9c2e7e40bf
General errors, such as timeouts during probe do not need to be sent to the console, so move them down to be included if the debug is enabled. Such errors include: s3c2440-sdi s3c2440-sdi: s3cmci_request: no medium present Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
1461 lines
35 KiB
C
1461 lines
35 KiB
C
/*
|
|
* linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
|
|
*
|
|
* Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/dma.h>
|
|
|
|
#include <mach/regs-sdi.h>
|
|
#include <mach/regs-gpio.h>
|
|
|
|
#include <asm/plat-s3c24xx/mci.h>
|
|
|
|
#include "s3cmci.h"
|
|
|
|
#define DRIVER_NAME "s3c-mci"
|
|
|
|
enum dbg_channels {
|
|
dbg_err = (1 << 0),
|
|
dbg_debug = (1 << 1),
|
|
dbg_info = (1 << 2),
|
|
dbg_irq = (1 << 3),
|
|
dbg_sg = (1 << 4),
|
|
dbg_dma = (1 << 5),
|
|
dbg_pio = (1 << 6),
|
|
dbg_fail = (1 << 7),
|
|
dbg_conf = (1 << 8),
|
|
};
|
|
|
|
static const int dbgmap_err = dbg_fail;
|
|
static const int dbgmap_info = dbg_info | dbg_conf;
|
|
static const int dbgmap_debug = dbg_err | dbg_debug;
|
|
|
|
#define dbg(host, channels, args...) \
|
|
do { \
|
|
if (dbgmap_err & channels) \
|
|
dev_err(&host->pdev->dev, args); \
|
|
else if (dbgmap_info & channels) \
|
|
dev_info(&host->pdev->dev, args); \
|
|
else if (dbgmap_debug & channels) \
|
|
dev_dbg(&host->pdev->dev, args); \
|
|
} while (0)
|
|
|
|
#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
|
|
|
|
static struct s3c2410_dma_client s3cmci_dma_client = {
|
|
.name = "s3c-mci",
|
|
};
|
|
|
|
static void finalize_request(struct s3cmci_host *host);
|
|
static void s3cmci_send_request(struct mmc_host *mmc);
|
|
static void s3cmci_reset(struct s3cmci_host *host);
|
|
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
|
|
static void dbg_dumpregs(struct s3cmci_host *host, char *prefix)
|
|
{
|
|
u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize;
|
|
u32 datcon, datcnt, datsta, fsta, imask;
|
|
|
|
con = readl(host->base + S3C2410_SDICON);
|
|
pre = readl(host->base + S3C2410_SDIPRE);
|
|
cmdarg = readl(host->base + S3C2410_SDICMDARG);
|
|
cmdcon = readl(host->base + S3C2410_SDICMDCON);
|
|
cmdsta = readl(host->base + S3C2410_SDICMDSTAT);
|
|
r0 = readl(host->base + S3C2410_SDIRSP0);
|
|
r1 = readl(host->base + S3C2410_SDIRSP1);
|
|
r2 = readl(host->base + S3C2410_SDIRSP2);
|
|
r3 = readl(host->base + S3C2410_SDIRSP3);
|
|
timer = readl(host->base + S3C2410_SDITIMER);
|
|
bsize = readl(host->base + S3C2410_SDIBSIZE);
|
|
datcon = readl(host->base + S3C2410_SDIDCON);
|
|
datcnt = readl(host->base + S3C2410_SDIDCNT);
|
|
datsta = readl(host->base + S3C2410_SDIDSTA);
|
|
fsta = readl(host->base + S3C2410_SDIFSTA);
|
|
imask = readl(host->base + host->sdiimsk);
|
|
|
|
dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n",
|
|
prefix, con, pre, timer);
|
|
|
|
dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n",
|
|
prefix, cmdcon, cmdarg, cmdsta);
|
|
|
|
dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]"
|
|
" DSTA:[%08x] DCNT:[%08x]\n",
|
|
prefix, datcon, fsta, datsta, datcnt);
|
|
|
|
dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]"
|
|
" R2:[%08x] R3:[%08x]\n",
|
|
prefix, r0, r1, r2, r3);
|
|
}
|
|
|
|
static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
|
|
int stop)
|
|
{
|
|
snprintf(host->dbgmsg_cmd, 300,
|
|
"#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u",
|
|
host->ccnt, (stop ? " (STOP)" : ""),
|
|
cmd->opcode, cmd->arg, cmd->flags, cmd->retries);
|
|
|
|
if (cmd->data) {
|
|
snprintf(host->dbgmsg_dat, 300,
|
|
"#%u bsize:%u blocks:%u bytes:%u",
|
|
host->dcnt, cmd->data->blksz,
|
|
cmd->data->blocks,
|
|
cmd->data->blocks * cmd->data->blksz);
|
|
} else {
|
|
host->dbgmsg_dat[0] = '\0';
|
|
}
|
|
}
|
|
|
|
static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd,
|
|
int fail)
|
|
{
|
|
unsigned int dbglvl = fail ? dbg_fail : dbg_debug;
|
|
|
|
if (!cmd)
|
|
return;
|
|
|
|
if (cmd->error == 0) {
|
|
dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n",
|
|
host->dbgmsg_cmd, cmd->resp[0]);
|
|
} else {
|
|
dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n",
|
|
cmd->error, host->dbgmsg_cmd, host->status);
|
|
}
|
|
|
|
if (!cmd->data)
|
|
return;
|
|
|
|
if (cmd->data->error == 0) {
|
|
dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat);
|
|
} else {
|
|
dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n",
|
|
cmd->data->error, host->dbgmsg_dat,
|
|
readl(host->base + S3C2410_SDIDCNT));
|
|
}
|
|
}
|
|
#else
|
|
static void dbg_dumpcmd(struct s3cmci_host *host,
|
|
struct mmc_command *cmd, int fail) { }
|
|
|
|
static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
|
|
int stop) { }
|
|
|
|
static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { }
|
|
|
|
#endif /* CONFIG_MMC_DEBUG */
|
|
|
|
static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
|
|
{
|
|
u32 newmask;
|
|
|
|
newmask = readl(host->base + host->sdiimsk);
|
|
newmask |= imask;
|
|
|
|
writel(newmask, host->base + host->sdiimsk);
|
|
|
|
return newmask;
