7136f8d88c
Now mach/hardware.h is empty for omap2+ and can be removed except for plat-omap/dmtimer.c for omap1. Also the include of mach/irqs.h can now be removed for shared plat-omap/i2c.c as it's no longer needed. Signed-off-by: Tony Lindgren <tony@atomide.com>
289 lines
6.8 KiB
C
289 lines
6.8 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/board-2430sdp.c
|
|
*
|
|
* Copyright (C) 2006 Texas Instruments
|
|
*
|
|
* Modified from mach-omap2/board-generic.c
|
|
*
|
|
* Initial Code : Based on a patch from Komal Shah and Richard Woodruff
|
|
* Updated the Code for 2430 SDP : Syed Mohammed Khasim
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c/twl.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "common.h"
|
|
#include "gpmc.h"
|
|
#include "gpmc-smc91x.h"
|
|
|
|
#include <video/omapdss.h>
|
|
#include <video/omap-panel-generic-dpi.h>
|
|
|
|
#include "mux.h"
|
|
#include "hsmmc.h"
|
|
#include "common-board-devices.h"
|
|
|
|
#define SDP2430_CS0_BASE 0x04000000
|
|
#define SECONDARY_LCD_GPIO 147
|
|
|
|
static struct mtd_partition sdp2430_partitions[] = {
|
|
/* bootloader (U-Boot, etc) in first sector */
|
|
{
|
|
.name = "bootloader",
|
|
.offset = 0,
|
|
.size = SZ_256K,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
/* bootloader params in the next sector */
|
|
{
|
|
.name = "params",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_128K,
|
|
.mask_flags = 0,
|
|
},
|
|
/* kernel */
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_2M,
|
|
.mask_flags = 0
|
|
},
|
|
/* file system */
|
|
{
|
|
.name = "filesystem",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = 0
|
|
}
|
|
};
|
|
|
|
static struct physmap_flash_data sdp2430_flash_data = {
|
|
.width = 2,
|
|
.parts = sdp2430_partitions,
|
|
.nr_parts = ARRAY_SIZE(sdp2430_partitions),
|
|
};
|
|
|
|
static struct resource sdp2430_flash_resource = {
|
|
.start = SDP2430_CS0_BASE,
|
|
.end = SDP2430_CS0_BASE + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device sdp2430_flash_device = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &sdp2430_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &sdp2430_flash_resource,
|
|
};
|
|
|
|
static struct platform_device *sdp2430_devices[] __initdata = {
|
|
&sdp2430_flash_device,
|
|
};
|
|
|
|
/* LCD */
|
|
#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
|
|
#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
|
|
|
|
static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev)
|
|
{
|
|
gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1);
|
|
gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev)
|
|
{
|
|
gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0);
|
|
gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0);
|
|
}
|
|
|
|
static struct panel_generic_dpi_data sdp2430_panel_data = {
|
|
.name = "nec_nl2432dr22-11b",
|
|
.platform_enable = sdp2430_panel_enable_lcd,
|
|
.platform_disable = sdp2430_panel_disable_lcd,
|
|
};
|
|
|
|
static struct omap_dss_device sdp2430_lcd_device = {
|
|
.name = "lcd",
|
|
.driver_name = "generic_dpi_panel",
|
|
.type = OMAP_DISPLAY_TYPE_DPI,
|
|
.phy.dpi.data_lines = 16,
|
|
.data = &sdp2430_panel_data,
|
|
};
|
|
|
|
static struct omap_dss_device *sdp2430_dss_devices[] = {
|
|
&sdp2430_lcd_device,
|
|
};
|
|
|
|
static struct omap_dss_board_info sdp2430_dss_data = {
|
|
.num_devices = ARRAY_SIZE(sdp2430_dss_devices),
|
|
.devices = sdp2430_dss_devices,
|
|
.default_device = &sdp2430_lcd_device,
|
|
};
|
|
|
|
static void __init sdp2430_display_init(void)
|
|
{
|
|
int r;
|
|
|
|
static struct gpio gpios[] __initdata = {
|
|
{ SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
|
|
"LCD reset" },
|
|
{ SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW,
|
|
"LCD Backlight" },
|
|
};
|
|
|
|
r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
|
|
if (r) {
|
|
pr_err("Cannot request LCD GPIOs, error %d\n", r);
|
|
return;
|
|
}
|
|
|
|
omap_display_init(&sdp2430_dss_data);
|
|
}
|
|
|
|
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
|
|
|
|
static struct omap_smc91x_platform_data board_smc91x_data = {
|
|
.cs = 5,
|
|
.gpio_irq = 149,
|
|
.flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
|
|
IORESOURCE_IRQ_LOWLEVEL,
|
|
|
|
};
|
|
|
|
static void __init board_smc91x_init(void)
|
|
{
|
|
omap_mux_init_gpio(149, OMAP_PIN_INPUT);
|
|
gpmc_smc91x_init(&board_smc91x_data);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void board_smc91x_init(void)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
|
|
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
|
|
};
|
|
|
|
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
|
|
static struct regulator_init_data sdp2430_vmmc1 = {
|
|
.constraints = {
|
|
.min_uV = 1850000,
|
|
.max_uV = 3150000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(sdp2430_vmmc1_supplies),
|
|
.consumer_supplies = &sdp2430_vmmc1_supplies[0],
|
|
};
|
|
|
|
static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
|
|
};
|
|
|
|
static struct twl4030_platform_data sdp2430_twldata = {
|
|
/* platform_data for children goes here */
|
|
.gpio = &sdp2430_gpio_data,
|
|
.vmmc1 = &sdp2430_vmmc1,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
|
|
{
|
|
I2C_BOARD_INFO("isp1301_omap", 0x2D),
|
|
.flags = I2C_CLIENT_WAKE,
|
|
},
|
|
};
|
|
|
|
static int __init omap2430_i2c_init(void)
|
|
{
|
|
sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
|
|
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
|
|
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
|
|
omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START,
|
|
&sdp2430_twldata);
|
|
return 0;
|
|
}
|
|
|
|
static struct omap2_hsmmc_info mmc[] __initdata = {
|
|
{
|
|
.mmc = 1,
|
|
.caps = MMC_CAP_4_BIT_DATA,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
.ext_clock = 1,
|
|
},
|
|
{} /* Terminator */
|
|
};
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
#endif
|
|
|
|
static void __init omap_2430sdp_init(void)
|
|
{
|
|
omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
|
|
|
|
omap2430_i2c_init();
|
|
|
|
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
|
|
omap_serial_init();
|
|
omap_sdrc_init(NULL, NULL);
|
|
omap_hsmmc_init(mmc);
|
|
|
|
omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
|
|
usb_musb_init(NULL);
|
|
|
|
board_smc91x_init();
|
|
|
|
/* Turn off secondary LCD backlight */
|
|
gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
|
|
"Secondary LCD backlight");
|
|
|
|
sdp2430_display_init();
|
|
}
|
|
|
|
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
|
|
/* Maintainer: Syed Khasim - Texas Instruments Inc */
|
|
.atag_offset = 0x100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap243x_map_io,
|
|
.init_early = omap2430_init_early,
|
|
.init_irq = omap2_init_irq,
|
|
.handle_irq = omap2_intc_handle_irq,
|
|
.init_machine = omap_2430sdp_init,
|
|
.init_late = omap2430_init_late,
|
|
.timer = &omap2_timer,
|
|
.restart = omap_prcm_restart,
|
|
MACHINE_END
|