812c4e40c2
Currently the {set,get}_pull callbacks of the s3c24xx_gpiocfg_default structure
are initalized via s3c_gpio_{get,set}pull_1up. This results in a linker
error when only CONFIG_CPU_S3C2442 is selected:
arch/arm/plat-s3c24xx/built-in.o:(.data+0x13f4): undefined reference to
`s3c_gpio_getpull_1up'
arch/arm/plat-s3c24xx/built-in.o:(.data+0x13f8): undefined reference to
`s3c_gpio_setpull_1up'
The s3c2442 has pulldowns instead of pullups compared to the s3c2440.
The method of controlling them is the same though.
So this patch modifies the existing s3c_gpio_{get,set}pull_1up helper functions
to take an additional parameter deciding whether the pin has a pullup or pulldown.
The s3c_gpio_{get,set}pull_1{down,up} functions then wrap that functions passing
either S3C_GPIO_PULL_UP or S3C_GPIO_PULL_DOWN.
Furthermore this patch sets up the s3c24xx_gpiocfg_default.{get,set}_pull fields
in the s3c244{0,2}_map_io function to the new pulldown helper functions.
Based on patch from "Lars-Peter Clausen" <lars@metafoo.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
205 lines
4.9 KiB
Text
205 lines
4.9 KiB
Text
# Copyright 2007 Simtec Electronics
|
|
#
|
|
# Licensed under GPLv2
|
|
|
|
config CPU_S3C2440
|
|
bool
|
|
select CPU_ARM920T
|
|
select S3C_GPIO_PULL_UP
|
|
select S3C2410_CLOCK
|
|
select S3C2410_PM if PM
|
|
select S3C2410_GPIO
|
|
select S3C2440_DMA if S3C2410_DMA
|
|
select CPU_S3C244X
|
|
select CPU_LLSERIAL_S3C2440
|
|
help
|
|
Support for S3C2440 Samsung Mobile CPU based systems.
|
|
|
|
config CPU_S3C2442
|
|
bool
|
|
select CPU_ARM920T
|
|
select S3C_GPIO_PULL_DOWN
|
|
select S3C2410_CLOCK
|
|
select S3C2410_GPIO
|
|
select S3C2410_PM if PM
|
|
select CPU_S3C244X
|
|
select CPU_LLSERIAL_S3C2440
|
|
help
|
|
Support for S3C2442 Samsung Mobile CPU based systems.
|
|
|
|
config CPU_S3C244X
|
|
bool
|
|
depends on CPU_S3C2440 || CPU_S3C2442
|
|
help
|
|
Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
|
|
|
|
|
|
|
|
config S3C2440_CPUFREQ
|
|
bool "S3C2440/S3C2442 CPU Frequency scaling support"
|
|
depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
|
|
select S3C2410_CPUFREQ_UTILS
|
|
default y
|
|
help
|
|
CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
|
|
|
|
config S3C2440_XTAL_12000000
|
|
bool
|
|
help
|
|
Indicate that the build needs to support 12MHz system
|
|
crystal.
|
|
|
|
config S3C2440_XTAL_16934400
|
|
bool
|
|
help
|
|
Indicate that the build needs to support 16.9344MHz system
|
|
crystal.
|
|
|
|
config S3C2440_PLL_12000000
|
|
bool
|
|
depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
|
|
default y if CPU_FREQ_S3C24XX_PLL
|
|
help
|
|
PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
|
|
|
|
config S3C2440_PLL_16934400
|
|
bool
|
|
depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
|
|
default y if CPU_FREQ_S3C24XX_PLL
|
|
help
|
|
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
|
|
|
|
config S3C2440_DMA
|
|
bool
|
|
depends on CPU_S3C2440
|
|
help
|
|
Support for S3C2440 specific DMA code5A
|
|
|
|
menu "S3C2440 and S3C2442 Machines"
|
|
|
|
config MACH_ANUBIS
|
|
bool "Simtec Electronics ANUBIS"
|
|
select CPU_S3C2440
|
|
select S3C24XX_DCLK
|
|
select PM_SIMTEC if PM
|
|
select HAVE_PATA_PLATFORM
|
|
select S3C24XX_GPIO_EXTRA64
|
|
select S3C2440_XTAL_12000000
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the Simtec Electronics ANUBIS
|
|
development system
|
|
|
|
config MACH_NEO1973_GTA02
|
|
bool "Openmoko GTA02 / Freerunner phone"
|
|
select CPU_S3C2442
|
|
select MFD_PCF50633
|
|
select PCF50633_GPIO
|
|
select I2C
|
|
select POWER_SUPPLY
|
|
select MACH_NEO1973
|
|
select S3C2410_PWM
|
|
help
|
|
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
|
|
|
|
config MACH_OSIRIS
|
|
bool "Simtec IM2440D20 (OSIRIS) module"
|
|
select CPU_S3C2440
|
|
select S3C24XX_DCLK
|
|
select PM_SIMTEC if PM
|
|
select S3C24XX_GPIO_EXTRA128
|
|
select S3C2440_XTAL_12000000
|
|
select S3C2410_IOTIMING if S3C2440_CPUFREQ
|
|
select S3C_DEV_USB_HOST
|
|
select S3C_DEV_NAND
|
|
help
|
|
Say Y here if you are using the Simtec IM2440D20 module, also
|
|
known as the Osiris.
