Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/arm/mach-exynos/mach-universal_c210.c
Linus Torvalds 6fa52ed33b ARM: arm-soc driver changes for 3.10 
This is a rather large set of patches for device drivers that for one
 reason or another the subsystem maintainer preferred to get merged
 through the arm-soc tree. There are both new drivers as well as
 existing drivers that are getting converted from platform-specific
 code into standalone drivers using the appropriate subsystem
 specific interfaces.
 
 In particular, we can now have pinctrl, clk, clksource and irqchip
 drivers in one file per driver, without the need to call into
 platform specific interface, or to get called from platform specific
 code, as long as all information about the hardware is provided
 through a device tree.
 
 Most of the drivers we touch this time are for clocksource. Since
 now most of them are part of drivers/clocksource, I expect that we
 won't have to touch these again from arm-soc and can let the
 clocksource maintainers take care of these in the future.
 
 Another larger part of this series is specific to the exynos platform,
 which is seeing some significant effort in upstreaming and
 modernization of its device drivers this time around, which
 unfortunately is also the cause for the churn and a lot of the
 merge conflicts.
 
 There is one new subsystem that gets merged as part of this series:
 the reset controller interface, which is a very simple interface
 for taking devices on the SoC out of reset or back into reset.
 Patches to use this interface on i.MX follow later in this merge
 window, and we are going to have other platforms (at least tegra
 and sirf) get converted in 3.11. This will let us get rid of
 platform specific callbacks in a number of platform independent
 device drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhKUsAAoJEIwa5zzehBx3Ug4P/RqEen15hxS/NY8SIVRAU5c0
 G9ZiSPcLmvXGR/t1RZFeLWKaKOYRb2oW1EbXrlkddprkmg85RuQE/KMpCgzPPhVC
 Yrs8UaagMGblaLOjwavVjin/CUXZokRdMfsQoIyMGOezmVGFnv4d4Kt64IOf35DF
 24vDv/QO0BAI9k6m6WLqlWvSshb0IkW8r2LneRLnMEAVop7b1xkOxz0sR6l0LWfV
 6JAMXyTjJMg0t8uCVW/QyNdxcxINHhV4SYcNkzF3EZ7ol50OiJsT9fg0XW759+Wb
 vlX6Xuehg+CBOg+g3ZOZuR8JOEkOhAGRSzuJkk/TmLCCxc+ghnuYz8HArxh6GMHK
 KaxvogLIi0ZsD94A/BZIKkDtOLWlzdz2HBrYo9PTz8zrOz/gXhwQ3zq0jPccC5E0
 S+YYiobCBXepknF9301ti7wGD9VDzI8nmqOKG6tEBrD3xuO+RoBv+z4pBugN4/1C
 DlB19gOz60G5kniziL+wlmWER2qXmYrQZqS+s6+B2XoyoETC0Yij3Rck5vyC6qIK
 A2sni+Y9rzNOB9nzmnISP/UiGUffCy8AV4DZJjMSl0XkF4cpOXqRVGZ2nGB4tR5q
 GTOETcDCo5dvMDKX7Wfrz40CQzO39tnPCddg3OIS93ZwMpCeykIlb1FVL7RcsyF7
 3uikzYHlDo3C5pvtJ5TS
 =ZWk9
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...
