Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/arm/mach-exynos/Kconfig
Linus Torvalds 6fa52ed33b ARM: arm-soc driver changes for 3.10 
This is a rather large set of patches for device drivers that for one
 reason or another the subsystem maintainer preferred to get merged
 through the arm-soc tree. There are both new drivers as well as
 existing drivers that are getting converted from platform-specific
 code into standalone drivers using the appropriate subsystem
 specific interfaces.
 
 In particular, we can now have pinctrl, clk, clksource and irqchip
 drivers in one file per driver, without the need to call into
 platform specific interface, or to get called from platform specific
 code, as long as all information about the hardware is provided
 through a device tree.
 
 Most of the drivers we touch this time are for clocksource. Since
 now most of them are part of drivers/clocksource, I expect that we
 won't have to touch these again from arm-soc and can let the
 clocksource maintainers take care of these in the future.
 
 Another larger part of this series is specific to the exynos platform,
 which is seeing some significant effort in upstreaming and
 modernization of its device drivers this time around, which
 unfortunately is also the cause for the churn and a lot of the
 merge conflicts.
 
 There is one new subsystem that gets merged as part of this series:
 the reset controller interface, which is a very simple interface
 for taking devices on the SoC out of reset or back into reset.
 Patches to use this interface on i.MX follow later in this merge
 window, and we are going to have other platforms (at least tegra
 and sirf) get converted in 3.11. This will let us get rid of
 platform specific callbacks in a number of platform independent
 device drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhKUsAAoJEIwa5zzehBx3Ug4P/RqEen15hxS/NY8SIVRAU5c0
 G9ZiSPcLmvXGR/t1RZFeLWKaKOYRb2oW1EbXrlkddprkmg85RuQE/KMpCgzPPhVC
 Yrs8UaagMGblaLOjwavVjin/CUXZokRdMfsQoIyMGOezmVGFnv4d4Kt64IOf35DF
 24vDv/QO0BAI9k6m6WLqlWvSshb0IkW8r2LneRLnMEAVop7b1xkOxz0sR6l0LWfV
 6JAMXyTjJMg0t8uCVW/QyNdxcxINHhV4SYcNkzF3EZ7ol50OiJsT9fg0XW759+Wb
 vlX6Xuehg+CBOg+g3ZOZuR8JOEkOhAGRSzuJkk/TmLCCxc+ghnuYz8HArxh6GMHK
 KaxvogLIi0ZsD94A/BZIKkDtOLWlzdz2HBrYo9PTz8zrOz/gXhwQ3zq0jPccC5E0
 S+YYiobCBXepknF9301ti7wGD9VDzI8nmqOKG6tEBrD3xuO+RoBv+z4pBugN4/1C
 DlB19gOz60G5kniziL+wlmWER2qXmYrQZqS+s6+B2XoyoETC0Yij3Rck5vyC6qIK
 A2sni+Y9rzNOB9nzmnISP/UiGUffCy8AV4DZJjMSl0XkF4cpOXqRVGZ2nGB4tR5q
 GTOETcDCo5dvMDKX7Wfrz40CQzO39tnPCddg3OIS93ZwMpCeykIlb1FVL7RcsyF7
 3uikzYHlDo3C5pvtJ5TS
 =ZWk9
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...
2013-05-04 12:31:18 -07:00

