Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/mmc/core
History
Weijun Yang 4324f6de6d mmc: core: enable CMD19 tuning for DDR50 mode 
As SD Specifications Part1 Physical Layer Specification Version
3.01 says, CMD19 tuning is available for unlocked cards in transfer
state of 1.8V signaling mode. The small difference between v3.00
and 3.01 spec means that CMD19 tuning is also available for DDR50
mode.

Signed-off-by: Weijun Yang <york.yang@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-26 16:00:03 +01:00
..
bus.c Revert "mmc: core: Convert mmc_driver to device_driver" 2015-04-17 11:48:01 +02:00
bus.h
core.c mmc: Wait for card_busy before starting sdio requests 2015-10-26 16:00:01 +01:00
core.h mmc: core: Factor out common code in drive strength selection 2015-06-01 09:07:12 +02:00
debugfs.c mmc: debugfs: implement ios show for SDR12 and SDR25 2015-10-26 16:00:02 +01:00
host.c mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unset 2015-09-29 12:17:03 +02:00
host.h mmc: host: Add facility to support re-tuning 2015-06-01 09:06:53 +02:00
Kconfig mmc: core: Use MMC_UNSAFE_RESUME as default behavior 2014-02-13 22:58:15 -05:00
Makefile mmc: pwrseq: add driver for emmc hardware reset 2015-02-04 09:45:09 +01:00
mmc.c mmc: core: Fix init_card in 52Mhz 2015-10-21 10:18:11 +02:00
mmc_ops.c mmc: core: Convert __mmc_switch() into an internal core function 2015-10-26 15:59:54 +01:00
mmc_ops.h mmc: core: Convert __mmc_switch() into an internal core function 2015-10-26 15:59:54 +01:00
pwrseq.c mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc() 2015-04-17 10:17:19 +02:00
pwrseq.h mmc: pwrseq: simplify alloc/free hooks 2015-03-23 14:13:42 +01:00
pwrseq_emmc.c mmc: pwrseq: use gpiod_get() instead of index 0 2015-10-26 15:59:55 +01:00
pwrseq_simple.c mmc: pwrseq_simple: use GPIO descriptors array API 2015-10-26 15:59:59 +01:00
quirks.c mmc: quirks: Fixup debug message 2014-07-09 11:26:03 +02:00
sd.c mmc: core: enable CMD19 tuning for DDR50 mode 2015-10-26 16:00:03 +01:00
sd.h mmc: drop the speed mode of card's state 2014-05-12 18:05:53 -04:00
sd_ops.c mmc: sd: warn if card stays busy during init 2014-07-09 11:26:07 +02:00
sd_ops.h
sdio.c mmc: core: Keep host claimed while invoking mmc_power_off|up() 2015-10-26 15:59:52 +01:00
sdio_bus.c mmc: core: Attach PM domain prior probing of SDIO func driver 2015-06-04 10:03:51 +02:00
sdio_bus.h
sdio_cis.c mmc: sdio: Change pr_warning to pr_warn_ratelimited 2012-07-22 15:25:48 -04:00
sdio_cis.h
sdio_io.c mmc: sdio: Use multiple scatter/gather list 2012-12-06 13:54:43 -05:00
sdio_irq.c mmc: Convert pr_warning to pr_warn 2014-09-24 10:13:09 +02:00
sdio_ops.c mmc: sdio: Use multiple scatter/gather list 2012-12-06 13:54:43 -05:00
sdio_ops.h mmc: Add mmc_is_io_op helper function 2015-10-26 16:00:01 +01:00
slot-gpio.c mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts 2015-01-19 09:56:29 +01:00
slot-gpio.h mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core 2015-01-19 09:56:17 +01:00