2013-05-04 12:31:18 -07:00

1160 lines
29 KiB
C
Raw Blame History

/* linux/arch/arm/mach-exynos4/mach-universal_c210.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/mfd/max8998.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/max8952.h>
#include <linux/mmc/host.h>
#include <linux/i2c-gpio.h>
#include <linux/i2c/mcs.h>
#include <linux/i2c/atmel_mxt_ts.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mipi-csis.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <drm/exynos_drm.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <video/samsung_fimd.h>
#include <plat/regs-serial.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/fb.h>
#include <plat/mfc.h>
#include <plat/sdhci.h>
#include <plat/fimc-core.h>
#include <plat/samsung-time.h>
#include <plat/camport.h>
#include <mach/map.h>
#include <media/v4l2-mediabus.h>
#include <media/s5p_fimc.h>
#include <media/m5mols.h>
#include <media/s5k6aa.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8
#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG256 | \
S5PV210_UFCON_RXTRIG256)
static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.ucon = UNIVERSAL_UCON_DEFAULT,
.ulcon = UNIVERSAL_ULCON_DEFAULT,
.ufcon = UNIVERSAL_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.ucon = UNIVERSAL_UCON_DEFAULT,
.ulcon = UNIVERSAL_ULCON_DEFAULT,
.ufcon = UNIVERSAL_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.ucon = UNIVERSAL_UCON_DEFAULT,
.ulcon = UNIVERSAL_ULCON_DEFAULT,
.ufcon = UNIVERSAL_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.ucon = UNIVERSAL_UCON_DEFAULT,
.ulcon = UNIVERSAL_ULCON_DEFAULT,
.ufcon = UNIVERSAL_UFCON_DEFAULT,
},
};
static struct regulator_consumer_supply max8952_consumer =
REGULATOR_SUPPLY("vdd_arm", NULL);
static struct regulator_init_data universal_max8952_reg_data = {
.constraints = {
.name = "VARM_1.2V",
.min_uV = 770000,
.max_uV = 1400000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.always_on = 1,
.boot_on = 1,
},
.num_consumer_supplies = 1,
.consumer_supplies = &max8952_consumer,
};
static struct max8952_platform_data universal_max8952_pdata __initdata = {
.gpio_vid0 = EXYNOS4_GPX0(3),
.gpio_vid1 = EXYNOS4_GPX0(4),
.gpio_en = -1, /* Not controllable, set "Always High" */
.default_mode = 0, /* vid0 = 0, vid1 = 0 */
.dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */
.sync_freq = 0, /* default: fastest */
.ramp_speed = 0, /* default: fastest */
.reg_data = &universal_max8952_reg_data,
};
static struct regulator_consumer_supply lp3974_buck1_consumer =
REGULATOR_SUPPLY("vdd_int", NULL);
static struct regulator_consumer_supply lp3974_buck2_consumer =
REGULATOR_SUPPLY("vddg3d", NULL);
static struct regulator_consumer_supply lp3974_buck3_consumer[] = {
REGULATOR_SUPPLY("vdet", "s5p-sdo"),
REGULATOR_SUPPLY("vdd_reg", "0-003c"),
};
static struct regulator_init_data lp3974_buck1_data = {
.constraints = {
.name = "VINT_1.1V",
.min_uV = 750000,
.max_uV = 1500000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.boot_on = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_buck1_consumer,
};
static struct regulator_init_data lp3974_buck2_data = {
.constraints = {
.name = "VG3D_1.1V",
.min_uV = 750000,
.max_uV = 1500000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.boot_on = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_buck2_consumer,
};
static struct regulator_init_data lp3974_buck3_data = {
.constraints = {
.name = "VCC_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer),
.consumer_supplies = lp3974_buck3_consumer,
};
static struct regulator_init_data lp3974_buck4_data = {
.constraints = {
.name = "VMEM_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo2_data = {
.constraints = {
.name = "VALIVE_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"),
};
static struct regulator_init_data lp3974_ldo3_data = {
.constraints = {