|
|
}
|
|
|
|
static inline u32 disable_imask(struct s3cmci_host *host, u32 imask)
|
|
{
|
|
u32 newmask;
|
|
|
|
newmask = readl(host->base + host->sdiimsk);
|
|
newmask &= ~imask;
|
|
|
|
writel(newmask, host->base + host->sdiimsk);
|
|
|
|
return newmask;
|
|
}
|
|
|
|
static inline void clear_imask(struct s3cmci_host *host)
|
|
{
|
|
writel(0, host->base + host->sdiimsk);
|
|
}
|
|
|
|
static inline int get_data_buffer(struct s3cmci_host *host,
|
|
u32 *words, u32 **pointer)
|
|
{
|
|
struct scatterlist *sg;
|
|
|
|
if (host->pio_active == XFER_NONE)
|
|
return -EINVAL;
|
|
|
|
if ((!host->mrq) || (!host->mrq->data))
|
|
return -EINVAL;
|
|
|
|
if (host->pio_sgptr >= host->mrq->data->sg_len) {
|
|
dbg(host, dbg_debug, "no more buffers (%i/%i)\n",
|
|
host->pio_sgptr, host->mrq->data->sg_len);
|
|
return -EBUSY;
|
|
}
|
|
sg = &host->mrq->data->sg[host->pio_sgptr];
|
|
|
|
*words = sg->length >> 2;
|
|
*pointer = sg_virt(sg);
|
|
|
|
host->pio_sgptr++;
|
|
|
|
dbg(host, dbg_sg, "new buffer (%i/%i)\n",
|
|
host->pio_sgptr, host->mrq->data->sg_len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline u32 fifo_count(struct s3cmci_host *host)
|
|
{
|
|
u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
|
|
|
|
fifostat &= S3C2410_SDIFSTA_COUNTMASK;
|
|
return fifostat >> 2;
|
|
}
|
|
|
|
static inline u32 fifo_free(struct s3cmci_host *host)
|
|
{
|
|
u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
|
|
|
|
fifostat &= S3C2410_SDIFSTA_COUNTMASK;
|
|
return (63 - fifostat) >> 2;
|
|
}
|
|
|
|
static void do_pio_read(struct s3cmci_host *host)
|
|
{
|
|
int res;
|
|
u32 fifo;
|
|
void __iomem *from_ptr;
|
|
|
|
/* write real prescaler to host, it might be set slow to fix */
|
|
writel(host->prescaler, host->base + S3C2410_SDIPRE);
|
|
|
|
from_ptr = host->base + host->sdidata;
|
|
|
|
while ((fifo = fifo_count(host))) {
|
|
if (!host->pio_words) {
|
|
res = get_data_buffer(host, &host->pio_words,
|
|
&host->pio_ptr);
|
|
if (res) {
|
|
host->pio_active = XFER_NONE;
|
|
host->complete_what = COMPLETION_FINALIZE;
|
|
|
|
dbg(host, dbg_pio, "pio_read(): "
|
|
"complete (no more data).\n");
|
|
return;
|
|
}
|
|
|
|
dbg(host, dbg_pio,
|
|
"pio_read(): new target: [%i]@[%p]\n",
|
|
host->pio_words, host->pio_ptr);
|
|
}
|
|
|
|
dbg(host, dbg_pio,
|
|
"pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n",
|
|
fifo, host->pio_words,
|
|
readl(host->base + S3C2410_SDIDCNT));
|
|
|
|
if (fifo > host->pio_words)
|
|
fifo = host->pio_words;
|
|
|
|
host->pio_words -= fifo;
|
|
host->pio_count += fifo;
|
|
|
|
while (fifo--)
|
|
*(host->pio_ptr++) = readl(from_ptr);
|
|
}
|
|
|
|
if (!host->pio_words) {
|
|
res = get_data_buffer(host, &host->pio_words, &host->pio_ptr);
|
|
if (res) {
|
|
dbg(host, dbg_pio,
|
|
"pio_read(): complete (no more buffers).\n");
|
|
host->pio_active = XFER_NONE;
|
|
host->complete_what = COMPLETION_FINALIZE;
|
|
|
|
return;
|
|
}
|
|
}
|
|
|
|
enable_imask(host,
|
|
S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST);
|
|
}
|
|
|
|
static void do_pio_write(struct s3cmci_host *host)
|
|
{
|
|
void __iomem *to_ptr;
|
|
int res;
|
|
u32 fifo;
|
|
|
|
to_ptr = host->base + host->sdidata;
|
|
|
|
while ((fifo = fifo_free(host))) {
|
|
if (!host->pio_words) {
|
|
res = get_data_buffer(host, &host->pio_words,
|
|
&host->pio_ptr);
|
|
if (res) {
|
|
dbg(host, dbg_pio,
|
|
"pio_write(): complete (no more data).\n");
|
|
host->pio_active = XFER_NONE;
|
|
|
|
return;
|
|
}
|
|
|
|
dbg(host, dbg_pio,
|
|
"pio_write(): new source: [%i]@[%p]\n",
|
|
host->pio_words, host->pio_ptr);
|
|
|
|
}
|
|
|
|
if (fifo > host->pio_words)
|
|
fifo = host->pio_words;
|
|
|
|
host->pio_words -= fifo;
|
|
host->pio_count += fifo;
|
|
|
|
while (fifo--)
|
|
writel(*(host->pio_ptr++), to_ptr);
|
|
}
|
|
|
|
enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
|
|
}
|
|
|
|
static void pio_tasklet(unsigned long data)
|
|
{
|
|
struct s3cmci_host *host = (struct s3cmci_host *) data;
|
|
|
|
|
|
disable_irq(host->irq);
|
|
|
|
if (host->pio_active == XFER_WRITE)
|
|
do_pio_write(host);
|
|
|
|
if (host->pio_active == XFER_READ)
|
|
do_pio_read(host);
|
|
|
|
if (host->complete_what == COMPLETION_FINALIZE) {
|
|
clear_imask(host);
|
|
if (host->pio_active != XFER_NONE) {
|
|
dbg(host, dbg_err, "unfinished %s "
|
|
"- pio_count:[%u] pio_words:[%u]\n",
|
|
(host->pio_active == XFER_READ) ? "read" : "write",
|
|
host->pio_count, host->pio_words);
|
|
|
|
if (host->mrq->data)
|
|
host->mrq->data->error = -EINVAL;
|
|
}
|
|
|
|
finalize_request(host);
|
|
} else
|
|
enable_irq(host->irq);
|
|
}
|
|
|
|
/*
|
|
* ISR for SDI Interface IRQ
|
|
* Communication between driver and ISR works as follows:
|
|
* host->mrq points to current request
|
|
* host->complete_what Indicates when the request is considered done
|
|
* COMPLETION_CMDSENT when the command was sent
|
|
* COMPLETION_RSPFIN when a response was received
|
|
* COMPLETION_XFERFINISH when the data transfer is finished
|
|
* COMPLETION_XFERFINISH_RSPFIN both of the above.
