Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/gpu/drm/i915/i915_irq.c
Chris Wilson 8692d00e99 drm/i915: Replace vblank PM QoS with "Interrupt-Based AGPBUSY#" 
I stumbled over this magic bit in the gen3 INSTPM:

Bit11 Interrupt-Based AGPBUSY# Enable:

‘0’ = Pending GMCH interrupts will not cause AGPBUSY# assertion.
‘1’ = Pending GMCH interrupts will cause AGPBUSY# assertion and hence
      can cause the CPU to exit C3.  There is no suppression of cacheable
      writes.

Note that in either case in C3 the interrupts are not lost. They will be
forwarded to the ICH when the GMCH is out of C3.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@kernel.org
2011-03-01 17:33:38 +00:00

1814 lines
48 KiB
C
Raw Blame History

/* i915_irq.c -- IRQ support for the I915 -*- linux-c -*-
*/
/*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include <linux/sysrq.h>
#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
#define MAX_NOPID ((u32)~0)
/**
* Interrupts that are always left unmasked.
*
* Since pipe events are edge-triggered from the PIPESTAT register to IIR,
* we leave them always unmasked in IMR and then control enabling them through
* PIPESTAT alone.
*/
#define I915_INTERRUPT_ENABLE_FIX \
(I915_ASLE_INTERRUPT | \
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | \
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | \
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT | \
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
/** Interrupts that we mask and unmask at runtime. */
#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT | I915_BSD_USER_INTERRUPT)
#define I915_PIPE_VBLANK_STATUS (PIPE_START_VBLANK_INTERRUPT_STATUS |\
PIPE_VBLANK_INTERRUPT_STATUS)
#define I915_PIPE_VBLANK_ENABLE (PIPE_START_VBLANK_INTERRUPT_ENABLE |\
PIPE_VBLANK_INTERRUPT_ENABLE)
#define DRM_I915_VBLANK_PIPE_ALL (DRM_I915_VBLANK_PIPE_A | \
DRM_I915_VBLANK_PIPE_B)
/* For display hotplug interrupt */
static void
ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
{
if ((dev_priv->irq_mask & mask) != 0) {
dev_priv->irq_mask &= ~mask;
I915_WRITE(DEIMR, dev_priv->irq_mask);
POSTING_READ(DEIMR);
}
}
static inline void
ironlake_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
{
if ((dev_priv->irq_mask & mask) != mask) {
dev_priv->irq_mask |= mask;
I915_WRITE(DEIMR, dev_priv->irq_mask);
POSTING_READ(DEIMR);
}
}
void
i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
{
if ((dev_priv->pipestat[pipe] & mask) != mask) {
u32 reg = PIPESTAT(pipe);
dev_priv->pipestat[pipe] |= mask;
/* Enable the interrupt, clear any pending status */
I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
POSTING_READ(reg);
}
}
void
i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
{
if ((dev_priv->pipestat[pipe] & mask) != 0) {
u32 reg = PIPESTAT(pipe);
dev_priv->pipestat[pipe] &= ~mask;
I915_WRITE(reg, dev_priv->pipestat[pipe]);
POSTING_READ(reg);
}
}
/**
* intel_enable_asle - enable ASLE interrupt for OpRegion
*/
void intel_enable_asle(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (HAS_PCH_SPLIT(dev))
ironlake_enable_display_irq(dev_priv, DE_GSE);
else {
i915_enable_pipestat(dev_priv, 1,
PIPE_LEGACY_BLC_EVENT_ENABLE);
if (INTEL_INFO(dev)->gen >= 4)
i915_enable_pipestat(dev_priv, 0,
PIPE_LEGACY_BLC_EVENT_ENABLE);
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
* @pipe: pipe to check
*
* Reading certain registers when the pipe is disabled can hang the chip.
* Use this routine to make sure the PLL is running and the pipe is active
* before reading such registers if unsure.
*/
static int
i915_pipe_enabled(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
return I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE;
}
/* Called from drm generic code, passed a 'crtc', which
* we use as a pipe index
*/
u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long high_frame;
unsigned long low_frame;
u32 high1, high2, low;
if (!i915_pipe_enabled(dev, pipe)) {
DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
high_frame = PIPEFRAME(pipe);
low_frame = PIPEFRAMEPIXEL(pipe);
/*
* High & low register fields aren't synchronized, so make sure
* we get a low value that's stable across two reads of the high
* register.
*/
do {
high1 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
low = I915_READ(low_frame) & PIPE_FRAME_LOW_MASK;
high2 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
} while (high1 != high2);
high1 >>= PIPE_FRAME_HIGH_SHIFT;
low >>= PIPE_FRAME_LOW_SHIFT;
return (high1 << 8) | low;
}
u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int reg = PIPE_FRMCOUNT_GM45(pipe);
if (!i915_pipe_enabled(dev, pipe)) {
DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
return I915_READ(reg);
}
int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
int *vpos, int *hpos)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 vbl = 0, position = 0;
int vbl_start, vbl_end, htotal, vtotal;
bool in_vbl = true;
int ret = 0;
if (!i915_pipe_enabled(dev, pipe)) {
DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
/* Get vtotal. */
vtotal = 1 + ((I915_READ(VTOTAL(pipe)) >> 16) & 0x1fff);
if (INTEL_INFO(dev)->gen >= 4) {
/* No obvious pixelcount register. Only query vertical
* scanout position from Display scan line register.
*/
position = I915_READ(PIPEDSL(pipe));
/* Decode into vertical scanout position. Don't have
* horizontal scanout position.
*/
*vpos = position & 0x1fff;
*hpos = 0;
} else {
/* Have access to pixelcount since start of frame.
* We can split this into vertical and horizontal
* scanout position.
