kernel-fxtec-pro1x/arch/blackfin/mach-common/cache-c.c
Sonic Zhang 1b6012394b blackfin: Support L1 SRAM parity checking feature on bf60x
Move code for the SEC faults from the IRQ hanlders into IRQ actions.
refine bfin fault routine handle

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-01-29 15:12:20 +08:00

85 lines
1.9 KiB
C

/*
* Blackfin cache control code (simpler control-style functions)
*
* Copyright 2004-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <asm/blackfin.h>
#include <asm/cplbinit.h>
/* Invalidate the Entire Data cache by
* clearing DMC[1:0] bits
*/
void blackfin_invalidate_entire_dcache(void)
{
u32 dmem = bfin_read_DMEM_CONTROL();
bfin_write_DMEM_CONTROL(dmem & ~0xc);
SSYNC();
bfin_write_DMEM_CONTROL(dmem);
SSYNC();
}
/* Invalidate the Entire Instruction cache by
* clearing IMC bit
*/
void blackfin_invalidate_entire_icache(void)
{
u32 imem = bfin_read_IMEM_CONTROL();
bfin_write_IMEM_CONTROL(imem & ~0x4);
SSYNC();
bfin_write_IMEM_CONTROL(imem);
SSYNC();
}
#if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE)
static void
bfin_cache_init(struct cplb_entry *cplb_tbl, unsigned long cplb_addr,
unsigned long cplb_data, unsigned long mem_control,
unsigned long mem_mask)
{
int i;
#ifdef CONFIG_L1_PARITY_CHECK
u32 ctrl;
if (cplb_addr == DCPLB_ADDR0) {
ctrl = bfin_read32(mem_control) | (1 << RDCHK);
CSYNC();
bfin_write32(mem_control, ctrl);
SSYNC();
}
#endif
for (i = 0; i < MAX_CPLBS; i++) {
bfin_write32(cplb_addr + i * 4, cplb_tbl[i].addr);
bfin_write32(cplb_data + i * 4, cplb_tbl[i].data);
}
_enable_cplb(mem_control, mem_mask);
}
#ifdef CONFIG_BFIN_ICACHE
void bfin_icache_init(struct cplb_entry *icplb_tbl)
{
bfin_cache_init(icplb_tbl, ICPLB_ADDR0, ICPLB_DATA0, IMEM_CONTROL,
(IMC | ENICPLB));
}
#endif
#ifdef CONFIG_BFIN_DCACHE
void bfin_dcache_init(struct cplb_entry *dcplb_tbl)
{
/*
* Anomaly notes:
* 05000287 - We implement workaround #2 - Change the DMEM_CONTROL
* register, so that the port preferences for DAG0 and DAG1 are set
* to port B
*/
bfin_cache_init(dcplb_tbl, DCPLB_ADDR0, DCPLB_DATA0, DMEM_CONTROL,
(DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0)));
}
#endif
#endif