|
|
* host->complete_request is the completion-object the driver waits for
|
|
*
|
|
* 1) Driver sets up host->mrq and host->complete_what
|
|
* 2) Driver prepares the transfer
|
|
* 3) Driver enables interrupts
|
|
* 4) Driver starts transfer
|
|
* 5) Driver waits for host->complete_rquest
|
|
* 6) ISR checks for request status (errors and success)
|
|
* 6) ISR sets host->mrq->cmd->error and host->mrq->data->error
|
|
* 7) ISR completes host->complete_request
|
|
* 8) ISR disables interrupts
|
|
* 9) Driver wakes up and takes care of the request
|
|
*
|
|
* Note: "->error"-fields are expected to be set to 0 before the request
|
|
* was issued by mmc.c - therefore they are only set, when an error
|
|
* contition comes up
|
|
*/
|
|
|
|
static irqreturn_t s3cmci_irq(int irq, void *dev_id)
|
|
{
|
|
struct s3cmci_host *host = dev_id;
|
|
struct mmc_command *cmd;
|
|
u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
|
|
u32 mci_cclear, mci_dclear;
|
|
unsigned long iflags;
|
|
|
|
spin_lock_irqsave(&host->complete_lock, iflags);
|
|
|
|
mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
|
|
mci_dsta = readl(host->base + S3C2410_SDIDSTA);
|
|
mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
|
|
mci_fsta = readl(host->base + S3C2410_SDIFSTA);
|
|
mci_imsk = readl(host->base + host->sdiimsk);
|
|
mci_cclear = 0;
|
|
mci_dclear = 0;
|
|
|
|
if ((host->complete_what == COMPLETION_NONE) ||
|
|
(host->complete_what == COMPLETION_FINALIZE)) {
|
|
host->status = "nothing to complete";
|
|
clear_imask(host);
|
|
goto irq_out;
|
|
}
|
|
|
|
if (!host->mrq) {
|
|
host->status = "no active mrq";
|
|
clear_imask(host);
|
|
goto irq_out;
|
|
}
|
|
|
|
cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd;
|
|
|
|
if (!cmd) {
|
|
host->status = "no active cmd";
|
|
clear_imask(host);
|
|
goto irq_out;
|
|
}
|
|
|
|
if (!host->dodma) {
|
|
if ((host->pio_active == XFER_WRITE) &&
|
|
(mci_fsta & S3C2410_SDIFSTA_TFDET)) {
|
|
|
|
disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
|
|
tasklet_schedule(&host->pio_tasklet);
|
|
host->status = "pio tx";
|
|
}
|
|
|
|
if ((host->pio_active == XFER_READ) &&
|
|
(mci_fsta & S3C2410_SDIFSTA_RFDET)) {
|
|
|
|
disable_imask(host,
|
|
S3C2410_SDIIMSK_RXFIFOHALF |
|
|
S3C2410_SDIIMSK_RXFIFOLAST);
|
|
|
|
tasklet_schedule(&host->pio_tasklet);
|
|
host->status = "pio rx";
|
|
}
|
|
}
|
|
|
|
if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
|
|
dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n");
|
|
cmd->error = -ETIMEDOUT;
|
|
host->status = "error: command timeout";
|
|
goto fail_transfer;
|
|
}
|
|
|
|
if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) {
|
|
if (host->complete_what == COMPLETION_CMDSENT) {
|
|
host->status = "ok: command sent";
|
|
goto close_transfer;
|
|
}
|
|
|
|
mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT;
|
|
}
|
|
|
|
if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) {
|
|
if (cmd->flags & MMC_RSP_CRC) {
|
|
if (host->mrq->cmd->flags & MMC_RSP_136) {
|
|
dbg(host, dbg_irq,
|
|
"fixup: ignore CRC fail with long rsp\n");
|
|
} else {
|
|
/* note, we used to fail the transfer
|
|
* here, but it seems that this is just
|
|
* the hardware getting it wrong.