.name = "VUSB+MIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
.consumer_supplies = lp3974_ldo3_consumer,
};
static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
};
static struct regulator_init_data lp3974_ldo4_data = {
.constraints = {
.name = "VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
.consumer_supplies = lp3974_ldo4_consumer,
};
static struct regulator_init_data lp3974_ldo5_data = {
.constraints = {
.name = "VTF_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo6_data = {
.constraints = {
.name = "LDO6",
.min_uV = 2000000,
.max_uV = 2000000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"),
};
static struct regulator_init_data lp3974_ldo7_data = {
.constraints = {
.name = "VLCD+VMIPI_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer),
.consumer_supplies = lp3974_ldo7_consumer,
};
static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
};
static struct regulator_init_data lp3974_ldo8_data = {
.constraints = {
.name = "VUSB+VDAC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
.consumer_supplies = lp3974_ldo8_consumer,
};
static struct regulator_consumer_supply lp3974_ldo9_consumer =
REGULATOR_SUPPLY("vddio", "0-003c");
static struct regulator_init_data lp3974_ldo9_data = {
.constraints = {
.name = "VCC_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_ldo9_consumer,
};
static struct regulator_init_data lp3974_ldo10_data = {
.constraints = {
.name = "VPLL_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.boot_on = 1,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_consumer_supply lp3974_ldo11_consumer =
REGULATOR_SUPPLY("dig_28", "0-001f");
static struct regulator_init_data lp3974_ldo11_data = {
.constraints = {
.name = "CAM_AF_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_ldo11_consumer,
};
static struct regulator_init_data lp3974_ldo12_data = {
.constraints = {
.name = "PS_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo13_data = {
.constraints = {
.name = "VHIC_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_consumer_supply lp3974_ldo14_consumer =
REGULATOR_SUPPLY("dig_18", "0-001f");
static struct regulator_init_data lp3974_ldo14_data = {
.constraints = {
.name = "CAM_I_HOST_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_ldo14_consumer,
};
static struct regulator_consumer_supply lp3974_ldo15_consumer =
REGULATOR_SUPPLY("dig_12", "0-001f");
static struct regulator_init_data lp3974_ldo15_data = {
.constraints = {
.name = "CAM_S_DIG+FM33_CORE_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_ldo15_consumer,
};
static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
REGULATOR_SUPPLY("vdda", "0-003c"),
REGULATOR_SUPPLY("a_sensor", "0-001f"),
};
static struct regulator_init_data lp3974_ldo16_data = {
.constraints = {
.name = "CAM_S_ANA_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer),
.consumer_supplies = lp3974_ldo16_consumer,
};
static struct regulator_init_data lp3974_ldo17_data = {
.constraints = {
.name = "VCC_3.0V_LCD",
.min_uV = 3000000,
.max_uV = 3000000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.boot_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_32khz_ap_data = {
.constraints = {
.name = "32KHz AP",
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data lp3974_32khz_cp_data = {
.constraints = {
.name = "32KHz CP",
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_vichg_data = {
.constraints = {
.name = "VICHG",
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_esafeout1_data = {
.constraints = {
.name = "SAFEOUT1",
.min_uV = 4800000,
.max_uV = 4800000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data lp3974_esafeout2_data = {
.constraints = {
.name = "SAFEOUT2",
.boot_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.enabled = 1,
},
},
};
static struct max8998_regulator_data lp3974_regulators[] = {
{ MAX8998_LDO2, &lp3974_ldo2_data },