*/
position = (I915_READ(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
htotal = 1 + ((I915_READ(HTOTAL(pipe)) >> 16) & 0x1fff);
*vpos = position / htotal;
*hpos = position - (*vpos * htotal);
}
/* Query vblank area. */
vbl = I915_READ(VBLANK(pipe));
/* Test position against vblank region. */
vbl_start = vbl & 0x1fff;
vbl_end = (vbl >> 16) & 0x1fff;
if ((*vpos < vbl_start) || (*vpos > vbl_end))
in_vbl = false;
/* Inside "upper part" of vblank area? Apply corrective offset: */
if (in_vbl && (*vpos >= vbl_start))
*vpos = *vpos - vtotal;
/* Readouts valid? */
if (vbl > 0)
ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE;
/* In vblank? */
if (in_vbl)
ret |= DRM_SCANOUTPOS_INVBL;
return ret;
}
int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
int *max_error,
struct timeval *vblank_time,
unsigned flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
if (pipe < 0 || pipe >= dev_priv->num_pipe) {
DRM_ERROR("Invalid crtc %d\n", pipe);
return -EINVAL;
}
/* Get drm_crtc to timestamp: */
crtc = intel_get_crtc_for_pipe(dev, pipe);
if (crtc == NULL) {
DRM_ERROR("Invalid crtc %d\n", pipe);
return -EINVAL;
}
if (!crtc->enabled) {
DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
return -EBUSY;
}
/* Helper routine in DRM core does all the work: */
return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error,
vblank_time, flags,
crtc);
}
/*
* Handle hotplug events outside the interrupt handler proper.
*/
static void i915_hotplug_work_func(struct work_struct *work)
{
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
hotplug_work);
struct drm_device *dev = dev_priv->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *encoder;
DRM_DEBUG_KMS("running encoder hotplug functions\n");
list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
if (encoder->hot_plug)
encoder->hot_plug(encoder);
/* Just fire off a uevent and let userspace tell us what to do */
drm_helper_hpd_irq_event(dev);
}
static void i915_handle_rps_change(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 busy_up, busy_down, max_avg, min_avg;
u8 new_delay = dev_priv->cur_delay;
I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG);
busy_up = I915_READ(RCPREVBSYTUPAVG);
busy_down = I915_READ(RCPREVBSYTDNAVG);
max_avg = I915_READ(RCBMAXAVG);
min_avg = I915_READ(RCBMINAVG);
/* Handle RCS change request from hw */
if (busy_up > max_avg) {
if (dev_priv->cur_delay != dev_priv->max_delay)
new_delay = dev_priv->cur_delay - 1;
if (new_delay < dev_priv->max_delay)
new_delay = dev_priv->max_delay;
} else if (busy_down < min_avg) {
if (dev_priv->cur_delay != dev_priv->min_delay)
new_delay = dev_priv->cur_delay + 1;
if (new_delay > dev_priv->min_delay)
new_delay = dev_priv->min_delay;
}
if (ironlake_set_drps(dev, new_delay))
dev_priv->cur_delay = new_delay;
return;
}
static void notify_ring(struct drm_device *dev,
struct intel_ring_buffer *ring)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 seqno;
if (ring->obj == NULL)
return;
seqno = ring->get_seqno(ring);
trace_i915_gem_request_complete(ring, seqno);
ring->irq_seqno = seqno;
wake_up_all(&ring->irq_queue);
dev_priv->hangcheck_count = 0;
mod_timer(&dev_priv->hangcheck_timer,
jiffies + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
}
static void gen6_pm_irq_handler(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u8 new_delay = dev_priv->cur_delay;
u32 pm_iir;
pm_iir = I915_READ(GEN6_PMIIR);
if (!pm_iir)
return;
if (pm_iir & GEN6_PM_RP_UP_THRESHOLD) {
if (dev_priv->cur_delay != dev_priv->max_delay)
new_delay = dev_priv->cur_delay + 1;
if (new_delay > dev_priv->max_delay)
new_delay = dev_priv->max_delay;
} else if (pm_iir & (GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT)) {
if (dev_priv->cur_delay != dev_priv->min_delay)
new_delay = dev_priv->cur_delay - 1;
if (new_delay < dev_priv->min_delay) {
new_delay = dev_priv->min_delay;
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
I915_READ(GEN6_RP_INTERRUPT_LIMITS) |
((new_delay << 16) & 0x3f0000));
} else {
/* Make sure we continue to get down interrupts
* until we hit the minimum frequency */
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
I915_READ(GEN6_RP_INTERRUPT_LIMITS) & ~0x3f0000);
}
}
gen6_set_rps(dev, new_delay);
dev_priv->cur_delay = new_delay;
I915_WRITE(GEN6_PMIIR, pm_iir);
}
static void pch_irq_handler(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 pch_iir;
int pipe;
pch_iir = I915_READ(SDEIIR);
if (pch_iir & SDE_AUDIO_POWER_MASK)
DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
(pch_iir & SDE_AUDIO_POWER_MASK) >>
SDE_AUDIO_POWER_SHIFT);
if (pch_iir & SDE_GMBUS)
DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n");
if (pch_iir & SDE_AUDIO_HDCP_MASK)
DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n");
if (pch_iir & SDE_AUDIO_TRANS_MASK)
DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n");
if (pch_iir & SDE_POISON)
DRM_ERROR("PCH poison interrupt\n");
if (pch_iir & SDE_FDI_MASK)
for_each_pipe(pipe)
DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
pipe_name(pipe),
I915_READ(FDI_RX_IIR(pipe)));
if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE))
DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n");
if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR))
DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n");
if (pch_iir & SDE_TRANSB_FIFO_UNDER)
DRM_DEBUG_DRIVER("PCH transcoder B underrun interrupt\n");
if (pch_iir & SDE_TRANSA_FIFO_UNDER)
DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n");
}
static irqreturn_t ironlake_irq_handler(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int ret = IRQ_NONE;
u32 de_iir, gt_iir, de_ier, pch_iir, pm_iir;
u32 hotplug_mask;
struct drm_i915_master_private *master_priv;
u32 bsd_usr_interrupt = GT_BSD_USER_INTERRUPT;
if (IS_GEN6(dev))
bsd_usr_interrupt = GT_GEN6_BSD_USER_INTERRUPT;
/* disable master interrupt before clearing iir */
de_ier = I915_READ(DEIER);
I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
POSTING_READ(DEIER);
de_iir = I915_READ(DEIIR);
gt_iir = I915_READ(GTIIR);
pch_iir = I915_READ(SDEIIR);