|
|
*
|
|
* cmd->error = -EILSEQ;
|
|
* host->status = "error: bad command crc";
|
|
* goto fail_transfer;
|
|
*/
|
|
}
|
|
}
|
|
|
|
mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL;
|
|
}
|
|
|
|
if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) {
|
|
if (host->complete_what == COMPLETION_RSPFIN) {
|
|
host->status = "ok: command response received";
|
|
goto close_transfer;
|
|
}
|
|
|
|
if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
|
|
host->complete_what = COMPLETION_XFERFINISH;
|
|
|
|
mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN;
|
|
}
|
|
|
|
/* errors handled after this point are only relevant
|
|
when a data transfer is in progress */
|
|
|
|
if (!cmd->data)
|
|
goto clear_status_bits;
|
|
|
|
/* Check for FIFO failure */
|
|
if (host->is2440) {
|
|
if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) {
|
|
dbg(host, dbg_err, "FIFO failure\n");
|
|
host->mrq->data->error = -EILSEQ;
|
|
host->status = "error: 2440 fifo failure";
|
|
goto fail_transfer;
|
|
}
|
|
} else {
|
|
if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) {
|
|
dbg(host, dbg_err, "FIFO failure\n");
|
|
cmd->data->error = -EILSEQ;
|
|
host->status = "error: fifo failure";
|
|
goto fail_transfer;
|
|
}
|
|
}
|
|
|
|
if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) {
|
|
dbg(host, dbg_err, "bad data crc (outgoing)\n");
|
|
cmd->data->error = -EILSEQ;
|
|
host->status = "error: bad data crc (outgoing)";
|
|
goto fail_transfer;
|
|
}
|
|
|
|
if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) {
|
|
dbg(host, dbg_err, "bad data crc (incoming)\n");
|
|
cmd->data->error = -EILSEQ;
|
|
host->status = "error: bad data crc (incoming)";
|
|
goto fail_transfer;
|
|
}
|
|
|
|
if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) {
|
|
dbg(host, dbg_err, "data timeout\n");
|
|
cmd->data->error = -ETIMEDOUT;
|
|
host->status = "error: data timeout";
|
|
goto fail_transfer;
|
|
}
|
|
|
|
if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) {
|
|
if (host->complete_what == COMPLETION_XFERFINISH) {
|
|
host->status = "ok: data transfer completed";
|
|
goto close_transfer;
|
|
}
|
|
|
|
if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
|
|
host->complete_what = COMPLETION_RSPFIN;
|
|
|
|
mci_dclear |= S3C2410_SDIDSTA_XFERFINISH;
|
|
}
|
|
|
|
clear_status_bits:
|
|
writel(mci_cclear, host->base + S3C2410_SDICMDSTAT);
|
|
writel(mci_dclear, host->base + S3C2410_SDIDSTA);
|
|
|
|
goto irq_out;
|
|
|
|
fail_transfer:
|
|
host->pio_active = XFER_NONE;
|
|
|
|
close_transfer:
|
|
host->complete_what = COMPLETION_FINALIZE;
|
|
|
|
clear_imask(host);
|
|
tasklet_schedule(&host->pio_tasklet);
|
|
|
|
goto irq_out;
|
|
|
|
irq_out:
|
|
dbg(host, dbg_irq,
|
|
"csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n",
|
|
mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status);
|
|
|
|
spin_unlock_irqrestore(&host->complete_lock, iflags);
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
/*
|
|
* ISR for the CardDetect Pin
|
|
*/
|
|
|
|
static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
|
|
{
|
|
struct s3cmci_host *host = (struct s3cmci_host *)dev_id;
|
|
|
|
dbg(host, dbg_irq, "card detect\n");
|
|
|
|
mmc_detect_change(host->mmc, msecs_to_jiffies(500));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch,
|
|
void *buf_id, int size,
|
|
enum s3c2410_dma_buffresult result)
|
|
{
|
|
struct s3cmci_host *host = buf_id;
|
|
unsigned long iflags;
|
|
u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt;
|
|
|
|
mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
|
|
mci_dsta = readl(host->base + S3C2410_SDIDSTA);
|
|
mci_fsta = readl(host->base + S3C2410_SDIFSTA);
|
|
mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
|
|
|
|
BUG_ON(!host->mrq);
|
|
BUG_ON(!host->mrq->data);
|
|
BUG_ON(!host->dmatogo);
|
|
|
|
spin_lock_irqsave(&host->complete_lock, iflags);
|
|
|
|
if (result != S3C2410_RES_OK) {
|
|
dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x "
|
|
"fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n",
|
|
mci_csta, mci_dsta, mci_fsta,
|
|
mci_dcnt, result, host->dmatogo);
|
|
|
|
goto fail_request;
|
|
}
|
|
|
|
host->dmatogo--;
|
|
if (host->dmatogo) {
|
|
dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] "
|
|
"DCNT:[%08x] toGo:%u\n",
|
|
size, mci_dsta, mci_dcnt, host->dmatogo);
|
|
|
|
goto out;
|
|
}
|
|
|
|
dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n",
|
|
size, mci_dsta, mci_dcnt);
|
|
|
|
host->complete_what = COMPLETION_FINALIZE;
|
|
|
|
out:
|
|
tasklet_schedule(&host->pio_tasklet);
|
|
spin_unlock_irqrestore(&host->complete_lock, iflags);
|
|
return;
|
|
|
|
fail_request:
|
|
host->mrq->data->error = -EINVAL;
|
|
host->complete_what = COMPLETION_FINALIZE;
|
|
writel(0, host->base + host->sdiimsk);
|
|
goto out;
|
|
|
|
}
|
|
|
|
static void finalize_request(struct s3cmci_host *host)
|
|
{
|
|
struct mmc_request *mrq = host->mrq;
|
|
struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
|
|
int debug_as_failure = 0;
|
|
|
|
if (host->complete_what != COMPLETION_FINALIZE)
|
|
return;
|
|
|
|
if (!mrq)
|
|
return;
|
|
|
|
if (cmd->data && (cmd->error == 0) &&
|
|
(cmd->data->error == 0)) {