{ MAX8998_LDO3, &lp3974_ldo3_data },
{ MAX8998_LDO4, &lp3974_ldo4_data },
{ MAX8998_LDO5, &lp3974_ldo5_data },
{ MAX8998_LDO6, &lp3974_ldo6_data },
{ MAX8998_LDO7, &lp3974_ldo7_data },
{ MAX8998_LDO8, &lp3974_ldo8_data },
{ MAX8998_LDO9, &lp3974_ldo9_data },
{ MAX8998_LDO10, &lp3974_ldo10_data },
{ MAX8998_LDO11, &lp3974_ldo11_data },
{ MAX8998_LDO12, &lp3974_ldo12_data },
{ MAX8998_LDO13, &lp3974_ldo13_data },
{ MAX8998_LDO14, &lp3974_ldo14_data },
{ MAX8998_LDO15, &lp3974_ldo15_data },
{ MAX8998_LDO16, &lp3974_ldo16_data },
{ MAX8998_LDO17, &lp3974_ldo17_data },
{ MAX8998_BUCK1, &lp3974_buck1_data },
{ MAX8998_BUCK2, &lp3974_buck2_data },
{ MAX8998_BUCK3, &lp3974_buck3_data },
{ MAX8998_BUCK4, &lp3974_buck4_data },
{ MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data },
{ MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data },
{ MAX8998_ENVICHG, &lp3974_vichg_data },
{ MAX8998_ESAFEOUT1, &lp3974_esafeout1_data },
{ MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
};
static struct max8998_platform_data universal_lp3974_pdata = {
.num_regulators = ARRAY_SIZE(lp3974_regulators),
.regulators = lp3974_regulators,
.buck1_voltage1 = 1100000, /* INT */
.buck1_voltage2 = 1000000,
.buck1_voltage3 = 1100000,
.buck1_voltage4 = 1000000,
.buck1_set1 = EXYNOS4_GPX0(5),
.buck1_set2 = EXYNOS4_GPX0(6),
.buck2_voltage1 = 1200000, /* G3D */
.buck2_voltage2 = 1100000,
.buck1_default_idx = 0,
.buck2_set3 = EXYNOS4_GPE2(0),
.buck2_default_idx = 0,
.wakeup = true,
};
enum fixed_regulator_id {
FIXED_REG_ID_MMC0,
FIXED_REG_ID_HDMI_5V,
FIXED_REG_ID_CAM_S_IF,
FIXED_REG_ID_CAM_I_CORE,
FIXED_REG_ID_CAM_VT_DIO,
};
static struct regulator_consumer_supply hdmi_fixed_consumer =
REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
static struct regulator_init_data hdmi_fixed_voltage_init_data = {
.constraints = {
.name = "HDMI_5V",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &hdmi_fixed_consumer,
};
static struct fixed_voltage_config hdmi_fixed_voltage_config = {
.supply_name = "HDMI_EN1",
.microvolts = 5000000,
.gpio = EXYNOS4_GPE0(1),
.enable_high = true,
.init_data = &hdmi_fixed_voltage_init_data,
};
static struct platform_device hdmi_fixed_voltage = {
.name = "reg-fixed-voltage",
.id = FIXED_REG_ID_HDMI_5V,
.dev = {
.platform_data = &hdmi_fixed_voltage_config,
},
};
/* GPIO I2C 5 (PMIC) */
static struct i2c_board_info i2c5_devs[] __initdata = {
{
I2C_BOARD_INFO("max8952", 0xC0 >> 1),
.platform_data = &universal_max8952_pdata,
}, {
I2C_BOARD_INFO("lp3974", 0xCC >> 1),
.platform_data = &universal_lp3974_pdata,
},
};
/* I2C3 (TSP) */
static struct mxt_platform_data qt602240_platform_data = {
.x_line = 19,
.y_line = 11,
.x_size = 800,
.y_size = 480,
.blen = 0x11,
.threshold = 0x28,
.voltage = 2800000, /* 2.8V */
.orient = MXT_DIAGONAL,
.irqflags = IRQF_TRIGGER_FALLING,
};
static struct i2c_board_info i2c3_devs[] __initdata = {
{
I2C_BOARD_INFO("qt602240_ts", 0x4a),
.platform_data = &qt602240_platform_data,
},
};
static void __init universal_tsp_init(void)
{
int gpio;
/* TSP_LDO_ON: XMDMADDR_11 */
gpio = EXYNOS4_GPE2(3);
gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
gpio_export(gpio, 0);
/* TSP_INT: XMDMADDR_7 */
gpio = EXYNOS4_GPE1(7);
gpio_request(gpio, "TSP_INT");
s5p_register_gpio_interrupt(gpio);
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
i2c3_devs[0].irq = gpio_to_irq(gpio);
}
/* GPIO I2C 12 (3 Touchkey) */
static uint32_t touchkey_keymap[] = {
/* MCS_KEY_MAP(value, keycode) */
MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */
MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */
};
static struct mcs_platform_data touchkey_data = {
.keymap = touchkey_keymap,
.keymap_size = ARRAY_SIZE(touchkey_keymap),
.key_maxval = 2,
};
/* GPIO I2C 3_TOUCH 2.8V */
#define I2C_GPIO_BUS_12 12
static struct i2c_gpio_platform_data i2c_gpio12_data = {
.sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */
.scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */
};
static struct platform_device i2c_gpio12 = {
.name = "i2c-gpio",
.id = I2C_GPIO_BUS_12,
.dev = {
.platform_data = &i2c_gpio12_data,
},
};
static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
{
I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
.platform_data = &touchkey_data,
},
};
static void __init universal_touchkey_init(void)
{
int gpio;
gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */
gpio_request(gpio, "3_TOUCH_INT");
s5p_register_gpio_interrupt(gpio);
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
}
static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
.frequency = 300 * 1000,
.sda_delay = 200,
};
/* GPIO KEYS */
static struct gpio_keys_button universal_gpio_keys_tables[] = {
{
.code = KEY_VOLUMEUP,
.gpio = EXYNOS4_GPX2(0), /* XEINT16 */
.desc = "gpio-keys: KEY_VOLUMEUP",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_VOLUMEDOWN,
.gpio = EXYNOS4_GPX2(1), /* XEINT17 */
.desc = "gpio-keys: KEY_VOLUMEDOWN",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_CONFIG,
.gpio = EXYNOS4_GPX2(2), /* XEINT18 */
.desc = "gpio-keys: KEY_CONFIG",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_CAMERA,
.gpio = EXYNOS4_GPX2(3), /* XEINT19 */
.desc = "gpio-keys: KEY_CAMERA",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_OK,
.gpio = EXYNOS4_GPX3(5), /* XEINT29 */
.desc = "gpio-keys: KEY_OK",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
},
};
static struct gpio_keys_platform_data universal_gpio_keys_data = {
.buttons = universal_gpio_keys_tables,
.nbuttons = ARRAY_SIZE(universal_gpio_keys_tables),
};
static struct platform_device universal_gpio_keys = {
.name = "gpio-keys",
.dev = {
.platform_data = &universal_gpio_keys_data,
},
};
/* eMMC */
static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
.max_width = 8,
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
static struct regulator_consumer_supply mmc0_supplies[] = {
REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
};
static struct regulator_init_data mmc0_fixed_voltage_init_data = {
.constraints = {
.name = "VMEM_VDD_2.8V",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(mmc0_supplies),
.consumer_supplies = mmc0_supplies,
};
static struct fixed_voltage_config mmc0_fixed_voltage_config = {
.supply_name = "MASSMEMORY_EN",
.microvolts = 2800000,
.gpio = EXYNOS4_GPE1(3),
.enable_high = true,
.init_data = &mmc0_fixed_voltage_init_data,
};
static struct platform_device mmc0_fixed_voltage = {
.name = "reg-fixed-voltage",
.id = FIXED_REG_ID_MMC0,
.dev = {
.platform_data = &mmc0_fixed_voltage_config,
},
};
/* SD */
static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
.max_width = 4,
.host_caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */
.ext_cd_gpio_invert = 1,
.cd_type = S3C_SDHCI_CD_GPIO,
};
/* WiFi */
static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
.max_width = 4,
.host_caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.cd_type = S3C_SDHCI_CD_EXTERNAL,
};
static void __init universal_sdhci_init(void)
{
s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
}
/* I2C1 */
static struct i2c_board_info i2c1_devs[] __initdata = {
/* Gyro, To be updated */
};
#ifdef CONFIG_DRM_EXYNOS
static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
.panel = {
.timing = {
.left_margin = 16,
.right_margin = 16,
.upper_margin = 2,
.lower_margin = 28,
.hsync_len = 2,
.vsync_len = 1,
.xres = 480,
.yres = 800,
.refresh = 55,
},
},
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
VIDCON0_CLKSEL_LCD,
.vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
| VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.default_win = 3,
.bpp = 32,
};
#else
/* Frame Buffer */