pm_iir = I915_READ(GEN6_PMIIR);
if (de_iir == 0 && gt_iir == 0 && pch_iir == 0 &&
(!IS_GEN6(dev) || pm_iir == 0))
goto done;
if (HAS_PCH_CPT(dev))
hotplug_mask = SDE_HOTPLUG_MASK_CPT;
else
hotplug_mask = SDE_HOTPLUG_MASK;
ret = IRQ_HANDLED;
if (dev->primary->master) {
master_priv = dev->primary->master->driver_priv;
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_dispatch =
READ_BREADCRUMB(dev_priv);
}
if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY))
notify_ring(dev, &dev_priv->ring[RCS]);
if (gt_iir & bsd_usr_interrupt)
notify_ring(dev, &dev_priv->ring[VCS]);
if (gt_iir & GT_BLT_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[BCS]);
if (de_iir & DE_GSE)
intel_opregion_gse_intr(dev);
if (de_iir & DE_PLANEA_FLIP_DONE) {
intel_prepare_page_flip(dev, 0);
intel_finish_page_flip_plane(dev, 0);
}
if (de_iir & DE_PLANEB_FLIP_DONE) {
intel_prepare_page_flip(dev, 1);
intel_finish_page_flip_plane(dev, 1);
}
if (de_iir & DE_PIPEA_VBLANK)
drm_handle_vblank(dev, 0);
if (de_iir & DE_PIPEB_VBLANK)
drm_handle_vblank(dev, 1);
/* check event from PCH */
if (de_iir & DE_PCH_EVENT) {
if (pch_iir & hotplug_mask)
queue_work(dev_priv->wq, &dev_priv->hotplug_work);
pch_irq_handler(dev);
}
if (de_iir & DE_PCU_EVENT) {
I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
i915_handle_rps_change(dev);
}
if (IS_GEN6(dev))
gen6_pm_irq_handler(dev);
/* should clear PCH hotplug event before clear CPU irq */
I915_WRITE(SDEIIR, pch_iir);
I915_WRITE(GTIIR, gt_iir);
I915_WRITE(DEIIR, de_iir);
done:
I915_WRITE(DEIER, de_ier);
POSTING_READ(DEIER);
return ret;
}
/**
* i915_error_work_func - do process context error handling work
* @work: work struct
*
* Fire an error uevent so userspace can see that a hang or error
* was detected.
*/
static void i915_error_work_func(struct work_struct *work)
{
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
error_work);
struct drm_device *dev = dev_priv->dev;
char *error_event[] = { "ERROR=1", NULL };
char *reset_event[] = { "RESET=1", NULL };
char *reset_done_event[] = { "ERROR=0", NULL };
kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event);
if (atomic_read(&dev_priv->mm.wedged)) {
DRM_DEBUG_DRIVER("resetting chip\n");
kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_event);
if (!i915_reset(dev, GRDOM_RENDER)) {
atomic_set(&dev_priv->mm.wedged, 0);
kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_done_event);
}
complete_all(&dev_priv->error_completion);
}
}
#ifdef CONFIG_DEBUG_FS
static struct drm_i915_error_object *
i915_error_object_create(struct drm_i915_private *dev_priv,
struct drm_i915_gem_object *src)
{
struct drm_i915_error_object *dst;
int page, page_count;
u32 reloc_offset;
if (src == NULL || src->pages == NULL)
return NULL;
page_count = src->base.size / PAGE_SIZE;
dst = kmalloc(sizeof(*dst) + page_count * sizeof (u32 *), GFP_ATOMIC);
if (dst == NULL)
return NULL;
reloc_offset = src->gtt_offset;
for (page = 0; page < page_count; page++) {
unsigned long flags;
void __iomem *s;
void *d;
d = kmalloc(PAGE_SIZE, GFP_ATOMIC);
if (d == NULL)
goto unwind;
local_irq_save(flags);
s = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
reloc_offset);
memcpy_fromio(d, s, PAGE_SIZE);
io_mapping_unmap_atomic(s);
local_irq_restore(flags);
dst->pages[page] = d;
reloc_offset += PAGE_SIZE;
}
dst->page_count = page_count;
dst->gtt_offset = src->gtt_offset;
return dst;
unwind:
while (page--)
kfree(dst->pages[page]);
kfree(dst);
return NULL;
}
static void
i915_error_object_free(struct drm_i915_error_object *obj)
{
int page;
if (obj == NULL)
return;
for (page = 0; page < obj->page_count; page++)
kfree(obj->pages[page]);
kfree(obj);
}
static void
i915_error_state_free(struct drm_device *dev,
struct drm_i915_error_state *error)
{
int i;
for (i = 0; i < ARRAY_SIZE(error->batchbuffer); i++)
i915_error_object_free(error->batchbuffer[i]);
for (i = 0; i < ARRAY_SIZE(error->ringbuffer); i++)
i915_error_object_free(error->ringbuffer[i]);
kfree(error->active_bo);
kfree(error->overlay);
kfree(error);
}
static u32 capture_bo_list(struct drm_i915_error_buffer *err,
int count,
struct list_head *head)
{
struct drm_i915_gem_object *obj;
int i = 0;
list_for_each_entry(obj, head, mm_list) {
err->size = obj->base.size;
err->name = obj->base.name;
err->seqno = obj->last_rendering_seqno;
err->gtt_offset = obj->gtt_offset;
err->read_domains = obj->base.read_domains;
err->write_domain = obj->base.write_domain;
err->fence_reg = obj->fence_reg;
err->pinned = 0;
if (obj->pin_count > 0)
err->pinned = 1;
if (obj->user_pin_count > 0)
err->pinned = -1;
err->tiling = obj->tiling_mode;
err->dirty = obj->dirty;
err->purgeable = obj->madv != I915_MADV_WILLNEED;
err->ring = obj->ring ? obj->ring->id : 0;
err->agp_type = obj->agp_type == AGP_USER_CACHED_MEMORY;
if (++i == count)
break;
err++;
}
return i;
}
static void i915_gem_record_fences(struct drm_device *dev,
struct drm_i915_error_state *error)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
/* Fences */
switch (INTEL_INFO(dev)->gen) {
case 6:
for (i = 0; i < 16; i++)
error->fence[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8));
break;
case 5:
case 4:
for (i = 0; i < 16; i++)
error->fence[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
break;
case 3:
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
for (i = 0; i < 8; i++)
error->fence[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
case 2:
for (i = 0; i < 8; i++)
error->fence[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
break;
}
}
static struct drm_i915_error_object *
i915_error_first_batchbuffer(struct drm_i915_private *dev_priv,
struct intel_ring_buffer *ring)
{
struct drm_i915_gem_object *obj;
u32 seqno;
if (!ring->get_seqno)
return NULL;
seqno = ring->get_seqno(ring);
list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
if (obj->ring != ring)
continue;
if (i915_seqno_passed(seqno, obj->last_rendering_seqno))
continue;
if ((obj->base.read_domains & I915_GEM_DOMAIN_COMMAND) == 0)
continue;
/* We need to copy these to an anonymous buffer as the simplest
* method to avoid being overwritten by userspace.