|
|
if (host->dodma && (!host->dma_complete)) {
|
|
dbg(host, dbg_dma, "DMA Missing!\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Read response from controller. */
|
|
cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0);
|
|
cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1);
|
|
cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2);
|
|
cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3);
|
|
|
|
writel(host->prescaler, host->base + S3C2410_SDIPRE);
|
|
|
|
if (cmd->error)
|
|
debug_as_failure = 1;
|
|
|
|
if (cmd->data && cmd->data->error)
|
|
debug_as_failure = 1;
|
|
|
|
dbg_dumpcmd(host, cmd, debug_as_failure);
|
|
|
|
/* Cleanup controller */
|
|
writel(0, host->base + S3C2410_SDICMDARG);
|
|
writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
|
|
writel(0, host->base + S3C2410_SDICMDCON);
|
|
writel(0, host->base + host->sdiimsk);
|
|
|
|
if (cmd->data && cmd->error)
|
|
cmd->data->error = cmd->error;
|
|
|
|
if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) {
|
|
host->cmd_is_stop = 1;
|
|
s3cmci_send_request(host->mmc);
|
|
return;
|
|
}
|
|
|
|
/* If we have no data transfer we are finished here */
|
|
if (!mrq->data)
|
|
goto request_done;
|
|
|
|
/* Calulate the amout of bytes transfer if there was no error */
|
|
if (mrq->data->error == 0) {
|
|
mrq->data->bytes_xfered =
|
|
(mrq->data->blocks * mrq->data->blksz);
|
|
} else {
|
|
mrq->data->bytes_xfered = 0;
|
|
}
|
|
|
|
/* If we had an error while transfering data we flush the
|
|
* DMA channel and the fifo to clear out any garbage. */
|
|
if (mrq->data->error != 0) {
|
|
if (host->dodma)
|
|
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
|
|
|
|
if (host->is2440) {
|
|
/* Clear failure register and reset fifo. */
|
|
writel(S3C2440_SDIFSTA_FIFORESET |
|
|
S3C2440_SDIFSTA_FIFOFAIL,
|
|
host->base + S3C2410_SDIFSTA);
|
|
} else {
|
|
u32 mci_con;
|
|
|
|
/* reset fifo */
|
|
mci_con = readl(host->base + S3C2410_SDICON);
|
|
mci_con |= S3C2410_SDICON_FIFORESET;
|
|
|
|
writel(mci_con, host->base + S3C2410_SDICON);
|
|
}
|
|
}
|
|
|
|
request_done:
|
|
host->complete_what = COMPLETION_NONE;
|
|
host->mrq = NULL;
|
|
mmc_request_done(host->mmc, mrq);
|
|
}
|
|
|
|
static void s3cmci_dma_setup(struct s3cmci_host *host,
|
|
enum s3c2410_dmasrc source)
|
|
{
|
|
static enum s3c2410_dmasrc last_source = -1;
|
|
static int setup_ok;
|
|
|
|
if (last_source == source)
|
|
return;
|
|
|
|
last_source = source;
|
|
|
|
s3c2410_dma_devconfig(host->dma, source, 3,
|
|
host->mem->start + host->sdidata);
|
|
|
|
if (!setup_ok) {
|
|
s3c2410_dma_config(host->dma, 4,
|
|
(S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI));
|
|
s3c2410_dma_set_buffdone_fn(host->dma,
|
|
s3cmci_dma_done_callback);
|
|
s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
|
|
setup_ok = 1;
|
|
}
|
|
}
|
|
|
|
static void s3cmci_send_command(struct s3cmci_host *host,
|
|
struct mmc_command *cmd)
|
|
{
|
|
u32 ccon, imsk;
|
|
|
|
imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT |
|
|
S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT |
|
|
S3C2410_SDIIMSK_RESPONSECRC;
|
|
|
|
enable_imask(host, imsk);
|
|
|
|
if (cmd->data)
|
|
host->complete_what = COMPLETION_XFERFINISH_RSPFIN;
|
|
else if (cmd->flags & MMC_RSP_PRESENT)
|
|
host->complete_what = COMPLETION_RSPFIN;
|
|
else
|
|
host->complete_what = COMPLETION_CMDSENT;
|
|
|
|
writel(cmd->arg, host->base + S3C2410_SDICMDARG);
|
|
|
|
ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX;
|
|
ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART;
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT)
|
|
ccon |= S3C2410_SDICMDCON_WAITRSP;
|
|
|
|
if (cmd->flags & MMC_RSP_136)
|
|
ccon |= S3C2410_SDICMDCON_LONGRSP;
|
|
|
|
writel(ccon, host->base + S3C2410_SDICMDCON);
|
|
}
|
|
|
|
static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
|
|
{
|
|
u32 dcon, imsk, stoptries = 3;
|
|
|
|
/* write DCON register */
|
|
|
|
if (!data) {
|
|
writel(0, host->base + S3C2410_SDIDCON);
|
|
return 0;
|
|
}
|
|
|
|
if ((data->blksz & 3) != 0) {
|
|
/* We cannot deal with unaligned blocks with more than
|
|
* one block being transfered. */
|
|
|
|
if (data->blocks > 1)
|
|
return -EINVAL;
|
|
|
|
/* No support yet for non-word block transfers. */
|
|
return -EINVAL;
|
|
}
|
|
|
|
while (readl(host->base + S3C2410_SDIDSTA) &
|
|
(S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) {
|
|
|
|
dbg(host, dbg_err,
|
|
"mci_setup_data() transfer stillin progress.\n");
|
|
|
|
writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
|
|
s3cmci_reset(host);
|
|
|
|
if ((stoptries--) == 0) {
|
|
dbg_dumpregs(host, "DRF");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
|
|
|
|
if (host->dodma)
|
|
dcon |= S3C2410_SDIDCON_DMAEN;
|
|
|
|
if (host->bus_width == MMC_BUS_WIDTH_4)
|
|
dcon |= S3C2410_SDIDCON_WIDEBUS;
|
|
|
|
if (!(data->flags & MMC_DATA_STREAM))
|
|
dcon |= S3C2410_SDIDCON_BLOCKMODE;
|
|
|
|
if (data->flags & MMC_DATA_WRITE) {
|
|
dcon |= S3C2410_SDIDCON_TXAFTERRESP;
|
|
dcon |= S3C2410_SDIDCON_XFER_TXSTART;
|
|
}
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
dcon |= S3C2410_SDIDCON_RXAFTERCMD;
|
|