|
|
|
|
config MACH_OSIRIS_DVS
|
|
tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
|
|
depends on MACH_OSIRIS
|
|
select TPS65010
|
|
help
|
|
Say Y/M here if you want to have dynamic voltage scaling support
|
|
on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
|
|
|
|
The DVS driver alters the voltage supplied to the ARM core
|
|
depending on the frequency it is running at. The driver itself
|
|
does not do any of the frequency alteration, which is left up
|
|
to the cpufreq driver.
|
|
|
|
config MACH_RX3715
|
|
bool "HP iPAQ rx3715"
|
|
select CPU_S3C2440
|
|
select S3C2440_XTAL_16934400
|
|
select PM_H1940 if PM
|
|
select S3C_DEV_NAND
|
|
help
|
|
Say Y here if you are using the HP iPAQ rx3715.
|
|
|
|
config ARCH_S3C2440
|
|
bool "SMDK2440"
|
|
select CPU_S3C2440
|
|
select S3C2440_XTAL_16934400
|
|
select MACH_SMDK
|
|
select S3C_DEV_USB_HOST
|
|
select S3C_DEV_NAND
|
|
help
|
|
Say Y here if you are using the SMDK2440.
|
|
|
|
config MACH_NEXCODER_2440
|
|
bool "NexVision NEXCODER 2440 Light Board"
|
|
select CPU_S3C2440
|
|
select S3C2440_XTAL_12000000
|
|
select S3C_DEV_USB_HOST
|
|
select S3C_DEV_NAND
|
|
help
|
|
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
|
|
|
|
config SMDK2440_CPU2440
|
|
bool "SMDK2440 with S3C2440 CPU module"
|
|
default y if ARCH_S3C2440
|
|
select S3C2440_XTAL_16934400
|
|
select CPU_S3C2440
|
|
|
|
config SMDK2440_CPU2442
|
|
bool "SMDM2440 with S3C2442 CPU module"
|
|
select CPU_S3C2442
|
|
|
|
config MACH_AT2440EVB
|
|
bool "Avantech AT2440EVB development board"
|
|
select CPU_S3C2440
|
|
select S3C_DEV_USB_HOST
|
|
select S3C_DEV_NAND
|
|
help
|
|
Say Y here if you are using the AT2440EVB development board
|
|
|
|
config MACH_MINI2440
|
|
bool "MINI2440 development board"
|
|
select CPU_S3C2440
|
|
select EEPROM_AT24
|
|
select NEW_LEDS
|
|
select LEDS_CLASS
|
|
select LEDS_TRIGGER
|
|
select LEDS_TRIGGER_BACKLIGHT
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
|
|
available via various sources. It can come with a 3.5" or 7" touch LCD.
|
|
|
|
config MACH_RX1950
|
|
bool "HP iPAQ rx1950"
|
|
select CPU_S3C2442
|
|
select S3C24XX_DCLK
|
|
select PM_H1940 if PM
|
|
select I2C
|
|
select S3C2410_PWM
|
|
select S3C_DEV_NAND
|
|
select S3C2410_IOTIMING if S3C2440_CPUFREQ
|
|
select S3C2440_XTAL_16934400
|
|
help
|
|
Say Y here if you're using HP iPAQ rx1950
|
|
|
|
endmenu
|