*/
return i915_error_object_create(dev_priv, obj);
}
return NULL;
}
/**
* i915_capture_error_state - capture an error record for later analysis
* @dev: drm device
*
* Should be called when an error is detected (either a hang or an error
* interrupt) to capture error state from the time of the error. Fills
* out a structure which becomes available in debugfs for user level tools
* to pick up.
*/
static void i915_capture_error_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj;
struct drm_i915_error_state *error;
unsigned long flags;
int i, pipe;
spin_lock_irqsave(&dev_priv->error_lock, flags);
error = dev_priv->first_error;
spin_unlock_irqrestore(&dev_priv->error_lock, flags);
if (error)
return;
/* Account for pipe specific data like PIPE*STAT */
error = kmalloc(sizeof(*error), GFP_ATOMIC);
if (!error) {
DRM_DEBUG_DRIVER("out of memory, not capturing error state\n");
return;
}
DRM_INFO("capturing error event; look for more information in /debug/dri/%d/i915_error_state\n",
dev->primary->index);
error->seqno = dev_priv->ring[RCS].get_seqno(&dev_priv->ring[RCS]);
error->eir = I915_READ(EIR);
error->pgtbl_er = I915_READ(PGTBL_ER);
for_each_pipe(pipe)
error->pipestat[pipe] = I915_READ(PIPESTAT(pipe));
error->instpm = I915_READ(INSTPM);
error->error = 0;
if (INTEL_INFO(dev)->gen >= 6) {
error->error = I915_READ(ERROR_GEN6);
error->bcs_acthd = I915_READ(BCS_ACTHD);
error->bcs_ipehr = I915_READ(BCS_IPEHR);
error->bcs_ipeir = I915_READ(BCS_IPEIR);
error->bcs_instdone = I915_READ(BCS_INSTDONE);
error->bcs_seqno = 0;
if (dev_priv->ring[BCS].get_seqno)
error->bcs_seqno = dev_priv->ring[BCS].get_seqno(&dev_priv->ring[BCS]);
error->vcs_acthd = I915_READ(VCS_ACTHD);
error->vcs_ipehr = I915_READ(VCS_IPEHR);
error->vcs_ipeir = I915_READ(VCS_IPEIR);
error->vcs_instdone = I915_READ(VCS_INSTDONE);
error->vcs_seqno = 0;
if (dev_priv->ring[VCS].get_seqno)
error->vcs_seqno = dev_priv->ring[VCS].get_seqno(&dev_priv->ring[VCS]);
}
if (INTEL_INFO(dev)->gen >= 4) {
error->ipeir = I915_READ(IPEIR_I965);
error->ipehr = I915_READ(IPEHR_I965);
error->instdone = I915_READ(INSTDONE_I965);
error->instps = I915_READ(INSTPS);
error->instdone1 = I915_READ(INSTDONE1);
error->acthd = I915_READ(ACTHD_I965);
error->bbaddr = I915_READ64(BB_ADDR);
} else {
error->ipeir = I915_READ(IPEIR);
error->ipehr = I915_READ(IPEHR);
error->instdone = I915_READ(INSTDONE);
error->acthd = I915_READ(ACTHD);
error->bbaddr = 0;
}
i915_gem_record_fences(dev, error);
/* Record the active batch and ring buffers */
for (i = 0; i < I915_NUM_RINGS; i++) {
error->batchbuffer[i] =
i915_error_first_batchbuffer(dev_priv,
&dev_priv->ring[i]);
error->ringbuffer[i] =
i915_error_object_create(dev_priv,
dev_priv->ring[i].obj);
}
/* Record buffers on the active and pinned lists. */
error->active_bo = NULL;
error->pinned_bo = NULL;
i = 0;
list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list)
i++;
error->active_bo_count = i;
list_for_each_entry(obj, &dev_priv->mm.pinned_list, mm_list)
i++;
error->pinned_bo_count = i - error->active_bo_count;
error->active_bo = NULL;
error->pinned_bo = NULL;
if (i) {
error->active_bo = kmalloc(sizeof(*error->active_bo)*i,
GFP_ATOMIC);
if (error->active_bo)
error->pinned_bo =
error->active_bo + error->active_bo_count;
}
if (error->active_bo)
error->active_bo_count =
capture_bo_list(error->active_bo,
error->active_bo_count,
&dev_priv->mm.active_list);
if (error->pinned_bo)
error->pinned_bo_count =
capture_bo_list(error->pinned_bo,
error->pinned_bo_count,
&dev_priv->mm.pinned_list);
do_gettimeofday(&error->time);
error->overlay = intel_overlay_capture_error_state(dev);
error->display = intel_display_capture_error_state(dev);