dcon |= S3C2410_SDIDCON_XFER_RXSTART;
|
|
}
|
|
|
|
if (host->is2440) {
|
|
dcon |= S3C2440_SDIDCON_DS_WORD;
|
|
dcon |= S3C2440_SDIDCON_DATSTART;
|
|
}
|
|
|
|
writel(dcon, host->base + S3C2410_SDIDCON);
|
|
|
|
/* write BSIZE register */
|
|
|
|
writel(data->blksz, host->base + S3C2410_SDIBSIZE);
|
|
|
|
/* add to IMASK register */
|
|
imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC |
|
|
S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH;
|
|
|
|
enable_imask(host, imsk);
|
|
|
|
/* write TIMER register */
|
|
|
|
if (host->is2440) {
|
|
writel(0x007FFFFF, host->base + S3C2410_SDITIMER);
|
|
} else {
|
|
writel(0x0000FFFF, host->base + S3C2410_SDITIMER);
|
|
|
|
/* FIX: set slow clock to prevent timeouts on read */
|
|
if (data->flags & MMC_DATA_READ)
|
|
writel(0xFF, host->base + S3C2410_SDIPRE);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
|
|
|
|
static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
|
|
{
|
|
int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
|
|
|
|
BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
|
|
|
|
host->pio_sgptr = 0;
|
|
host->pio_words = 0;
|
|
host->pio_count = 0;
|
|
host->pio_active = rw ? XFER_WRITE : XFER_READ;
|
|
|
|
if (rw) {
|
|
do_pio_write(host);
|
|
enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
|
|
} else {
|
|
enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF
|
|
| S3C2410_SDIIMSK_RXFIFOLAST);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
|
|
{
|
|
int dma_len, i;
|
|
int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
|
|
|
|
BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
|
|
|
|
s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW);
|
|
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
|
|
|
|
dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
|
|
(rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
|
|
|
|
if (dma_len == 0)
|
|
return -ENOMEM;
|
|
|
|
host->dma_complete = 0;
|
|
host->dmatogo = dma_len;
|
|
|
|
for (i = 0; i < dma_len; i++) {
|
|
int res;
|
|
|
|
dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i,
|
|
sg_dma_address(&data->sg[i]),
|
|
sg_dma_len(&data->sg[i]));
|
|
|
|
res = s3c2410_dma_enqueue(host->dma, (void *) host,
|
|
sg_dma_address(&data->sg[i]),
|
|
sg_dma_len(&data->sg[i]));
|
|
|
|
if (res) {
|
|
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
|
|
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void s3cmci_send_request(struct mmc_host *mmc)
|
|
{
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
struct mmc_request *mrq = host->mrq;
|
|
struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
|
|
|
|
host->ccnt++;
|
|
prepare_dbgmsg(host, cmd, host->cmd_is_stop);
|
|
|
|
/* Clear command, data and fifo status registers
|
|
Fifo clear only necessary on 2440, but doesn't hurt on 2410
|
|
*/
|
|
writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT);
|
|
writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA);
|
|
writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA);
|
|
|
|
if (cmd->data) {
|
|
int res = s3cmci_setup_data(host, cmd->data);
|
|
|
|
host->dcnt++;
|
|
|
|
if (res) {
|
|
dbg(host, dbg_err, "setup data error %d\n", res);
|
|
cmd->error = res;
|
|
cmd->data->error = res;
|
|
|
|
mmc_request_done(mmc, mrq);
|
|
return;
|
|
}
|
|
|
|
if (host->dodma)
|
|
res = s3cmci_prepare_dma(host, cmd->data);
|
|
else
|
|
res = s3cmci_prepare_pio(host, cmd->data);
|
|
|
|
if (res) {
|
|
dbg(host, dbg_err, "data prepare error %d\n", res);
|
|
cmd->error = res;
|
|
cmd->data->error = res;
|
|
|
|
mmc_request_done(mmc, mrq);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Send command */
|
|
s3cmci_send_command(host, cmd);
|
|
|
|
/* Enable Interrupt */
|
|
enable_irq(host->irq);
|
|
}
|
|
|
|
static int s3cmci_card_present(struct mmc_host *mmc)
|
|
{
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
struct s3c24xx_mci_pdata *pdata = host->pdata;
|
|
int ret;
|
|
|
|
if (pdata->gpio_detect == 0)
|
|
return -ENOSYS;
|
|
|
|
ret = s3c2410_gpio_getpin(pdata->gpio_detect) ? 0 : 1;
|
|
return ret ^ pdata->detect_invert;
|
|
}
|
|
|
|
static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
|
|
host->status = "mmc request";
|
|
host->cmd_is_stop = 0;
|
|
host->mrq = mrq;
|
|
|
|
if (s3cmci_card_present(mmc) == 0) {
|
|
dbg(host, dbg_err, "%s: no medium present\n", __func__);
|
|
host->mrq->cmd->error = -ENOMEDIUM;
|
|
mmc_request_done(mmc, mrq);
|
|
} else
|
|
s3cmci_send_request(mmc);
|
|
}
|
|
|
|
static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
u32 mci_psc, mci_con;
|
|
|
|
/* Set the power state */
|
|
|
|
mci_con = readl(host->base + S3C2410_SDICON);
|
|
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_ON:
|
|
case MMC_POWER_UP:
|
|
s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK);
|
|
s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD);
|
|
s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0);
|
|
s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
|
|
s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2);
|
|
s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3);
|
|
|
|
if (host->pdata->set_power)
|
|
host->pdata->set_power(ios->power_mode, ios->vdd);
