6e740f9a85
This code should be private to mach-omap2. The only use for it in for omap1 has been in dmtimer.c to check for context loss. However, omap1 does not lose context during idle, so the code is not needed. Further, omap1 timer has OMAP_TIMER_ALWON set, so omap1 was not hitting omap_pm_get_dev_context_loss_count() test. Cc: Jon Hunter <jon-hunter@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
284 lines
10 KiB
Makefile
284 lines
10 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
# Common support
|
|
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
|
|
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
|
|
omap_device.o sram.o
|
|
|
|
# INTCPS IP block support - XXX should be moved to drivers/
|
|
obj-$(CONFIG_ARCH_OMAP2) += irq.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += irq.o
|
|
obj-$(CONFIG_SOC_AM33XX) += irq.o
|
|
|
|
# Secure monitor API support
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap-smc.o omap-secure.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap-smc.o omap-secure.o
|
|
obj-$(CONFIG_SOC_OMAP5) += omap-smc.o omap-secure.o
|
|
|
|
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
|
|
obj-y += mcbsp.o
|
|
endif
|
|
|
|
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
|
|
|
|
# SMP support ONLY available for OMAP4
|
|
|
|
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
|
|
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o
|
|
obj-$(CONFIG_SOC_OMAP5) += omap4-common.o omap-wakeupgen.o
|
|
|
|
plus_sec := $(call as-instr,.arch_extension sec,+sec)
|
|
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
|
|
# Functions loaded to SRAM
|
|
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
|
|
|
|
AFLAGS_sram242x.o :=-Wa,-march=armv6
|
|
AFLAGS_sram243x.o :=-Wa,-march=armv6
|
|
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
|
|
|
|
# Pin multiplexing
|
|
obj-$(CONFIG_SOC_OMAP2420) += mux2420.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += mux2430.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o
|
|
|
|
# SMS/SDRC
|
|
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
|
|
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
|
|
obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
|
|
|
|
# OPP table initialization
|
|
ifeq ($(CONFIG_PM_OPP),y)
|
|
obj-y += opp.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
|
|
endif
|
|
|
|
# Power Management
|
|
ifeq ($(CONFIG_PM),y)
|
|
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o sleep24xx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
|
|
obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o
|
|
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
|
|
obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
|
|
|
|
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
|
|
obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
|
|
|
|
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
|
|
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
|
|
|
|
ifeq ($(CONFIG_PM_VERBOSE),y)
|
|
CFLAGS_pm_bus.o += -DDEBUG
|
|
endif
|
|
|
|
endif
|
|
|
|
ifeq ($(CONFIG_CPU_IDLE),y)
|
|
obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
|
|
endif
|
|
|
|
# PRCM
|
|
obj-y += prcm.o prm_common.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += cm2xxx_3xxx.o prm2xxx_3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += cm2xxx_3xxx.o prm2xxx_3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
|
|
obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o
|
|
omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \
|
|
prcm_mpu44xx.o prminst44xx.o \
|
|
vc44xx_data.o vp44xx_data.o \
|
|
prm44xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common)
|
|
obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
|
|
|
|
# OMAP voltage domains
|
|
obj-y += voltage.o vc.o vp.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
|
|
obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
|
|
|
|
# OMAP powerdomain framework
|
|
obj-y += powerdomain.o powerdomain-common.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += powerdomain2xxx_3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += powerdomain2xxx_3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
|
|
obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
|
|
obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
|
|
obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o
|
|
|
|
# PRCM clockdomain control
|
|
obj-y += clockdomain.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
|
|
obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
|
|
obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
|
|
obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o
|
|
|
|
# Clock framework
|
|
obj-y += clock.o clock_common_data.o \
|
|
clkt_dpll.o clkt_clksel.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o clkt2xxx_sys.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clock3xxx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o clkt_iclk.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += clock44xx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
|
|
obj-$(CONFIG_SOC_AM33XX) += dpll3xxx.o clock33xx_data.o
|
|
obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
|
|
|
|
# OMAP2 clock rate set data (old "OPP" data)
|
|
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
|
|
|
|
# hwmod data
|
|
obj-y += omap_hwmod_common_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_interconnect_data.o
|
|
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_3xxx_ipblock_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_interconnect_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_3xxx_interconnect_data.o
|
|
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_interconnect_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
|
|
obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
|
|
|
|
# EMU peripherals
|
|
obj-$(CONFIG_OMAP3_EMU) += emu.o
|
|
obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o
|
|
|
|
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
|
|
mailbox_mach-objs := mailbox.o
|
|
|
|
obj-$(CONFIG_OMAP_IOMMU) += iommu2.o
|
|
|
|
iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
|
|
obj-y += $(iommu-m) $(iommu-y)
|
|
|
|
ifneq ($(CONFIG_TIDSPBRIDGE),)
|
|
obj-y += dsp.o
|
|
endif
|
|
|
|
# OMAP2420 MSDI controller integration support ("MMC")
|
|
obj-$(CONFIG_SOC_OMAP2420) += msdi.o
|
|
|
|
ifneq ($(CONFIG_DRM_OMAP),)
|
|
obj-y += drm.o
|
|
endif
|
|
|
|
# Specific board support
|
|
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
|
|
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
|
|
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
|
|
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
|
|
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
|
|
obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
|
|
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
|
|
obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
|
|
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
|
|
obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
|
|
obj-$(CONFIG_MACH_OVERO) += board-overo.o
|
|
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
|
|
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
|
|
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
|
|
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
|
|
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o sdram-nokia.o
|
|
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o
|
|
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o
|
|
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o board-zoom-peripherals.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom-display.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom-debugboard.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o board-zoom-peripherals.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom-display.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom-debugboard.o
|
|
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o
|
|
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-peripherals.o
|
|
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-display.o
|
|
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
|
|
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
|
|
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
|
|
obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o
|
|
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
|
|
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o
|
|
|
|
obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o
|
|
|
|
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
|
|
|
|
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
|
|
|
|
obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
|
|
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
|
|
obj-$(CONFIG_MACH_TI8148EVM) += board-ti8168evm.o
|
|
|
|
# Platform specific device init code
|
|
|
|
omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o
|
|
omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o
|
|
obj-y += $(omap-flash-y) $(omap-flash-m)
|
|
|
|
omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o
|
|
obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
|
|
|
|
obj-y += usb-musb.o
|
|
obj-y += omap_phy_internal.o
|
|
|
|
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
|
|
obj-y += usb-host.o
|
|
|
|
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
|
|
obj-y += $(onenand-m) $(onenand-y)
|
|
|
|
nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
|
|
obj-y += $(nand-m) $(nand-y)
|
|
|
|
smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
|
|
obj-y += $(smc91x-m) $(smc91x-y)
|
|
|
|
smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
|
|
obj-y += $(smsc911x-m) $(smsc911x-y)
|
|
ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
|
|
obj-y += hwspinlock.o
|
|
endif
|
|
|
|
emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o
|
|
obj-y += $(emac-m) $(emac-y)
|
|
|
|
obj-y += common-board-devices.o twl-common.o
|