455 lines
9.4 KiB
Text
Raw Blame History

# arch/arm/mach-exynos/Kconfig
#
# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
#
# Licensed under GPLv2
# Configuration options for the EXYNOS4
if ARCH_EXYNOS
menu "SAMSUNG EXYNOS SoCs Support"
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
default y
select HAVE_ARM_SCU if SMP
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
Samsung EXYNOS4 SoCs based systems
config ARCH_EXYNOS5
bool "SAMSUNG EXYNOS5"
select HAVE_ARM_SCU if SMP
select HAVE_SMP
help
Samsung EXYNOS5 (Cortex-A15) SoC based systems
comment "EXYNOS SoCs"
config CPU_EXYNOS4210
bool "SAMSUNG EXYNOS4210"
default y
depends on ARCH_EXYNOS4
select ARM_CPU_SUSPEND if PM
select PM_GENERIC_DOMAINS
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
help
Enable EXYNOS4210 CPU support
config SOC_EXYNOS4212
bool "SAMSUNG EXYNOS4212"
default y
depends on ARCH_EXYNOS4
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
help
Enable EXYNOS4212 SoC support
config SOC_EXYNOS4412
bool "SAMSUNG EXYNOS4412"
default y
depends on ARCH_EXYNOS4
select SAMSUNG_DMADEV
help
Enable EXYNOS4412 SoC support
config SOC_EXYNOS5250
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select S5P_DEV_MFC
select SAMSUNG_DMADEV
help
Enable EXYNOS5250 SoC support
config SOC_EXYNOS5440
bool "SAMSUNG EXYNOS5440"
default y
depends on ARCH_EXYNOS5
select ARCH_HAS_OPP
select ARM_ARCH_TIMER
select AUTO_ZRELADDR
select PINCTRL
select PINCTRL_EXYNOS5440
select PM_OPP
help
Enable EXYNOS5440 SoC support
config EXYNOS_ATAGS
bool "ATAGS based boot for EXYNOS (deprecated)"
depends on !ARCH_MULTIPLATFORM
depends on ATAGS
default y
help
The EXYNOS platform is moving towards being completely probed
through device tree. This enables support for board files using
the traditional ATAGS boot format.
Note that this option is not available for multiplatform builds.
if EXYNOS_ATAGS
config EXYNOS_DEV_DMA
bool
help
Compile in amba device definitions for DMA controller
config EXYNOS4_DEV_AHCI
bool
help
Compile in platform device definitions for AHCI
config EXYNOS4_SETUP_FIMD0
bool
help
Common setup code for FIMD0.
config EXYNOS4_DEV_USB_OHCI
bool
help
Compile in platform device definition for USB OHCI
config EXYNOS4_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config EXYNOS4_SETUP_I2C2
bool
help
Common setup code for i2c bus 2.
config EXYNOS4_SETUP_I2C3
bool
help
Common setup code for i2c bus 3.
config EXYNOS4_SETUP_I2C4
bool
help
Common setup code for i2c bus 4.
config EXYNOS4_SETUP_I2C5
bool
help
Common setup code for i2c bus 5.
config EXYNOS4_SETUP_I2C6
bool
help
Common setup code for i2c bus 6.
config EXYNOS4_SETUP_I2C7
bool
help
Common setup code for i2c bus 7.
config EXYNOS4_SETUP_KEYPAD
bool
help
Common setup code for keypad.
config EXYNOS4_SETUP_SDHCI
bool
select EXYNOS4_SETUP_SDHCI_GPIO
help
Internal helper functions for EXYNOS4 based SDHCI systems.
config EXYNOS4_SETUP_SDHCI_GPIO
bool
help
Common setup code for SDHCI gpio.
config EXYNOS4_SETUP_FIMC
bool
help
Common setup code for the camera interfaces.
config EXYNOS4_SETUP_USB_PHY
bool
help
Common setup code for USB PHY controller
config EXYNOS_SETUP_SPI
bool
help
Common setup code for SPI GPIO configurations.
# machine support
if ARCH_EXYNOS4
comment "EXYNOS4210 Boards"
config MACH_SMDKC210
bool "SMDKC210"
select MACH_SMDKV310
help
Machine support for Samsung SMDKC210
config MACH_SMDKV310
bool "SMDKV310"
select CPU_EXYNOS4210
select EXYNOS4_DEV_AHCI
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_TV
select S5P_DEV_USB_EHCI
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
help
Machine support for Samsung SMDKV310
config MACH_ARMLEX4210
bool "ARMLEX4210"
select CPU_EXYNOS4210
select EXYNOS4_DEV_AHCI
select EXYNOS4_SETUP_SDHCI
select EXYNOS_DEV_DMA
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_RTC
select S3C_DEV_WDT
help
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CLKSRC_MMIO
select CPU_EXYNOS4210
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_SYSMMU
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S3C_DEV_USB_HSOTG
select S5P_DEV_CSIS0
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_ONENAND
select S5P_DEV_TV
select S5P_GPIO_INT
select S5P_SETUP_MIPIPHY
select SAMSUNG_HRT
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
config MACH_NURI
bool "Mobile NURI Board"
select CPU_EXYNOS4210
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_I2C6
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S3C_DEV_I2C6
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_CSIS0
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select S5P_GPIO_INT
select S5P_SETUP_MIPIPHY
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.
config MACH_ORIGEN
bool "ORIGEN"
select CPU_EXYNOS4210
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_TV
select S5P_DEV_USB_EHCI
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
help
Machine support for ORIGEN based on Samsung EXYNOS4210
comment "EXYNOS4212 Boards"
config MACH_SMDK4212
bool "SMDK4212"
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C7
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_MFC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select SOC_EXYNOS4212
help
Machine support for Samsung SMDK4212
comment "EXYNOS4412 Boards"
config MACH_SMDK4412
bool "SMDK4412"
select MACH_SMDK4212
select SOC_EXYNOS4412
help
Machine support for Samsung SMDK4412
endif
endif
comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
depends on ARCH_EXYNOS4
select ARM_AMBA
select CLKSRC_OF
select CPU_EXYNOS4210
select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS
select S5P_DEV_MFC
select USE_OF
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the Exynos4 SoC based board.
Note: This is under development and not all peripherals can be supported
with this machine file.
config MACH_EXYNOS5_DT
bool "SAMSUNG EXYNOS5 Machine using device tree"
default y
depends on ARCH_EXYNOS5
select ARM_AMBA
select CLKSRC_OF
select USE_OF
help
Machine support for Samsung EXYNOS5 machine with device tree enabled.
Select this if a fdt blob is available for the EXYNOS5 SoC based board.
if ARCH_EXYNOS4
comment "Configuration for HSMMC 8-bit bus width"
config EXYNOS4_SDHCI_CH0_8BIT
bool "Channel 0 with 8-bit bus"
help
Support HSMMC Channel 0 8-bit bus.
If selected, Channel 1 is disabled.
config EXYNOS4_SDHCI_CH2_8BIT
bool "Channel 2 with 8-bit bus"
help
Support HSMMC Channel 2 8-bit bus.
If selected, Channel 3 is disabled.
endif
endmenu
endif
Reference in a new issue View git blame Copy permalink