|
|
|
|
if (!host->is2440)
|
|
mci_con |= S3C2410_SDICON_FIFORESET;
|
|
|
|
break;
|
|
|
|
case MMC_POWER_OFF:
|
|
default:
|
|
s3c2410_gpio_setpin(S3C2410_GPE5, 0);
|
|
s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
|
|
|
|
if (host->is2440)
|
|
mci_con |= S3C2440_SDICON_SDRESET;
|
|
|
|
if (host->pdata->set_power)
|
|
host->pdata->set_power(ios->power_mode, ios->vdd);
|
|
|
|
break;
|
|
}
|
|
|
|
/* Set clock */
|
|
for (mci_psc = 0; mci_psc < 255; mci_psc++) {
|
|
host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1));
|
|
|
|
if (host->real_rate <= ios->clock)
|
|
break;
|
|
}
|
|
|
|
if (mci_psc > 255)
|
|
mci_psc = 255;
|
|
|
|
host->prescaler = mci_psc;
|
|
writel(host->prescaler, host->base + S3C2410_SDIPRE);
|
|
|
|
/* If requested clock is 0, real_rate will be 0, too */
|
|
if (ios->clock == 0)
|
|
host->real_rate = 0;
|
|
|
|
/* Set CLOCK_ENABLE */
|
|
if (ios->clock)
|
|
mci_con |= S3C2410_SDICON_CLOCKTYPE;
|
|
else
|
|
mci_con &= ~S3C2410_SDICON_CLOCKTYPE;
|
|
|
|
writel(mci_con, host->base + S3C2410_SDICON);
|
|
|
|
if ((ios->power_mode == MMC_POWER_ON) ||
|
|
(ios->power_mode == MMC_POWER_UP)) {
|
|
dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n",
|
|
host->real_rate/1000, ios->clock/1000);
|
|
} else {
|
|
dbg(host, dbg_conf, "powered down.\n");
|
|
}
|
|
|
|
host->bus_width = ios->bus_width;
|
|
}
|
|
|
|
static void s3cmci_reset(struct s3cmci_host *host)
|
|
{
|
|
u32 con = readl(host->base + S3C2410_SDICON);
|
|
|
|
con |= S3C2440_SDICON_SDRESET;
|
|
writel(con, host->base + S3C2410_SDICON);
|
|
}
|
|
|
|
static int s3cmci_get_ro(struct mmc_host *mmc)
|
|
{
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
struct s3c24xx_mci_pdata *pdata = host->pdata;
|
|
int ret;
|
|
|
|
if (pdata->gpio_wprotect == 0)
|
|
return 0;
|
|
|
|
ret = s3c2410_gpio_getpin(pdata->gpio_wprotect);
|
|
|
|
if (pdata->wprotect_invert)
|
|
ret = !ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct mmc_host_ops s3cmci_ops = {
|
|
.request = s3cmci_request,
|
|
.set_ios = s3cmci_set_ios,
|
|
.get_ro = s3cmci_get_ro,
|
|
.get_cd = s3cmci_card_present,
|
|
};
|
|
|
|
static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
|
|
/* This is currently here to avoid a number of if (host->pdata)
|
|
* checks. Any zero fields to ensure reaonable defaults are picked. */
|
|
};
|
|
|
|
static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
|
|
{
|
|
struct s3cmci_host *host;
|
|
struct mmc_host *mmc;
|
|
int ret;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
|
|
if (!mmc) {
|
|
ret = -ENOMEM;
|
|
goto probe_out;
|
|
}
|
|
|
|
host = mmc_priv(mmc);
|
|
host->mmc = mmc;
|
|
host->pdev = pdev;
|
|
host->is2440 = is2440;
|
|
|
|
host->pdata = pdev->dev.platform_data;
|
|
if (!host->pdata) {
|
|
pdev->dev.platform_data = &s3cmci_def_pdata;
|
|
host->pdata = &s3cmci_def_pdata;
|
|
}
|
|
|
|
spin_lock_init(&host->complete_lock);
|
|
tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
|
|
|
|
if (is2440) {
|
|
host->sdiimsk = S3C2440_SDIIMSK;
|
|
host->sdidata = S3C2440_SDIDATA;
|
|
host->clk_div = 1;
|
|
} else {
|
|
host->sdiimsk = S3C2410_SDIIMSK;
|
|
host->sdidata = S3C2410_SDIDATA;
|
|
host->clk_div = 2;
|
|
}
|
|
|
|
host->dodma = 0;
|
|
host->complete_what = COMPLETION_NONE;
|
|
host->pio_active = XFER_NONE;
|
|
|
|
host->dma = S3CMCI_DMA;
|
|
|
|
host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!host->mem) {
|
|
dev_err(&pdev->dev,
|
|
"failed to get io memory region resouce.\n");
|
|
|
|
ret = -ENOENT;
|
|
goto probe_free_host;
|
|
}
|
|
|
|
host->mem = request_mem_region(host->mem->start,
|
|
RESSIZE(host->mem), pdev->name);
|
|
|
|
if (!host->mem) {
|
|
dev_err(&pdev->dev, "failed to request io memory region.\n");
|
|
ret = -ENOENT;
|
|
goto probe_free_host;
|
|
}
|
|
|
|
host->base = ioremap(host->mem->start, RESSIZE(host->mem));
|
|
if (!host->base) {
|
|
dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
|
|
ret = -EINVAL;
|
|
goto probe_free_mem_region;
|
|
}
|
|
|
|
host->irq = platform_get_irq(pdev, 0);
|
|
if (host->irq == 0) {
|
|
dev_err(&pdev->dev, "failed to get interrupt resouce.\n");
|
|
ret = -EINVAL;
|
|
goto probe_iounmap;
|
|
}
|
|
|
|
if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) {
|
|
dev_err(&pdev->dev, "failed to request mci interrupt.\n");
|
|
ret = -ENOENT;
|
|
goto probe_iounmap;
|
|
}
|
|
|
|
/* We get spurious interrupts even when we have set the IMSK
|
|
* register to ignore everything, so use disable_irq() to make
|
|
* ensure we don't lock the system with un-serviceable requests. */
|
|
|
|
disable_irq(host->irq);
|
|
|
|
host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
|
|
|
|
if (host->irq_cd >= 0) {
|
|
if (request_irq(host->irq_cd, s3cmci_irq_cd,
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
|
|
DRIVER_NAME, host)) {
|
|
dev_err(&pdev->dev, "can't get card detect irq.\n");
|
|
ret = -ENOENT;
|
|
goto probe_free_irq;
|
|
}
|
|
} else {
|
|
dev_warn(&pdev->dev, "host detect has no irq available\n");
|
|
s3c2410_gpio_cfgpin(host->pdata->gpio_detect,
|
|
S3C2410_GPIO_INPUT);
|
|
}
|
|
|
|
if (host->pdata->gpio_wprotect)
|
|
s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect,