spin_lock_irqsave(&dev_priv->error_lock, flags);
if (dev_priv->first_error == NULL) {
dev_priv->first_error = error;
error = NULL;
}
spin_unlock_irqrestore(&dev_priv->error_lock, flags);
if (error)
i915_error_state_free(dev, error);
}
void i915_destroy_error_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_error_state *error;
spin_lock(&dev_priv->error_lock);
error = dev_priv->first_error;
dev_priv->first_error = NULL;
spin_unlock(&dev_priv->error_lock);
if (error)
i915_error_state_free(dev, error);
}
#else
#define i915_capture_error_state(x)
#endif
static void i915_report_and_clear_eir(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 eir = I915_READ(EIR);
int pipe;
if (!eir)
return;
printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
eir);
if (IS_G4X(dev)) {
if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) {
u32 ipeir = I915_READ(IPEIR_I965);
printk(KERN_ERR " IPEIR: 0x%08x\n",
I915_READ(IPEIR_I965));
printk(KERN_ERR " IPEHR: 0x%08x\n",
I915_READ(IPEHR_I965));
printk(KERN_ERR " INSTDONE: 0x%08x\n",
I915_READ(INSTDONE_I965));
printk(KERN_ERR " INSTPS: 0x%08x\n",
I915_READ(INSTPS));
printk(KERN_ERR " INSTDONE1: 0x%08x\n",
I915_READ(INSTDONE1));
printk(KERN_ERR " ACTHD: 0x%08x\n",
I915_READ(ACTHD_I965));
I915_WRITE(IPEIR_I965, ipeir);
POSTING_READ(IPEIR_I965);
}
if (eir & GM45_ERROR_PAGE_TABLE) {
u32 pgtbl_err = I915_READ(PGTBL_ER);
printk(KERN_ERR "page table error\n");
printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
pgtbl_err);
I915_WRITE(PGTBL_ER, pgtbl_err);
POSTING_READ(PGTBL_ER);
}
}
if (!IS_GEN2(dev)) {
if (eir & I915_ERROR_PAGE_TABLE) {
u32 pgtbl_err = I915_READ(PGTBL_ER);
printk(KERN_ERR "page table error\n");
printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
pgtbl_err);
I915_WRITE(PGTBL_ER, pgtbl_err);
POSTING_READ(PGTBL_ER);
}
}
if (eir & I915_ERROR_MEMORY_REFRESH) {
printk(KERN_ERR "memory refresh error:\n");
for_each_pipe(pipe)
printk(KERN_ERR "pipe %c stat: 0x%08x\n",
pipe_name(pipe), I915_READ(PIPESTAT(pipe)));
/* pipestat has already been acked */
}
if (eir & I915_ERROR_INSTRUCTION) {
printk(KERN_ERR "instruction error\n");
printk(KERN_ERR " INSTPM: 0x%08x\n",
I915_READ(INSTPM));
if (INTEL_INFO(dev)->gen < 4) {
u32 ipeir = I915_READ(IPEIR);
printk(KERN_ERR " IPEIR: 0x%08x\n",
I915_READ(IPEIR));
printk(KERN_ERR " IPEHR: 0x%08x\n",
I915_READ(IPEHR));
printk(KERN_ERR " INSTDONE: 0x%08x\n",
I915_READ(INSTDONE));
printk(KERN_ERR " ACTHD: 0x%08x\n",
I915_READ(ACTHD));
I915_WRITE(IPEIR, ipeir);
POSTING_READ(IPEIR);
} else {
u32 ipeir = I915_READ(IPEIR_I965);
printk(KERN_ERR " IPEIR: 0x%08x\n",
I915_READ(IPEIR_I965));
printk(KERN_ERR " IPEHR: 0x%08x\n",
I915_READ(IPEHR_I965));
printk(KERN_ERR " INSTDONE: 0x%08x\n",
I915_READ(INSTDONE_I965));
printk(KERN_ERR " INSTPS: 0x%08x\n",
I915_READ(INSTPS));
printk(KERN_ERR " INSTDONE1: 0x%08x\n",
I915_READ(INSTDONE1));
printk(KERN_ERR " ACTHD: 0x%08x\n",
I915_READ(ACTHD_I965));
I915_WRITE(IPEIR_I965, ipeir);
POSTING_READ(IPEIR_I965);
}
}
I915_WRITE(EIR, eir);
POSTING_READ(EIR);
eir = I915_READ(EIR);
if (eir) {
/*
* some errors might have become stuck,
* mask them.
*/
DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
I915_WRITE(EMR, I915_READ(EMR) | eir);
I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
}
}
/**
* i915_handle_error - handle an error interrupt
* @dev: drm device
*
* Do some basic checking of regsiter state at error interrupt time and
* dump it to the syslog. Also call i915_capture_error_state() to make
* sure we get a record and make it available in debugfs. Fire a uevent
* so userspace knows something bad happened (should trigger collection
* of a ring dump etc.).