static struct s3c_fb_pd_win universal_fb_win0 = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 480,
.yres = 800,
.virtual_x = 480,
.virtual_y = 2 * 800,
};
static struct fb_videomode universal_lcd_timing = {
.left_margin = 16,
.right_margin = 16,
.upper_margin = 2,
.lower_margin = 28,
.hsync_len = 2,
.vsync_len = 1,
.xres = 480,
.yres = 800,
.refresh = 55,
};
static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
.win[0] = &universal_fb_win0,
.vtiming = &universal_lcd_timing,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
VIDCON0_CLKSEL_LCD,
.vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
| VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
#endif
static struct regulator_consumer_supply cam_vt_dio_supply =
REGULATOR_SUPPLY("vdd_core", "0-003c");
static struct regulator_init_data cam_vt_dio_reg_init_data = {
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
.num_consumer_supplies = 1,
.consumer_supplies = &cam_vt_dio_supply,
};
static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
.supply_name = "CAM_VT_D_IO",
.microvolts = 2800000,
.gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
.enable_high = 1,
.init_data = &cam_vt_dio_reg_init_data,
};
static struct platform_device cam_vt_dio_fixed_reg_dev = {
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO,
.dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg },
};
static struct regulator_consumer_supply cam_i_core_supply =
REGULATOR_SUPPLY("core", "0-001f");
static struct regulator_init_data cam_i_core_reg_init_data = {
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
.num_consumer_supplies = 1,
.consumer_supplies = &cam_i_core_supply,
};
static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
.supply_name = "CAM_I_CORE_1.2V",
.microvolts = 1200000,
.gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */
.enable_high = 1,
.init_data = &cam_i_core_reg_init_data,
};
static struct platform_device cam_i_core_fixed_reg_dev = {
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
.dev = { .platform_data = &cam_i_core_fixed_voltage_cfg },
};
static struct regulator_consumer_supply cam_s_if_supply =
REGULATOR_SUPPLY("d_sensor", "0-001f");
static struct regulator_init_data cam_s_if_reg_init_data = {
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
.num_consumer_supplies = 1,
.consumer_supplies = &cam_s_if_supply,
};
static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
.supply_name = "CAM_S_IF_1.8V",
.microvolts = 1800000,
.gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */
.enable_high = 1,
.init_data = &cam_s_if_reg_init_data,
};
static struct platform_device cam_s_if_fixed_reg_dev = {
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
.dev = { .platform_data = &cam_s_if_fixed_voltage_cfg },
};
static struct s5p_platform_mipi_csis mipi_csis_platdata = {
.clk_rate = 166000000UL,
.lanes = 2,
.hs_settle = 12,
};
#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7)
#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6)
static int s5k6aa_set_power(int on)
{
gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
return 0;
}
static struct s5k6aa_platform_data s5k6aa_platdata = {
.mclk_frequency = 21600000UL,
.gpio_reset = { GPIO_CAM_VGA_NRST, 0 },
.gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 },
.bus_type = V4L2_MBUS_PARALLEL,
.horiz_flip = 1,
.set_power = s5k6aa_set_power,
};
static struct i2c_board_info s5k6aa_board_info = {
I2C_BOARD_INFO("S5K6AA", 0x3C),
.platform_data = &s5k6aa_platdata,
};
static int m5mols_set_power(struct device *dev, int on)
{
gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
return 0;
}
static struct m5mols_platform_data m5mols_platdata = {
.gpio_reset = GPIO_CAM_MEGA_nRST,
.reset_polarity = 0,
.set_power = m5mols_set_power,
};
static struct i2c_board_info m5mols_board_info = {
I2C_BOARD_INFO("M5MOLS", 0x1F),
.platform_data = &m5mols_platdata,
};