|
|
S3C2410_GPIO_INPUT);
|
|
|
|
if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL) < 0) {
|
|
dev_err(&pdev->dev, "unable to get DMA channel.\n");
|
|
ret = -EBUSY;
|
|
goto probe_free_irq_cd;
|
|
}
|
|
|
|
host->clk = clk_get(&pdev->dev, "sdi");
|
|
if (IS_ERR(host->clk)) {
|
|
dev_err(&pdev->dev, "failed to find clock source.\n");
|
|
ret = PTR_ERR(host->clk);
|
|
host->clk = NULL;
|
|
goto probe_free_host;
|
|
}
|
|
|
|
ret = clk_enable(host->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to enable clock source.\n");
|
|
goto clk_free;
|
|
}
|
|
|
|
host->clk_rate = clk_get_rate(host->clk);
|
|
|
|
mmc->ops = &s3cmci_ops;
|
|
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
mmc->caps = MMC_CAP_4_BIT_DATA;
|
|
mmc->f_min = host->clk_rate / (host->clk_div * 256);
|
|
mmc->f_max = host->clk_rate / host->clk_div;
|
|
|
|
if (host->pdata->ocr_avail)
|
|
mmc->ocr_avail = host->pdata->ocr_avail;
|
|
|
|
mmc->max_blk_count = 4095;
|
|
mmc->max_blk_size = 4095;
|
|
mmc->max_req_size = 4095 * 512;
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
|
|
mmc->max_phys_segs = 128;
|
|
mmc->max_hw_segs = 128;
|
|
|
|
dbg(host, dbg_debug,
|
|
"probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n",
|
|
(host->is2440?"2440":""),
|
|
host->base, host->irq, host->irq_cd, host->dma);
|
|
|
|
ret = mmc_add_host(mmc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add mmc host.\n");
|
|
goto free_dmabuf;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, mmc);
|
|
dev_info(&pdev->dev, "initialisation done.\n");
|
|
|
|
return 0;
|
|
|
|
free_dmabuf:
|
|
clk_disable(host->clk);
|
|
|
|
clk_free:
|
|
clk_put(host->clk);
|
|
|
|
probe_free_irq_cd:
|
|
if (host->irq_cd >= 0)
|
|
free_irq(host->irq_cd, host);
|
|
|
|
probe_free_irq:
|
|
free_irq(host->irq, host);
|
|
|
|
probe_iounmap:
|
|
iounmap(host->base);
|
|
|
|
probe_free_mem_region:
|
|
release_mem_region(host->mem->start, RESSIZE(host->mem));
|
|
|
|
probe_free_host:
|
|
mmc_free_host(mmc);
|
|
probe_out:
|
|
return ret;
|
|
}
|
|
|
|
static void s3cmci_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
|
|
if (host->irq_cd >= 0)
|
|
free_irq(host->irq_cd, host);
|
|
|
|
mmc_remove_host(mmc);
|
|
clk_disable(host->clk);
|
|
}
|
|
|
|
static int __devexit s3cmci_remove(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
|
struct s3cmci_host *host = mmc_priv(mmc);
|
|
|
|
s3cmci_shutdown(pdev);
|
|
|
|
clk_put(host->clk);
|
|
|
|
tasklet_disable(&host->pio_tasklet);
|
|
s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client);
|
|
|
|
free_irq(host->irq, host);
|
|
|
|
iounmap(host->base);
|
|
release_mem_region(host->mem->start, RESSIZE(host->mem));
|
|
|
|
mmc_free_host(mmc);
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit s3cmci_2410_probe(struct platform_device *dev)
|
|
{
|
|
return s3cmci_probe(dev, 0);
|
|
}
|
|
|
|
static int __devinit s3cmci_2412_probe(struct platform_device *dev)
|
|
{
|
|
return s3cmci_probe(dev, 1);
|
|
}
|
|
|
|
static int __devinit s3cmci_2440_probe(struct platform_device *dev)
|
|
{
|
|
return s3cmci_probe(dev, 1);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int s3cmci_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(dev);
|
|
|
|
return mmc_suspend_host(mmc, state);
|
|
}
|
|
|
|
static int s3cmci_resume(struct platform_device *dev)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(dev);
|
|
|
|
return mmc_resume_host(mmc);
|
|
}
|
|
|
|
#else /* CONFIG_PM */
|
|
#define s3cmci_suspend NULL
|
|
#define s3cmci_resume NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
|
|
static struct platform_driver s3cmci_2410_driver = {
|
|
.driver.name = "s3c2410-sdi",
|
|
.driver.owner = THIS_MODULE,
|
|
.probe = s3cmci_2410_probe,
|
|
.remove = __devexit_p(s3cmci_remove),
|
|
.shutdown = s3cmci_shutdown,
|
|
.suspend = s3cmci_suspend,
|
|
.resume = s3cmci_resume,
|
|
};
|
|
|
|
static struct platform_driver s3cmci_2412_driver = {
|
|
.driver.name = "s3c2412-sdi",
|
|
.driver.owner = THIS_MODULE,
|
|
.probe = s3cmci_2412_probe,
|
|
.remove = __devexit_p(s3cmci_remove),
|
|
.shutdown = s3cmci_shutdown,
|
|
.suspend = s3cmci_suspend,
|
|
.resume = s3cmci_resume,
|
|
};
|
|
|
|
static struct platform_driver s3cmci_2440_driver = {
|
|
.driver.name = "s3c2440-sdi",
|
|
.driver.owner = THIS_MODULE,
|
|
.probe = s3cmci_2440_probe,
|
|
.remove = __devexit_p(s3cmci_remove),
|
|
.shutdown = s3cmci_shutdown,
|
|
.suspend = s3cmci_suspend,
|
|
.resume = s3cmci_resume,
|
|
};
|
|
|
|
|
|
static int __init s3cmci_init(void)
|
|
{
|
|
platform_driver_register(&s3cmci_2410_driver);
|
|
platform_driver_register(&s3cmci_2412_driver);
|
|
platform_driver_register(&s3cmci_2440_driver);
|
|
return 0;
|
|
}
|
|
|
|
static void __exit s3cmci_exit(void)
|
|
{
|
|
platform_driver_unregister(&s3cmci_2410_driver);
|
|
platform_driver_unregister(&s3cmci_2412_driver);
|
|
platform_driver_unregister(&s3cmci_2440_driver);
|
|
}
|
|
|
|
module_init(s3cmci_init);
|
|
module_exit(s3cmci_exit);
|
|
|
|
MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>");
|
|
MODULE_ALIAS("platform:s3c2410-sdi");
|
|
MODULE_ALIAS("platform:s3c2412-sdi");
|
|
MODULE_ALIAS("platform:s3c2440-sdi");
|