*/
void i915_handle_error(struct drm_device *dev, bool wedged)
{
struct drm_i915_private *dev_priv = dev->dev_private;
i915_capture_error_state(dev);
i915_report_and_clear_eir(dev);
if (wedged) {
INIT_COMPLETION(dev_priv->error_completion);
atomic_set(&dev_priv->mm.wedged, 1);
/*
* Wakeup waiting processes so they don't hang
*/
wake_up_all(&dev_priv->ring[RCS].irq_queue);
if (HAS_BSD(dev))
wake_up_all(&dev_priv->ring[VCS].irq_queue);
if (HAS_BLT(dev))
wake_up_all(&dev_priv->ring[BCS].irq_queue);
}
queue_work(dev_priv->wq, &dev_priv->error_work);
}
static void i915_pageflip_stall_check(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct drm_i915_gem_object *obj;
struct intel_unpin_work *work;
unsigned long flags;
bool stall_detected;
/* Ignore early vblank irqs */
if (intel_crtc == NULL)
return;
spin_lock_irqsave(&dev->event_lock, flags);
work = intel_crtc->unpin_work;
if (work == NULL || work->pending || !work->enable_stall_check) {
/* Either the pending flip IRQ arrived, or we're too early. Don't check */
spin_unlock_irqrestore(&dev->event_lock, flags);
return;
}
/* Potential stall - if we see that the flip has happened, assume a missed interrupt */
obj = work->pending_flip_obj;
if (INTEL_INFO(dev)->gen >= 4) {
int dspsurf = DSPSURF(intel_crtc->plane);
stall_detected = I915_READ(dspsurf) == obj->gtt_offset;
} else {
int dspaddr = DSPADDR(intel_crtc->plane);
stall_detected = I915_READ(dspaddr) == (obj->gtt_offset +
crtc->y * crtc->fb->pitch +
crtc->x * crtc->fb->bits_per_pixel/8);
}
spin_unlock_irqrestore(&dev->event_lock, flags);
if (stall_detected) {
DRM_DEBUG_DRIVER("Pageflip stall detected\n");
intel_prepare_page_flip(dev, intel_crtc->plane);
}
}
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_i915_master_private *master_priv;
u32 iir, new_iir;
u32 pipe_stats[I915_MAX_PIPES];
u32 vblank_status;
int vblank = 0;
unsigned long irqflags;
int irq_received;
int ret = IRQ_NONE, pipe;
bool blc_event = false;
atomic_inc(&dev_priv->irq_received);
if (HAS_PCH_SPLIT(dev))
return ironlake_irq_handler(dev);
iir = I915_READ(IIR);
if (INTEL_INFO(dev)->gen >= 4)
vblank_status = PIPE_START_VBLANK_INTERRUPT_STATUS;
else
vblank_status = PIPE_VBLANK_INTERRUPT_STATUS;
for (;;) {
irq_received = iir != 0;
/* Can't rely on pipestat interrupt bit in iir as it might
* have been cleared after the pipestat interrupt was received.
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false);
for_each_pipe(pipe) {
int reg = PIPESTAT(pipe);
pipe_stats[pipe] = I915_READ(reg);
/*
* Clear the PIPE*STAT regs before the IIR
*/
if (pipe_stats[pipe] & 0x8000ffff) {
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
DRM_DEBUG_DRIVER("pipe %c underrun\n",
pipe_name(pipe));
I915_WRITE(reg, pipe_stats[pipe]);
irq_received = 1;
}
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
if (!irq_received)
break;
ret = IRQ_HANDLED;
/* Consume port. Then clear IIR or we'll miss events */
if ((I915_HAS_HOTPLUG(dev)) &&
(iir & I915_DISPLAY_PORT_INTERRUPT)) {
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
if (hotplug_status & dev_priv->hotplug_supported_mask)
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
I915_READ(PORT_HOTPLUG_STAT);
}
I915_WRITE(IIR, iir);
new_iir = I915_READ(IIR); /* Flush posted writes */
if (dev->primary->master) {
master_priv = dev->primary->master->driver_priv;
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_dispatch =
READ_BREADCRUMB(dev_priv);
}
if (iir & I915_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[RCS]);
if (iir & I915_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT) {
intel_prepare_page_flip(dev, 0);
if (dev_priv->flip_pending_is_done)
intel_finish_page_flip_plane(dev, 0);
}
if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT) {
intel_prepare_page_flip(dev, 1);
if (dev_priv->flip_pending_is_done)
intel_finish_page_flip_plane(dev, 1);
}
for_each_pipe(pipe) {
if (pipe_stats[pipe] & vblank_status &&
drm_handle_vblank(dev, pipe)) {
vblank++;
if (!dev_priv->flip_pending_is_done) {
i915_pageflip_stall_check(dev, pipe);
intel_finish_page_flip(dev, pipe);
}
}
if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
blc_event = true;
}
if (blc_event || (iir & I915_ASLE_INTERRUPT))
intel_opregion_asle_intr(dev);
/* With MSI, interrupts are only generated when iir
* transitions from zero to nonzero. If another bit got
* set while we were handling the existing iir bits, then
* we would never get another interrupt.
*
* This is fine on non-MSI as well, as if we hit this path
* we avoid exiting the interrupt handler only to generate
* another one.
*
* Note that for MSI this could cause a stray interrupt report
* if an interrupt landed in the time between writing IIR and
* the posting read. This should be rare enough to never
* trigger the 99% of 100,000 interrupts test for disabling
* stray interrupts.
*/
iir = new_iir;
}
return ret;
}
static int i915_emit_irq(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
i915_kernel_lost_context(dev);
DRM_DEBUG_DRIVER("\n");
dev_priv->counter++;
if (dev_priv->counter > 0x7FFFFFFFUL)
dev_priv->counter = 1;
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_enqueue = dev_priv->counter;
if (BEGIN_LP_RING(4) == 0) {
OUT_RING(MI_STORE_DWORD_INDEX);
OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->counter);
OUT_RING(MI_USER_INTERRUPT);
ADVANCE_LP_RING();
}
return dev_priv->counter;
}
static int i915_wait_irq(struct drm_device * dev, int irq_nr)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
int ret = 0;
struct intel_ring_buffer *ring = LP_RING(dev_priv);
DRM_DEBUG_DRIVER("irq_nr=%d breadcrumb=%d\n", irq_nr,
READ_BREADCRUMB(dev_priv));
if (READ_BREADCRUMB(dev_priv) >= irq_nr) {
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
return 0;
}
if (master_priv->sarea_priv)
master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
if (ring->irq_get(ring)) {
DRM_WAIT_ON(ret, ring->irq_queue, 3 * DRM_HZ,
READ_BREADCRUMB(dev_priv) >= irq_nr);
ring->irq_put(ring);
} else if (wait_for(READ_BREADCRUMB(dev_priv) >= irq_nr, 3000))
ret = -EBUSY;
if (ret == -EBUSY) {
DRM_ERROR("EBUSY -- rec: %d emitted: %d\n",
READ_BREADCRUMB(dev_priv), (int)dev_priv->counter);
}
return ret;
}
/* Needs the lock as it touches the ring.
*/
int i915_irq_emit(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_irq_emit_t *emit = data;
int result;
if (!dev_priv || !LP_RING(dev_priv)->virtual_start) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
mutex_lock(&dev->struct_mutex);
result = i915_emit_irq(dev);
mutex_unlock(&dev->struct_mutex);
if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) {
DRM_ERROR("copy_to_user\n");
return -EFAULT;
}
return 0;
}
/* Doesn't need the hardware lock.
