kernel-fxtec-pro1x/arch/powerpc/platforms/pasemi/gpio_mdio.c
Stephen Rothwell 12d371a69e [POWERPC] get_property cleanups
Just another pass through arch/powerpc for old usages.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:05 +10:00

339 lines
6.7 KiB
C

/*
* Copyright (C) 2006-2007 PA Semi, Inc
*
* Author: Olof Johansson, PA Semi
*
* Maintained by: Olof Johansson <olof@lixom.net>
*
* Based on drivers/net/fs_enet/mii-bitbang.c.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <asm/of_platform.h>
#define DELAY 1
static void __iomem *gpio_regs;
struct gpio_priv {
int mdc_pin;
int mdio_pin;
};
#define MDC_PIN(bus) (((struct gpio_priv *)bus->priv)->mdc_pin)
#define MDIO_PIN(bus) (((struct gpio_priv *)bus->priv)->mdio_pin)
static inline void mdio_lo(struct mii_bus *bus)
{
out_le32(gpio_regs+0x10, 1 << MDIO_PIN(bus));
}
static inline void mdio_hi(struct mii_bus *bus)
{
out_le32(gpio_regs, 1 << MDIO_PIN(bus));
}
static inline void mdc_lo(struct mii_bus *bus)
{
out_le32(gpio_regs+0x10, 1 << MDC_PIN(bus));
}
static inline void mdc_hi(struct mii_bus *bus)
{
out_le32(gpio_regs, 1 << MDC_PIN(bus));
}
static inline void mdio_active(struct mii_bus *bus)
{
out_le32(gpio_regs+0x20, (1 << MDC_PIN(bus)) | (1 << MDIO_PIN(bus)));
}
static inline void mdio_tristate(struct mii_bus *bus)
{
out_le32(gpio_regs+0x30, (1 << MDIO_PIN(bus)));
}
static inline int mdio_read(struct mii_bus *bus)
{
return !!(in_le32(gpio_regs+0x40) & (1 << MDIO_PIN(bus)));
}
static void clock_out(struct mii_bus *bus, int bit)
{
if (bit)
mdio_hi(bus);
else
mdio_lo(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
mdc_lo(bus);
}
/* Utility to send the preamble, address, and register (common to read and write). */
static void bitbang_pre(struct mii_bus *bus, int read, u8 addr, u8 reg)
{
int i;
/* CFE uses a really long preamble (40 bits). We'll do the same. */
mdio_active(bus);
for (i = 0; i < 40; i++) {
clock_out(bus, 1);
}
/* send the start bit (01) and the read opcode (10) or write (10) */
clock_out(bus, 0);
clock_out(bus, 1);
clock_out(bus, read);
clock_out(bus, !read);
/* send the PHY address */
for (i = 0; i < 5; i++) {
clock_out(bus, (addr & 0x10) != 0);
addr <<= 1;
}
/* send the register address */
for (i = 0; i < 5; i++) {
clock_out(bus, (reg & 0x10) != 0);
reg <<= 1;
}
}
static int gpio_mdio_read(struct mii_bus *bus, int phy_id, int location)
{
u16 rdreg;
int ret, i;
u8 addr = phy_id & 0xff;
u8 reg = location & 0xff;
bitbang_pre(bus, 1, addr, reg);
/* tri-state our MDIO I/O pin so we can read */
mdio_tristate(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
mdc_lo(bus);
/* read 16 bits of register data, MSB first */
rdreg = 0;
for (i = 0; i < 16; i++) {
mdc_lo(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
mdc_lo(bus);
udelay(DELAY);
rdreg <<= 1;
rdreg |= mdio_read(bus);
}
mdc_hi(bus);
udelay(DELAY);
mdc_lo(bus);
udelay(DELAY);
ret = rdreg;
return ret;
}
static int gpio_mdio_write(struct mii_bus *bus, int phy_id, int location, u16 val)
{
int i;
u8 addr = phy_id & 0xff;
u8 reg = location & 0xff;
u16 value = val & 0xffff;
bitbang_pre(bus, 0, addr, reg);
/* send the turnaround (10) */
mdc_lo(bus);
mdio_hi(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
mdc_lo(bus);
mdio_lo(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
/* write 16 bits of register data, MSB first */
for (i = 0; i < 16; i++) {
mdc_lo(bus);
if (value & 0x8000)
mdio_hi(bus);
else
mdio_lo(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
value <<= 1;
}
/*
* Tri-state the MDIO line.
*/
mdio_tristate(bus);
mdc_lo(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
return 0;
}
static int gpio_mdio_reset(struct mii_bus *bus)
{
/*nothing here - dunno how to reset it*/
return 0;
}
static int __devinit gpio_mdio_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
struct device *dev = &ofdev->dev;
struct device_node *np = ofdev->node;
struct device_node *gpio_np;
struct mii_bus *new_bus;
struct resource res;
struct gpio_priv *priv;
const unsigned int *prop;
int err = 0;
int i;
gpio_np = of_find_compatible_node(NULL, "gpio", "1682m-gpio");
if (!gpio_np)
return -ENODEV;
err = of_address_to_resource(gpio_np, 0, &res);
of_node_put(gpio_np);
if (err)
return -EINVAL;
if (!gpio_regs)
gpio_regs = ioremap(res.start, 0x100);
if (!gpio_regs)
return -EPERM;
priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
if (priv == NULL)
return -ENOMEM;
new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
if (new_bus == NULL)
return -ENOMEM;
new_bus->name = "pasemi gpio mdio bus",
new_bus->read = &gpio_mdio_read,
new_bus->write = &gpio_mdio_write,
new_bus->reset = &gpio_mdio_reset,
prop = of_get_property(np, "reg", NULL);
new_bus->id = *prop;
new_bus->priv = priv;
new_bus->phy_mask = 0;
new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
for(i = 0; i < PHY_MAX_ADDR; ++i)
new_bus->irq[i] = irq_create_mapping(NULL, 10);
prop = of_get_property(np, "mdc-pin", NULL);
priv->mdc_pin = *prop;
prop = of_get_property(np, "mdio-pin", NULL);
priv->mdio_pin = *prop;
new_bus->dev = dev;
dev_set_drvdata(dev, new_bus);
err = mdiobus_register(new_bus);
if (0 != err) {
printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
new_bus->name, err);
goto bus_register_fail;
}
return 0;
bus_register_fail:
kfree(new_bus);
return err;
}
static int gpio_mdio_remove(struct of_device *dev)
{
struct mii_bus *bus = dev_get_drvdata(&dev->dev);
mdiobus_unregister(bus);
dev_set_drvdata(&dev->dev, NULL);
kfree(bus->priv);
bus->priv = NULL;
kfree(bus);
return 0;
}
static struct of_device_id gpio_mdio_match[] =
{
{
.compatible = "gpio-mdio",
},
{},
};
static struct of_platform_driver gpio_mdio_driver =
{
.name = "gpio-mdio-bitbang",
.match_table = gpio_mdio_match,
.probe = gpio_mdio_probe,
.remove = gpio_mdio_remove,
};
int gpio_mdio_init(void)
{
return of_register_platform_driver(&gpio_mdio_driver);
}
void gpio_mdio_exit(void)
{
of_unregister_platform_driver(&gpio_mdio_driver);
}
device_initcall(gpio_mdio_init);