static struct fimc_source_info universal_camera_sensors[] = {
{
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &s5k6aa_board_info,
.i2c_bus_num = 0,
.clk_frequency = 24000000UL,
}, {
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2,
.board_info = &m5mols_board_info,
.i2c_bus_num = 0,
.clk_frequency = 24000000UL,
},
};
static struct s5p_platform_fimc fimc_md_platdata = {
.source_info = universal_camera_sensors,
.num_clients = ARRAY_SIZE(universal_camera_sensors),
};
static struct gpio universal_camera_gpios[] = {
{ GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
{ GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
{ GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
{ GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
{ GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
{ GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
};
/* USB OTG */
static struct s3c_hsotg_plat universal_hsotg_pdata;
static void __init universal_camera_init(void)
{
s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
&s5p_device_mipi_csis0);
s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
&s5p_device_fimc_md);
if (gpio_request_array(universal_camera_gpios,
ARRAY_SIZE(universal_camera_gpios))) {
pr_err("%s: GPIO request failed\n", __func__);
return;
}
if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
else
pr_err("Failed to configure 8M_ISP_INT GPIO\n");
/* Free GPIOs controlled directly by the sensor drivers. */
gpio_free(GPIO_CAM_MEGA_nRST);
gpio_free(GPIO_CAM_8M_ISP_INT);
gpio_free(GPIO_CAM_VGA_NRST);
gpio_free(GPIO_CAM_VGA_NSTBY);
if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
pr_err("Camera port A setup failed\n");
}
static struct platform_device *universal_devices[] __initdata = {
/* Samsung Platform Devices */
&s5p_device_mipi_csis0,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
&s5p_device_g2d,
&mmc0_fixed_voltage,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_i2c0,
&s3c_device_i2c3,
&s3c_device_i2c5,
&s5p_device_i2c_hdmiphy,
&hdmi_fixed_voltage,
&s5p_device_hdmi,
&s5p_device_sdo,
&s5p_device_mixer,
/* Universal Devices */
&i2c_gpio12,
&universal_gpio_keys,
&s5p_device_onenand,
&s5p_device_fimd0,
&s5p_device_jpeg,
&s3c_device_usb_hsotg,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&cam_vt_dio_fixed_reg_dev,
&cam_i_core_fixed_reg_dev,
&cam_s_if_fixed_reg_dev,
&s5p_device_fimc_md,
};
static void __init universal_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
xxti_f = 0;
xusbxti_f = 24000000;
}
static void s5p_tv_setup(void)
{
/* direct HPD to HDMI chip */
gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
}
static void __init universal_reserve(void)
{
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
}
static void __init universal_machine_init(void)
{
universal_sdhci_init();
s5p_tv_setup();
s3c_i2c0_set_platdata(&universal_i2c0_platdata);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
universal_tsp_init();
s3c_i2c3_set_platdata(NULL);
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
s3c_i2c5_set_platdata(NULL);
s5p_i2c_hdmiphy_set_platdata(NULL);
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
#ifdef CONFIG_DRM_EXYNOS
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
exynos4_fimd0_gpio_setup_24bpp();
#else
s5p_fimd0_set_platdata(&universal_lcd_pdata);
#endif
universal_touchkey_init();
i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
ARRAY_SIZE(i2c_gpio12_devs));
s3c_hsotg_set_platdata(&universal_hsotg_pdata);
universal_camera_init();
/* Last */
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
}
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
.init_machine = universal_machine_init,
.init_late = exynos_init_late,
.init_time = samsung_timer_init,
.reserve = &universal_reserve,
.restart = exynos4_restart,
MACHINE_END
Reference in a new issue View git blame Copy permalink