*/
int i915_irq_wait(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_irq_wait_t *irqwait = data;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
return i915_wait_irq(dev, irqwait->irq_seq);
}
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
int i915_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
if (!i915_pipe_enabled(dev, pipe))
return -EINVAL;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (HAS_PCH_SPLIT(dev))
ironlake_enable_display_irq(dev_priv, (pipe == 0) ?
DE_PIPEA_VBLANK: DE_PIPEB_VBLANK);
else if (INTEL_INFO(dev)->gen >= 4)
i915_enable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_ENABLE);
else
i915_enable_pipestat(dev_priv, pipe,
PIPE_VBLANK_INTERRUPT_ENABLE);
/* maintain vblank delivery even in deep C-states */
if (dev_priv->info->gen == 3)
I915_WRITE(INSTPM, INSTPM_AGPBUSY_DIS << 16);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
}
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
void i915_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (dev_priv->info->gen == 3)
I915_WRITE(INSTPM,
INSTPM_AGPBUSY_DIS << 16 | INSTPM_AGPBUSY_DIS);
if (HAS_PCH_SPLIT(dev))
ironlake_disable_display_irq(dev_priv, (pipe == 0) ?
DE_PIPEA_VBLANK: DE_PIPEB_VBLANK);
else
i915_disable_pipestat(dev_priv, pipe,
PIPE_VBLANK_INTERRUPT_ENABLE |
PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
/* Set the vblank monitor pipe
*/
int i915_vblank_pipe_set(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
return 0;
}
int i915_vblank_pipe_get(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_vblank_pipe_t *pipe = data;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
return 0;
}
/**
* Schedule buffer swap at given vertical blank.
*/
int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
/* The delayed swap mechanism was fundamentally racy, and has been
* removed. The model was that the client requested a delayed flip/swap
* from the kernel, then waited for vblank before continuing to perform
* rendering. The problem was that the kernel might wake the client
* up before it dispatched the vblank swap (since the lock has to be
* held while touching the ringbuffer), in which case the client would
* clear and start the next frame before the swap occurred, and
* flicker would occur in addition to likely missing the vblank.
*
* In the absence of this ioctl, userland falls back to a correct path
* of waiting for a vblank, then dispatching the swap on its own.
* Context switching to userland and back is plenty fast enough for
* meeting the requirements of vblank swapping.
*/
return -EINVAL;
}
static u32
ring_last_seqno(struct intel_ring_buffer *ring)
{
return list_entry(ring->request_list.prev,
struct drm_i915_gem_request, list)->seqno;
}
static bool i915_hangcheck_ring_idle(struct intel_ring_buffer *ring, bool *err)
{
if (list_empty(&ring->request_list) ||
i915_seqno_passed(ring->get_seqno(ring), ring_last_seqno(ring))) {
/* Issue a wake-up to catch stuck h/w. */
if (ring->waiting_seqno && waitqueue_active(&ring->irq_queue)) {
DRM_ERROR("Hangcheck timer elapsed... %s idle [waiting on %d, at %d], missed IRQ?\n",
ring->name,
ring->waiting_seqno,
ring->get_seqno(ring));
wake_up_all(&ring->irq_queue);
*err = true;
}
return true;
}
return false;
}
static bool kick_ring(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 tmp = I915_READ_CTL(ring);
if (tmp & RING_WAIT) {
DRM_ERROR("Kicking stuck wait on %s\n",
ring->name);
I915_WRITE_CTL(ring, tmp);
return true;
}
if (IS_GEN6(dev) &&
(tmp & RING_WAIT_SEMAPHORE)) {
DRM_ERROR("Kicking stuck semaphore on %s\n",
ring->name);
I915_WRITE_CTL(ring, tmp);
return true;
}
return false;
}
/**
* This is called when the chip hasn't reported back with completed
* batchbuffers in a long time. The first time this is called we simply record
* ACTHD. If ACTHD hasn't changed by the time the hangcheck timer elapses
* again, we assume the chip is wedged and try to fix it.
*/
void i915_hangcheck_elapsed(unsigned long data)
{
struct drm_device *dev = (struct drm_device *)data;
drm_i915_private_t *dev_priv = dev->dev_private;
uint32_t acthd, instdone, instdone1;
bool err = false;
/* If all work is done then ACTHD clearly hasn't advanced. */
if (i915_hangcheck_ring_idle(&dev_priv->ring[RCS], &err) &&
i915_hangcheck_ring_idle(&dev_priv->ring[VCS], &err) &&
i915_hangcheck_ring_idle(&dev_priv->ring[BCS], &err)) {
dev_priv->hangcheck_count = 0;
if (err)
goto repeat;
return;
}
if (INTEL_INFO(dev)->gen < 4) {
acthd = I915_READ(ACTHD);
instdone = I915_READ(INSTDONE);
instdone1 = 0;
} else {
acthd = I915_READ(ACTHD_I965);
instdone = I915_READ(INSTDONE_I965);
instdone1 = I915_READ(INSTDONE1);
}
if (dev_priv->last_acthd == acthd &&
dev_priv->last_instdone == instdone &&
dev_priv->last_instdone1 == instdone1) {
if (dev_priv->hangcheck_count++ > 1) {
DRM_ERROR("Hangcheck timer elapsed... GPU hung\n");
if (!IS_GEN2(dev)) {
/* Is the chip hanging on a WAIT_FOR_EVENT?
* If so we can simply poke the RB_WAIT bit
* and break the hang. This should work on
* all but the second generation chipsets.
