
default BOARD_ATSTK1000
|
|
|
|
config BOARD_ATSTK1000
|
|
bool "ATSTK1000 evaluation board"
|
|
|
|
config BOARD_ATNGW100
|
|
bool "ATNGW100 Network Gateway"
|
|
select CPU_AT32AP7000
|
|
endchoice
|
|
|
|
source "arch/avr32/boards/atstk1000/Kconfig"
|
|
source "arch/avr32/boards/atngw100/Kconfig"
|
|
|
|
choice
|
|
prompt "Boot loader type"
|
|
default LOADER_U_BOOT
|
|
|
|
config LOADER_U_BOOT
|
|
bool "U-Boot (or similar) bootloader"
|
|
endchoice
|
|
|
|
source "arch/avr32/mach-at32ap/Kconfig"
|
|
|
|
config LOAD_ADDRESS
|
|
hex
|
|
default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
|
|
|
|
config ENTRY_ADDRESS
|
|
hex
|
|
default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
|
|
|
|
config PHYS_OFFSET
|
|
hex
|
|
default 0x10000000 if CPU_AT32AP700X=y
|
|
|
|
source "kernel/Kconfig.preempt"
|
|
|
|
config QUICKLIST
|
|
def_bool y
|
|
|
|
config HAVE_ARCH_BOOTMEM_NODE
|
|
def_bool n
|
|
|
|
config ARCH_HAVE_MEMORY_PRESENT
|
|
def_bool n
|
|
|
|
config NEED_NODE_MEMMAP_SIZE
|
|
def_bool n
|
|
|
|
config ARCH_FLATMEM_ENABLE
|
|
def_bool y
|
|
|
|
config ARCH_DISCONTIGMEM_ENABLE
|
|
def_bool n
|
|
|
|
config ARCH_SPARSEMEM_ENABLE
|
|
def_bool n
|
|
|
|
source "mm/Kconfig"
|
|
|
|
config OWNERSHIP_TRACE
|
|
bool "Ownership trace support"
|
|
default y
|
|
help
|
|
Say Y to generate an Ownership Trace message on every context switch,
|
|
enabling Nexus-compliant debuggers to keep track of the PID of the
|
|
currently executing task.
|
|
|
|
config NMI_DEBUGGING
|
|
bool "NMI Debugging"
|
|
default n
|
|
help
|
|
Say Y here and pass the nmi_debug command-line parameter to
|
|
the kernel to turn on NMI debugging. Depending on the value
|
|
of the nmi_debug option, various pieces of information will
|
|
be dumped to the console when a Non-Maskable Interrupt
|
|
happens.
|
|
|
|
# FPU emulation goes here
|
|
|
|
source "kernel/Kconfig.hz"
|
|
|
|
config CMDLINE
|
|
string "Default kernel command line"
|
|
default ""
|
|
help
|
|
If you don't have a boot loader capable of passing a command line string
|
|
to the kernel, you may specify one here. As a minimum, you should specify
|
|
the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
|
|
|
|
endmenu
|
|
|
|
menu "Power management options"
|
|
|
|
source "kernel/power/Kconfig"
|
|
|
|
config ARCH_SUSPEND_POSSIBLE
|
|
def_bool y
|
|
|
|
menu "CPU Frequency scaling"
|
|
|
|
source "drivers/cpufreq/Kconfig"
|
|
|
|
config CPU_FREQ_AT32AP
|
|
bool "CPU frequency driver for AT32AP"
|
|
depends on CPU_FREQ && PLATFORM_AT32AP
|
|
default n
|
|
help
|
|
This enables the CPU frequency driver for AT32AP processors.
|
|
|
|
For details, take a look in <file:Documentation/cpu-freq>.
|
|
|
|
If in doubt, say N.
|
|
|
|
endmenu
|
|
|
|
endmenu
|
|
|
|
menu "Bus options"
|
|
|
|
config PCI
|
|
bool
|
|
|
|
source "drivers/pci/Kconfig"
|
|
|
|
source "drivers/pcmcia/Kconfig"
|
|
|
|
endmenu
|
|
|
|
menu "Executable file formats"
|
|
source "fs/Kconfig.binfmt"
|
|
endmenu
|
|
|
|
source "net/Kconfig"
|
|
|
|
source "drivers/Kconfig"
|
|
|
|
source "fs/Kconfig"
|
|
|
|
source "arch/avr32/Kconfig.debug"
|
|
|
|
source "security/Kconfig"
|
|
|
|
source "crypto/Kconfig"
|
|
|
|
source "lib/Kconfig"
|