*/
if (kick_ring(&dev_priv->ring[RCS]))
goto repeat;
if (HAS_BSD(dev) &&
kick_ring(&dev_priv->ring[VCS]))
goto repeat;
if (HAS_BLT(dev) &&
kick_ring(&dev_priv->ring[BCS]))
goto repeat;
}
i915_handle_error(dev, true);
return;
}
} else {
dev_priv->hangcheck_count = 0;
dev_priv->last_acthd = acthd;
dev_priv->last_instdone = instdone;
dev_priv->last_instdone1 = instdone1;
}
repeat:
/* Reset timer case chip hangs without another request being added */
mod_timer(&dev_priv->hangcheck_timer,
jiffies + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
}
/* drm_dma.h hooks
*/
static void ironlake_irq_preinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE(HWSTAM, 0xeffe);
/* XXX hotplug from PCH */
I915_WRITE(DEIMR, 0xffffffff);
I915_WRITE(DEIER, 0x0);
POSTING_READ(DEIER);
/* and GT */
I915_WRITE(GTIMR, 0xffffffff);
I915_WRITE(GTIER, 0x0);
POSTING_READ(GTIER);
/* south display irq */
I915_WRITE(SDEIMR, 0xffffffff);
I915_WRITE(SDEIER, 0x0);
POSTING_READ(SDEIER);
}
static int ironlake_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
/* enable kind of interrupts always enabled */
u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
u32 render_irqs;
u32 hotplug_mask;
dev_priv->irq_mask = ~display_mask;
/* should always can generate irq */
I915_WRITE(DEIIR, I915_READ(DEIIR));
I915_WRITE(DEIMR, dev_priv->irq_mask);
I915_WRITE(DEIER, display_mask | DE_PIPEA_VBLANK | DE_PIPEB_VBLANK);
POSTING_READ(DEIER);
dev_priv->gt_irq_mask = ~0;
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
if (IS_GEN6(dev))
render_irqs =
GT_USER_INTERRUPT |
GT_GEN6_BSD_USER_INTERRUPT |
GT_BLT_USER_INTERRUPT;
else
render_irqs =
GT_USER_INTERRUPT |
GT_PIPE_NOTIFY |
GT_BSD_USER_INTERRUPT;
I915_WRITE(GTIER, render_irqs);
POSTING_READ(GTIER);
if (HAS_PCH_CPT(dev)) {
hotplug_mask = (SDE_CRT_HOTPLUG_CPT |
SDE_PORTB_HOTPLUG_CPT |
SDE_PORTC_HOTPLUG_CPT |
SDE_PORTD_HOTPLUG_CPT);
} else {
hotplug_mask = (SDE_CRT_HOTPLUG |
SDE_PORTB_HOTPLUG |
SDE_PORTC_HOTPLUG |
SDE_PORTD_HOTPLUG |
SDE_AUX_MASK);
}
dev_priv->pch_irq_mask = ~hotplug_mask;
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
I915_WRITE(SDEIMR, dev_priv->pch_irq_mask);
I915_WRITE(SDEIER, hotplug_mask);
POSTING_READ(SDEIER);
if (IS_IRONLAKE_M(dev)) {
/* Clear & enable PCU event interrupts */
I915_WRITE(DEIIR, DE_PCU_EVENT);
I915_WRITE(DEIER, I915_READ(DEIER) | DE_PCU_EVENT);
ironlake_enable_display_irq(dev_priv, DE_PCU_EVENT);
}
return 0;
}
void i915_driver_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
atomic_set(&dev_priv->irq_received, 0);
INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
INIT_WORK(&dev_priv->error_work, i915_error_work_func);
if (HAS_PCH_SPLIT(dev)) {
ironlake_irq_preinstall(dev);
return;
}
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_WRITE(HWSTAM, 0xeffe);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
POSTING_READ(IER);
}
/*
* Must be called after intel_modeset_init or hotplug interrupts won't be
* enabled correctly.
*/
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
u32 error_mask;
DRM_INIT_WAITQUEUE(&dev_priv->ring[RCS].irq_queue);
if (HAS_BSD(dev))
DRM_INIT_WAITQUEUE(&dev_priv->ring[VCS].irq_queue);
if (HAS_BLT(dev))
DRM_INIT_WAITQUEUE(&dev_priv->ring[BCS].irq_queue);
dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
if (HAS_PCH_SPLIT(dev))
return ironlake_irq_postinstall(dev);
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask = ~I915_INTERRUPT_ENABLE_FIX;
dev_priv->pipestat[0] = 0;
dev_priv->pipestat[1] = 0;
if (I915_HAS_HOTPLUG(dev)) {
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT;
}
/*
* Enable some error detection, note the instruction error mask
* bit is reserved, so we leave it masked.
*/
if (IS_G4X(dev)) {
error_mask = ~(GM45_ERROR_PAGE_TABLE |
GM45_ERROR_MEM_PRIV |
GM45_ERROR_CP_PRIV |
I915_ERROR_MEMORY_REFRESH);
} else {
error_mask = ~(I915_ERROR_PAGE_TABLE |
I915_ERROR_MEMORY_REFRESH);
}
I915_WRITE(EMR, error_mask);
I915_WRITE(IMR, dev_priv->irq_mask);
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
if (I915_HAS_HOTPLUG(dev)) {
u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
/* Note HDMI and DP share bits */
if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
hotplug_en |= HDMIB_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
hotplug_en |= HDMIC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
hotplug_en |= HDMID_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
hotplug_en |= CRT_HOTPLUG_INT_EN;
/* Programming the CRT detection parameters tends
to generate a spurious hotplug event about three
seconds later. So just do it once.
*/
if (IS_G4X(dev))
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
}
/* Ignore TV since it's buggy */
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
}
intel_opregion_enable_asle(dev);
return 0;
}
static void ironlake_irq_uninstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE(HWSTAM, 0xffffffff);
I915_WRITE(DEIMR, 0xffffffff);
I915_WRITE(DEIER, 0x0);
I915_WRITE(DEIIR, I915_READ(DEIIR));
I915_WRITE(GTIMR, 0xffffffff);
I915_WRITE(GTIER, 0x0);
I915_WRITE(GTIIR, I915_READ(GTIIR));
}
void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
if (!dev_priv)
return;
dev_priv->vblank_pipe = 0;
if (HAS_PCH_SPLIT(dev)) {
ironlake_irq_uninstall(dev);
return;
}
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_WRITE(HWSTAM, 0xffffffff);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe),
I915_READ(PIPESTAT(pipe)) & 0x8000ffff);
I915_WRITE(IIR, I915_READ(IIR));
}
Reference in a new issue View git blame Copy permalink